- 11 Apr, 2024 20 commits
-
-
Michal Luczaj authored
Garbage collector does not take into account the risk of embryo getting enqueued during the garbage collection. If such embryo has a peer that carries SCM_RIGHTS, two consecutive passes of scan_children() may see a different set of children. Leading to an incorrectly elevated inflight count, and then a dangling pointer within the gc_inflight_list. sockets are AF_UNIX/SOCK_STREAM S is an unconnected socket L is a listening in-flight socket bound to addr, not in fdtable V's fd will be passed via sendmsg(), gets inflight count bumped connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc() ---------------- ------------------------- ----------- NS = unix_create1() skb1 = sock_wmalloc(NS) L = unix_find_other(addr) unix_state_lock(L) unix_peer(S) = NS // V count=1 inflight=0 NS = unix_peer(S) skb2 = sock_alloc() skb_queue_tail(NS, skb2[V]) // V became in-flight // V count=2 inflight=1 close(V) // V count=1 inflight=1 // GC candidate condition met for u in gc_inflight_list: if (total_refs == inflight_refs) add u to gc_candidates // gc_candidates={L, V} for u in gc_candidates: scan_children(u, dec_inflight) // embryo (skb1) was not // reachable from L yet, so V's // inflight remains unchanged __skb_queue_tail(L, skb1) unix_state_unlock(L) for u in gc_candidates: if (u.inflight) scan_children(u, inc_inflight_move_tail) // V count=1 inflight=2 (!) If there is a GC-candidate listening socket, lock/unlock its state. This makes GC wait until the end of any ongoing connect() to that socket. After flipping the lock, a possibly SCM-laden embryo is already enqueued. And if there is another embryo coming, it can not possibly carry SCM_RIGHTS. At this point, unix_inflight() can not happen because unix_gc_lock is already taken. Inflight graph remains unaffected. Fixes: 1fd05ba5 ("[AF_UNIX]: Rewrite garbage collector, fixes race.") Signed-off-by:Michal Luczaj <mhal@rbox.co> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240409201047.1032217-1-mhal@rbox.coSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Arınç ÜNAL authored
In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL) of the Open Systems Interconnection basic reference model (OSI/RM) are described; the medium access control (MAC) and logical link control (LLC) sublayers. The MAC sublayer is the one facing the physical layer. In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A Bridge component comprises a MAC Relay Entity for interconnecting the Ports of the Bridge, at least two Ports, and higher layer entities with at least a Spanning Tree Protocol Entity included. Each Bridge Port also functions as an end station and shall provide the MAC Service to an LLC Entity. Each instance of the MAC Service is provided to a distinct LLC Entity that supports protocol identification, multiplexing, and demultiplexing, for protocol data unit (PDU) transmission and reception by one or more higher layer entities. It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC Entity associated with each Bridge Port is modeled as being directly connected to the attached Local Area Network (LAN). On the switch with CPU port architecture, CPU port functions as Management Port, and the Management Port functionality is provided by software which functions as an end station. Software is connected to an IEEE 802 LAN that is wholly contained within the system that incorporates the Bridge. Software provides access to the LLC Entity associated with each Bridge Port by the value of the source port field on the special tag on the frame received by software. We call frames that carry control information to determine the active topology and current extent of each Virtual Local Area Network (VLAN), i.e., spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration Protocol Data Units (MVRPDUs), and frames from other link constrained protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and Link Layer Discovery Protocol (LLDP), link-local frames. They are not forwarded by a Bridge. Permanently configured entries in the filtering database (FDB) ensure that such frames are discarded by the Forwarding Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail: Each of the reserved MAC addresses specified in Table 8-1 (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be permanently configured in the FDB in C-VLAN components and ERs. Each of the reserved MAC addresses specified in Table 8-2 (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently configured in the FDB in S-VLAN components. Each of the reserved MAC addresses specified in Table 8-3 (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in TPMR components. The FDB entries for reserved MAC addresses shall specify filtering for all Bridge Ports and all VIDs. Management shall not provide the capability to modify or remove entries for reserved MAC addresses. The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of propagation of PDUs within a Bridged Network, as follows: The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN) component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward. PDUs transmitted using this destination address, or any other addresses that appear in Table 8-1, Table 8-2, and Table 8-3 (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can therefore travel no further than those stations that can be reached via a single individual LAN from the originating station. The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an address that no conformant S-VLAN component, C-VLAN component, or MAC Bridge can forward; however, this address is relayed by a TPMR component. PDUs using this destination address, or any of the other addresses that appear in both Table 8-1 and Table 8-2 but not in Table 8-3 (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by any TPMRs but will propagate no further than the nearest S-VLAN component, C-VLAN component, or MAC Bridge. The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address that no conformant C-VLAN component, MAC Bridge can forward; however, it is relayed by TPMR components and S-VLAN components. PDUs using this destination address, or any of the other addresses that appear in Table 8-1 but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]), will be relayed by TPMR components and S-VLAN components but will propagate no further than the nearest C-VLAN component or MAC Bridge. Because the LLC Entity associated with each Bridge Port is provided via CPU port, we must not filter these frames but forward them to CPU port. In a Bridge, the transmission Port is majorly decided by ingress and egress rules, FDB, and spanning tree Port State functions of the Forwarding Process. For link-local frames, only CPU port should be designated as destination port in the FDB, and the other functions of the Forwarding Process must not interfere with the decision of the transmission Port. We call this process trapping frames to CPU port. Therefore, on the switch with CPU port architecture, link-local frames must be trapped to CPU port, and certain link-local frames received by a Port of a Bridge comprising a TPMR component or an S-VLAN component must be excluded from it. A Bridge of the switch with CPU port architecture cannot comprise a Two-Port MAC Relay (TPMR) component as a TPMR component supports only a subset of the functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port doesn't count) of this architecture will either function as a standard MAC Bridge or a standard VLAN Bridge. Therefore, a Bridge of this architecture can only comprise S-VLAN components, C-VLAN components, or MAC Bridge components. Since there's no TPMR component, we don't need to relay PDUs using the destination addresses specified on the Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge section where they must be relayed by TPMR components. One option to trap link-local frames to CPU port is to add static FDB entries with CPU port designated as destination port. However, because that Independent VLAN Learning (IVL) is being used on every VID, each entry only applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC Bridge component or a C-VLAN component, there would have to be 16 times 4096 entries. This switch intellectual property can only hold a maximum of 2048 entries. Using this option, there also isn't a mechanism to prevent link-local frames from being discarded when the spanning tree Port State of the reception Port is discarding. The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4 registers. Whilst this applies to every VID, it doesn't contain all of the reserved MAC addresses without affecting the remaining Standard Group MAC Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF destination addresses which may be relayed by MAC Bridges or VLAN Bridges. The latter option provides better but not complete conformance. This switch intellectual property also does not provide a mechanism to trap link-local frames with specific destination addresses to CPU port by Bridge, to conform to the filtering rules for the distinct Bridge components. Therefore, regardless of the type of the Bridge component, link-local frames with these destination addresses will be trapped to CPU port: 01-80-C2-00-00-[00,01,02,03,0E] In a Bridge comprising a MAC Bridge component or a C-VLAN component: Link-local frames with these destination addresses won't be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] In a Bridge comprising an S-VLAN component: Link-local frames with these destination addresses will be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-00 Link-local frames with these destination addresses won't be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-[04,05,06,07,08,09,0A] Currently on this switch intellectual property, if the spanning tree Port State of the reception Port is discarding, link-local frames will be discarded. To trap link-local frames regardless of the spanning tree Port State, make the switch regard them as Bridge Protocol Data Units (BPDUs). This switch intellectual property only lets the frames regarded as BPDUs bypass the spanning tree Port State function of the Forwarding Process. With this change, the only remaining interference is the ingress rules. When the reception Port has no PVID assigned on software, VLAN-untagged frames won't be allowed in. There doesn't seem to be a mechanism on the switch intellectual property to have link-local frames bypass this function of the Forwarding Process. Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Reviewed-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20240409-b4-for-net-mt7530-fix-link-local-when-stp-discarding-v2-1-07b1150164ac@arinc9.comSigned-off-by:
-
Gerd Bayer authored
This reverts commit 58effa34. Review was not finished on this patch. So it's not ready for upstreaming. Signed-off-by:
Gerd Bayer <gbayer@linux.ibm.com> Link: https://lore.kernel.org/r/20240409113753.2181368-1-gbayer@linux.ibm.com Fixes: 58effa34 ("s390/ism: fix receive message buffer allocation") Signed-off-by:
-
Daniel Machon authored
The wrong port config is being used if the PCS is reconfigured. Fix this by correctly using the new config instead of the old one. Fixes: 946e7fd5 ("net: sparx5: add port module support") Signed-off-by:
Daniel Machon <daniel.machon@microchip.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240409-link-mode-reconfiguration-fix-v2-1-db6a507f3627@microchip.comSigned-off-by:
-
Arnd Bergmann authored
A couple of debug functions use a 512 byte temporary buffer and call another function that has another buffer of the same size, which in turn exceeds the usual warning limit for excessive stack usage: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:1073:1: error: stack frame size (1448) exceeds limit (1024) in 'dr_dump_start' [-Werror,-Wframe-larger-than] dr_dump_start(struct seq_file *file, loff_t *pos) drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:1009:1: error: stack frame size (1120) exceeds limit (1024) in 'dr_dump_domain' [-Werror,-Wframe-larger-than] dr_dump_domain(struct seq_file *file, struct mlx5dr_domain *dmn) drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:705:1: error: stack frame size (1104) exceeds limit (1024) in 'dr_dump_matcher_rx_tx' [-Werror,-Wframe-larger-than] dr_dump_matcher_rx_tx(struct seq_file *file, bool is_rx, Rework these so that each of the various code paths only ever has one of these buffers in it, and exactly the functions that declare one have the 'noinline_for_stack' annotation that prevents them from all being inlined into the same caller. Fixes: 917d1e79 ("net/mlx5: DR, Change SWS usage to debug fs seq_file interface") Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/all/20240219100506.648089-1-arnd@kernel.org/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240408074142.3007036-1-arnd@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Tariq Toukan says: ==================== mlx5 misc fixes This patchset provides bug fixes to mlx5 driver. This is V2 of the series previously submitted as PR by Saeed: https://lore.kernel.org/netdev/20240326144646.2078893-1-saeed@kernel.org/T/ Series generated against: commit 237f3cf1 ("xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING") ==================== Link: https://lore.kernel.org/r/20240409190820.227554-1-tariqt@nvidia.comSigned-off-by:
-
Tariq Toukan authored
Adaptations need to be made for the auxiliary device management in the core driver level. Block this combination for now. Fixes: 678eb448 ("net/mlx5: SD, Implement basic query and instantiation") Signed-off-by:
Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by:
Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-12-tariqt@nvidia.comSigned-off-by:
-
Carolina Jubran authored
When supporting more than 128 channels, the RQT size is calculated by multiplying the number of channels by 2 and rounding up to the nearest power of 2. The index of the RQT is derived from the RSS hash calculations. If XOR8 is used as the RSS hash function, there are only 256 possible hash results, and therefore, only 256 indexes can be reached in the RQT. Block setting the RSS hash function to XOR when the number of channels exceeds 128. Fixes: 74a8dada ("net/mlx5e: Preparations for supporting larger number of channels") Signed-off-by:
Carolina Jubran <cjubran@nvidia.com> Signed-off-by:
-
Rahul Rameshbabu authored
Free Tx port timestamping metadata entries in the NAPI poll context and consume metadata enties in the WQE xmit path. Do not free a Tx port timestamping metadata entry in the WQE xmit path even in the error path to avoid a race between two metadata entry producers. Fixes: 3178308a ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs") Signed-off-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Carolina Jubran authored
When creating a new HTB class while the interface is down, the variable that follows the number of QoS SQs (htb_max_qos_sqs) may not be consistent with the number of HTB classes. Previously, we compared these two values to ensure that the node_qid is lower than the number of QoS SQs, and we allocated stats for that SQ when they are equal. Change the check to compare the node_qid with the current number of leaf nodes and fix the checking conditions to ensure allocation of stats_list and stats for each node. Fixes: 214baf22 ("net/mlx5e: Support HTB offload") Signed-off-by:
-
Carolina Jubran authored
When mlx5e_priv_init() fails, the cleanup flow calls mlx5e_selq_cleanup which calls mlx5e_selq_apply() that assures that the `priv->state_lock` is held using lockdep_is_held(). Acquire the state_lock in mlx5e_selq_cleanup(). Kernel log: ============================= WARNING: suspicious RCU usage 6.8.0-rc3_net_next_841a9b5 #1 Not tainted ----------------------------- drivers/net/ethernet/mellanox/mlx5/core/en/selq.c:124 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by systemd-modules/293: #0: ffffffffa05067b0 (devices_rwsem){++++}-{3:3}, at: ib_register_client+0x109/0x1b0 [ib_core] #1: ffff8881096c65c0 (&device->client_data_rwsem){++++}-{3:3}, at: add_client_context+0x104/0x1c0 [ib_core] stack backtrace: CPU: 4 PID: 293 Comm: systemd-modules Not tainted 6.8.0-rc3_net_next_841a9b5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x8a/0xa0 lockdep_rcu_suspicious+0x154/0x1a0 mlx5e_selq_apply+0x94/0xa0 [mlx5_core] mlx5e_selq_cleanup+0x3a/0x60 [mlx5_core] mlx5e_priv_init+0x2be/0x2f0 [mlx5_core] mlx5_rdma_setup_rn+0x7c/0x1a0 [mlx5_core] rdma_init_netdev+0x4e/0x80 [ib_core] ? mlx5_rdma_netdev_free+0x70/0x70 [mlx5_core] ipoib_intf_init+0x64/0x550 [ib_ipoib] ipoib_intf_alloc+0x4e/0xc0 [ib_ipoib] ipoib_add_one+0xb0/0x360 [ib_ipoib] add_client_context+0x112/0x1c0 [ib_core] ib_register_client+0x166/0x1b0 [ib_core] ? 0xffffffffa0573000 ipoib_init_module+0xeb/0x1a0 [ib_ipoib] do_one_initcall+0x61/0x250 do_init_module+0x8a/0x270 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x17d/0x230 __x64_sys_finit_module+0x61/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK> Fixes: 8bf30be7 ("net/mlx5e: Introduce select queue parameters") Signed-off-by: -
Carolina Jubran authored
Changing the channels number after configuring the receive flow hash indirection table may affect the RSS table size. The previous configuration may no longer be compatible with the new receive flow hash indirection table. Block changing the channels number when RXFH is configured and changing the channels number requires resizing the RSS table size. Fixes: 74a8dada ("net/mlx5e: Preparations for supporting larger number of channels") Signed-off-by:
-
Cosmin Ratiu authored
struct mlx5_pkt_reformat contains a naked union of a u32 id and a dr_action pointer which is used when the action is SW-managed (when pkt_reformat.owner is set to MLX5_FLOW_RESOURCE_OWNER_SW). Using id directly in that case is incorrect, as it maps to the least significant 32 bits of the 64-bit pointer in mlx5_fs_dr_action and not to the pkt reformat id allocated in firmware. For the purpose of comparing whether two rules are identical, interpreting the least significant 32 bits of the mlx5_fs_dr_action pointer as an id mostly works... until it breaks horribly and produces the outcome described in [1]. This patch fixes mlx5_flow_dests_cmp to correctly compare ids using mlx5_fs_dr_action_get_pkt_reformat_id for the SW-managed rules. Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Fixes: 6a48faee ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by:
Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Reviewed-by:
-
Cosmin Ratiu authored
Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a subsequent step during the same handle creation references it again, resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL. This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1]. This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle. Fixes: 74491de9 ("net/mlx5: Add multi dest support") Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Signed-off-by:
-
Michael Liang authored
The mlx5 comp irq name scheme is changed a little bit between commit 3663ad34 ("net/mlx5: Shift control IRQ to the last index") and commit 3354822c ("net/mlx5: Use dynamic msix vectors allocation"). The index in the comp irq name used to start from 0 but now it starts from 1. There is nothing critical here, but it's harmless to change back to the old behavior, a.k.a starting from 0. Fixes: 3354822c ("net/mlx5: Use dynamic msix vectors allocation") Reviewed-by:
Mohamed Khalfella <mkhalfella@purestorage.com> Reviewed-by:
Yuanyuan Zhong <yzhong@purestorage.com> Signed-off-by:
Michael Liang <mliang@purestorage.com> Reviewed-by:
Shay Drory <shayd@nvidia.com> Signed-off-by:
-
Shay Drory authored
In case device is having a non fatal FW error during probe, the driver will report the error to user via devlink. This will trigger a WARN_ON, since mlx5 is calling devlink_register() last. In order to avoid the WARN_ON[1], change mlx5 to invoke devl_register() first under devlink lock. [1] WARNING: CPU: 5 PID: 227 at net/devlink/health.c:483 devlink_recover_notify.constprop.0+0xb8/0xc0 CPU: 5 PID: 227 Comm: kworker/u16:3 Not tainted 6.4.0-rc5_for_upstream_min_debug_2023_06_12_12_38 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_reporter_err_work [mlx5_core] RIP: 0010:devlink_recover_notify.constprop.0+0xb8/0xc0 Call Trace: <TASK> ? __warn+0x79/0x120 ? devlink_recover_notify.constprop.0+0xb8/0xc0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_recover_notify.constprop.0+0xb8/0xc0 devlink_health_report+0x4a/0x1c0 mlx5_fw_reporter_err_work+0xa4/0xd0 [mlx5_core] process_one_work+0x1bb/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x4d/0x3c0 ? process_one_work+0x3c0/0x3c0 kthread+0xc6/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: cf530217 ("devlink: Notify users when objects are accessible") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Shay Drory authored
Next patch will move devlink register to be first. Therefore, whenever mlx5 will register a param, the user will be notified. In order to notify the user, devlink is using the get() callback of the param. Hence, resources that are being used by the get() callback must be set before the devlink param is registered. Therefore, store eswitch pointer inside mdev before registering the param. Signed-off-by:
-
Eric Dumazet authored
In my recent commit, I missed that do_replace() handlers use copy_from_sockptr() (which I fixed), followed by unsafe copy_from_sockptr_offset() calls. In all functions, we can perform the @optlen validation before even calling xt_alloc_table_info() with the following check: if ((u64)optlen < (u64)tmp.size + sizeof(tmp)) return -EINVAL; Fixes: 0c83842d ("netfilter: validate user input for expected length") Reported-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Pablo Neira Ayuso <pablo@netfilter.org> Link: https://lore.kernel.org/r/20240409120741.3538135-1-edumazet@google.comSigned-off-by:
-
Heiner Kallweit authored
Add missing dependency on CONFIG_R8169_LEDS. As-is a link error occurs if config option CONFIG_R8169_LEDS isn't enabled. Fixes: 19fa4f2a ("r8169: fix LED-related deadlock on module removal") Reported-by:
Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Tested-By:
-
Arınç ÜNAL authored
The commit 40b5d2f1 ("net: dsa: mt7530: Add support for EEE features") brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board (bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to SkyLake Huang (黃啟澤) from MediaTek for providing information on the internal EEE switch bit. There are existing boards that were not designed to pull the pin low. Because of that, the EEE status currently depends on the board design. The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually used to control an LED. Once the bit is unset, the pin will be low. That will make the active low LED turn on. The pin is controlled by the switch PHY. It seems that the PHY controls the pin in the way that it inverts the pin state. That means depending on the wiring of the LED connected to LAN2LED0 on the board, the LED may be on without an active link. To not cause this unwanted behaviour whilst enabling EEE on all boards, set the internal EEE switch bit on the CORE_PLL_GROUP4 register. My testing on MT7531 shows a certain amount of traffic loss when EEE is enabled. That said, I haven't come across a board that enables EEE. So enable EEE on the switch MACs but disable EEE advertisement on the switch PHYs. This way, we don't change the behaviour of the majority of the boards that have this switch. The mediatek-ge PHY driver already disables EEE advertisement on the switch PHYs but my testing shows that it is somehow enabled afterwards. Disabling EEE advertisement before the PHY driver initialises keeps it off. With this change, EEE can now be enabled using ethtool. Fixes: 40b5d2f1 ("net: dsa: mt7530: Add support for EEE features") Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
- 10 Apr, 2024 7 commits
-
-
Heiner Kallweit authored
Binding devm_led_classdev_register() to the netdev is problematic because on module removal we get a RTNL-related deadlock. Fix this by avoiding the device-managed LED functions. Note: We can safely call led_classdev_unregister() for a LED even if registering it failed, because led_classdev_unregister() detects this and is a no-op in this case. Fixes: 18764b88 ("r8169: add support for LED's on RTL8168/RTL8101") Cc: stable@vger.kernel.org Reported-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Brett Creeley authored
When the driver notices fw_status == 0xff it tries to perform a PCI reset on itself via pci_reset_function() in the context of the driver's health thread. However, pdsc_reset_prepare calls pdsc_stop_health_thread(), which attempts to stop/flush the health thread. This results in a deadlock because the stop/flush will never complete since the driver called pci_reset_function() from the health thread context. Fix by changing the pdsc_check_pci_health_function() to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's work queue. Unloading the driver in the fw_down/dead state uncovered another issue, which can be seen in the following trace: WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440 [...] RIP: 0010:__queue_work+0x358/0x440 [...] Call Trace: <TASK> ? __warn+0x85/0x140 ? __queue_work+0x358/0x440 ? report_bug+0xfc/0x1e0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __queue_work+0x358/0x440 queue_work_on+0x28/0x30 pdsc_devcmd_locked+0x96/0xe0 [pds_core] pdsc_devcmd_reset+0x71/0xb0 [pds_core] pdsc_teardown+0x51/0xe0 [pds_core] pdsc_remove+0x106/0x200 [pds_core] pci_device_remove+0x37/0xc0 device_release_driver_internal+0xae/0x140 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xa0 pdsc_cleanup_module+0x10/0x780 [pds_core] __x64_sys_delete_module+0x142/0x2b0 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fbd9d03a14b [...] Fix this by preventing the devcmd reset if the FW is not running. Fixes: d9407ff1 ("pds_core: Prevent health thread from running during reset/remove") Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Signed-off-by:
Brett Creeley <brett.creeley@amd.com> Reviewed-by:
-
Jiri Benc authored
Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it still means hlist_for_each_entry_rcu can return an item that got removed from the list. The memory itself of such item is not freed thanks to RCU but nothing guarantees the actual content of the memory is sane. In particular, the reference count can be zero. This can happen if ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough timing, this can happen: 1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry. 2. Then, the whole ipv6_del_addr is executed for the given entry. The reference count drops to zero and kfree_rcu is scheduled. 3. ipv6_get_ifaddr continues and tries to increments the reference count (in6_ifa_hold). 4. The rcu is unlocked and the entry is freed. 5. The freed entry is returned. Prevent increasing of the reference count in such case. The name in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe. [ 41.506330] refcount_t: addition on 0; use-after-free. [ 41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130 [ 41.507413] Modules linked in: veth bridge stp llc [ 41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be8 #14 [ 41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [ 41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130 [ 41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 <0f> 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff [ 41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282 [ 41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000 [ 41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900 [ 41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff [ 41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000 [ 41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48 [ 41.514086] FS: 00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000 [ 41.514726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0 [ 41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.516799] Call Trace: [ 41.517037] <TASK> [ 41.517249] ? __warn+0x7b/0x120 [ 41.517535] ? refcount_warn_saturate+0xa5/0x130 [ 41.517923] ? report_bug+0x164/0x190 [ 41.518240] ? handle_bug+0x3d/0x70 [ 41.518541] ? exc_invalid_op+0x17/0x70 [ 41.520972] ? asm_exc_invalid_op+0x1a/0x20 [ 41.521325] ? refcount_warn_saturate+0xa5/0x130 [ 41.521708] ipv6_get_ifaddr+0xda/0xe0 [ 41.522035] inet6_rtm_getaddr+0x342/0x3f0 [ 41.522376] ? __pfx_inet6_rtm_getaddr+0x10/0x10 [ 41.522758] rtnetlink_rcv_msg+0x334/0x3d0 [ 41.523102] ? netlink_unicast+0x30f/0x390 [ 41.523445] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 41.523832] netlink_rcv_skb+0x53/0x100 [ 41.524157] netlink_unicast+0x23b/0x390 [ 41.524484] netlink_sendmsg+0x1f2/0x440 [ 41.524826] __sys_sendto+0x1d8/0x1f0 [ 41.525145] __x64_sys_sendto+0x1f/0x30 [ 41.525467] do_syscall_64+0xa5/0x1b0 [ 41.525794] entry_SYSCALL_64_after_hwframe+0x72/0x7a [ 41.526213] RIP: 0033:0x7fbc4cfcea9a [ 41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 41.527942] RSP: 002b:00007ffcf54012a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 41.528593] RAX: ffffffffffffffda RBX: 00007ffcf5401368 RCX: 00007fbc4cfcea9a [ 41.529173] RDX: 000000000000002c RSI: 00007fbc4b9d9bd0 RDI: 0000000000000005 [ 41.529786] RBP: 00007fbc4bafb040 R08: 00007ffcf54013e0 R09: 000000000000000c [ 41.530375] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 41.530977] R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007fbc4ca85d1b [ 41.531573] </TASK> Fixes: 5c578aed ("IPv6: convert addrconf hash list to RCU") Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Link: https://lore.kernel.org/r/8ab821e36073a4a406c50ec83c9e8dc586c539e4.1712585809.git.jbenc@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: start to replace copy_from_sockptr() We got several syzbot reports about unsafe copy_from_sockptr() calls. After fixing some of them, it appears that we could use a new helper to factorize all the checks in one place. This series targets net tree, we can later start converting many call sites in net-next. ==================== Link: https://lore.kernel.org/r/20240408082845.3957374-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
syzbot reported unsafe calls to copy_from_sockptr() [1] Use copy_safe_from_sockptr() instead. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 Read of size 4 at addr ffff88801caa1ec3 by task syz-executor459/5078 CPU: 0 PID: 5078 Comm: syz-executor459 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 do_sock_setsockopt+0x3b1/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfd/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7f7fac07fd89 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff660eb788 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f7fac07fd89 RDX: 0000000000000000 RSI: 0000000000000118 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000020000a80 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240408082845.3957374-4-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
syzbot reports one unsafe call to copy_from_sockptr() [1] Use copy_safe_from_sockptr() instead. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417 Read of size 4 at addr ffff0000c6d54083 by task syz-executor406/6167 CPU: 1 PID: 6167 Comm: syz-executor406 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load_n_noabort+0x1c/0x28 mm/kasan/report_generic.c:391 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417 do_sock_setsockopt+0x2a0/0x4e0 net/socket.c:2311 __sys_setsockopt+0x128/0x1a8 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __arm64_sys_setsockopt+0xb8/0xd4 net/socket.c:2340 __invoke_syscall arch/arm64/kernel/syscall.c:34 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:48 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:133 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:152 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Fixes: 1b2b03f8 ("Add mISDN core files") Signed-off-by:
-
Eric Dumazet authored
copy_from_sockptr() helper is unsafe, unless callers did the prior check against user provided optlen. Too many callers get this wrong, lets add a helper to fix them and avoid future copy/paste bugs. Instead of : if (optlen < sizeof(opt)) { err = -EINVAL; break; } if (copy_from_sockptr(&opt, optval, sizeof(opt)) { err = -EFAULT; break; } Use : err = copy_safe_from_sockptr(&opt, sizeof(opt), optval, optlen); if (err) break; Signed-off-by:
-
- 09 Apr, 2024 6 commits
-
-
Arnd Bergmann authored
The log_martians variable is only used in an #ifdef, causing a 'make W=1' warning with gcc: net/ipv4/route.c: In function 'ip_rt_send_redirect': net/ipv4/route.c:880:13: error: variable 'log_martians' set but not used [-Werror=unused-but-set-variable] Change the #ifdef to an equivalent IS_ENABLED() to let the compiler see where the variable is used. Fixes: 30038fc6 ("net: ip_rt_send_redirect() optimization") Reviewed-by:
-
Arnd Bergmann authored
When CONFIG_IPV6_SUBTREES is disabled, the only user is hidden, causing a 'make W=1' warning: net/ipv6/ip6_fib.c: In function 'fib6_add': net/ipv6/ip6_fib.c:1388:32: error: variable 'pn' set but not used [-Werror=unused-but-set-variable] Add another #ifdef around the variable declaration, matching the other uses in this file. Fixes: 66729e18 ("[IPV6] ROUTE: Make sure we have fn->leaf when adding a node on subtree.") Link: https://lore.kernel.org/netdev/20240322131746.904943-1-arnd@kernel.org/Reviewed-by:
-
Geetha sowjanya authored
NIX SQ mode and link backpressure configuration is required for all platforms. But in current driver this code is wrongly placed under specific platform check. This patch fixes the issue by moving the code out of platform check. Fixes: 5d9b976d ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Link: https://lore.kernel.org/r/20240408063643.26288-1-gakula@marvell.comSigned-off-by:
-
Kuniyuki Iwashima authored
syzkaller started to report deadlock of unix_gc_lock after commit 4090fa37 ("af_unix: Replace garbage collection algorithm."), but it just uncovers the bug that has been there since commit 314001f0 ("af_unix: Add OOB support"). The repro basically does the following. from socket import * from array import array c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) c1.sendmsg([b'a'], [(SOL_SOCKET, SCM_RIGHTS, array("i", [c2.fileno()]))], MSG_OOB) c2.recv(1) # blocked as no normal data in recv queue c2.close() # done async and unblock recv() c1.close() # done async and trigger GC A socket sends its file descriptor to itself as OOB data and tries to receive normal data, but finally recv() fails due to async close(). The problem here is wrong handling of OOB skb in manage_oob(). When recvmsg() is called without MSG_OOB, manage_oob() is called to check if the peeked skb is OOB skb. In such a case, manage_oob() pops it out of the receive queue but does not clear unix_sock(sk)->oob_skb. This is wrong in terms of uAPI. Let's say we send "hello" with MSG_OOB, and "world" without MSG_OOB. The 'o' is handled as OOB data. When recv() is called twice without MSG_OOB, the OOB data should be lost. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM, 0) >>> c1.send(b'hello', MSG_OOB) # 'o' is OOB data 5 >>> c1.send(b'world') 5 >>> c2.recv(5) # OOB data is not received b'hell' >>> c2.recv(5) # OOB date is skipped b'world' >>> c2.recv(5, MSG_OOB) # This should return an error b'o' In the same situation, TCP actually returns -EINVAL for the last recv(). Also, if we do not clear unix_sk(sk)->oob_skb, unix_poll() always set EPOLLPRI even though the data has passed through by previous recv(). To avoid these issues, we must clear unix_sk(sk)->oob_skb when dequeuing it from recv queue. The reason why the old GC did not trigger the deadlock is because the old GC relied on the receive queue to detect the loop. When it is triggered, the socket with OOB data is marked as GC candidate because file refcount == inflight count (1). However, after traversing all inflight sockets, the socket still has a positive inflight count (1), thus the socket is excluded from candidates. Then, the old GC lose the chance to garbage-collect the socket. With the old GC, the repro continues to create true garbage that will never be freed nor detected by kmemleak as it's linked to the global inflight list. That's why we couldn't even notice the issue. Fixes: 314001f0 ("af_unix: Add OOB support") Reported-by: syzbot+7f7f201cc2668a8fd169@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7f7f201cc2668a8fd169Signed-off-by:
-
Marek Vasut authored
The ks8851_irq() thread may call ks8851_rx_pkts() in case there are any packets in the MAC FIFO, which calls netif_rx(). This netif_rx() implementation is guarded by local_bh_disable() and local_bh_enable(). The local_bh_enable() may call do_softirq() to run softirqs in case any are pending. One of the softirqs is net_rx_action, which ultimately reaches the driver .start_xmit callback. If that happens, the system hangs. The entire call chain is below: ks8851_start_xmit_par from netdev_start_xmit netdev_start_xmit from dev_hard_start_xmit dev_hard_start_xmit from sch_direct_xmit sch_direct_xmit from __dev_queue_xmit __dev_queue_xmit from __neigh_update __neigh_update from neigh_update neigh_update from arp_process.constprop.0 arp_process.constprop.0 from __netif_receive_skb_one_core __netif_receive_skb_one_core from process_backlog process_backlog from __napi_poll.constprop.0 __napi_poll.constprop.0 from net_rx_action net_rx_action from __do_softirq __do_softirq from call_with_stack call_with_stack from do_softirq do_softirq from __local_bh_enable_ip __local_bh_enable_ip from netif_rx netif_rx from ks8851_irq ks8851_irq from irq_thread_fn irq_thread_fn from irq_thread irq_thread from kthread kthread from ret_from_fork The hang happens because ks8851_irq() first locks a spinlock in ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...) and with that spinlock locked, calls netif_rx(). Once the execution reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again which attempts to claim the already locked spinlock again, and the hang happens. Move the do_softirq() call outside of the spinlock protected section of ks8851_irq() by disabling BHs around the entire spinlock protected section of ks8851_irq() handler. Place local_bh_enable() outside of the spinlock protected section, so that it can trigger do_softirq() without the ks8851_par.c ks8851_lock_par() spinlock being held, and safely call ks8851_start_xmit_par() without attempting to lock the already locked spinlock. Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable() now, replace netif_rx() with __netif_rx() which is not duplicating the local_bh_disable()/local_bh_enable() calls. Fixes: 797047f8 ("net: ks8851: Implement Parallel bus operations") Signed-off-by:
Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20240405203204.82062-2-marex@denx.deSigned-off-by:
-
Marek Vasut authored
Both ks8851_rx_skb_par() and ks8851_rx_skb_spi() call netif_rx(skb), inline the netif_rx(skb) call directly into ks8851_common.c and drop the .rx_skb callback and ks8851_rx_skb() wrapper. This removes one indirect call from the driver, no functional change otherwise. Signed-off-by:
-
- 08 Apr, 2024 7 commits
-
-
David S. Miller authored
Minda Chen says: ==================== Add missing mmc statistics in DW GMAC Add miss MMC statistic in DW GMAC base on 6.9-rc1 changed v2: patch2 : remove mmc_rx_control_g due to it is gotten in ethtool_ops::get_eth_ctrl_stats. ==================== Signed-off-by: -
Minda Chen authored
The missing statistics including Rx_Receive_Error_Packets and Tx_OSize_Packets_Good. Signed-off-by:
Minda Chen <minda.chen@starfivetech.com> Reviewed-by:
-
Minda Chen authored
XGMAC MMC has already added LPI statistics. GMAC MMC lack of these statistics. Add register definition and reading the LPI statistics from registers. Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes The first 2 patches fix 2 potential issues in the aux bus initialization and error recovery paths. The 3rd patch fixes a potential PTP TX timestamp issue during error recovery. ==================== Signed-off-by: -
Pavan Chebbi authored
It is possible that during error recovery and firmware reset, there is a pending TX PTP packet waiting for the timestamp. We need to reset this condition so that after recovery, the tx_avail count for PTP is reset back to the initial value. Otherwise, we may not accept any PTP TX timestamps after recovery. Fixes: 118612d5 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods") Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vikas Gupta authored
Since runtime MSIXs vector allocation/free has been removed, the L2 driver needs to repopulate the MSIX entries for the ulp client as the irq table may change during the recovery process. Fixes: 30343221 ("bnxt_en: Remove runtime interrupt vector allocation") Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
-
Vikas Gupta authored
If ulp = kzalloc() fails, the allocated edev will leak because it is not properly assigned and the cleanup path will not be able to free it. Fix it by assigning it properly immediately after allocation. Fixes: 30343221 ("bnxt_en: Remove runtime interrupt vector allocation") Reviewed-by:
-
