The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231212-ux500-dts-v1-1-5a31b6742d85@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v6.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt

Devicetree changes for omaps

- A series of patches to reorganize Motorola Mapphone related files to add
  support for tablets as the peripherals are different compared to the
  phones

- Apply am57xx-idk overlays to base dtbs

- Extcon update to use id-gpios and vbus-gpios

- Update omap4-epson-embt2ws to enable wlan clock and bluetooth-gnss

- Update for logicpd-torpedo to use bluetooth-gnss node name

* tag 'omap-for-v6.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap4-embt2ws: Add Bluetooth
  ARM: dts: omap: logicpd-torpedo: do not disguise GNSS device
  ARM: dts: omap4-embt2ws: enable 32K clock on WLAN
  ARM: dts: ti/omap: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
  arm: dts: omap: Apply am57xx-idk overlays to base dtbs
  ARM: dts: motorola-mapphone: Add basic support for mz609 and mz617
  ARM: dts: motorola-mapphone: Move handset devices to a common file
  ARM: dts: motorola-mapphone: Move LCD to common file for xt875 and xt894
  dt-bindings: omap: Add Motorola mapphone mz609 and mz617 tablets

Link: https://lore.kernel.org/r/pull-1702037869-295608@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

ARM64: DT: HiSilicon ARM64 DT updates for v6.8

- Merge the hi3620-clock binding into hisilicon,sysctrl
- Clean up the hikey970 PMIC dtsi

* tag 'hisi-arm64-dt-for-6.8' of https://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: hikey970-pmic: clean up SPMI node
  arm64: dts: hisilicon: hikey970-pmic: fix regulator cells properties
  dt-bindings: hisilicon: Merge hi3620-clock into hisilicon,sysctrl binding

Link: https://lore.kernel.org/r/6572C4C8.6050401@hisilicon.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Clean up the SPMI node by dropping the redundant status property and
moving the 'reg' property after 'compatible' for consistency.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

The Hi6421 PMIC regulator child nodes do not have unit addresses so drop
the incorrect '#address-cells' and '#size-cells' properties.

Fixes: 6219b20e ("arm64: dts: hisilicon: Add support for Hikey 970 PMIC")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

The hi3620-clock binding is simple and always a child of the
"hisilicon,sysctrl" node, so just add it into the hisilicon,sysctrl
binding and drop the old txt binding.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Merge tag 'renesas-dts-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt

Renesas DTS updates for v6.8

  - Add FLASH support for the Renesas Marzen and Blanche development
    boards,
  - Add 4-bit TX support for the QSPI FLASHes on the RZ/G2L, RZ/G2LC,
    and RZ/V2L SMARC SoMs,
  - Add SDHI support for the RZ/G3S SMARC development kit,
  - Add LCD support for the Atmark Techno Armadillo-800-EVA development
    board, which requires switching from the legacy frame buffer device
    driver to the DRM driver,
  - Miscellaneous fixes and improvements.

* tag 'renesas-dts-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: dts: renesas: r9a06g032: Add missing space in compatible
  arm64: dts: renesas: r9a09g011: Add missing space in compatible
  ARM: dts: renesas: armadillo800eva: Add LCD panel
  ARM: dts: renesas: r8a7740: Add LCDC nodes
  ARM: shmobile: defconfig: Switch to DRM_SHMOBILE
  arm64: dts: renesas: draak: Move HDMI bus properties to correct node
  arm64: dts: renesas: draak: Make HDMI the default video input
  arm64: dts: renesas: rzg3s-smarc: Enable SDHI1
  arm64: dts: renesas: rzg3s-smarc-som: Enable SDHI2
  arm64: dts: renesas: rzg2lc-smarc-som: Enable 4-bit tx support
  arm64: dts: renesas: rzg2l-smarc-som: Enable 4-bit tx support
  ARM: dts: renesas: marzen: Rename keyboard nodes
  ARM: dts: renesas: iwg22d-sodimm: Fix stmpe node names
  arm64: dts: renesas: Add missing ADV751[13] power supply properties
  ARM: dts: renesas: Add missing ADV751[13] power supply properties
  ARM: dts: renesas: rcar-gen2: Fix I2C bus demux node names
  riscv: dts: renesas: Convert isa detection to new properties
  ARM: dts: renesas: blanche: Add FLASH node
  ARM: dts: renesas: marzen: Add FLASH node

Link: https://lore.kernel.org/r/cover.1701433489.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Since the required clock is now available, add bluetooth.

Note: Firmware (bts file) from device vendor reroutes tx for some time
during initialisation and later put it back, producing timeouts in
bluetooth initialisation but ignoring that command leads to proper
initialisation.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20231004070309.2408745-1-andreas@kemnade.info>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

https://support.logicpd.com/DesktopModules/Bring2mind/DMX/Download.aspx?portalid=0&EntryId=649
clearly specifies the availability of GPS, so let's not disguise it
and name the node accordingly.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20231127200430.143231-1-andreas@kemnade.info>
Acked-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

WLAN did only work if clock was left enabled by the original system,
so make it fully enable the needed resources itself.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20230916100515.1650336-6-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Use id-gpios and vbus-gpios instead.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Message-ID: <20230724103914.1779027-3-alexander.stein@ew.tq-group.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

DT overlays in tree need to be applied to a base DTB to validate they
apply, to run schema checks on them, and to catch any errors at compile
time.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-ID: <20231010211925.1629653-1-robh@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The Motorola mapphone tablets are similar to the mapphone phones, but with
different display and without some phone related peripherals.

Let's add a new motorola-mapphone-mz607-mz617.dtsi and basic files for
xyboard mz609 and mz617. All the tablets from mz607 to mz617 are quite
similar so let's use motorola-mapphone-mz607-mz617.dtsi naming for the
common file.

Note that the tc358765 lcd bridge needs driver changes before it can be
added.
Signed-off-by: Tony Lindgren <tony@atomide.com>

The mapphone tablets do not have same peripherals as the mapphone
handsets. Let's move the handset specific devices into a common
motorola-mapphone-handset.dtsi file.
Signed-off-by: Tony Lindgren <tony@atomide.com>

The LCD regulator and backlight are specific only to droid bionic xt875
and droid4 xt894. On droid razr xt910 and xt912, the LCD regulator and
backlight are different. The LCD and backlight are also different on the
the mz609 tablets.

Let's add a common motorola-mapphone-xt8xx.dtsi to make it easy to add
support for xt910 and xt912 and the mz609 to mz617 tablets.

While at it, let's also move aliases to the board specific dts files where
they belong. And let's move the omap4-droid4-xt894.dts compatible to the
top.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Let's add compatibles for some xyboard tablets, these are similar to
the mapphone devices already listed but with different peripherals.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add missing space in compatible property and align style with rest of
the file.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231125233327.238575-1-niklas.soderlund+renesas@ragnatech.seSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add missing space in compatible property and align style with rest of
the file.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231125233242.237660-1-niklas.soderlund+renesas@ragnatech.seSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Describe the 5" WVGA TFT LCD panel on the Armadillo-800-EVA development
board, and enable the LCD controller that drives it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/278339322dcaaedc0d68fc67f1f1272d880084d7.1700669207.git.geert+renesas@glider.be

Add device nodes for the two LCD Controllers (LCDC) on the R-Mobile A1
SoC, and for the two optional external LCDL clock inputs.

Note that the HDMI clock for LCDC1 is not added, as this clock is not
yet supported.

Based on a patch by Laurent Pinchart adding the first LCDC device node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/12dcec10e6fb3b55c39f6221349d35d6d6f17a5d.1700669207.git.geert+renesas@glider.be

Now the DRM driver for the SH-Mobile LCD Controller supports DT, replace
the legacy frame buffer device driver by the DRM driver.

Disable frame buffer device drivers, as this was the last frame buffer
device driver for Renesas ARM systems.
Enable CONFIG_DRM_FBDEV_EMULATION and CONFIG_FB_DEVICE, as these are no
longer auto-enabled since commit bb6c4507 ("drm: fix up fbdev
Kconfig defaults").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3d17d8418ddabeb84ff5fa1cdd16439ddc84286f.1700669207.git.geert+renesas@glider.be

The bus properties for HDMI capture are defined on the incorrect node
for the VIN driver to be able to consume them. They are described on the
HDMI video source but they should be described on the VIN capture node,
move them.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231022181910.898040-3-niklas.soderlund+renesas@ragnatech.seSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Most Gen3 R-Car devices have HDMI as the default video input source,
align Draak with them and make HDMI the default.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231022181910.898040-2-niklas.soderlund+renesas@ragnatech.seSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Pull tracing fixes from Steven Rostedt::
 "Eventfs fixes:

   - With the usage of simple_recursive_remove() recommended by Al Viro,
     the code should not be calling "d_invalidate()" itself. Doing so is
     causing crashes. The code was calling d_invalidate() on the race of
     trying to look up a file while the parent was being deleted. This
     was detected, and the added dentry was having d_invalidate() called
     on it, but the deletion of the directory was also calling
     d_invalidate() on that same dentry.

   - A fix to not free the eventfs_inode (ei) until the last dput() was
     called on its ei->dentry made the ei->dentry exist even after it
     was marked for free by setting the ei->is_freed. But code elsewhere
     still was checking if ei->dentry was NULL if ei->is_freed is set
     and would trigger WARN_ON if that was the case. That's no longer
     true and there should not be any warnings when it is true.

   - Use GFP_NOFS for allocations done under eventfs_mutex. The
     eventfs_mutex can be taken on file system reclaim, make sure that
     allocations done under that mutex do not trigger file system
     reclaim.

   - Clean up code by moving the taking of inode_lock out of the helper
     functions and into where they are needed, and not use the parameter
     to know to take it or not. It must always be held but some callers
     of the helper function have it taken when they were called.

   - Warn if the inode_lock is not held in the helper functions.

   - Warn if eventfs_start_creating() is called without a parent. As
     eventfs is underneath tracefs, all files created will have a parent
     (the top one will have a tracefs parent).

  Tracing update:

   - Add Mathieu Desnoyers as an official reviewer of the tracing subsystem"

* tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer
  eventfs: Make sure that parent->d_inode is locked in creating files/dirs
  eventfs: Do not allow NULL parent to eventfs_start_creating()
  eventfs: Move taking of inode_lock into dcache_dir_open_wrapper()
  eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held
  eventfs: Do not invalidate dentry in create_file/dir_dentry()
  eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL

Pull parisc architecture fixes from Helge Deller:
 "This patchset fixes and enforces correct section alignments for the
  ex_table, altinstructions, parisc_unwind, jump_table and bug_table
  which are created by inline assembly.

  Due to not being correctly aligned at link & load time they can
  trigger unnecessarily the kernel unaligned exception handler at
  runtime. While at it, I switched the bug table to use relative
  addresses which reduces the size of the table by half on 64-bit.

  We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs
  from HP-UX, which now trigger build-issues with glibc. We can simply
  remove them.

  Most of the patches are tagged for stable kernel series.

  Summary:

   - Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc
     build issues

   - Fix section alignments for ex_table, altinstructions, parisc unwind
     table, jump_table and bug_table

   - Reduce size of bug_table on 64-bit kernel by using relative
     pointers"

* tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Reduce size of the bug_table on 64-bit kernel by half
  parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
  parisc: Use natural CPU alignment for bug_table
  parisc: Ensure 32-bit alignment on parisc unwind section
  parisc: Mark lock_aligned variables 16-byte aligned on SMP
  parisc: Mark jump_table naturally aligned
  parisc: Mark altinstructions read-only and 32-bit aligned
  parisc: Mark ex_table entries 32-bit aligned in uaccess.h
  parisc: Mark ex_table entries 32-bit aligned in assembly.h

Pull x86 microcode fixes from Ingo Molnar:
 "Fix/enhance x86 microcode version reporting: fix the bootup log spam,
  and remove the driver version announcement to avoid version confusion
  when distros backport fixes"

* tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Rework early revisions reporting
  x86/microcode: Remove the driver announcement and version

Pull x86 perf event fix from Ingo Molnar:
 "Fix a bug in the Intel hybrid CPUs hardware-capabilities enumeration
  code resulting in non-working events on those platforms"

* tag 'perf-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Correct incorrect 'or' operation for PMU capabilities

Pull locking fix from Ingo Molnar:
 "Fix lockdep block chain corruption resulting in KASAN warnings"

* tag 'locking-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Fix block chain corruption

Pull smb client fixes from Steve French:

 - use after free fix in releasing multichannel interfaces

 - fixes for special file types (report char, block, FIFOs properly when
   created e.g. by NFS to Windows)

 - fixes for reporting various special file types and symlinks properly
   when using SMB1

* tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: introduce cifs_sfu_make_node()
  smb: client: set correct file type from NFS reparse points
  smb: client: introduce ->parse_reparse_point()
  smb: client: implement ->query_reparse_point() for SMB1
  cifs: fix use after free for iface while disabling secondary channels

Pull USB / PHY / Thunderbolt fixes from Greg KH:
 "Here are a number of reverts, fixes, and new device ids for 6.7-rc3
  for the USB, PHY, and Thunderbolt driver subsystems. Include in here
  are:

   - reverts of some PHY drivers that went into 6.7-rc1 that shouldn't
     have been merged yet, the author is reworking them based on review
     comments as they were using older apis that shouldn't be used
     anymore for newer drivers

   - small thunderbolt driver fixes for reported issues

   - USB driver fixes for a variety of small issues in dwc3, typec,
     xhci, and other smaller drivers.

   - new device ids for usb-serial and onboard_usb_hub drivers.

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  USB: serial: option: add Luat Air72*U series products
  USB: dwc3: qcom: fix ACPI platform device leak
  USB: dwc3: qcom: fix software node leak on probe errors
  USB: dwc3: qcom: fix resource leaks on probe deferral
  USB: dwc3: qcom: simplify wakeup interrupt setup
  USB: dwc3: qcom: fix wakeup after probe deferral
  dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
  usb: misc: onboard-hub: add support for Microchip USB5744
  dt-bindings: usb: microchip,usb5744: Add second supply
  usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
  USB: serial: option: add Fibocom L7xx modules
  USB: xhci-plat: fix legacy PHY double init
  usb: typec: tipd: Supply also I2C driver data
  usb: xhci-mtk: fix in-ep's start-split check failure
  usb: dwc3: set the dma max_seg_size
  usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
  usb: dwc3: add missing of_node_put and platform_device_put
  USB: dwc2: write HCINT with INTMASK applied
  usb: misc: ljca: Drop _ADR support to get ljca children devices
  usb: cdnsp: Fix deadlock issue during using NCM gadget
  ...

Pull xfs fix from Chandan Babu:

 - Validate quota records recovered from the log before writing them to
   the disk.

* tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: dquot recovery does not validate the recovered dquot
  xfs: clean up dqblk extraction

Pull arm64 fixes from Catalin Marinas:

 - Fix "rodata=on" not disabling "rodata=full" on arm64

 - Add arm64 make dependency between vmlinuz.efi and Image, leading to
   occasional build failures previously (with parallel building)

 - Add newline to the output formatting of the za-fork kselftest

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: add dependency between vmlinuz.efi and Image
  kselftest/arm64: Fix output formatting for za-fork
  arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y

Pull xen fixes from Juergen Gross:

 - A small cleanup patch for the Xen privcmd driver

 - A fix for the swiotlb-xen driver which was missing the advertising of
   the maximum mapping length

 - A fix for Xen on Arm for a longstanding bug, which happened to occur
   only recently: a structure in percpu memory crossed a page boundary,
   which was rejected by the hypervisor

* tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: fix xen_vcpu_info allocation alignment
  xen: privcmd: Replace zero-length array with flex-array member and use __counted_by
  swiotlb-xen: provide the "max_mapping_size" method

Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>

Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.

They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.

There is no need to keep them, so simply remove them.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Bruno Haible <bruno@clisp.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080
Cc: stable@vger.kernel.org

Make sure that the __bug_table section gets 32- or 64-bit aligned,
depending if a 32- or 64-bit kernel is being built.
Mark it non-writeable and use .blockz instead of the .org assembler
directive to pad the struct.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+

Make sure the .PARISC.unwind section will be 32-bit aligned.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+

On parisc we need 16-byte alignment for variables which are used for
locking. Mark the __lock_aligned attribute acordingly so that the
.data..lock_aligned section will get that alignment in the generated
object files.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+

The jump_table stores two 32-bit words and one 32- (on 32-bit kernel)
or one 64-bit word (on 64-bit kernel).
Ensure that the last word is always 64-bit aligned on a 64-bit kernel
by aligning the whole structure on sizeof(long).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v6.0+