- 14 Apr, 2013 2 commits
-
-
Sylwester Nawrocki authored
Move the sub-device group ID definitions to the driver's public header so they are available to other media drivers that need to share modules found in exynos4-is. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Make sure mem_info[] array is not used uninitialized. This prevents following compiler warning: drivers/media/platform/s5p-mfc/s5p_mfc.c: In function s5p_mfc_probe: drivers/media/platform/s5p-mfc/s5p_mfc.c:1032:33: warning: mem_info[0] may be used uninitialized in this function [-Wuninitialized] drivers/media/platform/s5p-mfc/s5p_mfc.c:1021:15: note: mem_info[0] was declared here drivers/media/platform/s5p-mfc/s5p_mfc.c:1032:33: warning: mem_info[1] may be used uninitialized in this function [-Wuninitialized] drivers/media/platform/s5p-mfc/s5p_mfc.c:1021:15: note: mem_info[1] was declared here Signed-off-by:
-
- 12 Apr, 2013 2 commits
-
-
Hans Verkuil authored
Fix for this compiler warning: CC [M] drivers/media/i2c/s5c73m3/s5c73m3-core.o drivers/media/i2c/s5c73m3/s5c73m3-core.c: In function ‘s5c73m3_load_fw’: drivers/media/i2c/s5c73m3/s5c73m3-core.c:360:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat] Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Kamil Debski authored
Add support for V4L2_DEC_CMD_STOP command which will instruct MFC device to finish decoding and release all remaining frames kept for reference to the user. After dequeueing last decoded frame the driver will generate an V4L2_EVENT_EOS event. Signed-off-by:
-
- 08 Apr, 2013 16 commits
-
-
Peter Wiese authored
Add support for Philips Semiconductor (now NXP) SAA7146 reference design DVB Sat card, using ALPS BSRU6 tuner. [mchehab@redhat.com: Merge conflicts fix; email whitespacing unmangling] Signed-off-by:
Peter Wiese <peter.wiese@gmx.de> Signed-off-by:
-
Evgeny Plehov authored
MultiPLP filtering support for CXD2820r. Signed-off-by:
Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Symbol rate ratio were using a rough calculus, as the code was limited to 32 bits arithmetic. Change it to 64 bits, in order to better estimate the bandwidth low-pass filter on the demod. This should reduce the noise and improve reception. Reported-by:
Hans-Peter Jansen <hpj@urpla.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
Using 'i' for the guard interval temporary var is a bad idea, as 'i' is generally used by "anonymous" indexes. Let's rename modulation, fec and guard interval temp vars with a meaningful name, as that makes easier to understand the code and avoids cut-and-paste types of error. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Dan Carpenter <dan.carpenter@oracle.com>: Smatch warnings: drivers/media/dvb-frontends/mb86a20s.c:644 mb86a20s_layer_bitrate() error: buffer overflow 'state->estimated_rate' 3 <= 3 What happens there is that estimate_rate index should be the layer number, and not the guard interval. Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
We're using the anonymous 'i' to indicate the layer number on several places on the driver. That's not good, as some cut-and-paste type of change might be doing the wrong thing. So, call it as "layer" everywhere. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Dan Carpenter <dan.carpenter@oracle.com> FYI, there are new smatch warnings show up in: tree: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next master head: da17d7bda957ae4697b6abc0793f74fb9b50b58f commit: 04fa725e [media] mb86a20s: Implement set_frontend cache logic New smatch warnings: drivers/media/dvb-frontends/mb86a20s.c:1897 mb86a20s_set_frontend() error: buffer overflow 'mb86a20s_subchannel' 8 <= 8 04fa725e Mauro Carvalho Chehab 2013-03-04 1894 if (c->isdbt_sb_subchannel > ARRAY_SIZE(mb86a20s_subchannel)) 04fa725e Mauro Carvalho Chehab 2013-03-04 1895 c->isdbt_sb_subchannel = 0; 04fa725e Mauro Carvalho Chehab 2013-03-04 1896 04fa725e Mauro Carvalho Chehab 2013-03-04 @1897 state->subchannel = mb86a20s_subchannel[c->isdbt_sb_subchannel]; Reported-by:
-
Mauro Carvalho Chehab authored
Instead of using the magic number "3", use NUM_LAYERS macro on all places that are related to the ISDB-T layers. This makes the source code a little more readable. No functional changes. Signed-off-by:
-
Ondrej Zary authored
Use enum instead of magic values for LNA config in tda8290. Update tda827x, tda18271 and saa7134 to use the enum too. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Ondrej Zary authored
Add AverMedia AverTV Satellite Hybrid+FM (A706) card to saa7134 driver. Working: analog inputs, TV, FM radio and IR remote control. Untested: DVB-S. Signed-off-by:
-
Ondrej Zary authored
config looks like a hack that was added to tuner-core to allow some configuration of TDA8290 tuner (it's not used by any other driver). But with the new configuration options of tda8290 driver (no_i2c_gate and std_map), it's no longer sufficient. Change config to be void * instead, which allows passing tuner-dependent config struct to drivers. Also update saa7134 driver to reflect this change (no other driver uses this). Signed-off-by:
-
Ondrej Zary authored
Allow specifying a custom std_map for tda18271 by external configuration. This is required by cards that require custom std_map for analog TV or radio, like AverMedia A706. Signed-off-by:
-
Ondrej Zary authored
Allow disabling I2C gate handling by external configuration. This is required by cards that have all devices on a single I2C bus, like AverMedia A706. Signed-off-by:
-
Mauro Carvalho Chehab authored
Hauppauge Nova-S-Plus DVB-S model 92001 does not lock on horizontal polarisation. According with the info provided at the BZ, model 92002 does. The difference is that, on model 92001, the tone select is done via isl6421, while, on other devices, this is done via cx24123 code. This patch adds a way to override the demod's set_tone at isl6421 driver. In order to avoid regressions, the override is enabled only for cx88 Nova S plus model 92001. For all other models and devices, the set_tone is provided by the demod driver. Patch originally proposed at bz@9476[1] by Michel Meyers and John Donoghue but applying the original patch would break support for all other devices based on isl6421. [1] https://bugzilla.kernel.org/show_bug.cgi?id=9476Tested-by:
Adam Sampson <ats@offog.org> Tested-by:
-
Jiri Slaby authored
rc_unregister_device already calls rc_free_device to free the passed device. But in one of ttusbir's probe fail paths, we call rc_unregister_device _and_ rc_free_device. This is wrong and results in a double free. Instead, set rc to NULL resulting in rc_free_device being a noop. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Mauro Carvalho Chehab authored
"enum dmx_ts_pes" and "typedef enum dmx_pes_type_t" are just the same enum declared twice, since Kernel (2.6.12). There's no reason to duplicate it there, and sparse complains about that: drivers/media/dvb-core/dmxdev.c:600:55: warning: mixing different enum types So, remove the internal define, keeping just the external one. Internally, use only "enum dmx_ts_pes", as it is too late to drop dmx_pes_type_t from the userspace API. Signed-off-by:
-
- 04 Apr, 2013 20 commits
-
-
Sylwester Nawrocki authored
Make sure media_entity_pipeline_stop() is called on video device close in cases where there was VIDIOC_STREAMON ioctl and no VIDIOC_STREAMOFF. This patch fixes media entities stream_count state which could prevent links from being disconnected, due to non-zero stream_count. Signed-off-by:
-
Sylwester Nawrocki authored
This patch fixes erroneous setup of the YUV order caused by not clearing FIMC_REG_MSCTRL_ORDER422_MASK bit field before setting proper FIMC_REG_MSCTRL_ORDER422 bits. This resulted in false colors for YUYV, YVYU, UYVY, VYUY color formats, depending in what sequence those were configured by user space. YUV order definitions are corrected so that following convention is used: | byte3 | byte2 | byte1 | byte0 -------+-------+-------+-------+------ YCBYCR | CR | Y | CB | Y YCRYCB | CB | Y | CR | Y CBYCRY | Y | CR | Y | CB CRYCBY | Y | CB | Y | CR Signed-off-by: -
Sylwester Nawrocki authored
The FIMC-LITE output DMA allows to configure different YUV order than the order at the camera input interface. Thus there is some limited colorspace conversion possible. This patch makes the color format variable be per FIMC-LITE input/output, rather than a global per device. This also fixes incorrect behavior where color format at the FIMC-LITE.N subdev's source pad is modified by VIDIOC_S_FMT ioctl on the related video node. YUV order definitions are corrected so that we use notation: | byte3 | byte2 | byte1 | byte0 -------+-------+-------+-------+------ YCBYCR | CR | Y | CB | Y YCRYCB | CB | Y | CR | Y CBYCRY | Y | CR | Y | CB CRYCBY | Y | CB | Y | CR Signed-off-by: -
Sylwester Nawrocki authored
There is no need to use separate variant data structure for each FIMC-LITE IP instance. According to my knowledge there are no differences across them on Exynos4 as well as Exynos5 SoCs. Drop flite_variant data structure and use struct flite_drvdata instead. Signed-off-by:
-
Sylwester Nawrocki authored
The Exynos platform will support only device tree based booting from v3.10. The FIMC variant data will be parsed directly from the device tree, hence the now unused static data can be removed. Signed-off-by:
-
Sylwester Nawrocki authored
Create disabled links from the FIMC-LITE subdevs to the FIMC-IS-ISP subdev and from FIMC-IS-ISP to all FIMC subdevs. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds support for registration of the FIMC-IS device represented by the FIMC-IS-ISP subdev to the top level media device driver. The FIMC-IS subsystem is available on Exynos4x12 SoCs which support only device tree based booting. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds DT binding documentaton for the Imaging Subsystem (camera ISP) found on Samsung Exynos4x12 SoCs. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds a common image sensor driver and Makefile/Kconfig to enable compilation of the whole IS driver. The sensor subdev driver currently only handles an image sensor's power supplies and reset signal. There is no I2C communication as it is handled by the ISP's firmware. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds the ISP processing parameters interface files. Signed-off-by:
Younghwan Joo <yhwan.joo@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds the ISP I2C bus controller driver files. Creating a standard I2C bus adapter, even if the driver doesn't actually communicate with the hardware and it is instead controlled by the ISP firmware running on the Cortex-A5, allows to use standard hardware description in the device tree. As the sensor would have actually had a standard V4L2 sub-device driver run on the host CPU. This approach allows to adapt the driver with a relatively small effort should the Imaging Subsystem architecture change so that the I2C bus is handled by the host's CPU OS, rather than the internal FIMC-IS ARM CPU firmware. The image sensor driver could be a standard I2C client driver, as in case of most existing image sensors. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds a set of core files of the Exynos4x12 FIMC-IS V4L2 driver. This includes main functionality like allocating memory, loading the firmware, FIMC-IS register interface and host CPU <-> IS command and error code definitions. The driver currently exposes a single subdev named FIMC-IS-ISP, which corresponds to the FIMC-IS ISP and DRC IP blocks. The FIMC-IS-ISP subdev currently supports only a subset of user controls. For other controls we need several extensions at the V4L2 API. The supported standard controls are: brightness, contrast, saturation, hue, sharpness, 3a_lock, exposure_time_absolute, white_balance_auto_preset, iso_sensitivity, iso_sensitivity_auto, exposure_metering_mode. Signed-off-by:
-
Sylwester Nawrocki authored
v4l2_of_parse_parallel_bus() function is now static and EXPORT_SYMBOL() doesn't apply to it any more. Drop this meaningless statement, which was supposed to be done in the original merged patch. While at it, edit the copyright notice so it is sorted in both the v4l2-of.c and v4l2-of.h file in newest entries on top order, and state clearly I'm just the author of parts of the code, not the copyright owner. Signed-off-by:
-
Sylwester Nawrocki authored
The 'camera' DT node needs to have sclk_cam0/1 and pxl_async0/1 clocks specified, while 'fimc' nodes should have only "fimc" and "sclk_fimc". "mux" and "parent" are leftovers from early versions of patches adding DT support, when the IP bus clock parent clock was being set by the driver. A better solution is needed to have e.g. clocks driver setting all required parent clocks, before clock consumers start using the clocks. Currently this binding doesn't describe parent clocks setup, it needs to be specified and handled somewhere else. Signed-off-by:
-
Sylwester Nawrocki authored
Currently the whole driver depends on MFD_SYSCON, which in turn depends on OF. To allow to use the driver on non-dt platforms (S5PV210) the SYSREG support is made conditional (it is needed only for dt enabled platforms) and MFD_SYSCON is selected if OF is enabled, instead of depending on OF. Signed-off-by:
-
Arnd Bergmann authored
In multiplatform configurations, we cannot include headers provided by only the exynos platform. Fortunately a number of drivers that include those headers do not actually need them, so we can just remove the inclusions. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by:
-
Sachin Kamat authored
struct dev_pm_ops should be const. Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by:
-
