- 31 Jan, 2016 40 commits
-
-
Eric Dumazet authored
[ Upstream commit ed2e9239 ] When creating a timewait socket, we need to arm the timer before allowing other cpus to find it. The signal allowing cpus to find the socket is setting tw_refcnt to non zero value. As we set tw_refcnt in __inet_twsk_hashdance(), we therefore need to call inet_twsk_schedule() first. This also means we need to remove tw_refcnt changes from inet_twsk_schedule() and let the caller handle it. Note that because we use mod_timer_pinned(), we have the guarantee the timer wont expire before we set tw_refcnt as we run in BH context. To make things more readable I introduced inet_twsk_reschedule() helper. When rearming the timer, we can use mod_timer_pending() to make sure we do not rearm a canceled timer. Note: This bug can possibly trigger if packets of a flow can hit multiple cpus. This does not normally happen, unless flow steering is broken somehow. This explains this bug was spotted ~5 months after its introduction. A similar fix is needed for SYN_RECV sockets in reqsk_queue_hash_req(), but will be provided in a separate patch for proper tracking. Fixes: 789f558c ("tcp/dccp: get rid of central timewait timer") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Ying Cai <ycai@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Aleksandrov authored
[ Upstream commit c6894dec ] After promisc mode management was introduced a bridge device could do dev_set_promiscuity from its ndo_change_rx_flags() callback which in turn can be called after the bridge's addr_list_lock has been taken (e.g. by dev_uc_add). This causes a false positive lockdep splat because the port interfaces' addr_list_lock is taken when br_manage_promisc() runs after the bridge's addr list lock was already taken. To remove the false positive introduce a custom bridge addr_list_lock class and set it on bridge init. A simple way to reproduce this is with the following: $ brctl addbr br0 $ ip l add l br0 br0.100 type vlan id 100 $ ip l set br0 up $ ip l set br0.100 up $ echo 1 > /sys/class/net/br0/bridge/vlan_filtering $ brctl addif br0 eth0 Splat: [ 43.684325] ============================================= [ 43.684485] [ INFO: possible recursive locking detected ] [ 43.684636] 4.4.0-rc8+ #54 Not tainted [ 43.684755] --------------------------------------------- [ 43.684906] brctl/1187 is trying to acquire lock: [ 43.685047] (_xmit_ETHER){+.....}, at: [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.685460] but task is already holding lock: [ 43.685618] (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.686015] other info that might help us debug this: [ 43.686316] Possible unsafe locking scenario: [ 43.686743] CPU0 [ 43.686967] ---- [ 43.687197] lock(_xmit_ETHER); [ 43.687544] lock(_xmit_ETHER); [ 43.687886] *** DEADLOCK *** [ 43.688438] May be due to missing lock nesting notation [ 43.688882] 2 locks held by brctl/1187: [ 43.689134] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81510317>] rtnl_lock+0x17/0x20 [ 43.689852] #1: (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.690575] stack backtrace: [ 43.690970] CPU: 0 PID: 1187 Comm: brctl Not tainted 4.4.0-rc8+ #54 [ 43.691270] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 43.691770] ffffffff826a25c0 ffff8800369fb8e0 ffffffff81360ceb ffffffff826a25c0 [ 43.692425] ffff8800369fb9b8 ffffffff810d0466 ffff8800369fb968 ffffffff81537139 [ 43.693071] ffff88003a08c880 0000000000000000 00000000ffffffff 0000000002080020 [ 43.693709] Call Trace: [ 43.693931] [<ffffffff81360ceb>] dump_stack+0x4b/0x70 [ 43.694199] [<ffffffff810d0466>] __lock_acquire+0x1e46/0x1e90 [ 43.694483] [<ffffffff81537139>] ? netlink_broadcast_filtered+0x139/0x3e0 [ 43.694789] [<ffffffff8153b5da>] ? nlmsg_notify+0x5a/0xc0 [ 43.695064] [<ffffffff810d10f5>] lock_acquire+0xe5/0x1f0 [ 43.695340] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.695623] [<ffffffff815edea5>] _raw_spin_lock_bh+0x45/0x80 [ 43.695901] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.696180] [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.696460] [<ffffffff8150189c>] dev_set_promiscuity+0x3c/0x50 [ 43.696750] [<ffffffffa0586845>] br_port_set_promisc+0x25/0x50 [bridge] [ 43.697052] [<ffffffffa05869aa>] br_manage_promisc+0x8a/0xe0 [bridge] [ 43.697348] [<ffffffffa05826ee>] br_dev_change_rx_flags+0x1e/0x20 [bridge] [ 43.697655] [<ffffffff81501532>] __dev_set_promiscuity+0x132/0x1f0 [ 43.697943] [<ffffffff81501672>] __dev_set_rx_mode+0x82/0x90 [ 43.698223] [<ffffffff815072de>] dev_uc_add+0x5e/0x80 [ 43.698498] [<ffffffffa05b3c62>] vlan_device_event+0x542/0x650 [8021q] [ 43.698798] [<ffffffff8109886d>] notifier_call_chain+0x5d/0x80 [ 43.699083] [<ffffffff810988b6>] raw_notifier_call_chain+0x16/0x20 [ 43.699374] [<ffffffff814f456e>] call_netdevice_notifiers_info+0x6e/0x80 [ 43.699678] [<ffffffff814f4596>] call_netdevice_notifiers+0x16/0x20 [ 43.699973] [<ffffffffa05872be>] br_add_if+0x47e/0x4c0 [bridge] [ 43.700259] [<ffffffffa058801e>] add_del_if+0x6e/0x80 [bridge] [ 43.700548] [<ffffffffa0588b5f>] br_dev_ioctl+0xaf/0xc0 [bridge] [ 43.700836] [<ffffffff8151a7ac>] dev_ifsioc+0x30c/0x3c0 [ 43.701106] [<ffffffff8151aac9>] dev_ioctl+0xf9/0x6f0 [ 43.701379] [<ffffffff81254345>] ? mntput_no_expire+0x5/0x450 [ 43.701665] [<ffffffff812543ee>] ? mntput_no_expire+0xae/0x450 [ 43.701947] [<ffffffff814d7b02>] sock_do_ioctl+0x42/0x50 [ 43.702219] [<ffffffff814d8175>] sock_ioctl+0x1e5/0x290 [ 43.702500] [<ffffffff81242d0b>] do_vfs_ioctl+0x2cb/0x5c0 [ 43.702771] [<ffffffff81243079>] SyS_ioctl+0x79/0x90 [ 43.703033] [<ffffffff815eebb6>] entry_SYSCALL_64_fastpath+0x16/0x7a CC: Vlad Yasevich <vyasevic@redhat.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Bridge list <bridge@lists.linux-foundation.org> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 2796d0c6 ("bridge: Automatically manage port promiscuous mode.") Reported-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 34ae6a1a ] When a tunnel decapsulates the outer header, it has to comply with RFC 6080 and eventually propagate CE mark into inner header. It turns out IP6_ECN_set_ce() does not correctly update skb->csum for CHECKSUM_COMPLETE packets, triggering infamous "hw csum failure" messages and stack traces. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Rabin Vincent authored
[ Upstream commit 229394e8 ] On ARM64, a BUG() is triggered in the eBPF JIT if a filter with a constant shift that can't be encoded in the immediate field of the UBFM/SBFM instructions is passed to the JIT. Since these shifts amounts, which are negative or >= regsize, are invalid, reject them in the eBPF verifier and the classic BPF filter checker, for all architectures. Signed-off-by:
Rabin Vincent <rabin@rab.in> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7aaed57c ] Ivaylo Dimitrov reported a regression caused by commit 7866a621 ("dev: add per net_device packet type chains"). skb->dev becomes NULL and we crash in __netif_receive_skb_core(). Before above commit, different kind of bugs or corruptions could happen without major crash. But the root cause is that phonet_rcv() can queue skb without checking if skb is shared or not. Many thanks to Ivaylo Dimitrov for his help, diagnosis and tests. Reported-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by:
-
Karl Heiss authored
[ Upstream commit 03d84a5f ] Commit 1f718f0f ("bonding: populate neighbour's private on enslave") undoes the fix provided by commit c2edacf8 ("bonding / ipv6: no addrconf for slaves separately from master") by effectively setting the slave flag after the slave has been opened. If the slave comes up quickly enough, it will go through the IPv6 addrconf before the slave flag has been set and will get a link local IPv6 address. In order to ensure that addrconf knows to ignore the slave devices on state change, set IFF_SLAVE before dev_open() during bonding enslavement. Fixes: 1f718f0f ("bonding: populate neighbour's private on enslave") Signed-off-by:
Karl Heiss <kheiss@gmail.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 9207f9d4 ] Skb_gso_segment() uses skb control block during segmentation. This patch adds 32-bytes room for previous control block which will be copied into all resulting segments. This patch fixes kernel crash during fragmenting forwarded packets. Fragmentation requires valid IP CB in skb for clearing ip options. Also patch removes custom save/restore in ovs code, now it's redundant. Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Link: http://lkml.kernel.org/r/CALYGNiP-0MZ-FExV2HutTvE9U-QQtkKSoE--KN=JQE5STYsjAA@mail.gmail.comSigned-off-by:
-
Michal Kubeček authored
[ Upstream commit 40ba3302 ] Commit acf8dd0a ("udp: only allow UFO for packets from SOCK_DGRAM sockets") disallows UFO for packets sent from raw sockets. We need to do the same also for SOCK_DGRAM sockets with SO_NO_CHECK options, even if for a bit different reason: while such socket would override the CHECKSUM_PARTIAL set by ip_ufo_append_data(), gso_size is still set and bad offloading flags warning is triggered in __skb_gso_segment(). In the IPv6 case, SO_NO_CHECK option is ignored but we need to disallow UFO for packets sent by sockets with UDP_NO_CHECK6_TX option. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Tested-by:
Shannon Nelson <shannon.nelson@intel.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 83d15e70 ] For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno and CUBIC, per RFC 5681 (equation 4). tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh value if the intended reduction is as big or bigger than the current cwnd. Congestion control modules should never return a zero or negative ssthresh. A zero ssthresh generally results in a zero cwnd, causing the connection to stall. A negative ssthresh value will be interpreted as a u32 and will set a target cwnd for PRR near 4 billion. Oleksandr Natalenko reported that a system using tcp_yeah with ECN could see a warning about a prior_cwnd of 0 in tcp_cwnd_reduction(). Testing verified that this was due to tcp_yeah_ssthresh() misbehaving in this way. Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 3e4006f0 ] When first SYNACK is sent, we already hold rcu_read_lock(), but this is not true if a SYNACK is retransmitted, as a timer (soft) interrupt does not hold rcu_read_lock() Fixes: 45f6fad8 ("ipv6: add complete rcu protection around np->opt") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 320f1a4a ] proc_dostring() needs an initialized destination string, while the one provided in proc_sctp_do_hmac_alg() contains stack garbage. Thus, writing to cookie_hmac_alg would strlen() that garbage and end up accessing invalid memory. Fixes: 3c68198e ("sctp: Make hmac algorithm selection for cookie generation dynamic") Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 07b9b37c ] When a vxlan interface is created, the driver checks that there is not another vxlan interface with the same properties. To do this, it checks the existing vxlan udp socket. Since commit 1c51a915, the creation of the vxlan socket is done only when the interface is set up, thus it breaks that test. Example: $ ip l a vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip l a vxlan11 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip -br l | grep vxlan vxlan10 DOWN f2:55:1c:6a:fb:00 <BROADCAST,MULTICAST> vxlan11 DOWN 7a:cb:b9:38:59:0d <BROADCAST,MULTICAST> Instead of checking sockets, let's loop over the vxlan iface list. Fixes: 1c51a915 ("vxlan: fix race caused by dropping rtnl_unlock") Reported-by:
Thomas Faivre <thomas.faivre@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Francesco Ruggeri authored
[ Upstream commit 07a5d384 ] dst_release should not access dst->flags after decrementing __refcnt to 0. The dst_entry may be in dst_busy_list and dst_gc_task may dst_destroy it before dst_release gets a chance to access dst->flags. Fixes: d69bbf88 ("net: fix a race in dst_release()") Fixes: 27b75c95 ("net: avoid RCU for NOCACHE dst") Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Acked-by:
-
John Fastabend authored
[ Upstream commit 73c20a8b ] When a qdisc is using per cpu stats (currently just the ingress qdisc) only the bstats are being freed. This also free's the qstats. Fixes: b0ab6f92 ("net: sched: enable per cpu qstats") Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Acked-by:
-
Rabin Vincent authored
[ Upstream commit 55795ef5 ] The SKF_AD_ALU_XOR_X ancillary is not like the other ancillary data instructions since it XORs A with X while all the others replace A with some loaded value. All the BPF JITs fail to clear A if this is used as the first instruction in a filter. This was found using american fuzzy lop. Add a helper to determine if A needs to be cleared given the first instruction in a filter, and use this in the JITs. Except for ARM, the rest have only been compile-tested. Fixes: 34805931 ("net: filter: get rid of BPF_S_* enum") Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit ff621985 ] [I stole this patch from Eric Biederman. He wrote:] > There is no defined mechanism to pass network namespace information > into /sbin/bridge-stp therefore don't even try to invoke it except > for bridge devices in the initial network namespace. > > It is possible for unprivileged users to cause /sbin/bridge-stp to be > invoked for any network device name which if /sbin/bridge-stp does not > guard against unreasonable arguments or being invoked twice on the > same network device could cause problems. [Hannes: changed patch using netns_eq] Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
willy tarreau authored
[ Upstream commit 712f4aad ] It is possible for a process to allocate and accumulate far more FDs than the process' limit by sending them over a unix socket then closing them to keep the process' fd count low. This change addresses this problem by keeping track of the number of FDs in flight per user and preventing non-privileged processes from having more FDs in flight than their configured FD limit. Reported-by: socketpair@gmail.com Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Mitigates: CVE-2013-4312 (Linux 2.0+) Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 55285bf0 ] Dmitry reports memleak with syskaller program. Problem is that connector bumps skb usecount but might not invoke callback. So move skb_get to where we invoke the callback. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Xin Long authored
[ Upstream commit 068d8bd3 ] In sctp_close, sctp_make_abort_user may return NULL because of memory allocation failure. If this happens, it will bypass any state change and never free the assoc. The assoc has no chance to be freed and it will be kept in memory with the state it had even after the socket is closed by sctp_close(). So if sctp_make_abort_user fails to allocate memory, we should abort the asoc via sctp_primitive_ABORT as well. Just like the annotation in sctp_sf_cookie_wait_prm_abort and sctp_sf_do_9_1_prm_abort said, "Even if we can't send the ABORT due to low memory delete the TCB. This is a departure from our typical NOMEM handling". But then the chunk is NULL (low memory) and the SCTP_CMD_REPLY cmd would dereference the chunk pointer, and system crash. So we should add SCTP_CMD_REPLY cmd only when the chunk is not NULL, just like other places where it adds SCTP_CMD_REPLY cmd. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 1dfddff5 ] NCM buffer sizes are negotiated with the device independently of the network device MTU. The RX buffers are allocated by the usbnet framework based on the rx_urb_size value set by cdc_ncm. A single RX buffer can hold a number of MTU sized packets. The default usbnet change_mtu ndo only modifies rx_urb_size if it is equal to hard_mtu. And the cdc_ncm driver will set rx_urb_size and hard_mtu independently of each other, based on dwNtbInMaxSize and dwNtbOutMaxSize respectively. It was therefore assumed that usbnet_change_mtu() would never touch rx_urb_size. This failed to consider the case where dwNtbInMaxSize and dwNtbOutMaxSize happens to be equal. Fix by implementing an NCM specific change_mtu ndo, modifying the netdev MTU without touching the buffer size settings. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 5449a5ca ] When sysctl performs restrict writes, it allows to write from a middle position of a sysctl file, which requires us to initialize the table data before calling proc_dostring() for the write case. Fixes: 3d1bec99 ("ipv6: introduce secret_stable to ipv6_devconf") Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Andrey Ryabinin authored
[ Upstream commit e459dfee ] ip6addrlbl_get() has never worked. If ip6addrlbl_hold() succeeded, ip6addrlbl_get() will exit with '-ESRCH'. If ip6addrlbl_hold() failed, ip6addrlbl_get() will use about to be free ip6addrlbl_entry pointer. Fix this by inverting ip6addrlbl_hold() check. Fixes: 2a8cc6c8 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.") Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by:
Cong Wang <cwang@twopensource.com> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Vijay Pandurangan authored
[ Upstream commit ce8c839b ] Packets that arrive from real hardware devices have ip_summed == CHECKSUM_UNNECESSARY if the hardware verified the checksums, or CHECKSUM_NONE if the packet is bad or it was unable to verify it. The current version of veth will replace CHECKSUM_NONE with CHECKSUM_UNNECESSARY, which causes corrupt packets routed from hardware to a veth device to be delivered to the application. This caused applications at Twitter to receive corrupt data when network hardware was corrupting packets. We believe this was added as an optimization to skip computing and verifying checksums for communication between containers. However, locally generated packets have ip_summed == CHECKSUM_PARTIAL, so the code as written does nothing for them. As far as we can tell, after removing this code, these packets are transmitted from one stack to another unmodified (tcpdump shows invalid checksums on both sides, as expected), and they are delivered correctly to applications. We didn’t test every possible network configuration, but we tried a few common ones such as bridging containers, using NAT between the host and a container, and routing from hardware devices to containers. We have effectively deployed this in production at Twitter (by disabling RX checksum offloading on veth devices). This code dates back to the first version of the driver, commit <e314dbdc> ("[NET]: Virtual ethernet device driver"), so I suspect this bug occurred mostly because the driver API has evolved significantly since then. Commit <0b796750> ("net/veth: Fix packet checksumming") (in December 2010) fixed this for packets that get created locally and sent to hardware devices, by not changing CHECKSUM_PARTIAL. However, the same issue still occurs for packets coming in from hardware devices. Co-authored-by:
Evan Jones <ej@evanjones.ca> Signed-off-by:
Vijay Pandurangan <vijayp@vijayp.ca> Acked-by:
-
Oliver Neukum authored
commit 1eaf35e4 upstream. The module should fail to load. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Oliver Freyermuth authored
commit f7d7f59a upstream. Add the USB device ID for ELV Marble Sound Board 1. Signed-off-by:
Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit abdc9a3b upstream. The code expects the loop to end with "retries" set to zero but, because it is a post-op, it will end set to -1. I have fixed this by moving the decrement inside the loop. Fixes: 014aa2a3 ('USB: ipaq: minor ipaq_open() cleanup.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alan Stern authored
commit e50293ef upstream. Commit 8520f380 ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Alexandru Cornea <alexandru.cornea@intel.com> Tested-by:
-
Antti Palosaari authored
commit aa0850e1 upstream. Driver requested device firmware version string during probe using only 24 byte long buffer. That buffer is too small for newer firmware versions, which causes device firmware hang - device stops responding to any commands after that. Increase buffer size to 128 which should be enough for any current and future version strings. Link: https://github.com/airspy/host/issues/27Reported-by:
Benjamin Vernoux <bvernoux@gmail.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Chunfeng Yun authored
commit 096b110a upstream. if a full speed hub connects to a high speed hub which supports MTT, the MTT field of its slot context will be set to 1 when xHCI driver setups an xHCI virtual device in xhci_setup_addressable_virt_dev(); once usb core fetch its hub descriptor, and need to update the xHC's internal data structures for the device, the HUB field of its slot context will be set to 1 too, meanwhile MTT is also set before, this will cause configure endpoint command fail, so in the case, we should clear MTT to 0 for full speed hub according to section 6.2.2 Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Vinod Koul authored
commit a1068045 upstream. The detection of direction for compress was only taking into account codec capabilities and not CPU ones. Fix this by checking the CPU side capabilities as well Tested-by:
Ashish Panwar <ashish.panwar@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Nikesh Oswal authored
commit e73694d8 upstream. For a sample rate of 12kHz the bclk was taken from the 44.1kHz table as we test for a multiple of 8kHz. This patch fixes this issue by testing for multiples of 4kHz instead. Signed-off-by:
Nikesh Oswal <Nikesh.Oswal@cirrus.com> Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Peter Ujfalusi authored
commit e2a0c9fa upstream. The condition for checking for XDAT being cleared was not correct. Fixes: 36bcecd0 ("ASoC: davinci-mcasp: Correct TX start sequence") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Mans Rullgard authored
commit 1ea5998a upstream. Attempting to use this codec driver triggers a BUG() in regcache_sync() since no cache type is set. The register map of this device is fairly small and has few holes so a flat cache is suitable. Signed-off-by:
Mans Rullgard <mans@mansr.com> Acked-by:
-
John Keeping authored
commit 84ebac4d upstream. This is using completely the wrong mask and value when updating the register. Since the correct values are already defined in the header, switch to using a table with explicit constants rather than shifting the array index. Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
-
Sachin Pandhare authored
commit e9f96bc5 upstream. From datasheet: R17408 (4400h) HPF_C_1 R17409 (4401h) HPF_C_0 17048 -> 17408 (0x4400) 17049 -> 17409 (0x4401) Signed-off-by:
Sachin Pandhare <sachinpandhare@gmail.com> Acked-by:
-
Kuninori Morimoto authored
commit 021c5d94 upstream. cfcefe01 ("ASoC: rsnd: add recovery support for under/over flow error on SRC") added SCU_SYS_INT_EN1 address, but it should be 0x1d4, not 0x1c4. This patch fixup it. Fixes: cfcefe01 ("ASoC: rsnd: add recovery support for under/over flow error on SRC") Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Takashi Iwai authored
commit 230323da upstream. Currently ALSA timer device doesn't take the disconnection into account very well; it merely unlinks the timer device at disconnection callback but does nothing else. Because of this, when an application accessing the timer device is disconnected, it may release the resource before actually closed. In most cases, it results in a warning message indicating a leftover timer instance like: ALSA: timer xxxx is busy? But basically this is an open race. This patch tries to address it. The strategy is like other ALSA devices: namely, - Manage card's refcount at each open/close - Wake up the pending tasks at disconnection - Check the shutdown flag appropriately at each possible call Note that this patch has one ugly hack to handle the wakeup of pending tasks. It'd be cleaner to introduce a new disconnect op to snd_timer_instance ops. But since it would lead to internal ABI breakage and it eventually increase my own work when backporting to stable kernels, I took a different path to implement locally in timer.c. A cleanup patch will follow at next for 4.5 kernel. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109431Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 991f86d7 upstream. As HD-audio driver does deferred probe internally via workqueue, the driver might go into the mixed state doing both probe and remove when the module gets unloaded during the probe work. This eventually triggers an Oops, unsurprisingly. For avoiding this race, we just need to flush the pending probe work explicitly before actually starting the resource release. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=960710Signed-off-by:
-
Takashi Iwai authored
commit db8948e6 upstream. ASUS N550JX (PCI SSID 1043:13df) requires the same fixup for a bass speaker output pin as other N550 models. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110001Signed-off-by:
-
Takashi Iwai authored
commit c0bcdbdf upstream. When a TLV ioctl with numid zero is handled, the driver may spew a kernel warning with a stack trace at each call. The check was intended obviously only for a kernel driver, but not for a user interaction. Let's fix it. This was spotted by syzkaller fuzzer. Reported-by:
-
