- 26 Jul, 2010 15 commits
-
-
Paul Mortier authored
When an attempt is made to read the interface strings of the Artisman Watchdog USB dongle (idVendor:idProduct 04b4:0526) an error is written to the dmesg log (uhci_result_common: failed with status 440000) and the dongle resets itself, resulting in a disconnect/reconnect loop. Adding the dongle to the list of devices in quirks.c, with the same quirk Alan Stern's previous patch for the Saitek Cyborg Gold 3D joystick, stops the device from resetting and allows it to be used with no problems. Signed-off-by:
Paul Mortier <mortier@btinternet.com> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sarah Sharp authored
When a configured device is reset, the control endpoint's ring is reused. If control transfers to the device were issued before the device is reset, the dequeue pointer will be somewhere in the middle of the ring. If the device is then issued an address with the set address command, the xHCI driver must provide a valid input context for control endpoint zero. The original code would give the hardware the original input context, which had a dequeue pointer set to the top of the ring. This would cause the host to re-execute any control transfers until it reached the ring's enqueue pointer. When issuing a set address command for a device that has just been configured and then reset, use the control endpoint's enqueue pointer as the hardware's dequeue pointer. Assumption: All control transfers will be completed or cancelled before the set address command is issued to the device. If there are any outstanding control transfers, this code will not work. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sarah Sharp authored
Without this fix, a USB 3.0 port is downgraded to full speed after a port reset of a configured device. The USB 3.0 terminations will be disabled permanently, and USB 3.0 devices will always enumerate as full speed devices, until the host controller is unplugged (if it is an ExpressCard) or the computer is rebooted. Fajun Chen traced this traced the speed downgrade issue to the port reset and the interpretation of port status in USB hub driver code. The hub code was not testing for the port being a SuperSpeed port, and it fell through to the else case of Full Speed. The following patch adds SuperSpeed mapping from the port status, and fixes the speed downgrade issue. Reported-by:
Fajun Chen <fajun.chen@seagate.com> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sarah Sharp authored
Commit 6c12db90 also seems to have introduced a bug that is triggered when the command ring is about to wrap. The inc_enq() function will not have moved the enqueue pointer past the link TRB. It is supposed to be moved past the link TRB in prepare_ring(), which should be called before a TD is enqueued. However, the queue_command() function never calls the prepare_ring() function because prepare_ring() is only supposed to be used for endpoint rings. That means the enqueue pointer will not be moved past the link TRB, and will get overwritten. The fix is to make queue_command() call prepare_ring() with a fake endpoint status (set to running). Then the enqueue pointer will get moved past the link TRB. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Dennis Jansen authored
usbserial: Add AMOI Skypephone S2 support. This patch adds support for the AMOI Skypephone S2 to the usbserial module. Tested-by:
Dennis Jansen <Dennis.Jansen@web.de> Signed-off-by:
Dennis Jansen <Dennis.Jansen@web.de> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Andrew Bird authored
Adds support for the Generic Qualcomm Gobi 2000 WWAN UMTS/CDMA modem Signed-off-by:
Andrew Bird <ajb@spheresytems.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Colin Leitner authored
ftdi_sio: support for Signalyzer tools based on FTDI chips This patch adds support for the Xverve Signalyzers. Signed-off-by:
Colin Leitner <colin.leitner@googlemail.com> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Vladimir Zapolskiy authored
To escape from data abort in interrupt handler, it is required to check for a connected gadget before delivering control requests. The change fixes the following panic, which occurs with no loaded gadget driver and input USB_REQ_GET_DESCRIPTOR request: Kernel panic - not syncing: Fatal exception in interrupt [<c0025874>] (unwind_backtrace+0x0/0xd8) from [<c0253f14>] (panic+0x40/0x110) [<c0253f14>] (panic+0x40/0x110) from [<c002470c>] (die+0x154/0x180) [<c002470c>] (die+0x154/0x180) from [<c0026448>] (__do_kernel_fault+0x64/0x74) [<c0026448>] (__do_kernel_fault+0x64/0x74) from [<c0026610>] (do_page_fault+0x1b8/0x1cc) [<c0026610>] (do_page_fault+0x1b8/0x1cc) from [<c00202d4>] (do_DataAbort+0x34/0x94) [<c00202d4>] (do_DataAbort+0x34/0x94) from [<c0020a60>] (__dabt_svc+0x40/0x60) Exception stack(0xc0327ea8 to 0xc0327ef0) 7ea0: bf0026b0 c0327ef0 c0327ee4 00000000 bf002590 00000093 7ec0: 00000001 bf0026b0 bf002990 00000000 00000008 0000143d 00003f00 c0327ef0 7ee0: bf001364 bf001360 20000093 ffffffff [<c0020a60>] (__dabt_svc+0x40/0x60) from [<bf001360>] (s3c2410_udc_irq+0x5b8/0x778 [s3c2410_udc]) [<bf001360>] (s3c2410_udc_irq+0x5b8/0x778 [s3c2410_udc]) from [<c0058aa0>] (handle_IRQ_event+0x3c/0x104) [<c0058aa0>] (handle_IRQ_event+0x3c/0x104) from [<c005a428>] (handle_edge_irq+0x12c/0x164) [<c005a428>] (handle_edge_irq+0x12c/0x164) from [<c0020068>] (asm_do_IRQ+0x68/0x88) [<c0020068>] (asm_do_IRQ+0x68/0x88) from [<c0020aa4>] (__irq_svc+0x24/0xa0) Signed-off-by:
Vladimir Zapolskiy <vzapolskiy@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Przemo Firszt authored
Nokia S60 phones expose two ACM channels. The first is a modem, the second is 'vendor-specific' but is treated as a serial device at the S60 end, so we want to expose it on Linux too. Signed-off-by:
Przemo Firszt <przemo@firszt.eu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
august huber authored
Add VID/PID for Sierra Wireless 250U USB dongle to sierra.c Allows use of 3G radio only Signed-off-by:
August Huber <gus@pbx.org> Cc: Elina Pasheva <epasheva@sierrawireless.com> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Ömer Sezgin Ugurlu authored
Signed-off-by:
Omer Sezgin Ugurlu <omer.ugurlu@a-kent.com> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / Sleep: Allow the NVS saving to be skipped during suspend to RAM ACPI: create "processor.bm_check_disable" boot param ACPI: skip checking BM_STS if the BIOS doesn't ask for it ACPI: fix unused function warning ACPI: processor: fix processor_physically_present on UP ACPI video: fix string mismatch for Sony SR290 laptop ACPI battery: don't invoke power_supply_changed twice when battery is hot-added ACPI: handle systems which asynchoronously enable ACPI mode
-
Eric W. Biederman authored
This fixes the regression in 2.6.35-rcX where bluetooth network devices would fail to be deleted from sysfs, causing their destruction and recreation to fail. In addition this fixes the mac80211_hwsim driver where it would leave around sysfs files when the driver was removed. This problem is discussed at https://bugzilla.kernel.org/show_bug.cgi?id=16257 The reason for the regression is that the network namespace support added to sysfs expects and requires that network devices be put in directories that can contain only network devices. Today get_device_parent almost provides that guarantee for all class devices, except for a specific exception when the parent of a class devices is a class device. It would be nice to simply remove that arguably incorrect special case, but apparently the input devices depend on it being there. So I have only removed it for class devices with network namespace support. Which today are the network devices. It has been suggested that a better fix would be to change the parent device from a class device to a bus device, which in the case of the bluetooth driver would change /sys/class/bluetooth to /sys/bus/bluetoth, I can not see how we would avoid significant userspace breakage if we were to make that change. Adding an extra directory in the path to the device will also be userspace visible but it is much less likely to break things. Everything is still accessible from /sys/class (for example), and it fixes two bugs. Adding an extra directory fixes a 3 year old regression introduced with the new sysfs layout that makes it impossible to rename bnep0 network devices to names that conflict with hci device attributes like hci_revsion. Adding an additional directory removes the new failure modes introduced by the network namespace code. If it weren't for the regession in the renaming of network devices I would figure out how to just make the sysfs code deal with this configuration of devices. In summary this patch fixes regressions by changing: "/sys/class/bluetooth/hci0/bnep0" to "/sys/class/bluetooth/hci0/net/bnep0". Reported-by:
Johannes Berg <johannes@sipsolutions.net> Reported-by:
Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michael S. Tsirkin authored
virtio ring was changed to return an error code on OOM, but one caller was missed and still checks for vq->vring.num. The fix is just to check for <0 error code. Long term it might make sense to change goto add_head to just return an error on oom instead, but let's apply a minimal fix for 2.6.35. Reported-by:
Chris Mason <chris.mason@oracle.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Tested-by:
Chris Mason <chris.mason@oracle.com> Cc: stable@kernel.org # .34.x Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dmitry Torokhov authored
Commit 3fea6026 ("Input: twl40300-keypad - fix handling of "all ground" rows") broke compilation as I managed to use non-existent keycodes. Reported-by:
Arjan van de Ven <arjan@infradead.org> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 Jul, 2010 2 commits
-
-
Len Brown authored
-
Rafael J. Wysocki authored
Commit 2a6b6976 (ACPI: Store NVS state even when entering suspend to RAM) caused the ACPI suspend code save the NVS area during suspend and restore it during resume unconditionally, although it is known that some systems need to use acpi_sleep=s4_nonvs for hibernation to work. To allow the affected systems to avoid saving and restoring the NVS area during suspend to RAM and resume, introduce kernel command line option acpi_sleep=nonvs and make acpi_sleep=s4_nonvs work as its alias temporarily (add acpi_sleep=s4_nonvs to the feature removal file). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16396 . Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by:
tomas m <tmezzadra@gmail.com> Signed-off-by:
Len Brown <len.brown@intel.com>
-
- 23 Jul, 2010 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: vmlinux.lds: fix .data..init_task output section (fix popwerpc boot) powerpc: Fix erroneous lmb->memblock conversions powerpc/mm: Add some debug output when hash insertion fails powerpc/mm: Fix bugs in huge page hashing powerpc/mm: Move around testing of _PAGE_PRESENT in hash code powerpc/mm: Handle hypervisor pte insert failure in __hash_page_huge powerpc/kexec: Fix boundary case for book-e kexec memory limits
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: nconfig: Fix segfault when help contains special characters kbuild: Fix make rpm kbuild: Make the setlocalversion script POSIX-compliant
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available perf annotate: Fix handling of goto labels that are valid hex numbers tracing: Properly align linker defined symbols perf symbols: Fix directory descriptor leaking perf: Fix various display bugs with parent filtering
-
Stephen Boyd authored
nconfig segfaults when help text contains the character '%'. For a quick example, navigate to the kernel compression options and get the help for bzip2. Doing so triggers a call to mvwprintw() with a string containing '%' and no extra arguments to fill in the specifier's value. Fix this case by printing the literal string retrieved from the kconfig. #0 0x00002b52b6b11d83 in vfprintf () from /lib/libc.so.6 #1 0x00002b52b6bad010 in __vsnprintf_chk () from /lib/libc.so.6 #2 0x00002b52b623991b in _nc_printf_string () from /lib/libncursesw.so.5 #3 0x00002b52b6234cff in vwprintw () from /lib/libncursesw.so.5 #4 0x00002b52b6234db9 in mvwprintw () from /lib/libncursesw.so.5 #5 0x00000000004151d8 in fill_window (win=0x21b64c0, text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression ratio and speed is intermediate.\nDecompression speed is slowest among the three. The kernel\nsize is about 10% smaller with bzip2, in comparison to gzip.\nBzip2 us"...) at scripts/kconfig/nconf.gui.c:229 #6 0x0000000000416335 in show_scroll_win (main_window=0x21a5630, title=0x157fa30 "Bzip2", text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression ratio and speed is intermediate.\nDecompression speed is slowest among the three. The kernel\nsize is about 10% smaller with bzip2, in comparison to gzip.\nBzip2 us"...) at scripts/kconfig/nconf.gui.c:535 #7 0x00000000004055b2 in show_help (menu=0x157f9d0) at scripts/kconfig/nconf.c:1257 #8 0x0000000000405897 in conf_choice (menu=0x157f130) at scripts/kconfig/nconf.c:1321 #9 0x0000000000405326 in conf (menu=0x157d130) at scripts/kconfig/nconf.c:1208 #10 0x00000000004052e8 in conf (menu=0xb434a0) at scripts/kconfig/nconf.c:1203 #11 0x0000000000406092 in main (ac=2, av=0x7fff96a93c38) Cc: Michal Marek <mmarek@suse.cz> Cc: Nir Tzachar <nir.tzachar@gmail.com> Signed-off-by:
Stephen Boyd <bebarino@gmail.com> Signed-off-by:
Michal Marek <mmarek@suse.cz>
-
Benjamin Herrenschmidt authored
-
Sam Ravnborg authored
The .data..init_task output section was missing a load offset causing a popwerpc target to fail to boot. Sean MacLennan tracked it down to the definition of INIT_TASK_DATA_SECTION(). There are only two users of INIT_TASK_DATA_SECTION() in the kernel today: cris and popwerpc. cris do not support relocatable kernels and is thus not impacted by this change. Fix INIT_TASK_DATA_SECTION() to specify load offset like all other output sections. Reported-by:
Sean MacLennan <smaclennan@pikatech.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
Oooops... we missed these. We incorrectly converted strings used when parsing the device-tree on pseries, thus breaking access to drconf memory and hotplug memory. While at it, also revert some variable names that represent something the FW calls "lmb" and thus don't need to be converted to "memblock". Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> ---
-
Benjamin Herrenschmidt authored
This adds some debug output to our MMU hash code to print out some useful debug data if the hypervisor refuses the insertion (which should normally never happen). Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> ---
-
Benjamin Herrenschmidt authored
There's a couple of nasty bugs lurking in our huge page hashing code. First, we don't check the access permission atomically with setting the _PAGE_BUSY bit, which means that the PTE value we end up using for the hashing might be different than the one we have checked the access permissions for. We've seen cases where that leads us to try to use an invalidated PTE for hashing, causing all sort of "interesting" issues. Then, we also failed to set _PAGE_DIRTY on a write access. Finally, a minor tweak but we should return 0 when we find the PTE busy, in order to just re-execute the access, rather than 1 which means going to do_page_fault(). Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> ---
-
- 22 Jul, 2010 14 commits
-
-
Benjamin Herrenschmidt authored
Instead of adding _PAGE_PRESENT to the access permission mask in each low level routine independently, we add it once from hash_page(). We also move the preliminary access check (the racy one before the PTE is locked) up so it applies to the huge page case. This duplicates code in __hash_page_huge() which we'll remove in a subsequent patch to fix a race in there. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anton Blanchard authored
If the hypervisor gives us an error on a hugepage insert we panic. The normal page code already handles this by returning an error instead and we end calling low_hash_fault which will just kill the task if possible. The patch below does a similar thing for the hugepage case. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Len Brown authored
-
Len Brown authored
-
Len Brown authored
-
Len Brown authored
-
Len Brown authored
-
Len Brown authored
-
Len Brown authored
processor.bm_check_disable=1" prevents Linux from checking BM_STS before entering C3-type cpu power states. This may be useful for a system running acpi_idle where the BIOS exports FADT C-states, _CST IO C-states, or _CST FFH C-states with the BM_STS bit set; while configuring the chipset to set BM_STS more frequently than perhaps is optimal. Note that such systems may have been developed using a tickful OS that would quickly clear BM_STS, rather than a tickless OS that may go for some time between checking and clearing BM_STS. Note also that an alternative for newer systems is to use the intel_idle driver, which always ignores BM_STS, relying Linux device drivers to register constraints explicitly via PM_QOS. https://bugzilla.kernel.org/show_bug.cgi?id=15886Signed-off-by:
Len Brown <len.brown@intel.com>
-
Len Brown authored
It turns out that there is a bit in the _CST for Intel FFH C3 that tells the OS if we should be checking BM_STS or not. Linux has been unconditionally checking BM_STS. If the chip-set is configured to enable BM_STS, it can retard or completely prevent entry into deep C-states -- as illustrated by turbostat: http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/ ref: Intel Processor Vendor-Specific ACPI Interface Specification table 4 "_CST FFH GAS Field Encoding" Bit 1: Set to 1 if OSPM should use Bus Master avoidance for this C-state https://bugzilla.kernel.org/show_bug.cgi?id=15886Signed-off-by:
Len Brown <len.brown@intel.com>
-
Conny Seidel authored
make version 3.80 doesn't support "else ifdef" on the same line, also it doesn't support unindented nested constructs. Build fails with: Makefile:608: Extraneous text after `else' directive Makefile:611: *** only one `else' per conditional. Stop. This patch fixes the build for make 3.80. Cc: Ingo Molnar <mingo@elte.hu>, Cc: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <1278430783-17259-1-git-send-email-conny.seidel@amd.com> Signed-off-by:
Conny Seidel <conny.seidel@amd.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - relax capability ID checks on newer hardware Input: twl40300-keypad - fix handling of "all ground" rows Input: gamecon - reference correct pad in gc_psx_command() Input: gamecon - reference correct input device in NES mode Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi' Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table Input: qt2160 - rename kconfig symbol name
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add quirk to make HP DV5000 laptop resume drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl Fix ttm_page_alloc.c build breakage drm/radeon/kms: fix legacy LVDS dpms sequence drm/radeon/kms: drop taking lock around crtc lookup.
-