- 09 Aug, 2012 1 commit
-
-
Roland Dreier authored
commit e2397c70 upstream. Many SCSI commands are defined to return a CHECK CONDITION / ILLEGAL REQUEST with ASC set to LOGICAL BLOCK ADDRESS OUT OF RANGE if the initiator sends a command that accesses a too-big LBA. Add an enum value and case entries so that target code can return this status. Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 29 Jul, 2012 24 commits
-
-
Greg Kroah-Hartman authored
-
Jeff Layton authored
commit 3cf003c0 upstream. [The async read code was broadened to include uncached reads in 3.5, so the mainline patch did not apply directly. This patch is just a backport to account for that change.] Jian found that when he ran fsx on a 32 bit arch with a large wsize the process and one of the bdi writeback kthreads would sometimes deadlock with a stack trace like this: crash> bt PID: 2789 TASK: f02edaa0 CPU: 3 COMMAND: "fsx" #0 [eed63cbc] schedule at c083c5b3 #1 [eed63d80] kmap_high at c0500ec8 #2 [eed63db0] cifs_async_writev at f7fabcd7 [cifs] #3 [eed63df0] cifs_writepages at f7fb7f5c [cifs] #4 [eed63e50] do_writepages at c04f3e32 #5 [eed63e54] __filemap_fdatawrite_range at c04e152a #6 [eed63ea4] filemap_fdatawrite at c04e1b3e #7 [eed63eb4] cifs_file_aio_write at f7fa111a [cifs] #8 [eed63ecc] do_sync_write at c052d202 #9 [eed63f74] vfs_write at c052d4ee #10 [eed63f94] sys_write at c052df4c #11 [eed63fb0] ia32_sysenter_target at c0409a98 EAX: 00000004 EBX: 00000003 ECX: abd73b73 EDX: 012a65c6 DS: 007b ESI: 012a65c6 ES: 007b EDI: 00000000 SS: 007b ESP: bf8db178 EBP: bf8db1f8 GS: 0033 CS: 0073 EIP: 40000424 ERR: 00000004 EFLAGS: 00000246 Each task would kmap part of its address array before getting stuck, but not enough to actually issue the write. This patch fixes this by serializing the marshal_iov operations for async reads and writes. The idea here is to ensure that cifs aggressively tries to populate a request before attempting to fulfill another one. As soon as all of the pages are kmapped for a request, then we can unlock and allow another one to proceed. There's no need to do this serialization on non-CONFIG_HIGHMEM arches however, so optimize all of this out when CONFIG_HIGHMEM isn't set. Reported-by:
Jian Li <jiali@redhat.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Tushar Behera authored
commit bdd3cc26 upstream. The rate of xusbxti clock is set in individual machine files. The default value should be defined at the clock definition and individual machine files should modify it if required. Division by zero in kernel. [<c0011849>] (unwind_backtrace+0x1/0x9c) from [<c022c663>] (Ldiv0+0x9/0x12) [<c022c663>] (Ldiv0+0x9/0x12) from [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) from [<c0019e67>] (clk_set_rate+0x2f/0x78) Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Mikulas Patocka authored
commit 7c8d3a42 upstream. We can't guarantee that REQ_DISCARD on dm-mirror zeroes the data even if the underlying disks support zero on discard. So this patch sets ti->discard_zeroes_data_unsupported. For example, if the mirror is in the process of resynchronizing, it may happen that kcopyd reads a piece of data, then discard is sent on the same area and then kcopyd writes the piece of data to another leg. Consequently, the data is not zeroed. The flag was made available by commit 983c7db3 (dm crypt: always disable discard_zeroes_data). Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 751f188d upstream. This patch fixes a crash when a discard request is sent during mirror recovery. Firstly, some background. Generally, the following sequence happens during mirror synchronization: - function do_recovery is called - do_recovery calls dm_rh_recovery_prepare - dm_rh_recovery_prepare uses a semaphore to limit the number simultaneously recovered regions (by default the semaphore value is 1, so only one region at a time is recovered) - dm_rh_recovery_prepare calls __rh_recovery_prepare, __rh_recovery_prepare asks the log driver for the next region to recover. Then, it sets the region state to DM_RH_RECOVERING. If there are no pending I/Os on this region, the region is added to quiesced_regions list. If there are pending I/Os, the region is not added to any list. It is added to the quiesced_regions list later (by dm_rh_dec function) when all I/Os finish. - when the region is on quiesced_regions list, there are no I/Os in flight on this region. The region is popped from the list in dm_rh_recovery_start function. Then, a kcopyd job is started in the recover function. - when the kcopyd job finishes, recovery_complete is called. It calls dm_rh_recovery_end. dm_rh_recovery_end adds the region to recovered_regions or failed_recovered_regions list (depending on whether the copy operation was successful or not). The above mechanism assumes that if the region is in DM_RH_RECOVERING state, no new I/Os are started on this region. When I/O is started, dm_rh_inc_pending is called, which increases reg->pending count. When I/O is finished, dm_rh_dec is called. It decreases reg->pending count. If the count is zero and the region was in DM_RH_RECOVERING state, dm_rh_dec adds it to the quiesced_regions list. Consequently, if we call dm_rh_inc_pending/dm_rh_dec while the region is in DM_RH_RECOVERING state, it could be added to quiesced_regions list multiple times or it could be added to this list when kcopyd is copying data (it is assumed that the region is not on any list while kcopyd does its jobs). This results in memory corruption and crash. There already exist bypasses for REQ_FLUSH requests: REQ_FLUSH requests do not belong to any region, so they are always added to the sync list in do_writes. dm_rh_inc_pending does not increase count for REQ_FLUSH requests. In mirror_end_io, dm_rh_dec is never called for REQ_FLUSH requests. These bypasses avoid the crash possibility described above. These bypasses were improperly implemented for REQ_DISCARD when the mirror target gained discard support in commit 5fc2ffea (dm raid1: support discard). In do_writes, REQ_DISCARD requests is always added to the sync queue and immediately dispatched (even if the region is in DM_RH_RECOVERING). However, dm_rh_inc and dm_rh_dec is called for REQ_DISCARD resusts. So it violates the rule that no I/Os are started on DM_RH_RECOVERING regions, and causes the list corruption described above. This patch changes it so that REQ_DISCARD requests follow the same path as REQ_FLUSH. This avoids the crash. Reference: https://bugzilla.redhat.com/837607Signed-off-by:
-
Mikulas Patocka authored
commit 650d2a06 upstream. When process_discard receives a partial discard that doesn't cover a full block, it sends this discard down to that block. Unfortunately, the block can be shared and the discard would corrupt the other snapshots sharing this block. This patch detects block sharing and ends the discard with success when sending it to the shared block. The above change means that if the device supports discard it can't be guaranteed that a discard request zeroes data. Therefore, we set ti->discard_zeroes_data_unsupported. Thin target discard support with this bug arrived in commit 104655fd (dm thin: support discards). Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Boaz Harrosh authored
commit 9909d45a upstream. [Bug since 3.2 Kernel] Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
Boaz Harrosh authored
commit 62b62ad8 upstream. Do to OOM situations the ore might fail to allocate all resources needed for IO of the full request. If some progress was possible it would proceed with a partial/short request, for the sake of forward progress. Since this crashes NFS-core and exofs is just fine without it just remove this contraption, and fail. TODO: Support real forward progress with some reserved allocations of resources, such as mem pools and/or bio_sets [Bug since 3.2 Kernel] CC: Benny Halevy <bhalevy@tonian.com> Signed-off-by:
-
Boaz Harrosh authored
commit 9ff19309 upstream. In RAID_5/6 We used to not permit an IO that it's end byte is not stripe_size aligned and spans more than one stripe. .i.e the caller must check if after submission the actual transferred bytes is shorter, and would need to resubmit a new IO with the remainder. Exofs supports this, and NFS was supposed to support this as well with it's short write mechanism. But late testing has exposed a CRASH when this is used with none-RPC layout-drivers. The change at NFS is deep and risky, in it's place the fix at ORE to lift the limitation is actually clean and simple. So here it is below. The principal here is that in the case of unaligned IO on both ends, beginning and end, we will send two read requests one like old code, before the calculation of the first stripe, and also a new site, before the calculation of the last stripe. If any "boundary" is aligned or the complete IO is within a single stripe. we do a single read like before. The code is clean and simple by splitting the old _read_4_write into 3 even parts: 1._read_4_write_first_stripe 2. _read_4_write_last_stripe 3. _read_4_write_execute And calling 1+3 at the same place as before. 2+3 before last stripe, and in the case of all in a single stripe then 1+2+3 is preformed additively. Why did I not think of it before. Well I had a strike of genius because I have stared at this code for 2 years, and did not find this simple solution, til today. Not that I did not try. This solution is much better for NFS than the previous supposedly solution because the short write was dealt with out-of-band after IO_done, which would cause for a seeky IO pattern where as in here we execute in order. At both solutions we do 2 separate reads, only here we do it within a single IO request. (And actually combine two writes into a single submission) NFS/exofs code need not change since the ORE API communicates the new shorter length on return, what will happen is that this case would not occur anymore. hurray!! [Stable this is an NFS bug since 3.2 Kernel should apply cleanly] Signed-off-by:
-
Artem Bityutskiy authored
commit c6727932 upstream. UBIFS has a feature called "empty space fix-up" which is a quirk to work-around limitations of dumb flasher programs. Namely, of those flashers that are unable to skip NAND pages full of 0xFFs while flashing, resulting in empty space at the end of half-filled eraseblocks to be unusable for UBIFS. This feature is relatively new (introduced in v3.0). The fix-up routine (fixup_free_space()) is executed only once at the very first mount if the superblock has the 'space_fixup' flag set (can be done with -F option of mkfs.ubifs). It basically reads all the UBIFS data and metadata and writes it back to the same LEB. The routine assumes the image is pristine and does not have anything in the journal. There was a bug in 'fixup_free_space()' where it fixed up the log incorrectly. All but one LEB of the log of a pristine file-system are empty. And one contains just a commit start node. And 'fixup_free_space()' just unmapped this LEB, which resulted in wiping the commit start node. As a result, some users were unable to mount the file-system next time with the following symptom: UBIFS error (pid 1): replay_log_leb: first log node at LEB 3:0 is not CS node UBIFS error (pid 1): replay_log_leb: log error detected while replaying the log at LEB 3:0 The root-cause of this bug was that 'fixup_free_space()' wrongly assumed that the beginning of empty space in the log head (c->lhead_offs) was known on mount. However, it is not the case - it was always 0. UBIFS does not store in it the master node and finds out by scanning the log on every mount. The fix is simple - just pass commit start node size instead of 0 to 'fixup_leb()'. Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Reported-by:
Iwo Mergler <Iwo.Mergler@netcommwireless.com> Tested-by:
James Nute <newten82@gmail.com> Signed-off-by:
-
David Daney authored
commit 7b1c0d26 upstream. Improper alignment can lead to unbootable systems and/or random crashes. [ralf@linux-mips.org: This is a lond standing bug since 6eb10bc9 (kernel.org) rsp. c422a10917f75fd19fa7fe070aaaa23e384dae6f (lmo) [MIPS: Clean up linker script using new linker script macros.] so dates back to 2.6.32.] Signed-off-by:
David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3881/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Jiri Kosina authored
commit 9ed32695 upstream. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Frank Kunz authored
commit 0e050923 upstream. The Sennheiser BTD500USB composit device requires the HID_QUIRK_NOGET flag to be set for working proper. Without the flag the device crashes during hid intialization. Signed-off-by:
Frank Kunz <xxxxxmichl@googlemail.com> Signed-off-by:
-
Daniel Nicoletti authored
commit 0c47935c upstream. Add USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, to the quirk list since it report wrong feature type and wrong percentage range. Signed-off-by:
Daniel Nicoletti <dantti12@gmail.com> Signed-off-by:
-
Aaditya Kumar authored
commit 1c7e7f6c upstream. Offlining memory may block forever, waiting for kswapd() to wake up because kswapd() does not check the event kthread->should_stop before sleeping. The proper pattern, from Documentation/memory-barriers.txt, is: --- waker --- event_indicated = 1; wake_up_process(event_daemon); --- sleeper --- for (;;) { set_current_state(TASK_UNINTERRUPTIBLE); if (event_indicated) break; schedule(); } set_current_state() may be wrapped by: prepare_to_wait(); In the kswapd() case, event_indicated is kthread->should_stop. === offlining memory (waker) === kswapd_stop() kthread_stop() kthread->should_stop = 1 wake_up_process() wait_for_completion() === kswapd_try_to_sleep (sleeper) === kswapd_try_to_sleep() prepare_to_wait() . . schedule() . . finish_wait() The schedule() needs to be protected by a test of kthread->should_stop, which is wrapped by kthread_should_stop(). Reproducer: Do heavy file I/O in background. Do a memory offline/online in a tight loop Signed-off-by:
Aaditya Kumar <aaditya.kumar@ap.sony.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Mel Gorman <mel@csn.ul.ie> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Al Viro authored
commit 331ae496 upstream. Caused, AFAICS, by mismerge in commit ff9cb1c4 ("Merge branch 'for_linus' into for_linus_merged") Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Mark Rustad authored
commit 3cc5d2a6 upstream. This patch fixes a crash seen when large reads have their exchange aborted by either timing out or being reset. Because the exchange abort results in the seq pointer being set to NULL, because the sequence is no longer valid, it must not be dereferenced. This patch changes the function ft_get_task_tag to return ~0 if it is unable to get the tag for this reason. Because the get_task_tag interface provides no means of returning an error, this seems like the best way to fix this issue at the moment. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Signed-off-by:
-
John Stultz authored
commit 6b1859db upstream. In commit 6b43ae8a, I introduced a bug that kept the STA_INS or STA_DEL bit from being cleared from time_status via adjtimex() without forcing STA_PLL first. Usually once the STA_INS is set, it isn't cleared until the leap second is applied, so its unlikely this affected anyone. However during testing I noticed it took some effort to cancel a leap second once STA_INS was set. Signed-off-by:
John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Link: http://lkml.kernel.org/r/1342156917-25092-2-git-send-email-john.stultz@linaro.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Roland Dreier authored
commit 1765fe5e upstream. When NUMBER OF LOGICAL BLOCKS is 0, WRITE SAME is supposed to write all the blocks from the specified LBA through the end of the device. However, dev->transport->get_blocks(dev) (perhaps confusingly) returns the last valid LBA rather than the number of blocks, so the correct number of blocks to write starting with lba is dev->transport->get_blocks(dev) - lba + 1 (nab: Backport roland's for-3.6 patch to for-3.5) Signed-off-by:
-
Roland Dreier authored
commit d35212f3 upstream. - instead of (PTR_ERR(file) < 0) just use IS_ERR(file) - return -EINVAL instead of EINVAL - all other error returns in target_scsi3_emulate_pr_out() use "goto out" -- get rid of the one remaining straight "return." Signed-off-by:
-
Jeff Layton authored
commit 3ae629d9 upstream. We currently rely on being able to kmap all of the pages in an async read or write request. If you're on a machine that has CONFIG_HIGHMEM set then that kmap space is limited, sometimes to as low as 512 slots. With 512 slots, we can only support up to a 2M r/wsize, and that's assuming that we can get our greedy little hands on all of them. There are other users however, so it's possible we'll end up stuck with a size that large. Since we can't handle a rsize or wsize larger than that currently, cap those options at the number of kmap slots we have. We could consider capping it even lower, but we currently default to a max of 1M. Might as well allow those luddites on 32 bit arches enough rope to hang themselves. A more robust fix would be to teach the send and receive routines how to contend with an array of pages so we don't need to marshal up a kvec array at all. That's a fairly significant overhaul though, so we'll need this limit in place until that's ready. Reported-by:
-
Jeff Layton authored
commit cd60042c upstream. When we get back a FIND_FIRST/NEXT result, we have some info about the dentry that we use to instantiate a new inode. We were ignoring and discarding that info when we had an existing dentry in the cache. Fix this by updating the inode in place when we find an existing dentry and the uniqueid is the same. Reported-and-Tested-by:
Andrew Bartlett <abartlet@samba.org> Reported-by:
Bill Robertson <bill_robertson@debortoli.com.au> Reported-by:
Dion Edwards <dion_edwards@debortoli.com.au> Signed-off-by:
-
NeilBrown authored
commit 58e94ae1 upstream. commit 4367af55 md/raid1: clear bad-block record when write succeeds. Added a 'reschedule_retry' call possibility at the end of end_sync_write, but didn't add matching code at the end of sync_request_write. So if the writes complete very quickly, or scheduling makes it seem that way, then we can miss rescheduling the request and the resync could hang. Also commit 73d5c38a md: avoid races when stopping resync. Fix a race condition in this same code in end_sync_write but didn't make the change in sync_request_write. This patch updates sync_request_write to fix both of those. Patch is suitable for 3.1 and later kernels. Reported-by:
Alexander Lyakas <alex.bolshoy@gmail.com> Original-version-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
commit a05b7ea0 upstream. md will refuse to stop an array if any other fd (or mounted fs) is using it. When any fs is unmounted of when the last open fd is closed all pending IO will be flushed (e.g. sync_blockdev call in __blkdev_put) so there will be no pending IO to worry about when the array is stopped. However in order to send the STOP_ARRAY ioctl to stop the array one must first get and open fd on the block device. If some fd is being used to write to the block device and it is closed after mdadm open the block device, but before mdadm issues the STOP_ARRAY ioctl, then there will be no last-close on the md device so __blkdev_put will not call sync_blockdev. If this happens, then IO can still be in-flight while md tears down the array and bad things can happen (use-after-free and subsequent havoc). So in the case where do_md_stop is being called from an open file descriptor, call sync_block after taking the mutex to ensure there will be no new openers. This is needed when setting a read-write device to read-only too. Reported-by:
majianpeng <majianpeng@gmail.com> Signed-off-by:
-
- 19 Jul, 2012 15 commits
-
-
Greg Kroah-Hartman authored
-
Samuel Ortiz authored
commit dbd4fcaf upstream. The netlink commands and attributes, along with the socket structure definitions need to be exported. Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Thomas Gleixner authored
This is a backport of 3e997130 The leap second rework unearthed another issue of inconsistent data. On timekeeping_resume() the timekeeper data is updated, but nothing calls timekeeping_update(), so now the update code in the timer interrupt sees stale values. This has been the case before those changes, but then the timer interrupt was using stale data as well so this went unnoticed for quite some time. Add the missing update call, so all the data is consistent everywhere. Reported-by:
Andreas Schwab <schwab@linux-m68k.org> Reported-and-tested-by:
"Rafael J. Wysocki" <rjw@sisk.pl> Reported-and-tested-by:
Martin Steigerwald <Martin@lichtvoll.de> Cc: John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>, Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by:
-
John Stultz authored
This is a backport of 5baefd6d The update of the hrtimer base offsets on all cpus cannot be made atomically from the timekeeper.lock held and interrupt disabled region as smp function calls are not allowed there. clock_was_set(), which enforces the update on all cpus, is called either from preemptible process context in case of do_settimeofday() or from the softirq context when the offset modification happened in the timer interrupt itself due to a leap second. In both cases there is a race window for an hrtimer interrupt between dropping timekeeper lock, enabling interrupts and clock_was_set() issuing the updates. Any interrupt which arrives in that window will see the new time but operate on stale offsets. So we need to make sure that an hrtimer interrupt always sees a consistent state of time and offsets. ktime_get_update_offsets() allows us to get the current monotonic time and update the per cpu hrtimer base offsets from hrtimer_interrupt() to capture a consistent state of monotonic time and the offsets. The function replaces the existing ktime_get() calls in hrtimer_interrupt(). The overhead of the new function vs. ktime_get() is minimal as it just adds two store operations. This ensures that any changes to realtime or boottime offsets are noticed and stored into the per-cpu hrtimer base structures, prior to any hrtimer expiration and guarantees that timers are not expired early. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Prarit Bhargava <prarit@redhat.com> Link: http://lkml.kernel.org/r/1341960205-56738-8-git-send-email-johnstul@us.ibm.comSigned-off-by:
-
Thomas Gleixner authored
This is a backport of f6c06abf To finally fix the infamous leap second issue and other race windows caused by functions which change the offsets between the various time bases (CLOCK_MONOTONIC, CLOCK_REALTIME and CLOCK_BOOTTIME) we need a function which atomically gets the current monotonic time and updates the offsets of CLOCK_REALTIME and CLOCK_BOOTTIME with minimalistic overhead. The previous patch which provides ktime_t offsets allows us to make this function almost as cheap as ktime_get() which is going to be replaced in hrtimer_interrupt(). Signed-off-by:
-
Thomas Gleixner authored
This is a backport of 196951e9 We need to update the base offsets from this code and we need to do that under base->lock. Move the lock held region around the ktime_get() calls. The ktime_get() calls are going to be replaced with a function which gets the time and the offsets atomically. Signed-off-by:
-
Thomas Gleixner authored
This is a backport of 5b9fe759 We need to update the hrtimer clock offsets from the hrtimer interrupt context. To avoid conversions from timespec to ktime_t maintain a ktime_t based representation of those offsets in the timekeeper. This puts the conversion overhead into the code which updates the underlying offsets and provides fast accessible values in the hrtimer interrupt. Signed-off-by:
-
John Stultz authored
This is a backport of 4873fa07 The timekeeping code misses an update of the hrtimer subsystem after a leap second happened. Due to that timers based on CLOCK_REALTIME are either expiring a second early or late depending on whether a leap second has been inserted or deleted until an operation is initiated which causes that update. Unless the update happens by some other means this discrepancy between the timekeeping and the hrtimer data stays forever and timers are expired either early or late. The reported immediate workaround - $ data -s "`date`" - is causing a call to clock_was_set() which updates the hrtimer data structures. See: http://www.sheeri.com/content/mysql-and-leap-second-high-cpu-and-fix Add the missing clock_was_set() call to update_wall_time() in case of a leap second event. The actual update is deferred to softirq context as the necessary smp function call cannot be invoked from hard interrupt context. Signed-off-by:
Jan Engelhardt <jengelh@inai.de> Reviewed-by:
-
John Stultz authored
This is a backport of f55a6faa clock_was_set() cannot be called from hard interrupt context because it calls on_each_cpu(). For fixing the widely reported leap seconds issue it is necessary to call it from hard interrupt context, i.e. the timer tick code, which does the timekeeping updates. Provide a new function which denotes it in the hrtimer cpu base structure of the cpu on which it is called and raise the hrtimer softirq. We then execute the clock_was_set() notificiation from softirq context in run_hrtimer_softirq(). The hrtimer softirq is rarely used, so polling the flag there is not a performance issue. [ tglx: Made it depend on CONFIG_HIGH_RES_TIMERS. We really should get rid of all this ifdeffery ASAP ] Signed-off-by:
-
Michal Kazior authored
commit f8cdddb8 upstream. Don't validate interface combinations on a stopped interface. Otherwise we might end up being able to create a new interface with a certain type, but won't be able to change an existing interface into that type. This also skips some other functions when interface is stopped and changing interface type. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [Fixes regression introduced by cherry pick of 463454b5] Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Pawel Moll authored
commit bf47b4fd upstream. clk_change_rate() is accessing parent's rate without checking if the parent exists at all. In case of root clocks this will cause NULL pointer dereference. This patch follows what clk_calc_new_rates() does in such situation. Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Mike Turquette <mturquette@linaro.org> Signed-off-by:
-
Ryan Bourgeois authored
commit b2e6ad7d upstream. Add support for the 15'' MacBook Pro Retina. The keyboard is the same as recent models. The patch needs to be synchronized with the bcm5974 patch for the trackpad - as usual. Patch originally written by clipcarl (forums.opensuse.org). [rydberg@euromail.se: Amended mouse ignore lines] Signed-off-by:
Ryan Bourgeois <bluedragonx@gmail.com> Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Yuri Khan authored
commit e76b8ee2 upstream. I couldn't find the vendor ID in any of the online databases, but this mat has a Pump It Up logo on the top side of the controller compartment, and a disclaimer stating that Andamiro will not be liable on the bottom. Signed-off-by:
Yuri Khan <yurivkhan@gmail.com> Signed-off-by:
-
Ilia Katsnelson authored
commit cc71a7e8 upstream. Signed-off-by:
Ilia Katsnelson <k0009000@gmail.com> Signed-off-by:
-
Yuri Khan authored
commit 3ffb62cb upstream. The device should be handled by xpad driver instead of generic HID driver. Signed-off-by:
-
