- 05 Nov, 2013 5 commits
-
-
Takashi Iwai authored
Check whether all vmaster slaves have the same dB steps. Otherwise the behavior would become inconsistent. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Check the TLV db scale result before actually dividing in vmaster slave init code. Also mask TLV_DB_SCALE_MUTE bit so that the right value is obtained even if this bit is set by the codec driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
David Henningsson authored
In case the channel count of the input terminal is not the same as the channel count of the streaming descriptor, the channel config of the input terminal can not be trusted. Instead fall back to a default (guessed) channel map. This was found on a Logitech USB Headset. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
David Henningsson authored
The channel config from the streaming descriptor is probably a better indicator of the channel map than the input terminal. Use the input terminal's channel map as fallback only. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
David Henningsson authored
If wChannelconfig is given for some formats but not others, userspace might not be able to set the channel map. This is RFC because I'm not sure what the best behaviour is - to guess the channel map from the given number of channels (it's quite likely that one channel is MONO and two channels is FL FR), or just to supply UNKNOWN for all channels. But the complete lack of channel map for a format leads userspace to believe that the format is not available at all. Or am I misunderstanding how this should be used? Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 04 Nov, 2013 24 commits
-
-
Takashi Iwai authored
BIOS on Acer TravelMate 6293 doesn't set up the SPDIF output pin correctly as default, so enable it via a fixup entry. Reported-and-tested-by: Hagen Heiduck <heiduck.suse@fmail.postpro.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
James Ralston authored
This patch adds the HD Audio Device IDs for the Intel Wildcat Point-LP PCH. Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Mengdong Lin authored
The function name not_share_unassigned_cvt() is opposite to what it does. This patch renames it to intel_not_share_assigned_cvt(), and addes comments to explain why some Intel display codecs need this workaround. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Anssi Hannula authored
NVIDIA HDMI codecs do not seem to follow the Audio Sample Packet (ASP) channel mapping (as set by verb F32h per HDA specification 7.3.3.41) when playing back 2-channel audio (CEA CA 0x00). Basically this means that specifying swapped channels for stereo audio (FR,FL) does not take effect, and e.g. this command plays back on the wrong channel: speaker-test -c2 -Dhdmi:CARD=NVidia,DEV=0 -m FR,FL -s1 Multichannel audio is not affected. This issue has been confirmed to exist on codec 0x10de0015 by me and on 0x10de0040 by Juho Teperi. Disable 2ch FL/FR channel swapping on all NVIDIA HDMI codecs that use the standard HDA channel mapping system. Since this is a very minor functionality loss, we err on the side of disabling it for newer codecs as well until any future testing confirms that this issue has been fixed. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Helped-by: Juho Teperi <juho.teperi@iki.fi> Cc: Aaron Plattner <aplattner@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Takashi Iwai authored
Merge tag 'asoc-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Final updates for v3.13 A few final updates for v3.13, all driver updates apart from some DPCM and Coverity fixes which should have minor impact on practical systems.
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
- 01 Nov, 2013 9 commits
-
-
Richard Fitzgerald authored
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Richard Fitzgerald authored
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Dimitris Papastamos authored
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Dimitris Papastamos authored
Do it in a similar fashion as we do for ADSP2. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Dimitris Papastamos authored
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Dimitris Papastamos authored
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Dimitris Papastamos authored
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Mengdong Lin authored
For Valleyview display codec, if an unused pin chooses an assgined converter selected by a used pin, playback on the unused pin can also give sound to the output device of the used pin. It's because data flows from the same convertor to the display port of the used pin. This issue is same as Haswell. So this patch avoids using assinged convertors for unused pins. The related function haswell_config_cvts() is renamed for code reuse. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Phil Edworthy authored
If you record the sound during playback, the playback sound becomes silent. Modify so that the codec driver does not clear SG_SL1::DACL bit which is controlled under widget Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
- 31 Oct, 2013 2 commits
-
-
Russell King - ARM Linux authored
Avoid oopsing if there is no backend stream associated with a front end stream. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Mark Brown authored
Ensure that we always check that an ops structure is present before we try to use it, improving the robustness of the system. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
-