A header include path without $(srctree)/ is suspicous because it does
not work with O= builds.

I can build drivers/staging/rts5208/ without this include path.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200104163710.21582-1-masahiroy@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.6 cycle

New device support

* ad7091r5 ADC
  - New driver with follow up patch adding scale and vref support.
  - DT bindings
* ad7923
  - Support for ad7908, ad7918 and ad7928 added to driver.
* bma180
  - Support the BMA254 accelerometer. Required fairly substantial rework
    to allow for small differences between this an existing parts.
* bma400 accelerometer
  - New driver with follow up patch for regulator support.
  - DT bindings.
* asc dlhl60d
  - New driver support this range of pressure and temperature sensors.
  - DT bindings.
* ltc2496 ADC
  - New driver to support this ADC.
  - Split the existing LTC2497 driver generic component out and reuse.
  - DT bindings.
* parallax ping
  - New driver supporting ultrasonic and laser tof distance sensors.
  - Bindings for these sensors.

New features

* core
  - New char type for read_raw returns, used for thermocouple types.
  - Rename read_first_n callback to read.   The reasons behind the original
    naming are lost to the mists of time.
* ad799x
  - Allow pm_ops to disable device completely allowing regulator power down.
* bma180
  - Enable basic regulator support.
* dmaengine buffer
  - Report platform data alignment requirements via new ABI.
* max31856
  - Add option to set mains filter rejection frequency and document
    new in_temp_filter_notch_center_frequency ABI.
  - Add support for configuring HW averaging (oversampling ratio)
  - Add runtime configuration of thermocouple type and document new ABI.
* maxim-thermocouple
  - Add read only access to thermocouple type using new ABI, includes
    adding more specific compatibles to reflect which variant of the
    chip is being used.
* mpu6050
  - Provide option to support the PMU9150 in package magnetometer directly
    rather than via auxiliary bus.
* stm32_adc
  - Add overrun interrupt checks to detect if this happens.
* st_lsm6dsx
  - Enable the sensor-hub support for lsm6dsm. Includes various reworks to
    allow this.

Cleanups and minor fixes

* Subsystem wide
  - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
  - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
* ad7266
  - Convert to GPIO descriptors.
* ad7303
  - Avoid a dance with checking if the regulator is supplied by just
    using the optional request interface.
* ad7887
  - Simplify channel specification assignment to enable adding more devices.
* ad7923
  - Drop some unused and largely pointless defines of BOB_N==N variety.
  - Tidy up checkpatch warnings.
  - Add missing of_device_id table.
* adf4350
  - Convert to GPIO descriptors.
* ak8975
  - Convert to GPIO descriptors.
* ADIS library and drivers
  - Expand scope of txrx_lock to cover all state and rename as state_lock
  - Add unlocked read / write to allow grouping of consecutive calls under
    single lock / unlock.
  - Add unlocked check_status, reset to allow grouping under single
    lock / unlock.
  - Remove remaining uses of core mlock for local state protection.
    mlock should never be used directly as it protects tightly defined
    core IIO device management state.
* adis16240
  - Enforce only supported SPI mode on driver load + add DT binding doc.
* atlas-ph-sensor
  - Rename to atlas-sensor given it now covers things beyond ph sensors.
* bma180
  - Use local dev variable to tidy up code.
  - Use c99 style explicity .member assignment to make driver more readable.
* bmp280
  - Drop ACPI support. No evidence this was used and appropriate ID is not
    registered.
  - Allow ACPI to bind device via PRP0001
* dmaengine buffer
  - Use dma_request_chan instead of dma_request_slave_channel_reason as that
    ABI is going away.
  - Add module info to avoid tainting the kernel.
* hts221
  - Avoid magic number defines when only used to fill structure elements
    that are self describing.
* lm3533
  - Drop a stray semicolon.
* max9611
  - Cleanup enum handling to be more resilient to future changes.
* mpu6050
  - Delete MPU9150 from supported SPI devices as doesn't provide SPI.
  - Select I2C_MUX again after kbuild issue fixed elsewhere.
* stm32-timer
  - Drop an unnecessary register update.
* ssp_sensors
  - Convert to GPIO descriptors.
* st_sensors
  - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
    anyway.
  - Make default platform data structures __maybe_unsued.
  - Fill in some missing kernel-doc function parameters.
* st_lsm6dsx
  - white space fixes.
  - Mark some constants that aren't always used as __maybe_unused.
  - Drop of ID table guards as they just pervent use under ACPI.
  - Switch to device properties to allow ACPI usage.
* st_uvis25
  - Drop acpi.h include as no ACPI APIs used.
* ti-ads1015
  - Drop legacy platform data as no one seems to be using it.
  - Use the device property API instead of OF specific.
* ti-ads7950
  - typo fix in error message.

* tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits)
  iio: accel: bma180: BMA254 support
  iio: pressure: bmp280: Allow device to be enumerated from ACPI
  iio: pressure: bmp280: Drop ACPI support
  dt-bindings: iio: adc: convert sd modulator to json-schema
  iio: buffer: rename 'read_first_n' callback to 'read'
  iio: buffer-dmaengine: Report buffer length requirements
  bindings: iio: pressure: Add documentation for dlh driver
  dt-bindings: Add asc vendor
  iio: pressure: Add driver for DLH pressure sensors
  iio: buffer-dmaengine: Add module information
  iio: accel: bma180: Use explicit member assignment
  iio: accel: bma180: Basic regulator support
  iio: accel: bma180: Add dev helper variable
  iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm
  iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output
  iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page
  iio: imu: st_lsm6dsx: check if pull_up is located in primary page
  iio: imu: st_lsm6dsx: check if master_enable is located in primary page
  iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings
  iio: light: remove unneeded semicolon
  ...

Currently calls to wfx_alloc_hif are not checking for a null return
when a memory allocation fails and this leads to null pointer
dereferencing issues.  Fix this by adding null pointer checks and
returning passing down -ENOMEM errors where necessary. The error
checking in the current driver is a bit sparse, so this may need
some extra attention later if required.

Fixes: f95a29d4 ("staging: wfx: add HIF commands helpers")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191221001543.15255-1-colin.king@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add STAGING prefix to config names to avoid collsion with fs/exfat config.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Link: https://lore.kernel.org/r/20200103011345.25245-1-namjae.jeon@samsung.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary parenthesis to abide by kernel
coding-style.
Signed-off-by: Amir Mahdi Ghorbanian <indigoomega021@gmail.com>
Link: https://lore.kernel.org/r/20191230155520.GA27072@user-ThinkPad-X230Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable bContinual in Efuse_PgPacketRead() is only used to break
out of a while loop. Remove the variable and use break instead.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20191220174413.13913-1-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In kpc_dma_transfer(), the assertion that priv is NULL and priv->ldev
is NULL, are never satisfied. The two callers of the function,
dereference the fields before the function is called. This patch
removes the two BUG_ON calls.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Link: https://lore.kernel.org/r/20191219172118.17456-1-pakki001@umn.eduSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds support for the BMA254 variant of this
accelerometer. The only difference for the simple IIO
driver is that values are 12 bit and the temperature
offset differs by 1 degree.

Whilst wildcards in naming are normally frowned upon:

The cases where I have labeled variables "25x" is where the
models are identical, so as to make things easier for people
that want to add support for BMA253 and BMA255.

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There is no need to limit the driver use by OF/platform code.
In this case we simple remove redundant OF parts from the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There is no evidence of officially registered ACPI IDs for these devices.
Thus, revert ACPI support from the driver. All authors of the respective
changes are being informed here:

  d5c94568 ("iio: add bmp280 pressure and temperature driver")
  6dba72ec ("iio: pressure: bmp280: add support for BMP180")
  14beaa8f ("iio: pressure: bmp280: add humidity support")

Above seems a cargo cult without paying attention to how ACPI IDs
are being allocated.

Cc: Vlad Dogaru <ddvlad@gmail.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Convert the sigma delta modulator bindings
to DT schema format using json-schema.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

It is implied that 'read' will read the first n bytes and not e.g. bytes
only from offsets within the buffer that are a prime number.

This change is non-functional, mostly just a rename.
A secondary intent with this patch is to make room later to add a write
callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The dmaengine buffer has some length alignment requirements that can differ
from platform to platform. If the length alignment requirements are not met
unexpected behavior like dropping of samples can occur.

Currently these requirements are not reported and applications need to know
the requirements of the platform by some out-of-band means.

Add a new buffer attribute that reports the length alignment requirements
called `length_align_bytes`. The reported length alignment is in bytes that
means the buffer length alignment in sample sets depends on the number of
enabled channels and the bytes per channel. Applications using this
attribute to determine the buffer size requirements need to consider this.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add a device tree binding documentation for DLH series pressure
sensors.
Signed-off-by: Tomislav Denis <tomislav.denis@avl.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

All Sensors Corporation is a manufacturer of MEMS piezoresitive
ultra low pressure sensors and pressure transducers.
Signed-off-by: Tomislav Denis <tomislav.denis@avl.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

All Sensors DLH is series of low voltage digital pressure sensors.
Additionally to pressure value sensors deliver a temperature value.
Sensors can be accessed over I2C and SPI, this driver supports
only I2C access.
Signed-off-by: Tomislav Denis <tomislav.denis@avl.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Make sure that the industrialio-buffer-dmaengine has proper license
information so it can be build as a module and loaded without tainting the
kernel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This uses the C99 explicit .member assignment for the
variant data in struct bma180_part_info. This makes it
easier to understand and add new variants.

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This brings up the VDD and VDDIO regulators using the
regulator framework. Platforms that do not use regulators
will provide stubs or dummy regulators.

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Having a shorthand "dev" instead of &client->dev everywhere
makes the code easier to read (more compact).

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Enabled i2c master controller support for LSM6DSM sensor. Enable
ext_sensor0 for lsm6dsm. This series has been tested using LIS2MDL as
slave device connected to the i2c controller of the LSM6DSM
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Rename st_lsm6dsx_shub_read_reg routine in st_lsm6dsx_shub_read_output
since it is used to read from sensorhub channel0 output register
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Check if the sensor hub output register is located in the primary or in the
secondary memory page. This is a preliminary patch to support i2c master
controller on lsm6dsm devices
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Check if the pull up register is located in the primary or in the
secondary memory page. This is a preliminary patch to support i2c master
controller on lsm6dsm devices
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Check if the master enable register is located in the primary or in the
secondary memory page. This is a preliminary patch to support i2c master
controller on lsm6dsm devices
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Export max number of slave devices supported by the i2c master
controller in st_lsm6dsx_shub_settings data structure.
This is a preliminary patch to support i2c master controller
on lsm6dsm sensors
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fixes coccicheck warning:

./drivers/iio/light/lm3533-als.c:745:2-3: Unneeded semicolon
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Since the orginal scope of the driver was to only support
the pH product from Atlas it has evolved to other sensors.

Rename the file, driver name, and regmap to atlas-sensor which
reflects this, although keep CONFIG_ATLAS_PH_SENSOR to not cause
regressions with current configurations.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Kernel documentation script complains that some of the function parameters
are not described:

.../common/st_sensors/st_sensors_trigger.c:29: warning: Function parameter or member 'indio_dev' not described in 'st_sensors_new_samples_available'
.../common/st_sensors/st_sensors_trigger.c:29: warning: Function parameter or member 'sdata' not described in 'st_sensors_new_samples_available'

Describe function parameters where it's appropriate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Since we put static variable to a header file it's copied to each module
that includes the header. But not all of them are actually used it.

Mark default_press_pdata with __maybe_unused to calm a compiler down:

In file included from drivers/iio/pressure/st_pressure_spi.c:18:
drivers/iio/pressure/st_pressure.h:40:46: warning: ‘default_press_pdata’ defined but not used [-Wunused-const-variable=]
   40 | static const struct st_sensors_platform_data default_press_pdata = {
      |                                              ^~~~~~~~~~~~~~~~~~~
...
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Since we put static variable to a header file it's copied to each module
that includes the header. But not all of them are actually used it.

Mark default_accel_pdata with __maybe_unused to calm a compiler down:

In file included from drivers/iio/accel/st_accel_i2c.c:19:
drivers/iio/accel/st_accel.h:67:46: warning: ‘default_accel_pdata’ defined but not used [-Wunused-const-variable=]
   67 | static const struct st_sensors_platform_data default_accel_pdata = {
      |                                              ^~~~~~~~~~~~~~~~~~~
...
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Since we put static variable to a header file it's copied to each module
that includes the header. But not all of them are actually used it.

Mark gyro_pdata with __maybe_unused to calm a compiler down:

In file included from drivers/iio/gyro/st_gyro_i2c.c:18:
drivers/iio/gyro/st_gyro.h:31:46: warning: ‘gyro_pdata’ defined but not used [-Wunused-const-variable=]
   31 | static const struct st_sensors_platform_data gyro_pdata = {
      |                                              ^~~~~~~~~~
...
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

ACPI_PTR() takes care of the argument in case of !CONFIG_ACPI.
Remove unnecessary #else branch.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

ACPI_PTR() takes care of the argument in case of !CONFIG_ACPI.
Remove unnecessary #else branch.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There is no evidence that the driver supports or needs ACPI APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There is no need to have OF guard against ID table.
Drop it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Since we put static variable to a header file it's copied to each module
that includes the header. But not all of them are actually used it.

Mark predefined constants with __maybe_unused to calm a compiler down:

In file included from drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c:17:
.../st_lsm6dsx/st_lsm6dsx.h:399:28: warning: ‘st_lsm6dsx_available_scan_masks’ defined but not used [-Wunused-const-variable=]
  399 | static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
      |                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../st_lsm6dsx/st_lsm6dsx.h:392:36: warning: ‘st_lsm6dsx_event’ defined but not used [-Wunused-const-variable=]
  392 | static const struct iio_event_spec st_lsm6dsx_event = {
      |                                    ^~~~~~~~~~~~~~~~
...
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The ad7928 is software compatible with the ad7923.
The ad7908 and ad7918 are the 8 and 10-bit versions of the ad7928.
Signed-off-by: Daniel Junho <djunho@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Accomplish device tree compatibility to driver AD7923
by adding of_device_id table and making a subsequent call to
MODULE_DEVICE_TABLE.
Signed-off-by: Daniel Junho <djunho@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>