- 19 Oct, 2023 5 commits
-
-
Jiawen Wu authored
Since PBA info can be read from lspci, delete txgbe_read_pba_string() and the prints. In addition, delete the redundant MAC address printing. Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231017100635.154967-1-jiawenwu@trustnetic.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Alexander Stein says: ==================== net: fec: Fix device_get_match_data usage this is v2 adressing the regression introduced by commit b0377116 ("net: ethernet: Use device_get_match_data()"). You could also remove the (!dev_info) case for Coldfire as this platform has no quirks. But IMHO this should be kept as long as Coldfire platform data is supported. ==================== Link: https://lore.kernel.org/r/20231017063419.925266-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
Alexander Stein authored
All i.MX platforms (non-Coldfire) use DT nowadays, so their platform ID entries can be removed. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231017063419.925266-3-alexander.stein@ew.tq-group.comSigned-off-by:
-
Alexander Stein authored
device_get_match_data() expects that of_device_id->data points to actual fec_devinfo data, not a platform_device_id entry. Fix this by adjusting OF device data pointers to their corresponding structs. enum imx_fec_type is now unused and can be removed. Fixes: b0377116 ("net: ethernet: Use device_get_match_data()") Signed-off-by:
-
Muhammad Muzammil authored
iosm_ipc_chnl_cfg.h: Fixed typo iosm_ipc_imem_ops.h: Fixed typo iosm_ipc_mux.h: Fixed typo iosm_ipc_pm.h: Fixed typo iosm_ipc_port.h: Fixed typo iosm_ipc_trace.h: Fixed typo Signed-off-by:
Muhammad Muzammil <m.muzzammilashraf@gmail.com> Reviewed-by:
-
- 18 Oct, 2023 35 commits
-
-
Phil Sutter authored
Assume that caller's 'to' offset really represents an upper boundary for the pattern search, so patterns extending past this offset are to be rejected. The old behaviour also was kind of inconsistent when it comes to fragmentation (or otherwise non-linear skbs): If the pattern started in between 'to' and 'from' offsets but extended to the next fragment, it was not found if 'to' offset was still within the current fragment. Test the new behaviour in a kselftest using iptables' string match. Suggested-by:
Pablo Neira Ayuso <pablo@netfilter.org> Fixes: f72b948d ("[NET]: skb_find_text ignores to argument") Signed-off-by:
Phil Sutter <phil@nwl.cc> Reviewed-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextDavid S. Miller authored
Florian Westphal says: ==================== netfilter next pull request 2023-10-18 This series contains initial netfilter skb drop_reason support, from myself. First few patches fix up a few spots to make sure we won't trip when followup patches embed error numbers in the upper bits (we already do this in some places). Then, nftables and bridge netfilter get converted to call kfree_skb_reason directly to let tooling pinpoint exact location of packet drops, rather than the existing NF_DROP catchall in nf_hook_slow(). I would like to eventually convert all netfilter modules, but as some callers cannot deal with NF_STOLEN (notably act_ct), more preparation work is needed for this. Last patch gets rid of an ugly 'de-const' cast in nftables. ==================== Signed-off-by: -
David S. Miller authored
Paul Greenwalt says: ==================== ethtool: Add link mode maps for forced speeds The following patch set was initially a part of [1]. As the purpose of the original series was to add the support of the new hardware to the intel ice driver, the refactoring of advertised link modes mapping was extracted to a new set. The patch set adds a common mechanism for mapping Ethtool forced speeds with Ethtool supported link modes, which can be used in drivers code. [1] https://lore.kernel.org/netdev/20230823180633.2450617-1-pawel.chmielewski@intel.com Changelog: v4->v5: Separated ethtool and qede changes into two patches, fixed indentation, and moved ethtool_forced_speed_maps_init() from ioctl.c to ethtool.h v3->v4: Moved the macro for setting fields into the common header file v2->v3: Fixed whitespaces, added missing line at end of file v1->v2: Fixed formatting, typo, moved declaration of iterator to loop line. ==================== Signed-off-by:
-
Pawel Chmielewski authored
Refactor ice_get_link_ksettings to using forced speed to link modes mapping. Suggested-by : Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by:
Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by:
-
Paul Greenwalt authored
Refactor qede_forced_speed_maps_init() to use commen implementation ethtool_forced_speed_maps_init(). The qede driver was compile tested only. Reviewed-by:
-
Paul Greenwalt authored
The need to map Ethtool forced speeds to Ethtool supported link modes is common among drivers. To support this, add a common structure for forced speed maps and a function to init them. This is solution was originally introduced in commit 1d4e4ecc ("qede: populate supported link modes maps on module init") for qede driver. ethtool_forced_speed_maps_init() should be called during driver init with an array of struct ethtool_forced_speed_map to populate the mapping. Definitions for maps themselves are left in the driver code, as the sets of supported link modes may vary between the devices. Suggested-by:
-
Florian Westphal authored
The set backend using this already has to work around this via ugly cast, don't spread this pattern. Signed-off-by: -
Florian Westphal authored
errno is 0 because these hooks are called from prerouting and forward. There is no socket that the errno would ever be propagated to. Other netfilter modules (e.g. nf_nat, conntrack, ...) can be converted in a similar way. Signed-off-by: -
Florian Westphal authored
net_dropmonitor blames core.c:nf_hook_slow. Add NF_DROP_REASON() helper and use it in nft_do_chain(). The helper releases the skb, so exact drop location becomes available. Calling code will observe the NF_STOLEN verdict instead. Adjust nf_hook_slow so we can embed an erro value wih NF_STOLEN verdicts, just like we do for NF_DROP. After this, drop in nftables can be pinpointed to a drop due to a rule or the chain policy. Signed-off-by: -
Florian Westphal authored
Same as previous change: we need to mask out the non-verdict bits, as upcoming patches may embed an errno value in NF_STOLEN verdicts too. NF_DROP could already do this, but not all called functions do this. Checks that only test ret vs NF_ACCEPT are fine, the 'errno parts' are always 0 for those. Signed-off-by: -
Florian Westphal authored
This function calls helpers that can return nf-verdicts, but then those get converted to -1/0 as thats what the caller expects. Theoretically NF_DROP could have an errno number set in the upper 24 bits of the return value. Or any of those helpers could return NF_STOLEN, which would result in use-after-free. This is fine as-is, the called functions don't do this yet. But its better to avoid possible future problems if the upcoming patchset to add NF_DROP_REASON() support gains further users, so remove the 0/-1 translation from the picture and pass the verdicts down to the caller. Signed-off-by: -
Florian Westphal authored
nftables trace infra must mask out the non-verdict bit parts of the return value, else followup changes that 'return errno << 8 | NF_STOLEN' will cause breakage. Signed-off-by: -
Florian Westphal authored
These checks assume that the caller only returns NF_DROP without any errno embedded in the upper bits. This is fine right now, but followup patches will start to propagate such errors to allow kfree_skb_drop_reason() in the called functions, those would then indicate 'errno << 8 | NF_STOLEN'. To not break things we have to mask those parts out. Signed-off-by: -
David S. Miller authored
Jiri Pirko says: ==================== devlink: fix a deadlock when taking devlink instance lock while holding RTNL lock devlink_port_fill() may be called sometimes with RTNL lock held. When putting the nested port function devlink instance attrs, current code takes nested devlink instance lock. In that case lock ordering is wrong. Patch #1 is a dependency of patch #2. Patch #2 converts the peernet2id_alloc() call to rely in RCU so it could called without devlink instance lock. Patch #3 takes device reference for devlink instance making sure that device does not disappear before devlink_release() is called. Patch #4 benefits from the preparations done in patches #2 and #3 and removes the problematic nested devlink lock aquisition. Patched #5-#7 improve documentation to reflect this issue so it is avoided in the future. ==================== Signed-off-by: -
Jiri Pirko authored
Add a documentation for devlink_rel_nested_in_notify() describing the devlink instance locking consequences. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
-
Jiri Pirko authored
Add a note describing the locking order of taking RTNL lock with devlink instance lock. Signed-off-by:
-
Jiri Pirko authored
Add a part talking about nested devlink instances describing the helpers and locking ordering. Signed-off-by:
-
Jiri Pirko authored
Lockdep reports following issue: WARNING: possible circular locking dependency detected ------------------------------------------------------ devlink/8191 is trying to acquire lock: ffff88813f32c250 (&devlink->lock_key#14){+.+.}-{3:3}, at: devlink_rel_devlink_handle_put+0x11e/0x2d0 but task is already holding lock: ffffffff8511eca8 (rtnl_mutex){+.+.}-{3:3}, at: unregister_netdev+0xe/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (rtnl_mutex){+.+.}-{3:3}: lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 register_netdevice_notifier_net+0x13/0x30 mlx5_lag_add_mdev+0x51c/0xa00 [mlx5_core] mlx5_load+0x222/0xc70 [mlx5_core] mlx5_init_one_devl_locked+0x4a0/0x1310 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x786/0xd00 [mlx5_core] local_pci_probe+0xd7/0x180 pci_device_probe+0x231/0x720 really_probe+0x1e4/0xb60 __driver_probe_device+0x261/0x470 driver_probe_device+0x49/0x130 __driver_attach+0x215/0x4c0 bus_for_each_dev+0xf0/0x170 bus_add_driver+0x21d/0x590 driver_register+0x133/0x460 vdpa_match_remove+0x89/0xc0 [vdpa] do_one_initcall+0xc4/0x360 do_init_module+0x22d/0x760 load_module+0x51d7/0x6750 init_module_from_file+0xd2/0x130 idempotent_init_module+0x326/0x5a0 __x64_sys_finit_module+0xc1/0x130 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #2 (mlx5_intf_mutex){+.+.}-{3:3}: lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 mlx5_register_device+0x3e/0xd0 [mlx5_core] mlx5_init_one_devl_locked+0x8fa/0x1310 [mlx5_core] mlx5_devlink_reload_up+0x147/0x170 [mlx5_core] devlink_reload+0x203/0x380 devlink_nl_cmd_reload+0xb84/0x10e0 genl_family_rcv_msg_doit+0x1cc/0x2a0 genl_rcv_msg+0x3c9/0x670 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x435/0x6f0 netlink_sendmsg+0x7a0/0xc70 sock_sendmsg+0xc5/0x190 __sys_sendto+0x1c8/0x290 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #1 (&dev->lock_key#8){+.+.}-{3:3}: lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 mlx5_init_one_devl_locked+0x45/0x1310 [mlx5_core] mlx5_devlink_reload_up+0x147/0x170 [mlx5_core] devlink_reload+0x203/0x380 devlink_nl_cmd_reload+0xb84/0x10e0 genl_family_rcv_msg_doit+0x1cc/0x2a0 genl_rcv_msg+0x3c9/0x670 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x435/0x6f0 netlink_sendmsg+0x7a0/0xc70 sock_sendmsg+0xc5/0x190 __sys_sendto+0x1c8/0x290 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #0 (&devlink->lock_key#14){+.+.}-{3:3}: check_prev_add+0x1af/0x2300 __lock_acquire+0x31d7/0x4eb0 lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 devlink_rel_devlink_handle_put+0x11e/0x2d0 devlink_nl_port_fill+0xddf/0x1b00 devlink_port_notify+0xb5/0x220 __devlink_port_type_set+0x151/0x510 devlink_port_netdevice_event+0x17c/0x220 notifier_call_chain+0x97/0x240 unregister_netdevice_many_notify+0x876/0x1790 unregister_netdevice_queue+0x274/0x350 unregister_netdev+0x18/0x20 mlx5e_vport_rep_unload+0xc5/0x1c0 [mlx5_core] __esw_offloads_unload_rep+0xd8/0x130 [mlx5_core] mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core] mlx5_esw_offloads_unload_rep+0x85/0xc0 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x41/0x90 [mlx5_core] mlx5_devlink_sf_port_del+0x120/0x280 [mlx5_core] genl_family_rcv_msg_doit+0x1cc/0x2a0 genl_rcv_msg+0x3c9/0x670 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x435/0x6f0 netlink_sendmsg+0x7a0/0xc70 sock_sendmsg+0xc5/0x190 __sys_sendto+0x1c8/0x290 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 other info that might help us debug this: Chain exists of: &devlink->lock_key#14 --> mlx5_intf_mutex --> rtnl_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(mlx5_intf_mutex); lock(rtnl_mutex); lock(&devlink->lock_key#14); Problem is taking the devlink instance lock of nested instance when RTNL is already held. To fix this, don't take the devlink instance lock when putting nested handle. Instead, rely on the preparations done by previous two patches to be able to access device pointer and obtain netns id without devlink instance lock held. Fixes: c137743b ("devlink: introduce object and nested devlink relationship infra") Signed-off-by: -
Jiri Pirko authored
In preparation to allow to access device pointer without devlink instance lock held, make sure the device pointer is usable until devlink_release() is called. Fixes: c137743b ("devlink: introduce object and nested devlink relationship infra") Signed-off-by:
-
Jiri Pirko authored
peernet2id_alloc() allows to be called lockless with peer net pointer obtained in RCU critical section and makes sure to return ns ID if net namespaces is not being removed concurrently. Benefit from read_pnet_rcu() helper addition, use it to obtain net pointer under RCU read lock and pass it to peernet2id_alloc() to get ns ID. Fixes: c137743b ("devlink: introduce object and nested devlink relationship infra") Signed-off-by:
-
Jiri Pirko authored
Make the net pointer stored in possible_net_t structure annotated as an RCU pointer. Change the access helpers to treat it as such. Introduce read_pnet_rcu() helper to allow caller to dereference the net pointer under RCU read lock. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2023-10-10 1) Adham Faris, Increase max supported channels number to 256 2) Leon Romanovsky, Allow IPsec soft/hard limits in bytes 3) Shay Drory, Replace global mlx5_intf_lock with HCA devcom component lock 4) Wei Zhang, Optimize SF creation flow During SF creation, HCA state gets changed from INVALID to IN_USE step by step. Accordingly, FW sends vhca event to driver to inform about this state change asynchronously. Each vhca event is critical because all related SW/FW operations are triggered by it. Currently there is only a single mlx5 general event handler which not only handles vhca event but many other events. This incurs huge bottleneck because all events are forced to be handled in serial manner. Moreover, all SFs share same table_lock which inevitably impacts each other when they are created in parallel. This series will solve this issue by: 1. A dedicated vhca event handler is introduced to eliminate the mutual impact with other mlx5 events. 2. Max FW threads work queues are employed in the vhca event handler to fully utilize FW capability. 3. Redesign SF active work logic to completely remove table_lock. With above optimization, SF creation time is reduced by 25%, i.e. from 80s to 60s when creating 100 SFs. Patches summary: Patch 1 - implement dedicated vhca event handler with max FW cmd threads of work queues. Patch 2 - remove table_lock by redesigning SF active work logic. * tag 'mlx5-updates-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Allow IPsec soft/hard limits in bytes net/mlx5e: Increase max supported channels number to 256 net/mlx5e: Preparations for supporting larger number of channels net/mlx5e: Refactor mlx5e_rss_init() and mlx5e_rss_free() API's net/mlx5e: Refactor mlx5e_rss_set_rxfh() and mlx5e_rss_get_rxfh() net/mlx5e: Refactor rx_res_init() and rx_res_free() APIs net/mlx5e: Use PTR_ERR_OR_ZERO() to simplify code net/mlx5: Use PTR_ERR_OR_ZERO() to simplify code net/mlx5: fix config name in Kconfig parameter documentation net/mlx5: Remove unused declaration net/mlx5: Replace global mlx5_intf_lock with HCA devcom component lock net/mlx5: Refactor LAG peer device lookout bus logic to mlx5 devcom net/mlx5: Avoid false positive lockdep warning by adding lock_class_key net/mlx5: Redesign SF active work to remove table_lock net/mlx5: Parallelize vhca event handling ==================== Link: https://lore.kernel.org/r/20231014171908.290428-1-saeed@kernel.orgSigned-off-by: -
Justin Stitt authored
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect both hi.data.modename and hi.data.drivername to be NUL-terminated based on its usage with sprintf: | sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s", | bc->cfg.intclk ? "int" : "ext", | bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps, | bc->cfg.loopback ? ",loopback" : ""); Note that this data is copied out to userspace with: | if (copy_to_user(data, &hi, sizeof(hi))) ... however, the data was also copied FROM the user here: | if (copy_from_user(&hi, data, sizeof(hi))) Considering the above, a suitable replacement is strscpy_pad() as it guarantees NUL-termination on the destination buffer while also NUL-padding (which is good+wanted behavior when copying data to userspace). Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
Justin Stitt <justinstitt@google.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Jakub Kicinski authored
Jiri moved version to legacy specs in commit 0f07415e ("netlink: specs: don't allow version to be specified for genetlink"). Update the documentation. Reviewed-by:
-
Jakub Kicinski authored
I recently cleaned up specs to not specify enum-as-flags when target enum is already defined as flags. YNL Python library did not convert flags, unfortunately, so this caused breakage for Stan and Willem. Note that the nlspec.py abstraction already hides the differences between flags and enums (value vs user_value), so the changes are pretty trivial. Fixes: 0629f22e ("ynl: netdev: drop unnecessary enum-as-flags") Reported-and-tested-by:
Willem de Bruijn <willemb@google.com> Reported-and-tested-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/all/ZS10NtQgd_BJZ3RU@google.com/ Link: https://lore.kernel.org/r/20231016213937.1820386-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Russell King says: ==================== net: remove last of the phylink validate methods and clean up This four patch series removes the last of the phylink MAC .validate methods which can be found in the Freescale fman driver. fman has a requirement that half duplex may not be supported in RGMII mode, which is currently handled in its .validate method. In order to keep this functionality when removing the .validate method, we need to replace that with equivalent functionality, for which I propose the optional .mac_get_caps method in the first patch. The advantage of this approach over the .validate callback is that MAC drivers only have to deal with the MAC_* capabilities, and don't need to call back into phylink functions to do the masking of the ethtool linkmodes etc - which then becomes internal to phylink. This can be seen in the fourth patch where we make a load of these methods static. ==================== Link: https://lore.kernel.org/r/ZS1Z5DDfHyjMryYu@shell.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
Remove exports for phylink_caps_to_linkmodes(), phylink_get_capabilities(), phylink_validate_mask_caps() and phylink_generic_validate(). Also, as phylink_generic_validate() is no longer called, we can remove its implementation as well. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qsPkK-009wip-W9@rmk-PC.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
The MAC .validate() method is no longer used, so remove it from the phylink_mac_ops structure, and remove the callsite in phylink_validate_mac_and_pcs(). Signed-off-by:
-
Russell King (Oracle) authored
Convert fman to use the .mac_get_caps() method rather than the .validate() method. Signed-off-by:
Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/E1qsPkA-009wid-Kv@rmk-PC.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
Provide a new method, mac_get_caps() to get the MAC capabilities for the specified interface mode. This is for MACs which have special requirements, such as not supporting half-duplex in certain interface modes, and will replace the validate() method. Signed-off-by:
-
Jakub Kicinski authored
Recent FW interface update bumped the size of struct hwrm_func_cfg_input above 128B which is the max some devices support. Probe on Stratus (BCM957452) with FW 20.8.3.11 fails with: bnxt_en ...: Unable to reserve tx rings bnxt_en ...: 2nd rings reservation failed. bnxt_en ...: Not enough rings available. Once probe is fixed other errors pop up: bnxt_en ...: Failed to set async event completion ring. This is because __hwrm_send() rejects requests larger than bp->hwrm_max_ext_req_len with -E2BIG. Since the driver doesn't actually access any of the new fields, yet, trim the length. It should be safe. Similar workaround exists for backing_store_cfg_input. Although that one mins() to a constant of 256, not 128 we'll effectively use here. Michael explains: "the backing store cfg command is supported by relatively newer firmware that will accept 256 bytes at least." To make debugging easier in the future add a warning for oversized requests. Fixes: 754fbf60 ("bnxt_en: Update firmware interface to 1.10.2.171") Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231016171640.1481493-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Johannes Nixdorf says: ==================== bridge: Add a limit on learned FDB entries Introduce a limit on the amount of learned FDB entries on a bridge, configured by netlink with a build time default on bridge creation in the kernel config. For backwards compatibility the kernel config default is disabling the limit (0). Without any limit a malicious actor may OOM a kernel by spamming packets with changing MAC addresses on their bridge port, so allow the bridge creator to limit the number of entries. Currently the manual entries are identified by the bridge flags BR_FDB_LOCAL or BR_FDB_ADDED_BY_USER, atomically bundled under the new flag BR_FDB_DYNAMIC_LEARNED. This means the limit also applies to entries created with BR_FDB_ADDED_BY_EXT_LEARN but none of BR_FDB_LOCAL or BR_FDB_ADDED_BY_USER, e.g. ones added by SWITCHDEV_FDB_ADD_TO_BRIDGE. Link to the corresponding iproute2 changes: https://lore.kernel.org/r/20230919-fdb_limit-v4-1-b4d2dc4df30f@avm.de v4: https://lore.kernel.org/r/20230919-fdb_limit-v4-0-39f0293807b8@avm.de/ v3: https://lore.kernel.org/r/20230905-fdb_limit-v3-0-7597cd500a82@avm.de/ v2: https://lore.kernel.org/netdev/20230619071444.14625-1-jnixdorf-oss@avm.de/ v1: https://lore.kernel.org/netdev/20230515085046.4457-1-jnixdorf-oss@avm.de/ ==================== Link: https://lore.kernel.org/r/20231016-fdb_limit-v5-0-32cddff87758@avm.deSigned-off-by:
-
Johannes Nixdorf authored
Add a suite covering the fdb_n_learned and fdb_max_learned bridge features, touching all special cases in accounting at least once. Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
Johannes Nixdorf <jnixdorf-oss@avm.de> Link: https://lore.kernel.org/r/20231016-fdb_limit-v5-5-32cddff87758@avm.deSigned-off-by:
-
Johannes Nixdorf authored
Set any new attributes added to br_policy to be parsed strictly, to prevent userspace from passing garbage. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20231016-fdb_limit-v5-4-32cddff87758@avm.deSigned-off-by:
-
Johannes Nixdorf authored
The previous patch added accounting and a limit for the number of dynamically learned FDB entries per bridge. However it did not provide means to actually configure those bounds or read back the count. This patch does that. Two new netlink attributes are added for the accounting and limit of dynamically learned FDB entries: - IFLA_BR_FDB_N_LEARNED (RO) for the number of entries accounted for a single bridge. - IFLA_BR_FDB_MAX_LEARNED (RW) for the configured limit of entries for the bridge. The new attributes are used like this: # ip link add name br up type bridge fdb_max_learned 256 # ip link add name v1 up master br type veth peer v2 # ip link set up dev v2 # mausezahn -a rand -c 1024 v2 0.01 seconds (90877 packets per second # bridge fdb | grep -v permanent | wc -l 256 # ip -d link show dev br 13: br: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 [...] [...] fdb_n_learned 256 fdb_max_learned 256 Signed-off-by:
-
