If the device is plugged/unplugged without giving time for mcp_init_work()
to complete, we might kick in the devm free code path and thus have
unavailable struct mcp_2221 while in delayed work.

Canceling the delayed_work item is enough to solve the issue, because
cancel_delayed_work_sync will prevent the work item to requeue itself.

Fixes: 960f9df7 ("HID: mcp2221: add ADC/DAC support via iio subsystem")
CC: stable@vger.kernel.org
Acked-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/20230215-wip-mcp2221-v2-1-109f71fd036e@redhat.comSigned-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Pull HID fixes from Benjamin Tissoires:

 - fix potential infinite loop with a badly crafted HID device (Xin
   Zhao)

 - fix regression from 6.1 in USB logitech devices potentially making
   their mouse wheel not working (Bastien Nocera)

 - clean up in AMD sensors, which fixes a long time resume bug (Mario
   Limonciello)

 - few device small fixes and quirks

* tag 'for-linus-2023020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreen 29DF on HP
  HID: amd_sfh: if no sensors are enabled, clean up
  HID: logitech: Disable hi-res scrolling on USB
  HID: core: Fix deadloop in hid_apply_multiplier.
  HID: Ignore battery for Elan touchscreen on Asus TP420IA
  HID: elecom: add support for TrackBall 056E:011C

Pull cifx fix from Steve French:
 "Small fix for use after free"

* tag '6.2-rc8-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix use-after-free in rdata->read_into_pages()

Pull devicetree fixes from Rob Herring:

 - Fix handling of multiple OF framebuffer devices

 - Fix booting on Socionext Synquacer with bad 'dma-ranges' entries

 - Add DT binding .yamllint to .gitignore

* tag 'devicetree-fixes-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: interrupt-controller: arm,gic-v3: Fix typo in description of msi-controller property
  dt-bindings: Fix .gitignore
  of/address: Return an error when no valid dma-ranges are found
  of: Make OF framebuffer device names unique

Pull tracing fix from Steven Rostedt:
 "Fix regression in poll() and select()

  With the fix that made poll() and select() block if read would block
  caused a slight regression in rasdaemon, as it needed that kind of
  behavior. Add a way to make that behavior come back by writing zero
  into the 'buffer_percentage', which means to never block on read"

* tag 'trace-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw

When the network status is unstable, use-after-free may occur when
read data from the server.

  BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0

  Call Trace:
   <TASK>
   dump_stack_lvl+0x38/0x4c
   print_report+0x16f/0x4a6
   kasan_report+0xb7/0x130
   readpages_fill_pages+0x14c/0x7e0
   cifs_readv_receive+0x46d/0xa40
   cifs_demultiplex_thread+0x121c/0x1490
   kthread+0x16b/0x1a0
   ret_from_fork+0x2c/0x50
   </TASK>

  Allocated by task 2535:
   kasan_save_stack+0x22/0x50
   kasan_set_track+0x25/0x30
   __kasan_kmalloc+0x82/0x90
   cifs_readdata_direct_alloc+0x2c/0x110
   cifs_readdata_alloc+0x2d/0x60
   cifs_readahead+0x393/0xfe0
   read_pages+0x12f/0x470
   page_cache_ra_unbounded+0x1b1/0x240
   filemap_get_pages+0x1c8/0x9a0
   filemap_read+0x1c0/0x540
   cifs_strict_readv+0x21b/0x240
   vfs_read+0x395/0x4b0
   ksys_read+0xb8/0x150
   do_syscall_64+0x3f/0x90
   entry_SYSCALL_64_after_hwframe+0x72/0xdc

  Freed by task 79:
   kasan_save_stack+0x22/0x50
   kasan_set_track+0x25/0x30
   kasan_save_free_info+0x2e/0x50
   __kasan_slab_free+0x10e/0x1a0
   __kmem_cache_free+0x7a/0x1a0
   cifs_readdata_release+0x49/0x60
   process_one_work+0x46c/0x760
   worker_thread+0x2a4/0x6f0
   kthread+0x16b/0x1a0
   ret_from_fork+0x2c/0x50

  Last potentially related work creation:
   kasan_save_stack+0x22/0x50
   __kasan_record_aux_stack+0x95/0xb0
   insert_work+0x2b/0x130
   __queue_work+0x1fe/0x660
   queue_work_on+0x4b/0x60
   smb2_readv_callback+0x396/0x800
   cifs_abort_connection+0x474/0x6a0
   cifs_reconnect+0x5cb/0xa50
   cifs_readv_from_socket.cold+0x22/0x6c
   cifs_read_page_from_socket+0xc1/0x100
   readpages_fill_pages.cold+0x2f/0x46
   cifs_readv_receive+0x46d/0xa40
   cifs_demultiplex_thread+0x121c/0x1490
   kthread+0x16b/0x1a0
   ret_from_fork+0x2c/0x50

The following function calls will cause UAF of the rdata pointer.

readpages_fill_pages
 cifs_read_page_from_socket
  cifs_readv_from_socket
   cifs_reconnect
    __cifs_reconnect
     cifs_abort_connection
      mid->callback() --> smb2_readv_callback
       queue_work(&rdata->work)  # if the worker completes first,
                                 # the rdata is freed
          cifs_readv_complete
            kref_put
              cifs_readdata_release
                kfree(rdata)
 return rdata->...               # UAF in readpages_fill_pages()

Similarly, this problem also occurs in the uncache_fill_pages().

Fix this by adjusts the order of condition judgment in the return
statement.
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull cgroup fixes from Tejun Heo:
 "During the v6.2 cycle, there were a series of changes to task cpu
  affinity handling which fixed cpuset inadvertently clobbering
  user-configured affinity masks. Unfortunately, they broke the affinity
  handling on hybrid heterogeneous CPUs which have cores that can
  execute both 64 and 32bit along with cores that can only execute 32bit
  code.

  This contains two fix patches for the above issue. While reverting the
  changes that caused the regression is definitely an option, the
  origial patches do improve how cpuset behave signficantly in some
  cases and the fixes seem fairly safe, so I think it'd be better to try
  to fix them first"

* tag 'cgroup-for-6.2-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: Call set_cpus_allowed_ptr() with appropriate mask for task
  cgroup/cpuset: Don't filter offline CPUs in cpuset_cpus_allowed() for top cpuset tasks

Pull btrfs fixes from David Sterba:

 - explicitly initialize zlib work memory to fix a KCSAN warning

 - limit number of send clones by maximum memory allocated

 - limit device size extent in case it device shrink races with chunk
   allocation

 - raid56 fixes:
     - fix copy&paste error in RAID6 stripe recovery
     - make error bitmap update atomic

* tag 'for-6.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: raid56: make error_bitmap update atomic
  btrfs: send: limit number of clones and allocated memory size
  btrfs: zlib: zero-initialize zlib workspace
  btrfs: limit device extents to the device size
  btrfs: raid56: fix stripes if vertical errors are found

set_cpus_allowed_ptr() will fail with -EINVAL if the requested
affinity mask is not a subset of the task_cpu_possible_mask() for the
task being updated. Consequently, on a heterogeneous system with cpusets
spanning the different CPU types, updates to the cgroup hierarchy can
silently fail to update task affinities when the effective affinity
mask for the cpuset is expanded.

For example, consider an arm64 system with 4 CPUs, where CPUs 2-3 are
the only cores capable of executing 32-bit tasks. Attaching a 32-bit
task to a cpuset containing CPUs 0-2 will correctly affine the task to
CPU 2. Extending the cpuset to CPUs 0-3, however, will fail to extend
the affinity mask of the 32-bit task because update_tasks_cpumask() will
pass the full 0-3 mask to set_cpus_allowed_ptr().

Extend update_tasks_cpumask() to take a temporary 'cpumask' paramater
and use it to mask the 'effective_cpus' mask with the possible mask for
each task being updated.

Fixes: 431c69fa ("cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()")
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Since commit 8f9ea86f ("sched: Always preserve the user
requested cpumask"), relax_compatible_cpus_allowed_ptr() is calling
__sched_setaffinity() unconditionally. This helps to expose a bug in
the current cpuset hotplug code where the cpumasks of the tasks in
the top cpuset are not updated at all when some CPUs become online or
offline. It is likely caused by the fact that some of the tasks in the
top cpuset, like percpu kthreads, cannot have their cpu affinity changed.

One way to reproduce this as suggested by Peter is:
 - boot machine
 - offline all CPUs except one
 - taskset -p ffffffff $$
 - online all CPUs

Fix this by allowing cpuset_cpus_allowed() to return a wider mask that
includes offline CPUs for those tasks that are in the top cpuset. For
tasks not in the top cpuset, the old rule applies and only online CPUs
will be returned in the mask since hotplug events will update their
cpumasks accordingly.

Fixes: 8f9ea86f ("sched: Always preserve the user requested cpumask")
Reported-by: Will Deacon <will@kernel.org>
Originally-from: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

The touchscreen reports a battery status of 0% and jumps to 1% when a
stylus is used. The device ID was added and the battery ignore quirk was
enabled for it.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Link: https://lore.kernel.org/r/20230120223741.3007-1-l.guzenko@web.deSigned-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

It was reported that commit b300667b ("HID: amd_sfh: Disable the
interrupt for all command") had caused increased resume time on HP Envy
x360.

Before this commit 3 sensors were reported, but they were not actually
functional.  After this commit the sensors are no longer reported, but
also the resume time increased.

To avoid this problem explicitly look for the number of disabled sensors.
If all the sensors are disabled, clean everything up.

Fixes: b300667b ("HID: amd_sfh: Disable the interrupt for all command")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20230203220850.13924-1-mario.limonciello@amd.comSigned-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

On some Logitech mice, such as the G903, and possibly the G403, the HID
events are generated on a different interface to the HID++ one.

If we enable hi-res through the HID++ interface, the HID interface
wouldn't know anything about it, and handle the events as if they were
regular scroll events, making the mouse unusable.

Disable hi-res scrolling on those devices until we implement scroll
events through HID++.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Tobias Klausmann <klausman@schwarzvogel.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216885
Fixes: 908d325e ("HID: logitech-hidpp: Detect hi-res scrolling support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230203101800.139380-1-hadess@hadess.netSigned-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

The initial value of hid->collection[].parent_idx if 0. When
Report descriptor doesn't contain "HID Collection", the value
remains as 0.

In the meanwhile, when the Report descriptor fullfill
all following conditions, it will trigger hid_apply_multiplier
function call.
1. Usage page is Generic Desktop Ctrls (0x01)
2. Usage is RESOLUTION_MULTIPLIER (0x48)
3. Contain any FEATURE items

The while loop in hid_apply_multiplier will search the top-most
collection by searching parent_idx == -1. Because all parent_idx
is 0. The loop will run forever.

There is a Report Descriptor triggerring the deadloop
0x05, 0x01,        // Usage Page (Generic Desktop Ctrls)
0x09, 0x48,        // Usage (0x48)
0x95, 0x01,        // Report Count (1)
0x75, 0x08,        // Report Size (8)
0xB1, 0x01,        // Feature
Signed-off-by: Xin Zhao <xnzhao@google.com>
Link: https://lore.kernel.org/r/20230130212947.1315941-1-xnzhao@google.comSigned-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Pull ELF fix from Al Viro:
 "One of the many equivalent build warning fixes for !CONFIG_ELF_CORE
  configs. Geert's is the earliest one I've been able to find"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  coredump: Move dump_emit_page() to kill unused warning

Pull USB fixes from Greg KH:
 "Here are some small USB fixes that resolve some reported problems.
  These include:

   - gadget driver fixes

   - dwc3 driver fix

   - typec driver fix

   - MAINTAINERS file update.

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: ucsi: Don't attempt to resume the ports before they exist
  usb: gadget: udc: do not clear gadget driver.bus
  usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints
  usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait
  usb: dwc3: qcom: enable vbus override when in OTG dr-mode
  MAINTAINERS: Add myself as UVC Gadget Maintainer

Pull tty/serial driver fixes from Greg KH:
 "Here are some small serial and vt fixes. These include:

   - 8250 driver fixes relating to dma issues

   - stm32 serial driver fix for threaded irqs

   - vc_screen bugfix for reported problems.

  All have been in linux-next for a while with no reported problems"

* tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF
  serial: 8250_dma: Fix DMA Rx rearm race
  serial: 8250_dma: Fix DMA Rx completion race
  serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler

Pull char/misc driver fixes from Greg KH:
 "Here are a number of small char/misc/whatever driver fixes. They
  include:

   - IIO driver fixes for some reported problems

   - nvmem driver fixes

   - fpga driver fixes

   - debugfs memory leak fix in the hv_balloon and irqdomain code
     (irqdomain change was acked by the maintainer)

  All have been in linux-next with no reported problems"

* tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
  kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
  HV: hv_balloon: fix memory leak with using debugfs_lookup()
  nvmem: qcom-spmi-sdam: fix module autoloading
  nvmem: core: fix return value
  nvmem: core: fix cell removal on error
  nvmem: core: fix device node refcounting
  nvmem: core: fix registration vs use race
  nvmem: core: fix cleanup after dev_set_name()
  nvmem: core: remove nvmem_config wp_gpio
  nvmem: core: initialise nvmem->id early
  nvmem: sunxi_sid: Always use 32-bit MMIO reads
  nvmem: brcm_nvram: Add check for kzalloc
  iio: imu: fxos8700: fix MAGN sensor scale and unit
  iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
  iio: imu: fxos8700: fix failed initialization ODR mode assignment
  iio: imu: fxos8700: fix incorrect ODR mode readback
  iio: light: cm32181: Fix PM support on system with 2 I2C resources
  iio: hid: fix the retval in gyro_3d_capture_sample
  iio: hid: fix the retval in accel_3d_capture_sample
  iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
  ...

Pull fbdev fixes from Helge Deller:

 - fix fbcon to prevent fonts bigger than 32x32 pixels to avoid
   overflows reported by syzbot

 - switch omapfb to use kstrtobool()

 - switch some fbdev drivers to use the backlight helpers

* tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbcon: Check font dimension limits
  fbdev: omapfb: Use kstrtobool() instead of strtobool()
  fbdev: fbmon: fix function name in kernel-doc
  fbdev: atmel_lcdfb: Rework backlight status updates
  fbdev: riva: Use backlight helper
  fbdev: omapfb: panel-dsi-cm: Use backlight helper
  fbdev: nvidia: Use backlight helper
  fbdev: mx3fb: Use backlight helper
  fbdev: radeon: Use backlight helper
  fbdev: atyfb: Use backlight helper
  fbdev: aty128fb: Use backlight helper

Pull x86 fix from Borislav Petkov:

 - Prevent the compiler from reordering accesses to debug regs which
   could cause a #VC exception in SEV-ES guests at the wrong place in
   the NMI handling path

* tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses

Pull perf fix from Borislav Petkov:

 - Lock the proper critical section when dealing with perf event context

* tag 'perf_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf_event_pmu_context serialization

Pull powerpc fixes from Michael Ellerman:
 "It's a bit of a big batch for rc6, but just because I didn't send any
  fixes the last week or two while I was on vacation, next week should
  be quieter:

   - Fix a few objtool warnings since we recently enabled objtool.

   - Fix a deadlock with the hash MMU vs perf record.

   - Fix perf profiling of asynchronous interrupt handlers.

   - Revert the IMC PMU nest_init_lock to being a mutex.

   - Two commits fixing problems with the kexec_file FDT size
     estimation.

   - Two commits fixing problems with strict RWX vs kernels running at
     non-zero.

   - Reconnect tlb_flush() to hash__tlb_flush()

  Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy,
  and Sourabh Jain"

* tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush()
  powerpc/kexec_file: Count hot-pluggable memory in FDT estimate
  powerpc/64s/radix: Fix RWX mapping with relocated kernel
  powerpc/64s/radix: Fix crash with unaligned relocated kernel
  powerpc/kexec_file: Fix division by zero in extra size estimation
  powerpc/imc-pmu: Revert nest_init_lock to being a mutex
  powerpc/64: Fix perf profiling asynchronous interrupt handlers
  powerpc/64s: Fix local irq disable when PMIs are disabled
  powerpc/kvm: Fix unannotated intra-function call warning
  powerpc/85xx: Fix unannotated intra-function call warning

Pull RTC fixes from Alexandre Belloni:
 "Here are a few fixes for 6.2. The EFI one is the most important as it
  allows some RTCs to actually work. The other two are warnings that are
  worth fixing.

   - efi: make WAKEUP services optional

   - sunplus: fix format string warning"

* tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: sunplus: fix format string for printing resource
  dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property
  rtc: efi: Enable SET/GET WAKEUP services as optional

Merge tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix two bugs (for building and for signing) when MODULE_SIG_KEY
   contains a PKCS#11 URI

* tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI
  certs: Fix build error when PKCS#11 URI contains semicolon

Pull kvm fixes from Paolo Bonzini:
 "ARM64:

   - Yet another fix for non-CPU accesses to the memory backing the
     VGICv3 subsystem

   - A set of fixes for the setlftest checking for the S1PTW behaviour
     after the fix that went in ealier in the cycle"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: aarch64: Test read-only PT memory regions
  KVM: selftests: aarch64: Fix check of dirty log PT write
  KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs
  KVM: selftests: aarch64: Relax userfaultfd read vs. write checks
  KVM: arm64: Allow no running vcpu on saving vgic3 pending table
  KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status
  KVM: arm64: Add helper vgic_write_guest_lock()

Pull parisc architecture fixes from Helge Deller:

 - Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit
   kernel

 - pdc_iodc_print() dropped chars for newline in strings

 - Drop constants in favour of PRIV_USER

 - use safer strscpy() function in pdc_stable driver

* tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case
  parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c
  parisc: Fix return code of pdc_iodc_print()
  parisc: pdc_stable: use strscpy() to instead of strncpy()

Pull OpenRISC mailing list update from Stafford Horne:
 "The old mailing list for OpenRISC died due to some infrastructure
  issues and the people in charge decided not to keep it running. We
  have migrated this and the users over to kernel.org infrastructure.

  Sending this out now to avoid kernel developers getting lots of
  bounced mails for using the old list"

* tag 'for-linus' of https://github.com/openrisc/linux:
  MAINTAINERS: Update OpenRISC mailing list

Merge tag 'kvmarm-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.2, take #3

- Yet another fix for non-CPU accesses to the memory backing
  the VGICv3 subsystem

- A set of fixes for the setlftest checking for the S1PTW
  behaviour after the fix that went in ealier in the cycle

blit_x and blit_y are u32, so fbcon currently cannot support fonts
larger than 32x32.

The 32x32 case also needs shifting an unsigned int, to properly set bit
31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font",
as reported on:

http://lore.kernel.org/all/IA1PR07MB98308653E259A6F2CE94A4AFABCE9@IA1PR07MB9830.namprd07.prod.outlook.com
Kernel Branch: 6.2.0-rc5-next-20230124
Kernel config: https://drive.google.com/file/d/1F-LszDAizEEH0ZX0HcSR06v5q8FPl2Uv/view?usp=sharing
Reproducer: https://drive.google.com/file/d/1mP1jcLBY7vWCNM60OMf-ogw-urQRjNrm/view?usp=sharingReported-by: Sanan Hasanov <sanan.hasanov@Knights.ucf.edu>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Fixes: 2d2699d9 ("fbcon: font setting should check limitation of driver")
Cc: stable@vger.kernel.org
Tested-by: Miko Larsson <mikoxyzzz@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull block fixes from Jens Axboe:
 "A bit bigger than I'd like at this point, but mostly a bunch of little
  fixes. In detail:

   - NVMe pull request via Christoph:
       - Fix a missing queue put in nvmet_fc_ls_create_association
         (Amit Engel)
       - Clear queue pointers on tag_set initialization failure
         (Maurizio Lombardi)
       - Use workqueue dedicated to authentication (Shin'ichiro
         Kawasaki)

   - Fix for an overflow in ublk (Liu)

   - Fix for leaking a queue reference in block cgroups (Ming)

   - Fix for a use-after-free in BFQ (Yu)"

* tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux:
  blk-cgroup: don't update io stat for root cgroup
  nvme-auth: use workqueue dedicated to authentication
  nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set
  nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set
  nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
  block: Fix the blk_mq_destroy_queue() documentation
  block: ublk: extending queue_size to fix overflow
  block, bfq: fix uaf for bfqq in bic_set_bfqq()

Pull ceph fix from Ilya Dryomov:
 "A safeguard to prevent the kernel client from further damaging the
  filesystem after running into a case of an invalid snap trace.

  The root cause of this metadata corruption is still being investigated
  but it appears to be stemming from the MDS. As such, this is the best
  we can do for now"

* tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-client:
  ceph: blocklist the kclient when receiving corrupted snap trace
  ceph: move mount state enum to super.h

Pull EFI fixes from Ard Biesheuvel:

 - handle potential mremap() failure gracefully

 - don't reject EFI memory attributes table version 2

* tag 'efi-fixes-for-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: fix potential NULL deref in efi_mem_reserve_persistent
  efi: Accept version 2 of memory attributes table

Pull RISC-V fixes from Palmer Dabbelt:

 - A build fix to avoid static branches in cpu_relax(), which greatly
   inflates the jump tables and breaks at least
   CONFIG_CC_OPTIMIZE_FOR_SIZE=y.

 - A fix for a kernel panic when probing impossible instruction
   positions.

 - A fix to disable unwind tables, which are enabled by default for
   GCC-13 and result in unhandled relocations in modules.

* tag 'riscv-for-linus-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: disable generation of unwind tables
  riscv: kprobe: Fixup kernel panic when probing an illegal position
  riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y

Pull drm fixes from Dave Airlie:
 "A few more fixes this week, a bit more spread out though.

  We have a bunch of nouveau regression and stabilisation fixes, along
  with usual amdgpu, and i915. Otherwise just some minor misc ones:

  dma-fence:
   - fix signaling bit for private fences

  panel:
   - boe-tv101wum-nl6 disable fix

  nouveau:
   - gm20b acr regression fix
   - tu102 scrub status fix
   - tu102 wait for firmware fix

  i915:
   - Fixes for potential use-after-free and double-free
   - GuC locking and refcount fixes
   - Display's reference clock value fix

  amdgpu:
   - GC11 fixes
   - DCN 3.1.4 fixes
   - NBIO 4.3 fix
   - DCN 3.2 fixes
   - Properly handle additional cases where DCN is not supported
   - SMU13 fixes

  vc4:
   - fix CEC adapter names

  ssd130x:
   - fix display init regression"

* tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drm: (23 commits)
  drm/amd/display: Properly handle additional cases where DCN is not supported
  drm/amdgpu: Enable vclk dclk node for gc11.0.3
  drm/amd: Fix initialization for nbio 4.3.0
  drm/amdgpu: enable HDP SD for gfx 11.0.3
  drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11
  drm/amd/display: Reset DMUB mailbox SW state after HW reset
  drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2
  drm/amd/display: Adjust downscaling limits for dcn314
  drm/amd/display: Add missing brackets in calculation
  drm/amdgpu: update wave data type to 3 for gfx11
  drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable
  drm/nouveau/acr/gm20b: regression fixes
  drm/nouveau/fb/tu102-: fix register used to determine scrub status
  drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED
  drm/i915/adlp: Fix typo for reference clock
  drm/i915: Fix potential bit_17 double-free
  drm/i915: Fix up locking around dumping requests lists
  drm/i915: Fix request ref counting during error capture & debugfs dump
  drm/i915/guc: Fix locking when searching for a hung request
  drm/i915: Avoid potential vm use-after-free
  ...

Merge tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "25 hotfixes, mainly for MM.  13 are cc:stable"

* tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
  mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()
  Kconfig.debug: fix the help description in SCHED_DEBUG
  mm/swapfile: add cond_resched() in get_swap_pages()
  mm: use stack_depot_early_init for kmemleak
  Squashfs: fix handling and sanity checking of xattr_ids count
  sh: define RUNTIME_DISCARD_EXIT
  highmem: round down the address passed to kunmap_flush_on_unmap()
  migrate: hugetlb: check for hugetlb shared PMD in node migration
  mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
  mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups
  Revert "mm: kmemleak: alloc gray object for reserved region with direct map"
  freevxfs: Kconfig: fix spelling
  maple_tree: should get pivots boundary by type
  .mailmap: update e-mail address for Eugen Hristev
  mm, mremap: fix mremap() expanding for vma's with vm_ops->close()
  squashfs: harden sanity check in squashfs_read_xattr_id_table
  ia64: fix build error due to switch case label appearing next to declaration
  mm: multi-gen LRU: fix crash during cgroup migration
  Revert "mm: add nodes= arg to memory.reclaim"
  zsmalloc: fix a race with deferred_handles storing
  ...

When iterating on a linked list, a result of memremap is dereferenced
without checking it for NULL.

This patch adds a check that falls back on allocating a new page in
case memremap doesn't succeed.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 18df7577 ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
[ardb: return -ENOMEM instead of breaking out of the loop]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230202151554.2310273-1-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Fixes: d180e0a1 ("Drivers: hv: Create debugfs file with hyper-v balloon usage information")
Cc: stable <stable@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230202140918.2289522-1-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'amd-drm-fixes-6.2-2023-02-01' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.2-2023-02-01:

amdgpu:
- GC11 fixes
- DCN 3.1.4 fixes
- NBIO 4.3 fix
- DCN 3.2 fixes
- Properly handle additional cases where DCN is not supported
- SMU13 fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202042309.24144-1-alexander.deucher@amd.com