- 12 Dec, 2011 23 commits
-
-
Sebastian Andrzej Siewior authored
A few inits like the scale value or the removal of the DISSCRAMBLE is done in the gadget code however it touches a general register. Move this piece to the core.c file since it is likely to be requied by both, parts of the core (device and host). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Sebastian Andrzej Siewior authored
There are two where need to set operational mode: - during initialization while we decide to run in host,device or DRD mode - at runtime via the debugfs interface. This patch provides a new function which sets the operational mode and moves its initialiation to the mode switch instead in the gadget code itself. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Sebastian Andrzej Siewior authored
In "usb: dwc3: remove special status request handling in ep0" I simplied a few things and used the generic API for the status transfers. The bug I introcuded here is that we queue now requests to dep[1] but we don't clear that list in the stall+start case. Actually we don't need to use dep[1] at all. We only did in the past to talk to the correct endpoint (i.e. in or out). This is now take care of in a diffent place within the ep0 code. So we could queue the in transfers to dep[0] and don't use dep[1] at all. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Sebastian Andrzej Siewior authored
The first access was correct, the second was wrong. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
hardware will tell us how many event buffers we need to support, so let's allocate the array dynamically too. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
if we ever have an omap with multiple instances of the DWC3 IP, we need unique names for them. In order to achieve that, let's use the dwc3_get/put_device_id() calls to give us an unique device identifier. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
if we want to support situations where we have both SoC and PCIe versions of the IP on the same platform, we need to have sequential numbers between them, otherwise we will still have name collisions. Because of that, we need to move dwc3_get/put_device_id() to core.c and export that symbol to be used by glue layers. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Sebastian Andrzej Siewior authored
The GetStatus (STD)-request is handled the driver and uses a tiny hack to send the two bytes long answer. This patch removes the custom hack uses the normal usb_ep_queue() for that. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Sebastian Andrzej Siewior authored
If we stall and restart we have to reset also this flag to 0 as there is nothing pending anymore. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Sebastian Andrzej Siewior authored
None of these are required atm. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Sebastian Andrzej Siewior authored
The read and write operation is atomic and we need no locking around this operations. What we need however is a lock that is held which ensures that the content of the DWC3_GCTL has not been changed. With this, the conten may have been change changed after the first but before our write back. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Sebastian Andrzej Siewior authored
We can have three modules here: dwc3.ko, dwc3-omap.ko and dwc3-pci.ko. The later have already ids-aliases for probing and is fine. The omap module has alias for DT but lacks alias for the "native" platform_device. Maybe we should get rid of it and stick to the DT name? Both glue modules create a new device for which the dwc3.ko module is responsible and that one lacks the platform alias. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
Sometimes the host might be trying to initiate Data or Status phase for an older Control transfer. In such situations we must STALL that transfer and restart the state machine rather than letting such situation go through the wire. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
This makes testing a lot easier when trying to switch between host and device modes. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
I have talked to USB-IF about USB30CV issuing SetAddres() with a device on Configured state and they have agreed on changing USB30CV not to do so. Adding back the STALL reply in such case and while at that, also add a debugging message for an address which is too large. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
now that we have host support, we must depend on both sides. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
host prototypes are there, let's move gadget's closer. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
We can decide in runtime if that will be used or not. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
The Designware USB3 IP can be configured with an internal xHCI. If we're running on such a version, let's start the xHCI stack. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
There's no need to add driver_data for something we can fetch from HW. This also makes our id_table unnecessary - at least for now -, so we also remove it on the same patch. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
This will allow us to only allocate memory when we actually need. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
this is mainly for testing. In order to be able to test if we're enumerating correctly on all speeds, let that be controlled by a module parameter. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
when we remove the gadget driver, it will already do that for us. Signed-off-by: Felipe Balbi <balbi@ti.com>
-
- 09 Dec, 2011 17 commits
-
-
Linus Torvalds authored
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
* git://git.samba.org/sfrench/cifs-2.6: cifs: check for NULL last_entry before calling cifs_save_resume_key cifs: attempt to freeze while looping on a receive attempt cifs: Fix sparse warning when calling cifs_strtoUCS CIFS: Add descriptions to the brlock cache functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Calling __pa() with an ioremap()ed address is invalid x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked x86/intel_mid: Kconfig select fix x86/intel_mid: Fix the Kconfig for MID selection
-
git://git.pengutronix.de/git/wsa/linux-2.6Linus Torvalds authored
* 'spi/for-3.2' of git://git.pengutronix.de/git/wsa/linux-2.6: spi/gpio: fix section mismatch warning spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build spi/nuc900: Include linux/module.h spi/ath79: fix compile error due to missing include
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md: raid5 crash during degradation md/raid5: never wait for bad-block acks on failed device. md: ensure new badblocks are handled promptly. md: bad blocks shouldn't cause a Blocked status on a Faulty device. md: take a reference to mddev during sysfs access. md: refine interpretation of "hold_active == UNTIL_IOCTL". md/lock: ensure updates to page_attrs are properly locked.
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: use new generic {enable,disable}_percpu_irq() routines drivers/net/ethernet/tile: use skb_frag_page() API asm-generic/unistd.h: support new process_vm_{readv,write} syscalls arch/tile: fix double-free bug in homecache_free_pages() arch/tile: add a few #includes and an EXPORT to catch up with kernel changes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: MAINTAINERS: Update amd-iommu F: patterns iommu/amd: Fix typo in kernel-parameters.txt iommu/msm: Fix compile error in mach-msm/devices-iommu.c Fix comparison using wrong pointer variable in dma debug code
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix lost speaker volume controls ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins ALSA: hda/realtek - Don't create extra controls with channel suffix ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs ASoC: Provide a more complete DMA driver stub ASoC: Remove references to corgi and spitz from machine driver document ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700 ASoC: uda1380: Return proper error in uda1380_modinit failure path ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C ASoC: Mark WM8994 ADC muxes as virtual ALSA: hda/realtek - Fix Oops in alc_mux_select() ALSA: sis7019 - give slow codecs more time to reset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Do no try to schedule task events if there are none lockdep, kmemcheck: Annotate ->lock in lockdep_init_map() perf header: Use event_name() to get an event name perf stat: Failure with "Operation not supported"
-
Mandeep Singh Baines authored
In order to safely dereference current->real_parent inside an rcu_read_lock, we need an rcu_dereference. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Modify initialization of PCIe capability registers in Tsi721 mport driver: - change Completion Timeout value to avoid unexpected data transfer aborts during intensive traffic. - replace hardcoded offset of PCIe capability block by making it use the common function. This patch is applicable to kernel versions starting from 3.2-rc1. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Bug fix for Tsi721 RapidIO mport driver: Tsi721 supports four RapidIO mailboxes (MBOX0 - MBOX3) as defined by RapidIO specification. Mailbox resources has to be properly reported to allow use of all available mailboxes (initial version reports only MBOX0). This patch is applicable to kernel versions staring from 3.2-rc1. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Replace the pair dma_alloc_coherent()+memset() with the new dma_zalloc_coherent() added by Andrew Morton for kernel version 3.2 Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
Since commit a25cac51 ("proc: Consider NO_HZ when printing idle and iowait times") we are reporting idle/io_wait time also while a CPU is tickless. We rely on get_{idle,iowait}_time functions to retrieve proper data. These functions, however, use usecs_to_cputime to translate micro seconds time to cputime64_t. This is just an alias to usecs_to_jiffies which reduces the data type from u64 to unsigned int and also checks whether the given parameter overflows jiffies_to_usecs(MAX_JIFFY_OFFSET) and returns MAX_JIFFY_OFFSET in that case. When we overflow depends on CONFIG_HZ but especially for CONFIG_HZ_300 it is quite low (1431649781) so we are getting MAX_JIFFY_OFFSET for >3000s! until we overflow unsigned int. Just for reference CONFIG_HZ_100 has an overflow window around 20s, CONFIG_HZ_250 ~8s and CONFIG_HZ_1000 ~2s. This results in a bug when people saw [h]top going mad reporting 100% CPU usage even though there was basically no CPU load. The reason was simply that /proc/stat stopped reporting idle/io_wait changes (and reported MAX_JIFFY_OFFSET) and so the only change happening was for user system time. Let's use nsecs_to_jiffies64 instead which doesn't reduce the precision to 32b type and it is much more appropriate for cumulative time values (unlike usecs_to_jiffies which intended for timeout calculations). Signed-off-by: Michal Hocko <mhocko@suse.cz> Tested-by: Artem S. Tashkinov <t.artem@mailcity.com> Cc: Dave Jones <davej@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
Commit f5252e00 ("mm: avoid null pointer access in vm_struct via /proc/vmallocinfo") adds newly allocated vm_structs to the vmlist after it is fully initialised. Unfortunately, it did not check that __vmalloc_area_node() successfully populated the area. In the event of allocation failure, the vmalloc area is freed but the pointer to freed memory is inserted into the vmlist leading to a a crash later in get_vmalloc_info(). This patch adds a check for ____vmalloc_area_node() failure within __vmalloc_node_range. It does not use "goto fail" as in the previous error path as a warning was already displayed by __vmalloc_area_node() before it called vfree in its failure path. Credit goes to Luciano Chavez for doing all the real work of identifying exactly where the problem was. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Luciano Chavez <lnx1138@linux.vnet.ibm.com> Tested-by: Luciano Chavez <lnx1138@linux.vnet.ibm.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [3.1.x+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
setup_zone_migrate_reserve() expects that zone->start_pfn starts at pageblock_nr_pages aligned pfn otherwise we could access beyond an existing memblock resulting in the following panic if CONFIG_HOLES_IN_ZONE is not configured and we do not check pfn_valid: IP: [<c02d331d>] setup_zone_migrate_reserve+0xcd/0x180 *pdpt = 0000000000000000 *pde = f000ff53f000ff53 Oops: 0000 [#1] SMP Pid: 1, comm: swapper Not tainted 3.0.7-0.7-pae #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform EIP: 0060:[<c02d331d>] EFLAGS: 00010006 CPU: 0 EIP is at setup_zone_migrate_reserve+0xcd/0x180 EAX: 000c0000 EBX: f5801fc0 ECX: 000c0000 EDX: 00000000 ESI: 000c01fe EDI: 000c01fe EBP: 00140000 ESP: f2475f58 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=f2474000 task=f2472cd0 task.ti=f2474000) Call Trace: [<c02d389c>] __setup_per_zone_wmarks+0xec/0x160 [<c02d3a1f>] setup_per_zone_wmarks+0xf/0x20 [<c08a771c>] init_per_zone_wmark_min+0x27/0x86 [<c020111b>] do_one_initcall+0x2b/0x160 [<c086639d>] kernel_init+0xbe/0x157 [<c05cae26>] kernel_thread_helper+0x6/0xd Code: a5 39 f5 89 f7 0f 46 fd 39 cf 76 40 8b 03 f6 c4 08 74 32 eb 91 90 89 c8 c1 e8 0e 0f be 80 80 2f 86 c0 8b 14 85 60 2f 86 c0 89 c8 <2b> 82 b4 12 00 00 c1 e0 05 03 82 ac 12 00 00 8b 00 f6 c4 08 0f EIP: [<c02d331d>] setup_zone_migrate_reserve+0xcd/0x180 SS:ESP 0068:f2475f58 CR2: 00000000000012b4 We crashed in pageblock_is_reserved() when accessing pfn 0xc0000 because highstart_pfn = 0x36ffe. The issue was introduced in 3.0-rc1 by 6d3163ce ("mm: check if any page in a pageblock is reserved before marking it MIGRATE_RESERVE"). Make sure that start_pfn is always aligned to pageblock_nr_pages to ensure that pfn_valid s always called at the start of each pageblock. Architectures with holes in pageblocks will be correctly handled by pfn_valid_within in pageblock_is_reserved. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Dang Bo <bdang@vmware.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Arve Hjnnevg <arve@android.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> [3.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hillf Danton authored
Avoid unlocking and unlocked page if we failed to lock it. Signed-off-by: Hillf Danton <dhillf@gmail.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-