- 16 Sep, 2019 10 commits
-
-
Gustavo Romero authored
commit 8205d5d9 upstream. When we take an FP unavailable exception in a transaction we have to account for the hardware FP TM checkpointed registers being incorrect. In this case for this process we know the current and checkpointed FP registers must be the same (since FP wasn't used inside the transaction) hence in the thread_struct we copy the current FP registers to the checkpointed ones. This copy is done in tm_reclaim_thread(). We use thread->ckpt_regs.msr to determine if FP was on when in userspace. thread->ckpt_regs.msr represents the state of the MSR when exiting userspace. This is setup by check_if_tm_restore_required(). Unfortunatley there is an optimisation in giveup_all() which returns early if tsk->thread.regs->msr (via local variable `usermsr`) has FP=VEC=VSX=SPE=0. This optimisation means that check_if_tm_restore_required() is not called and hence thread->ckpt_regs.msr is not updated and will contain an old value. This can happen if due to load_fp=255 we start a userspace process with MSR FP=1 and then we are context switched out. In this case thread->ckpt_regs.msr will contain FP=1. If that same process is then context switched in and load_fp overflows, MSR will have FP=0. If that process now enters a transaction and does an FP instruction, the FP unavailable will not update thread->ckpt_regs.msr (the bug) and MSR FP=1 will be retained in thread->ckpt_regs.msr. tm_reclaim_thread() will then not perform the required memcpy and the checkpointed FP regs in the thread struct will contain the wrong values. The code path for this happening is: Userspace: Kernel Start userspace with MSR FP/VEC/VSX/SPE=0 TM=1 < ----- ... tbegin bne fp instruction FP unavailable ---- > fp_unavailable_tm() tm_reclaim_current() tm_reclaim_thread() giveup_all() return early since FP/VMX/VSX=0 /* ckpt MSR not updated (Incorrect) */ tm_reclaim() /* thread_struct ckpt FP regs contain junk (OK) */ /* Sees ckpt MSR FP=1 (Incorrect) */ no memcpy() performed /* thread_struct ckpt FP regs not fixed (Incorrect) */ tm_recheckpoint() /* Put junk in hardware checkpoint FP regs */ .... < ----- Return to userspace with MSR TM=1 FP=1 with junk in the FP TM checkpoint TM rollback reads FP junk This is a data integrity problem for the current process as the FP registers are corrupted. It's also a security problem as the FP registers from one process may be leaked to another. This patch moves up check_if_tm_restore_required() in giveup_all() to ensure thread->ckpt_regs.msr is updated correctly. A simple testcase to replicate this will be posted to tools/testing/selftests/powerpc/tm/tm-poison.c Similarly for VMX. This fixes CVE-2019-15030. Fixes: f48e91e8 ("powerpc/tm: Fix FP and VMX register corruption") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by:
Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190904045529.23002-1-gromero@linux.vnet.ibm.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tiwei Bie authored
commit 264b563b upstream. Since vhost_exceeds_weight() was introduced, callers need to specify the packet weight and byte weight in vhost_dev_init(). Note that, the packet weight isn't counted in this patch to keep the original behavior unchanged. Fixes: e82b9b07 ("vhost: introduce vhost_exceeds_weight()") Cc: stable@vger.kernel.org Signed-off-by:
Tiwei Bie <tiwei.bie@intel.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Tiwei Bie authored
commit 93d2c4de upstream. Since below commit, callers need to specify the iov_limit in vhost_dev_init() explicitly. Fixes: b46a0bf7 ("vhost: fix OOB in get_rx_bufs()") Cc: stable@vger.kernel.org Signed-off-by:
-
Dan Carpenter authored
commit 08b0c891 upstream. We recently added a kfree() after the end of the loop: if (retries == RETRIES) { kfree(reply); return -EINVAL; } There are two problems. First the test is wrong and because retries equals RETRIES if we succeed on the last iteration through the loop. Second if we fail on the last iteration through the loop then the kfree is a double free. When you're reading this code, please note the break statement at the end of the while loop. This patch changes the loop so that if it's not successful then "reply" is NULL and we can test for that afterward. Cc: <stable@vger.kernel.org> Fixes: 6b7c3b86 ("drm/vmwgfx: fix memory leak when too many retries have occurred") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Liangyan authored
commit 5e2d2cc2 upstream. do_sched_cfs_period_timer() will refill cfs_b runtime and call distribute_cfs_runtime to unthrottle cfs_rq, sometimes cfs_b->runtime will allocate all quota to one cfs_rq incorrectly, then other cfs_rqs attached to this cfs_b can't get runtime and will be throttled. We find that one throttled cfs_rq has non-negative cfs_rq->runtime_remaining and cause an unexpetced cast from s64 to u64 in snippet: distribute_cfs_runtime() { runtime = -cfs_rq->runtime_remaining + 1; } The runtime here will change to a large number and consume all cfs_b->runtime in this cfs_b period. According to Ben Segall, the throttled cfs_rq can have account_cfs_rq_runtime called on it because it is throttled before idle_balance, and the idle_balance calls update_rq_clock to add time that is accounted to the task. This commit prevents cfs_rq to be assgined new runtime if it has been throttled until that distribute_cfs_runtime is called. Signed-off-by:
Liangyan <liangyan.peng@linux.alibaba.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Valentin Schneider <valentin.schneider@arm.com> Reviewed-by:
Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: shanpeic@linux.alibaba.com Cc: stable@vger.kernel.org Cc: xlpang@linux.alibaba.com Fixes: d3d9dc33 ("sched: Throttle entities exceeding their allowed bandwidth") Link: https://lkml.kernel.org/r/20190826121633.6538-1-liangyan.peng@linux.alibaba.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Hui Wang authored
commit 2a36c16e upstream. This ThinkCentre machine has a new realtek codec alc222, it is not in the support list, we add it in the realtek.c then this machine can apply FIXUPs for the realtek codec. And this machine has two front mics which can't be handled by PA so far, it uses the pin 0x18 and 0x19 as the front mics, as a result the existing FIXUP ALC294_FIXUP_LENOVO_MIC_LOCATION doesn't work on this machine. Fortunately another FIXUP ALC283_FIXUP_HEADSET_MIC also can change the location for one of the two mics on this machine. Link: https://lore.kernel.org/r/20190904055327.9883-1-hui.wang@canonical.comSigned-off-by:
Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jian-Hong Pan authored
commit 60083f9e upstream. Original pin node values of ASUS UX431FL with ALC294: 0x12 0xb7a60140 0x13 0x40000000 0x14 0x90170110 0x15 0x411111f0 0x16 0x411111f0 0x17 0x90170111 0x18 0x411111f0 0x19 0x411111f0 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x4066852d 0x1e 0x411111f0 0x1f 0x411111f0 0x21 0x04211020 1. Has duplicated internal speakers (0x14 & 0x17) which makes the output route become confused. So, the output volume cannot be changed by setting. 2. Misses the headset mic pin node. This patch disables the confusing speaker (NID 0x14) and enables the headset mic (NID 0x19). Link: https://lore.kernel.org/r/20190902100054.6941-1-jian-hong@endlessm.comSigned-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sam Bazley authored
commit d33cd42d upstream. HP Pavilion 15 (AMD Ryzen-based model) with 103c:84e7 needs the same quirk like HP Envy/Spectre x360 for enabling the mute LED over Mic3 pin. [ rearranged in the SSID number order by tiwai ] Signed-off-by:
Sam Bazley <sambazley@fastmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 89781d08 upstream. The recent change to shuffle the codec initialization procedure for Realtek via commit 607ca3bd ("ALSA: hda/realtek - EAPD turn on later") caused the silent output on some machines. This change was supposed to be safe, but it isn't actually; some devices have quirk setups to override the EAPD via COEF or BTL in the additional verb table, which is applied at the beginning of snd_hda_gen_init(). And this EAPD setup is again overridden in alc_auto_init_amp(). For recovering from the regression, tell snd_hda_gen_init() not to apply the verbs there by a new flag, then apply the verbs in alc_init(). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204727 Fixes: 607ca3bd ("ALSA: hda/realtek - EAPD turn on later") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 333f3143 upstream. Since the chained quirks via chained_before flag is applied before the depth check, it may lead to the endless recursive calls, when the chain were set up incorrectly. Fix it by moving the depth check at the beginning of the loop. Fixes: 1f578250 ("ALSA: hda - Add chained_before flag to the fixup entry") Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 10 Sep, 2019 30 commits
-
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
[ Upstream commit 950b07c1 ] This reverts commit 558682b5. Chris Wilson reports that it breaks his CPU hotplug test scripts. In particular, it breaks offlining and then re-onlining the boot CPU, which we treat specially (and the BIOS does too). The symptoms are that we can offline the CPU, but it then does not come back online again: smpboot: CPU 0 is now offline smpboot: Booting Node 0 Processor 0 APIC 0x0 smpboot: do_boot_cpu failed(-1) to wakeup CPU#0 Thomas says he knows why it's broken (my personal suspicion: our magic handling of the "cpu0_logical_apicid" thing), but for 5.3 the right fix is to just revert it, since we've never touched the LDR bits before, and it's not worth the risk to do anything else at this stage. [ Hotpluging of the boot CPU is special anyway, and should be off by default. See the "BOOTPARAM_HOTPLUG_CPU0" config option and the cpu0_hotplug kernel parameter. In general you should not do it, and it has various known limitations (hibernate and suspend require the boot CPU, for example). But it should work, even if the boot CPU is special and needs careful treatment - Linus ] Link: https://lore.kernel.org/lkml/156785100521.13300.14461504732265570003@skylake-alporthouse-com/Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Bandan Das <bsd@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Luis Henriques authored
[ Upstream commit 5c498950 ] Signed-off-by:
Luis Henriques <lhenriques@suse.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Kirill A. Shutemov authored
[ Upstream commit c96e8483 ] Gustavo noticed that 'new' can be left uninitialized if 'bios_start' happens to be less or equal to 'entry->addr + entry->size'. Initialize the variable at the begin of the iteration to the current value of 'bios_start'. Fixes: 0a46fff2 ("x86/boot/compressed/64: Fix boot on machines with broken E820 table") Reported-by:
"Gustavo A. R. Silva" <gustavo@embeddedor.com> Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Andre Przywara authored
[ Upstream commit 2e16f3e9 ] At the moment we initialise the target *mask* of a virtual IRQ to the VCPU it belongs to, even though this mask is only defined for GICv2 and quickly runs out of bits for many GICv3 guests. This behaviour triggers an UBSAN complaint for more than 32 VCPUs: ------ [ 5659.462377] UBSAN: Undefined behaviour in virt/kvm/arm/vgic/vgic-init.c:223:21 [ 5659.471689] shift exponent 32 is too large for 32-bit type 'unsigned int' ------ Also for GICv3 guests the reporting of TARGET in the "vgic-state" debugfs dump is wrong, due to this very same problem. Because there is no requirement to create the VGIC device before the VCPUs (and QEMU actually does it the other way round), we can't safely initialise mpidr or targets in kvm_vgic_vcpu_init(). But since we touch every private IRQ for each VCPU anyway later (in vgic_init()), we can just move the initialisation of those fields into there, where we definitely know the VGIC type. On the way make sure we really have either a VGICv2 or a VGICv3 device, since the existing code is just checking for "VGICv3 or not", silently ignoring the uninitialised case. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Reported-by:
Dave Martin <dave.martin@arm.com> Tested-by:
Julien Grall <julien.grall@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
David Howells authored
[ Upstream commit a5fb8e6c ] Fix a leak on the cell refcount in afs_lookup_cell_rcu() due to non-clearance of the default error in the case a NULL cell name is passed and the workstation default cell is used. Also put a bit at the end to make sure we don't leak a cell ref if we're going to be returning an error. This leak results in an assertion like the following when the kafs module is unloaded: AFS: Assertion failed 2 == 1 is false 0x2 == 0x1 is false ------------[ cut here ]------------ kernel BUG at fs/afs/cell.c:770! ... RIP: 0010:afs_manage_cells+0x220/0x42f [kafs] ... process_one_work+0x4c2/0x82c ? pool_mayday_timeout+0x1e1/0x1e1 ? do_raw_spin_lock+0x134/0x175 worker_thread+0x336/0x4a6 ? rescuer_thread+0x4af/0x4af kthread+0x1de/0x1ee ? kthread_park+0xd4/0xd4 ret_from_fork+0x24/0x30 Fixes: 989782dc ("afs: Overhaul cell database management") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Andrew Jones authored
[ Upstream commit 2113c5f6 ] If after an MMIO exit to userspace a VCPU is immediately run with an immediate_exit request, such as when a signal is delivered or an MMIO emulation completion is needed, then the VCPU completes the MMIO emulation and immediately returns to userspace. As the exit_reason does not get changed from KVM_EXIT_MMIO in these cases we have to be careful not to complete the MMIO emulation again, when the VCPU is eventually run again, because the emulation does an instruction skip (and doing too many skips would be a waste of guest code :-) We need to use additional VCPU state to track if the emulation is complete. As luck would have it, we already have 'mmio_needed', which even appears to be used in this way by other architectures already. Fixes: 0d640732 ("arm64: KVM: Skip MMIO insn after emulation") Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
Luis Henriques authored
[ Upstream commit af8a85a4 ] Calling ceph_buffer_put() in fill_inode() may result in freeing the i_xattrs.blob buffer while holding the i_ceph_lock. This can be fixed by postponing the call until later, when the lock is released. The following backtrace was triggered by fstests generic/070. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 3852, name: kworker/0:4 6 locks held by kworker/0:4/3852: #0: 000000004270f6bb ((wq_completion)ceph-msgr){+.+.}, at: process_one_work+0x1b8/0x5f0 #1: 00000000eb420803 ((work_completion)(&(&con->work)->work)){+.+.}, at: process_one_work+0x1b8/0x5f0 #2: 00000000be1c53a4 (&s->s_mutex){+.+.}, at: dispatch+0x288/0x1476 #3: 00000000559cb958 (&mdsc->snap_rwsem){++++}, at: dispatch+0x2eb/0x1476 #4: 000000000d5ebbae (&req->r_fill_mutex){+.+.}, at: dispatch+0x2fc/0x1476 #5: 00000000a83d0514 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: fill_inode.isra.0+0xf8/0xf70 CPU: 0 PID: 3852 Comm: kworker/0:4 Not tainted 5.2.0+ #441 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Workqueue: ceph-msgr ceph_con_workfn Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 fill_inode.isra.0+0xa9b/0xf70 ceph_fill_trace+0x13b/0xc70 ? dispatch+0x2eb/0x1476 dispatch+0x320/0x1476 ? __mutex_unlock_slowpath+0x4d/0x2a0 ceph_con_workfn+0xc97/0x2ec0 ? process_one_work+0x1b8/0x5f0 process_one_work+0x244/0x5f0 worker_thread+0x4d/0x3e0 kthread+0x105/0x140 ? process_one_work+0x5f0/0x5f0 ? kthread_park+0x90/0x90 ret_from_fork+0x3a/0x50 Signed-off-by:
-
Luis Henriques authored
[ Upstream commit 12fe3dda ] Calling ceph_buffer_put() in __ceph_build_xattrs_blob() may result in freeing the i_xattrs.blob buffer while holding the i_ceph_lock. This can be fixed by having this function returning the old blob buffer and have the callers of this function freeing it when the lock is released. The following backtrace was triggered by fstests generic/117. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 649, name: fsstress 4 locks held by fsstress/649: #0: 00000000a7478e7e (&type->s_umount_key#19){++++}, at: iterate_supers+0x77/0xf0 #1: 00000000f8de1423 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: ceph_check_caps+0x7b/0xc60 #2: 00000000562f2b27 (&s->s_mutex){+.+.}, at: ceph_check_caps+0x3bd/0xc60 #3: 00000000f83ce16a (&mdsc->snap_rwsem){++++}, at: ceph_check_caps+0x3ed/0xc60 CPU: 1 PID: 649 Comm: fsstress Not tainted 5.2.0+ #439 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 __ceph_build_xattrs_blob+0x12b/0x170 __send_cap+0x302/0x540 ? __lock_acquire+0x23c/0x1e40 ? __mark_caps_flushing+0x15c/0x280 ? _raw_spin_unlock+0x24/0x30 ceph_check_caps+0x5f0/0xc60 ceph_flush_dirty_caps+0x7c/0x150 ? __ia32_sys_fdatasync+0x20/0x20 ceph_sync_fs+0x5a/0x130 iterate_supers+0x8f/0xf0 ksys_sync+0x4f/0xb0 __ia32_sys_sync+0xa/0x10 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fc6409ab617 Signed-off-by:
-
Luis Henriques authored
[ Upstream commit 86968ef2 ] Calling ceph_buffer_put() in __ceph_setxattr() may end up freeing the i_xattrs.prealloc_blob buffer while holding the i_ceph_lock. This can be fixed by postponing the call until later, when the lock is released. The following backtrace was triggered by fstests generic/117. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 650, name: fsstress 3 locks held by fsstress/650: #0: 00000000870a0fe8 (sb_writers#8){.+.+}, at: mnt_want_write+0x20/0x50 #1: 00000000ba0c4c74 (&type->i_mutex_dir_key#6){++++}, at: vfs_setxattr+0x55/0xa0 #2: 000000008dfbb3f2 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: __ceph_setxattr+0x297/0x810 CPU: 1 PID: 650 Comm: fsstress Not tainted 5.2.0+ #437 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 __ceph_setxattr+0x2b4/0x810 __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x59/0xf0 vfs_setxattr+0x81/0xa0 setxattr+0x115/0x230 ? filename_lookup+0xc9/0x140 ? rcu_read_lock_sched_held+0x74/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x142/0x1a0 ? mnt_want_write+0x20/0x50 path_setxattr+0xba/0xd0 __x64_sys_lsetxattr+0x24/0x30 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7ff23514359a Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit e4427372 ] test_msr_platform_info_disabled() generates EXIT_SHUTDOWN but VMCB state is undefined after that so an attempt to launch this guest again from test_msr_platform_info_enabled() fails. Reorder the tests to make test pass. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
[ Upstream commit 54577e50 ] state_test and smm_test are failing on older processors that do not have xcr0. This is because on those processor KVM does provide support for KVM_GET/SET_XSAVE (to avoid having to rely on the older KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS. Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 2323d7ba ] In fault_opcodes_write(), 'data' is allocated through kcalloc(). However, it is not deallocated in the following execution if an error occurs, leading to memory leaks. To fix this issue, introduce the 'free_data' label to free 'data' before returning the error. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Acked-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Link: https://lore.kernel.org/r/1566154486-3713-1-git-send-email-wenwen@cs.uga.eduSigned-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit b08afa06 ] In fault_opcodes_read(), 'data' is not deallocated if debugfs_file_get() fails, leading to a memory leak. To fix this bug, introduce the 'free_data' label to free 'data' before returning the error. Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 5c1baaa8 ] In mlx4_ib_alloc_pv_bufs(), 'tun_qp->tx_ring' is allocated through kcalloc(). However, it is not always deallocated in the following execution if an error occurs, leading to memory leaks. To fix this issue, free 'tun_qp->tx_ring' whenever an error occurs. Signed-off-by:
-
Anton Eidelman authored
[ Upstream commit 504db087 ] nvme_state_set_live() making a path available triggers requeue_work in order to resubmit requests that ended up on requeue_list when no paths were available. This requeue_work may race with concurrent nvme_ns_head_make_request() that do not observe the live path yet. Such concurrent requests may by made by either: - New IO submission. - Requeue_work triggered by nvme_failover_req() or another ana_work. A race may cause requeue_work capture the state of requeue_list before more requests get onto the list. These requests will stay on the list forever unless requeue_work is triggered again. In order to prevent such race, nvme_state_set_live() should synchronize_srcu(&head->srcu) before triggering the requeue_work and prevent nvme_ns_head_make_request referencing an old snapshot of the path list. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Anton Eidelman <anton@lightbitslabs.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit 89eb4d8d ] When building hv_kvp_daemon GCC-8.3 complains: hv_kvp_daemon.c: In function ‘kvp_get_ip_info.constprop’: hv_kvp_daemon.c:812:30: warning: ‘ip_buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized] struct hv_kvp_ipaddr_value *ip_buffer; this seems to be a false positive: we only use ip_buffer when op == KVP_OP_GET_IP_INFO and it is only unset when op == KVP_OP_ENUMERATE. Silence the warning by initializing ip_buffer to NULL. Signed-off-by:
-
Dexuan Cui authored
[ Upstream commit d09bc836 ] Simplify the ring buffer handling with the in-place API. Also avoid the dynamic allocation and the memory leak in the channel callback function. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Kirill A. Shutemov authored
[ Upstream commit 0a46fff2 ] BIOS on Samsung 500C Chromebook reports very rudimentary E820 table that consists of 2 entries: BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] usable BIOS-e820: [mem 0x00000000fffff000-0x00000000ffffffff] reserved It breaks logic in find_trampoline_placement(): bios_start lands on the end of the first 4k page and trampoline start gets placed below 0. Detect underflow and don't touch bios_start for such cases. It makes kernel ignore E820 table on machines that doesn't have two usable pages below BIOS_START_MAX. Fixes: 1b3a6264 ("x86/boot/compressed/64: Validate trampoline placement against E820") Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=203463 Link: https://lkml.kernel.org/r/20190813131654.24378-1-kirill.shutemov@linux.intel.comSigned-off-by:
-
Benjamin Tissoires authored
[ Upstream commit 2d05dba2 ] When calling request_threaded_irq() with a CP2112, the function cp2112_gpio_irq_startup() is called in a IRQ context. Therefore we can not sleep, and we can not call cp2112_gpio_direction_input() there. Move the call to cp2112_gpio_direction_input() earlier to have a working driver. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Andrea Righi authored
[ Upstream commit f1c6ece2 ] lockdep reports the following deadlock scenario: WARNING: possible circular locking dependency detected kworker/1:1/48 is trying to acquire lock: 000000008d7a62b2 (text_mutex){+.+.}, at: kprobe_optimizer+0x163/0x290 but task is already holding lock: 00000000850b5e2d (module_mutex){+.+.}, at: kprobe_optimizer+0x31/0x290 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (module_mutex){+.+.}: __mutex_lock+0xac/0x9f0 mutex_lock_nested+0x1b/0x20 set_all_modules_text_rw+0x22/0x90 ftrace_arch_code_modify_prepare+0x1c/0x20 ftrace_run_update_code+0xe/0x30 ftrace_startup_enable+0x2e/0x50 ftrace_startup+0xa7/0x100 register_ftrace_function+0x27/0x70 arm_kprobe+0xb3/0x130 enable_kprobe+0x83/0xa0 enable_trace_kprobe.part.0+0x2e/0x80 kprobe_register+0x6f/0xc0 perf_trace_event_init+0x16b/0x270 perf_kprobe_init+0xa7/0xe0 perf_kprobe_event_init+0x3e/0x70 perf_try_init_event+0x4a/0x140 perf_event_alloc+0x93a/0xde0 __do_sys_perf_event_open+0x19f/0xf30 __x64_sys_perf_event_open+0x20/0x30 do_syscall_64+0x65/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (text_mutex){+.+.}: __lock_acquire+0xfcb/0x1b60 lock_acquire+0xca/0x1d0 __mutex_lock+0xac/0x9f0 mutex_lock_nested+0x1b/0x20 kprobe_optimizer+0x163/0x290 process_one_work+0x22b/0x560 worker_thread+0x50/0x3c0 kthread+0x112/0x150 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(module_mutex); lock(text_mutex); lock(module_mutex); lock(text_mutex); *** DEADLOCK *** As a reproducer I've been using bcc's funccount.py (https://github.com/iovisor/bcc/blob/master/tools/funccount.py), for example: # ./funccount.py '*interrupt*' That immediately triggers the lockdep splat. Fix by acquiring text_mutex before module_mutex in kprobe_optimizer(). Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: d5b844a2 ("ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()") Link: http://lkml.kernel.org/r/20190812184302.GA7010@xps-13Signed-off-by:
-
Tho Vu authored
[ Upstream commit cfef46d6 ] When a Tx timestamp is requested, a pointer to the skb is stored in the ravb_tstamp_skb struct. This was done without an skb_get. There exists the possibility that the skb could be freed by ravb_tx_free (when ravb_tx_free is called from ravb_start_xmit) before the timestamp was processed, leading to a use-after-free bug. Use skb_get when filling a ravb_tstamp_skb struct, and add appropriate frees/consumes when a ravb_tstamp_skb struct is freed. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Tho Vu <tho.vu.wh@rvc.renesas.com> Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 44ef3a03 ] In i2400m_barker_db_init(), 'options_orig' is allocated through kstrdup() to hold the original command line options. Then, the options are parsed. However, if an error occurs during the parsing process, 'options_orig' is not deallocated, leading to a memory leak bug. To fix this issue, free 'options_orig' before returning the error. Signed-off-by:
-
Stephen Hemminger authored
[ Upstream commit 34343410 ] The driver name gets exposed in sysfs under /sys/bus/pci/drivers so it should look like other devices. Change it to be common format (instead of "Cavium PTP"). This is a trivial fix that was observed by accident because Debian kernels were building this driver into kernel (bug). Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit 80f0fe09 ] There's no need to wait until a completion is received to unmap TX descriptor buffers that have been passed to the hypervisor. Instead unmap it when the hypervisor call has completed. This patch avoids the possibility that a buffer will not be unmapped because a TX completion is lost or mishandled. Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by:
Devesh K. Singh <devesh_singh@in.ibm.com> Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit f1472cb0 ] In kalmia_init_and_get_ethernet_addr(), 'usb_buf' is allocated through kmalloc(). In the following execution, if the 'status' returned by kalmia_send_init_packet() is not 0, 'usb_buf' is not deallocated, leading to memory leaks. To fix this issue, add the 'out' label to free 'usb_buf'. Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 1eca92ee ] In cx82310_bind(), 'dev->partial_data' is allocated through kmalloc(). Then, the execution waits for the firmware to become ready. If the firmware is not ready in time, the execution is terminated. However, the allocated 'dev->partial_data' is not deallocated on this path, leading to a memory leak bug. To fix this issue, free 'dev->partial_data' before returning the error. Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit edc58dd0 ] When dedupe wants to use the page cache to compare parts of two files for dedupe, we must be very careful to handle locking correctly. The current code doesn't do this. It must lock and unlock the page only once if the two pages are the same, since the overlapping range check doesn't catch this when blocksize < pagesize. If the pages are distinct but from the same file, we must observe page locking order and lock them in order of increasing offset to avoid clashing with writeback locking. Fixes: 876bec6f ("vfs: refactor clone/dedupe_file_range common functions") Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Bill O'Donnell <billodo@redhat.com> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit b9cbf8a6 ] In lan78xx_probe(), a new urb is allocated through usb_alloc_urb() and saved to 'dev->urb_intr'. However, in the following execution, if an error occurs, 'dev->urb_intr' is not deallocated, leading to memory leaks. To fix this issue, invoke usb_free_urb() to free the allocated urb before returning from the function. Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 20fb7c7a ] In myri10ge_probe(), myri10ge_alloc_slices() is invoked to allocate slices related structures. Later on, myri10ge_request_irq() is used to get an irq. However, if this process fails, the allocated slices related structures are not deallocated, leading to memory leaks. To fix this issue, revise the target label of the goto statement to 'abort_with_slices'. Signed-off-by:
-
