- 05 May, 2014 6 commits
-
-
Chris Wilson authored
If we include the expected values for the failing ring register checks, it makes it marginally easier to see which is the culprit. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Oscar Mateo <oscar.mateo@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
During module load, if we fail to initialise the rings, we abort the load reporting EIO. However during resume, even though we report EIO as we fail to reinitialize the ringbuffers, the resume continues and the device is restored - albeit in a non-functional state. As we cannot execute any commands on the GPU, it is effectively wedged, mark it so. As we now preserve the ringbuffers across resume, this should prevent UXA from falling into the trap of repeatedly sending invalid batchbuffers and dropping all further rendering into /dev/null. Reported-and-tested-by:
Jiri Kosina <jkosina@suse.cz> References: https://bugs.freedesktop.org/show_bug.cgi?id=76554Signed-off-by:
-
Chris Wilson authored
Even without enabling the ringbuffers to allow command execution, we can still control the display engines to enable modesetting. So make the ringbuffer initialization failure soft, and mark the GPU as wedged instead. v2: Only treat an EIO from ring initialisation as a soft failure, and abort module load for any other failure, such as allocation failures. v3: Add an *ERROR* prior to declaring the GPU wedged so that it stands out like a sore thumb in the logs Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
-
Chris Wilson authored
Tearing down the ring buffers across resume is overkill, risks unnecessary failure and increases fragmentation. After failure, since the device is still active we may end up trying to write into the dangling iomapping and trigger an oops. v2: stop_ringbuffers() was meant to call stop(ring) not cleanup(ring) during resume! Reported-by:
Jae-hyeon Park <jhyeon@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=72351 References: https://bugs.freedesktop.org/show_bug.cgi?id=76554Signed-off-by:
-
Chris Wilson authored
For readibility and guess at the meaning behind the constants. v2: Claim only the meagerest connections with reality. Signed-off-by:
-
Jesse Barnes authored
I don't think this is necessary; at least it doesn't appear to be on my BYT. Dropping it speeds up our shutdown code a little, in some cases resulting in faster init times. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 30 Apr, 2014 8 commits
-
-
git://people.freedesktop.org/~danvet/drmDave Airlie authored
Next pull request, this time more of the drm de-midlayering work. The big thing is that his patch series here removes everything from drm_bus except the set_busid callback. Thierry has a few more patches on top of this to make that one optional to. With that we can ditch all the non-pci drm_bus implementations, which Thierry has already done for the fake tegra host1x drm_bus. Reviewed by Thierry, Laurent and David and now also survived some testing on my intel boxes to make sure the irq fumble is fixed correctly ;-) The last minute rebase was just to add the r-b tags from Thierry for the 2 patches I've redone. * 'drm-init-cleanup' of git://people.freedesktop.org/~danvet/drm: drm/<drivers>: don't set driver->dev_priv_size to 0 drm: Remove dev->kdriver drm: remove drm_bus->get_name drm: rip out dev->devname drm: inline drm_pci_set_unique drm: remove bus->get_irq implementations drm: pass the irq explicitly to drm_irq_install drm/irq: Look up the pci irq directly in the drm_control ioctl drm/irq: track the irq installed in drm_irq_install in dev->irq drm: rename dev->count_lock to dev->buf_lock drm: Rip out totally bogus vga_switcheroo->can_switch locking drm: kill drm_bus->bus_type drm: remove drm_dev_to_irq from drivers drm/irq: remove cargo-culted locking from irq_install/uninstall drm/irq: drm_control is a legacy ioctl, so pci devices only drm/pci: fold in irq_by_busid support drm/irq: simplify irq checks in drm_wait_vblank
-
git://people.freedesktop.org/~danvet/drmDave Airlie authored
bunch of coverity fixes all minor. * 'drm-coverity-fixes' of git://people.freedesktop.org/~danvet/drm: drm: Fix error handling in drm_master_create drm/i2c/tda998x: Fix signed overflow issue drm/bochs: Remove unecessary NULL check in gem_free drm/bochs: Remove unnecessary NULL check in bo_unref drm/udl: Initialize ret in udl_driver_load drm/via: Remove unecessary NULL check drm/ast: Remove unecessary NULL check in gem_free drm/ast: Remove unnecessary NULL check in bo_unref drm/cirrus: Remove unecessary NULL check in gem_free drm/cirrus: Remove unnecessary NULL check in bo_unref drm/mgag200: Remove unecessary NULL check in gem_free drm/mgag200: Remove unecessary NULL check in bo_unref
-
Christian Engelmayer authored
Remove occurrences of unused struct qxl_device pointer in functions qxl_ttm_fault() and qxl_init_mem_type(). Detected by Coverity: CID 1019128, CID 1019129. Signed-off-by:
Christian Engelmayer <cengelma@gmx.at> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
For QXL hw we really want the bits to be replaced as we change the preferred mode on the fly, and the same goes for virgl when I get to it, however the original fix for this seems to have caused a wierd regression on Intel G33 that in a stunning display of failure at opposition to his normal self, Daniel failed to diagnose. So we are left doing this, ugly ugly ugly ugly, Daniel you fixed that G33 yet?, ugly, ugly. Tested-by:
Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by:
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
drm-intel-next-2014-04-16: - vlv infoframe fixes from Jesse - dsi/mipi fixes from Shobhit - gen8 pageflip fixes for LRI/SRM from Damien - cmd parser fixes from Brad Volkin - some prep patches for CHV, DRRS, ... - and tons of little things all over drm-intel-next-2014-04-04: - cmd parser for gen7 but only in enforcing and not yet granting mode - the batch copying stuff is still missing. Also performance is a bit ... rough (Brad Volkin + OACONTROL fix from Ken). - deprecate UMS harder (i.e. CONFIG_BROKEN) - interrupt rework from Paulo Zanoni - runtime PM support for bdw and snb, again from Paulo - a pile of refactorings from various people all over the place to prep for new stuff (irq reworks, power domain polish, ...) drm-intel-next-2014-04-04: - cmd parser for gen7 but only in enforcing and not yet granting mode - the batch copying stuff is still missing. Also performance is a bit ... rough (Brad Volkin + OACONTROL fix from Ken). - deprecate UMS harder (i.e. CONFIG_BROKEN) - interrupt rework from Paulo Zanoni - runtime PM support for bdw and snb, again from Paulo - a pile of refactorings from various people all over the place to prep for new stuff (irq reworks, power domain polish, ...) Conflicts: drivers/gpu/drm/i915/i915_gem_context.c
-
Vineet Gupta authored
There was a very small race window where resume to kernel mode from a Exception Path (or pure kernel mode which is true for most of ARC exceptions anyways), was not disabling interrupts in restore_regs, clobbering the exception regs Anton found the culprit call flow (after many sleepless nights) | 1. we got a Trap from user land | 2. started to service it. | 3. While doing some stuff on user-land memory (I think it is padzero()), | we got a DataTlbMiss | 4. On return from it we are taking "resume_kernel_mode" path | 5. NEED_RESHED is not set, so we go to "return from exception" path in | restore regs. | 6. there seems to be IRQ happening Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Cc: <stable@vger.kernel.org> #3.10, 3.12, 3.13, 3.14 Cc: Anton Kolesov <Anton.Kolesov@synopsys.com> Cc: Francois Bedard <Francois.Bedard@synopsys.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A few collections of small eggs that have been gathered during the Easter holidays. Mostly small ASoC fixes, with a HD-audio quirk and a workaround for Nvidia controller" * tag 'sound-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Suppress CORBRP clear on Nvidia controller chips ALSA: hda - add headset mic detect quirk for a Dell laptop ASoC: jz4740: Remove Makefile entry for removed file ASoC: Intel: Fix audio crash due to negative address offset ASoC: dapm: Fix widget double free with auto-disable DAPM kcontrol ASoC: Intel: Fix incorrect sizeof() in sst_hsw_stream_get_volume() ASoC: Intel: some incorrect sizeof() usages ASoC: cs42l73: Convert to use devm_gpio_request_one ASoC: cs42l52: Convert to use devm_gpio_request_one ASoC: tlv320aic31xx: document that the regulators are mandatory ASoC: fsl_spdif: Fix wrong OFFSET of STC_SYSCLK_DIV ASoC: alc5623: Fix regmap endianness ASoC: tlv320aic3x: fix shared reset pin for DT ASoC: rsnd: fix clock prepare/unprepare
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Smattering of fixes, i915, exynos, tegra, msm, vmwgfx. A bit of framebuffer reference counting fallout fixes, i915 GM45 regression fix, DVI regression fix, vmware info leak between processes fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/exynos: use %pad for dma_addr_t drm/exynos: dsi: use IS_ERR() to check devm_ioremap_resource() results MAINTAINERS: update maintainer entry for Exynos DP driver drm/exynos: balance framebuffer refcount drm/i915: Move all ring resets before setting the HWS page drm/i915: Don't WARN nor handle unexpected hpd interrupts on gmch platforms drm/msm/mdp4: cure for the cursor blues (v2) drm/msm: default to XR24 rather than AR24 drm/msm: fix memory leak drm/tegra: restrict plane loops to legacy planes drm/i915: Allow full PPGTT with param override drm/i915: Discard BIOS framebuffers too small to accommodate chosen mode drm/vmwgfx: Make sure user-space can't DMA across buffer object boundaries v2 drm/i915: get power domain in case the BIOS enabled eDP VDD drm/i915: Don't check gmch state on inherited configs drm/i915: Allow user modes to exceed DVI 165MHz limit
-
- 29 Apr, 2014 6 commits
-
-
Jingoo Han authored
Use %pad for dma_addr_t, because a dma_addr_t type can vary based on build options. So, it prevents possible build warnings in printks. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Reviewed-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Jingoo Han authored
devm_ioremap_resource() returns an error pointer, not NULL. Thus, the result should be checked with IS_ERR(). Signed-off-by:
-
Jingoo Han authored
Recently, Exynos DP driver was moved from drivers/video/exynos/ directory to drivers/gpu/drm/exynos/ directory. So, I update and add maintainer entry for Exynos DP driver. Signed-off-by:
-
Andrzej Hajda authored
exynos_drm_crtc_mode_set assigns primary framebuffer to plane without taking reference. Then during framebuffer removal it is dereferenced twice, causing oops. The patch fixes it. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
single security fix, cc'd stable. * 'vmwgfx-fixes-3.15' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Make sure user-space can't DMA across buffer object boundaries v2
-
Takashi Iwai authored
The recent commit (ca460f86) changed the CORB RP reset procedure to follow the specification with a couple of sanity checks. Unfortunately, Nvidia controller chips seem not following this way, and spew the warning messages like: snd_hda_intel 0000:00:10.1: CORB reset timeout#1, CORBRP = 0 This patch adds the workaround for such chips. It just skips the new reset procedure for the known broken chips. Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 28 Apr, 2014 20 commits
-
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace bugfix from Steven Rostedt: "Takao Indoh reported that he was able to cause a ftrace bug while loading a module and enabling function tracing at the same time. He uncovered a race where the module when loaded will convert the calls to mcount into nops, and expects the module's text to be RW. But when function tracing is enabled, it will convert all kernel text (core and module) from RO to RW to convert the nops to calls to ftrace to record the function. After the convertion, it will convert all the text back from RW to RO. The issue is, it will also convert the module's text that is loading. If it converts it to RO before ftrace does its conversion, it will cause ftrace to fail and require a reboot to fix it again. This patch moves the ftrace module update that converts calls to mcount into nops to be done when the module state is still MODULE_STATE_UNFORMED. This will ignore the module when the text is being converted from RW back to RO" * tag 'trace-fixes-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/module: Hardcode ftrace_module_init() call into load_module()
-
git://git.secretlab.ca/git/linuxLinus Torvalds authored
Pull devicetree bug fixes from Grant Likely: "These are some important bug fixes that need to get into v3.15. This branch contains a pair of important bug fixes for the DT code: - Fix some incorrect binding property names before they enter common usage - Fix bug where some platform devices will be unable to get their interrupt number when they depend on an interrupt controller that is not available at device creation time. This is a problem causing mainline to fail on a number of ARM platforms" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: of/irq: do irq resolution in platform_get_irq of: selftest: add deferred probe interrupt test dt: Fix binding typos in clock-names and interrupt-names -
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Ben Herrenschmidt: "Here is a bunch of post-merge window fixes that have been accumulating in patchwork while I was on vacation or buried under other stuff last week. We have the now usual batch of LE fixes from Anton (sadly some new stuff that went into this merge window had endian issues, we'll try to make sure we do better next time) Some fixes and cleanups to the new 24x7 performance monitoring stuff (mostly typos and cleaning up printk's) A series of fixes for an issue with our runlatch bit, which wasn't set properly for offlined threads/cores and under KVM, causing potentially some counters to misbehave along with possible power management issues. A fix for kexec nasty race where the new kernel wouldn't "see" the secondary processors having reached back into firmware in time. And finally a few other misc (and pretty simple) bug fixes" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (33 commits) powerpc/4xx: Fix section mismatch in ppc4xx_pci.c ppc/kvm: Clear the runlatch bit of a vcpu before napping ppc/kvm: Set the runlatch bit of a CPU just before starting guest ppc/powernv: Set the runlatch bits correctly for offline cpus powerpc/pseries: Protect remove_memory() with device hotplug lock powerpc: Fix error return in rtas_flash module init powerpc: Bump BOOT_COMMAND_LINE_SIZE to 2048 powerpc: Bump COMMAND_LINE_SIZE to 2048 powerpc: Rename duplicate COMMAND_LINE_SIZE define powerpc/perf/hv-24x7: Catalog version number is be64, not be32 powerpc/perf/hv-24x7: Remove [static 4096], sparse chokes on it powerpc/perf/hv-24x7: Use (unsigned long) not (u32) values when calling plpar_hcall_norets() powerpc/perf/hv-gpci: Make device attr static powerpc/perf/hv_gpci: Probe failures use pr_debug(), and padding reduced powerpc/perf/hv_24x7: Probe errors changed to pr_debug(), padding fixed powerpc/mm: Fix tlbie to add AVAL fields for 64K pages powerpc/powernv: Fix little endian issues in OPAL dump code powerpc/powernv: Create OPAL sglist helper functions and fix endian issues powerpc/powernv: Fix little endian issues in OPAL error log code powerpc/powernv: Fix little endian issues with opal_do_notifier calls ...
-
Linus Torvalds authored
BUG_ON() is a big hammer, and should be used _only_ if there is some major corruption that you cannot possibly recover from, making it imperative that the current process (and possibly the whole machine) be terminated with extreme prejudice. The trivial sanity check in the vmacache code is *not* such a fatal error. Recovering from it is absolutely trivial, and using BUG_ON() just makes it harder to debug for no actual advantage. To make matters worse, the placement of the BUG_ON() (only if the range check matched) actually makes it harder to hit the sanity check to begin with, so _if_ there is a bug (and we just got a report from Srivatsa Bhat that this can indeed trigger), it is harder to debug not just because the machine is possibly dead, but because we don't have better coverage. BUG_ON() must *die*. Maybe we should add a checkpatch warning for it, because it is simply just about the worst thing you can ever do if you hit some "this cannot happen" situation. Reported-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
A race exists between module loading and enabling of function tracer. CPU 1 CPU 2 ----- ----- load_module() module->state = MODULE_STATE_COMING register_ftrace_function() mutex_lock(&ftrace_lock); ftrace_startup() update_ftrace_function(); ftrace_arch_code_modify_prepare() set_all_module_text_rw(); <enables-ftrace> ftrace_arch_code_modify_post_process() set_all_module_text_ro(); [ here all module text is set to RO, including the module that is loading!! ] blocking_notifier_call_chain(MODULE_STATE_COMING); ftrace_init_module() [ tries to modify code, but it's RO, and fails! ftrace_bug() is called] When this race happens, ftrace_bug() will produces a nasty warning and all of the function tracing features will be disabled until reboot. The simple solution is to treate module load the same way the core kernel is treated at boot. To hardcode the ftrace function modification of converting calls to mcount into nops. This is done in init/main.c there's no reason it could not be done in load_module(). This gives a better control of the changes and doesn't tie the state of the module to its notifiers as much. Ftrace is special, it needs to be treated as such. The reason this would work, is that the ftrace_module_init() would be called while the module is in MODULE_STATE_UNFORMED, which is ignored by the set_all_module_text_ro() call. Link: http://lkml.kernel.org/r/1395637826-3312-1-git-send-email-indou.takao@jp.fujitsu.comReported-by:Takao Indoh <indou.takao@jp.fujitsu.com> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Hui Wang authored
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255, SID: 0x10280674), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.15 A smattering of driver-specific fixes here, nothing generic. The Cirrus CODEC conversions to devm_ are leak fixes - the conversion adds missing error handling code.
-
Alistair Popple authored
This patch fixes this section mismatch: WARNING: vmlinux.o(.text+0x1efc4): Section mismatch in reference from the function apm821xx_pciex_init_port_hw() to the function .init.text:ppc4xx_pciex_wait_on_sdr.isra.9() The function apm821xx_pciex_init_port_hw() references the function __init ppc4xx_pciex_wait_on_sdr.isra.9(). This is often because apm821xx_pciex_init_port_hw lacks a __init annotation or the annotation of ppc4xx_pciex_wait_on_sdr.isra.9 is wrong. apm821xx_pciex_init_port_hw is only referenced by a struct in __initdata, so it should be safe to add __init to apm821xx_pciex_init_port_hw. Signed-off-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Preeti U Murthy authored
When the guest cedes the vcpu or the vcpu has no guest to run it naps. Clear the runlatch bit of the vcpu before napping to indicate an idle cpu. Signed-off-by:
Preeti U Murthy <preeti@linux.vnet.ibm.com> Acked-by:
Paul Mackerras <paulus@samba.org> Reviewed-by:
-
Preeti U Murthy authored
The secondary threads in the core are kept offline before launching guests in kvm on powerpc: "371fefd6:KVM: PPC: Allow book3s_hv guests to use SMT processor modes." Hence their runlatch bits are cleared. When the secondary threads are called in to start a guest, their runlatch bits need to be set to indicate that they are busy. The primary thread has its runlatch bit set though, but there is no harm in setting this bit once again. Hence set the runlatch bit for all threads before they start guest. Signed-off-by:
-
Preeti U Murthy authored
Up until now we have been setting the runlatch bits for a busy CPU and clearing it when a CPU enters idle state. The runlatch bit has thus been consistent with the utilization of a CPU as long as the CPU is online. However when a CPU is hotplugged out the runlatch bit is not cleared. It needs to be cleared to indicate an unused CPU. Hence this patch has the runlatch bit cleared for an offline CPU just before entering an idle state and sets it immediately after it exits the idle state. Signed-off-by:
-
Li Zhong authored
While testing memory hot-remove, I found following dead lock: Process #1141 is drmgr, trying to remove some memory, i.e. memory499. It holds the memory_hotplug_mutex, and blocks when trying to remove file "online" under dir memory499, in kernfs_drain(), at wait_event(root->deactivate_waitq, atomic_read(&kn->active) == KN_DEACTIVATED_BIAS); Process #1120 is trying to online memory499 by echo 1 > memory499/online In .kernfs_fop_write, it uses kernfs_get_active() to increase &kn->active, thus blocking process #1141. While itself is blocked later when trying to acquire memory_hotplug_mutex, which is held by process The backtrace of both processes are shown below: [<c000000001b18600>] 0xc000000001b18600 [<c000000000015044>] .__switch_to+0x144/0x200 [<c000000000263ca4>] .online_pages+0x74/0x7b0 [<c00000000055b40c>] .memory_subsys_online+0x9c/0x150 [<c00000000053cbe8>] .device_online+0xb8/0x120 [<c00000000053cd04>] .online_store+0xb4/0xc0 [<c000000000538ce4>] .dev_attr_store+0x64/0xa0 [<c00000000030f4ec>] .sysfs_kf_write+0x7c/0xb0 [<c00000000030e574>] .kernfs_fop_write+0x154/0x1e0 [<c000000000268450>] .vfs_write+0xe0/0x260 [<c000000000269144>] .SyS_write+0x64/0x110 [<c000000000009ffc>] syscall_exit+0x0/0x7c [<c000000001b18600>] 0xc000000001b18600 [<c000000000015044>] .__switch_to+0x144/0x200 [<c00000000030be14>] .__kernfs_remove+0x204/0x300 [<c00000000030d428>] .kernfs_remove_by_name_ns+0x68/0xf0 [<c00000000030fb38>] .sysfs_remove_file_ns+0x38/0x60 [<c000000000539354>] .device_remove_attrs+0x54/0xc0 [<c000000000539fd8>] .device_del+0x158/0x250 [<c00000000053a104>] .device_unregister+0x34/0xa0 [<c00000000055bc14>] .unregister_memory_section+0x164/0x170 [<c00000000024ee18>] .__remove_pages+0x108/0x4c0 [<c00000000004b590>] .arch_remove_memory+0x60/0xc0 [<c00000000026446c>] .remove_memory+0x8c/0xe0 [<c00000000007f9f4>] .pseries_remove_memblock+0xd4/0x160 [<c00000000007fcfc>] .pseries_memory_notifier+0x27c/0x290 [<c0000000008ae6cc>] .notifier_call_chain+0x8c/0x100 [<c0000000000d858c>] .__blocking_notifier_call_chain+0x6c/0xe0 [<c00000000071ddec>] .of_property_notify+0x7c/0xc0 [<c00000000071ed3c>] .of_update_property+0x3c/0x1b0 [<c0000000000756cc>] .ofdt_write+0x3dc/0x740 [<c0000000002f60fc>] .proc_reg_write+0xac/0x110 [<c000000000268450>] .vfs_write+0xe0/0x260 [<c000000000269144>] .SyS_write+0x64/0x110 [<c000000000009ffc>] syscall_exit+0x0/0x7c This patch uses lock_device_hotplug() to protect remove_memory() called in pseries_remove_memblock(), which is also stated before function remove_memory(): * NOTE: The caller must call lock_device_hotplug() to serialize hotplug * and online/offline operations before this call, as required by * try_offline_node(). */ void __ref remove_memory(int nid, u64 start, u64 size) With this lock held, the other process(#1120 above) trying to online the memory block will retry the system call when calling lock_device_hotplug_sysfs(), and finally find No such device error. Signed-off-by:Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by:
-
Anton Blanchard authored
module_init should return 0 or a negative errno. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
Bump the boot wrapper BOOT_COMMAND_LINE_SIZE to match the kernel. Signed-off-by:
-
Anton Blanchard authored
I've had a report that the current limit is too small for an automated network based installer. Bump it. Signed-off-by:
-
Anton Blanchard authored
We have two definitions of COMMAND_LINE_SIZE, one for the kernel and one for the boot wrapper. I assume this is so the boot wrapper can be self sufficient and not rely on kernel headers. Having two defines with the same name is confusing, I just updated the wrong one when trying to bump it. Make the boot wrapper define unique by calling it BOOT_COMMAND_LINE_SIZE. Signed-off-by:
-
Cody P Schafer authored
The catalog version number was changed from a be32 (with proceeding 32bits of padding) to a be64, update the code to treat it as a be64 Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by:
-
Cody P Schafer authored
Signed-off-by:
-
Cody P Schafer authored
Signed-off-by:
-
Cody P Schafer authored
Signed-off-by:
-
