- 14 Jan, 2021 1 commit
-
-
Chris Chiu authored
The Acer Apire E5-575T laptop with codec ALC255 has a terrible background noise comes from internal mic capture. And the jack sensing dose not work for headset like some other Acer laptops. This patch limits the internal mic boost on top of the existing ALC255_FIXUP_ACER_MIC_NO_PRESENCE quirk for Acer Aspire E5-575T. Signed-off-by:
Chris Chiu <chiu@endlessos.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210114082728.74729-1-chiu@endlessos.orgSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 13 Jan, 2021 2 commits
-
-
Takashi Iwai authored
Since the commit 5a6c3e11 ("ALSA: usb-audio: Add hw constraint for implicit fb sync"), we apply the hw constraints for the implicit feedback sync to make the secondary open aligned with the already opened stream setup. This change assumed that the secondary open is performed after the first stream has been already set up, and adds the hw constraints to sync with the first stream's parameters only when the EP setup for the first stream was confirmed at the open time. However, most of applications handling the full-duplex operations do open both playback and capture streams at first, then set up both streams. This results in skipping the additional hw constraints since the counter-part stream hasn't been set up yet at the open of the second stream, and it eventually leads to "incompatible EP" error in the end. This patch corrects the behavior by always applying the hw constraints for the implicit fb sync. The hw constraint rules are defined so that they check the sync EP dynamically at each invocation, instead. This covers the concurrent stream setups better and lets the hw refine calls resolving to the right configuration. Also this patch corrects a minor error that has existed in the debug print that isn't built as default. Fixes: 5a6c3e11 ("ALSA: usb-audio: Add hw constraint for implicit fb sync") Link: https://lore.kernel.org/r/20210111081611.12790-1-tiwai@suse.deSigned-off-by:
-
Kai Vehmanen authored
Add HD Audio PCI ID and HDMI codec vendor ID for Intel AlderLake-P. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210113155629.4097057-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
- 12 Jan, 2021 6 commits
-
-
Alex Deucher authored
We are able to power down the GPU and audio via the GPU driver so flag these asics as supporting runtime pm. Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20210105175245.963451-1-alexander.deucher@amd.comSigned-off-by:
-
Geert Uytterhoeven authored
As snd_fw_async_midi_port.consume_bytes is unsigned int, and NSEC_PER_SEC is 1000000000L, the second multiplication in port->consume_bytes * 8 * NSEC_PER_SEC / 31250 always overflows on 32-bit platforms, truncating the result. Fix this by precalculating "NSEC_PER_SEC / 31250", which is an integer constant. Note that this assumes port->consume_bytes <= 16777. Fixes: 531f4718 ("ALSA: firewire-lib/firewire-tascam: localize async midi port") Reviewed-by:Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210111130251.361335-3-geert+renesas@glider.beSigned-off-by:
-
Geert Uytterhoeven authored
As snd_ff.rx_bytes[] is unsigned int, and NSEC_PER_SEC is 1000000000L, the second multiplication in ff->rx_bytes[port] * 8 * NSEC_PER_SEC / 31250 always overflows on 32-bit platforms, truncating the result. Fix this by precalculating "NSEC_PER_SEC / 31250", which is an integer constant. Note that this assumes ff->rx_bytes[port] <= 16777. Fixes: 19174295 ("ALSA: fireface: add transaction support") Reviewed-by: -
Peter Geis authored
Currently hda on tegra30 fails to open a stream with an input/output error. For example: speaker-test -Dhw:0,3 -c 2 speaker-test 1.2.2 Playback device is hw:0,3 Stream parameters are 48000Hz, S16_LE, 2 channels Using 16 octaves of pink noise Rate set to 48000Hz (requested 48000Hz) Buffer size range from 64 to 16384 Period size range from 32 to 8192 Using max buffer size 16384 Periods = 4 was set period_size = 4096 was set buffer_size = 16384 0 - Front Left Write error: -5,Input/output error xrun_recovery failed: -5,Input/output error Transfer failed: Input/output error The tegra-hda device was introduced in tegra30 but only utilized in tegra124 until recent chips. Tegra210/186 work only due to a hardware change. For this reason it is unknown when this issue first manifested. Discussions with the hardware team show this applies to all current tegra chips. It has been resolved in the tegra234, which does not have hda support at this time. The explanation from the hardware team is this: Below is the striping formula referenced from HD audio spec. { ((num_channels * bits_per_sample) / number of SDOs) >= 8 } The current issue is seen because Tegra HW has a problem with boundary condition (= 8) for striping. The reason why it is not seen on Tegra210/Tegra186 is because it uses max 2SDO lines. Max SDO lines is read from GCAP register. For the given stream (channels = 2, bps = 16); ratio = (channels * bps) / NSDO = 32 / NSDO; On Tegra30, ratio = 32/4 = 8 (FAIL) On Tegra210/186, ratio = 32/2 = 16 (PASS) On Tegra194, ratio = 32/4 = 8 (FAIL) ==> Earlier workaround was applied for it If Tegra210/186 is forced to use 4SDO, it fails there as well. So the behavior is consistent across all these chips. Applying the fix in [1] universally resolves this issue on tegra30-hda. Tested on the Ouya game console and the tf201 tablet. [1] commit 60019d8c ("ALSA: hda/tegra: workaround playback failure on Tegra194") Reviewed-by:Jon Hunter <jonathanh@nvidia.com> Tested-by:
Ion Agorria <ion@agorria.com> Reviewed-by:
Sameer Pujar <spujar@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20210108135913.2421585-3-pgwipeout@gmail.comSigned-off-by:
-
Peter Geis authored
Current implementation defaults the hda clocks to clk_m. This causes hda to run too slow to operate correctly. Fix this by defaulting to pll_p and setting the frequency to the correct rate. This matches upstream t124 and downstream t30. Acked-by:
-
Jonathan Neuschäfer authored
MIXART.txt has been converted to ReST and renamed. Fix the reference in alsa-configuration.rst. Fixes: 3d8e8186 ("ALSA: doc: ReSTize MIXART.txt") Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210101221942.1068388-1-j.neuschaefer@gmx.netSigned-off-by:
-
- 08 Jan, 2021 5 commits
-
-
Takashi Iwai authored
Pioneer devices have both playback and capture streams sharing the same iface/altsetting, and those need to be paired as implicit feedback. Instead of a half-baked (and broken) static quirk entry, set up more generically for those devices by checking the number of endpoints and the attribute of the secondary EP. Fixes: bf6313a0 ("ALSA: usb-audio: Refactor endpoint management") Reported-by:
František Kučera <konference@frantovo.cz> Link: https://lore.kernel.org/r/20210108075219.21463-6-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
There are devices that have multiple endpoints sharing the same iface/altset not only for sync but also for the actual streams, and the audioformat for such an endpoint needs to be handled with the proper endpoint index; otherwise it confuses the endpoint management. This patch extends the audioformat to annotate the endpoint index, and put the proper ep_idx=1 to Pioneer device quirk entries accordingly. Fixes: bf6313a0 ("ALSA: usb-audio: Refactor endpoint management") Link: https://lore.kernel.org/r/20210108075219.21463-5-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The current endpoint handling assumed (more or less) a unique 1:1 relation between the endpoint and the iface/altset. The exception was the sync EP without the implicit feedback which has usually the secondary EP of the same altset. This works fine for most devices, but it turned out that some unusual devices like Pinoeer's ones have both playback and capture endpoints in the same iface/altsetting and use both for the implicit feedback mode. For handling such a case, we need to extend the endpoint management to take the shared interface into account. This patch does that: it adds a new object snd_usb_iface_ref for managing the reference counts of the each USB interface that is used by each endpoint. The interface setup is performed only once for the (sharing) endpoints, and the doubly initialization is avoided. Along with this, the resource release of endpoints and interface refcounts are put into a single function, snd_usb_endpoint_free_all() instead of looping in the caller side. Fixes: bf6313a0 ("ALSA: usb-audio: Refactor endpoint management") Link: https://lore.kernel.org/r/20210108075219.21463-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The implicit feedback mode needs to handle two endpoints and the choice of the audioformat object for the sync EP is important since this determines the compatibility of the hw_params. The current code uses the same audioformat object if both the main EP and the sync EP point to the same iface/altsetting. This was done in consideration of the non-implicit-fb sync EP handling, and it doesn't match well with the cases where actually to endpoints are defined in the sameiface / altsetting like a few Pioneer devices. Modify snd_usb_find_implicit_fb_sync_format() to pick up the audioformat that is assigned in the counter-part substreams primarily, so that the actual capture stream can be opened properly. We keep the same audioformat object only as a fallback in case nothing found, though. Fixes: 9fddc15e ("ALSA: usb-audio: Factor out the implicit feedback quirk code") Link: https://lore.kernel.org/r/20210108075219.21463-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The recent change in the endpoint management moved the endpoint object creation from the stream open time to the parser of the audio descriptor. It works fine for the standard audio, but it overlooked the other places that create audio streams via quirks (QUIRK_AUDIO_FIXED_ENDPOINT) like the reported a few Pioneer devices; those call snd_usb_add_audio_stream() manually, hence they miss the endpoints, eventually resulting in the error at opening streams. Moreover, now the sync EP setup was moved to the explicit call of snd_usb_audioformat_set_sync_ep(), and this needs to be added for those places, too. This patch addresses those regressions for quirks. It adds a local helper function add_audio_stream_from_fixed_fmt(), which does the all needed tasks, and replaces the calls of snd_usb_add_audio_stream() with this new function. Fixes: 54cb3190 ("ALSA: usb-audio: Create endpoint objects at parsing phase") Reported-by:
-
- 07 Jan, 2021 2 commits
-
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.11-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.11 A collection of mostly driver specific fixes, plus a maintainership update for TI and a fix for DAPM driver removal paths.
-
Jeremy Szu authored
* The HP ZBook Fury 15/17 G7 Mobile Workstation are using ALC285 codec which is using 0x04 to control mute LED and 0x01 to control micmute LED. * The right channel speaker is no sound and it needs to expose GPIO1 for initialing AMP. Add quirks to support them. Signed-off-by:
Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210106130549.100532-1-jeremy.szu@canonical.comSigned-off-by:
-
- 04 Jan, 2021 1 commit
-
-
Takashi Iwai authored
Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that looses the power state of some nodes after the runtime resume. This was worked around by disabling the default runtime PM via a denylist entry. Since 5.10.x made the runtime PM applied (casually) even though it's disabled in the denylist, this problem was revisited. The result was that disabling power_save_node feature suffices for the runtime PM problem. This patch implements the disablement of power_save_node feature in VIA codec for the device. It also drops the former denylist entry, too, as the runtime PM should work in the codec side properly now. Fixes: b529ef24 ("ALSA: hda: Add Clevo W35xSS_370SS to the power_save blacklist") Reported-by:
Christian Labisch <clnetbox@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210104153046.19993-1-tiwai@suse.deSigned-off-by:
-
- 03 Jan, 2021 1 commit
-
-
Timon Reinold authored
BOSS RC-505 (shown by lsusb as "Roland Corp. RC-505") does require the same quirk as these other BOSS devices. Without this quirk it is neither possible to capture audio from nor to write audio to the RC-505. Both just result in an empty audio stream. With these changes both capture and playback seem to work quite fine. MIDI funtionality was not tested. Tested-by:
Harry Reinold <harry.reinold@posteo.de> Signed-off-by:
Timon Reinold <tirei@agon.one> Link: https://lore.kernel.org/r/20210102210835.21268-1-tirei@agon.oneSigned-off-by:
-
- 01 Jan, 2021 1 commit
-
-
Takashi Iwai authored
The silent_stream_disable() function introduced by the commit b1a50397 ("ALSA: hda/hdmi: fix silent stream for first playback to DP") takes the per_pin->lock mutex, but it unlocks the wrong one, spec->pcm_lock, which causes a deadlock. This patch corrects it. Fixes: b1a50397 ("ALSA: hda/hdmi: fix silent stream for first playback to DP") Reported-by:
Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: <stable@vger.kernel.org> Acked-by:
-
- 31 Dec, 2020 4 commits
-
-
Kai-Heng Feng authored
HP EliteBook 850 G7 uses the same GPIO pins as ALC285_FIXUP_HP_GPIO_LED to enable mute and micmute LED. So apply the quirk to enable the LEDs. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201230125636.45028-1-kai.heng.feng@canonical.comSigned-off-by:
-
PeiSen Hou authored
Add two "Intel Reference boad" SSID in the alc256. Enable "power saving mode" and Enable "headset jack mode". Signed-off-by:
PeiSen Hou <pshou@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/5978d2267f034c28973d117925ec9c63@realtek.comSigned-off-by:
-
Manuel Jiménez authored
HP Pavilion 13-bb0000 (SSID 103c:87c8) needs the same quirk as other models with ALC287. Signed-off-by:
Manuel Jiménez <mjbfm99@me.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/X+s/gKNydVrI6nLj@HP-Pavilion-13Signed-off-by:
-
bo liu authored
The current kernel does not support the cx11970 codec chip. Add a codec configuration item to kernel. [ Minor coding style fix by tiwai ] Signed-off-by:
bo liu <bo.liu@senarytech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201229035226.62120-1-bo.liu@senarytech.comSigned-off-by:
-
- 29 Dec, 2020 1 commit
-
-
Takashi Iwai authored
BOSS AD-10 requires the very same quirk like other BOSS devices to enable the special implicit feedback mode. Reported-and-tested-by:
Martin Passing <martin@passing.name> Link: https://lore.kernel.org/r/20201229083428.20467-1-tiwai@suse.deSigned-off-by:
-
- 28 Dec, 2020 4 commits
-
-
Jaroslav Kysela authored
The ThinkPad X395 latop does not have the internal digital microphone connected to the AMD's ACP bridge, but it's advertised via BIOS. The internal microphone is connected to the HDA codec. Use DMI to block the microphone PCM device for this platform. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1892115 Cc: <stable@kernel.org> Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20201227164109.269973-1-perex@perex.czSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Ravulapati Vishnu vardhan rao authored
When we try to play and capture simultaneously we see that interrupts are genrated but our handler is not being acknowledged, After investigating further more in detail on this issue we found that IRQ delivery via MSI from the ACP IP is unreliable and so sometimes interrupt generated will not be acknowledged so MSI model shouldn't be used and using legacy IRQs will resolve interrupt handling issue. This patch replaces MSI interrupt handling with legacy IRQ model. Issue can be reproduced easily by running below python script: import subprocess import time import threading def do2(): cmd = 'aplay -f dat -D hw:2,1 /dev/zero -d 1' subprocess.call(cmd, stdin=subprocess.PIPE, stderr=subprocess.PIPE, shell=True) print('Play Done') def run(): for i in range(1000): do2() def do(i): cmd = 'arecord -f dat -D hw:2,2 /dev/null -d 1' subprocess.call(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE, shell=True) print(datetime.datetime.now(), i) t = threading.Thread(target=run) t.start() for i in range(1000): do(i) t.join() After applying this patch issue is resolved. Signed-off-by:Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/20201222115929.11222-1-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by:
-
Jaroslav Kysela authored
The ThinkPad E14 Gen 2 latop does not have the internal digital microphone connected to the AMD's ACP bridge, but it's advertised via BIOS. The internal microphone is connected to the HDA codec. Use DMI to block the microphone PCM device for this platform. Reported-by:
Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by:
-
Mark Brown authored
Linux 5.11-rc1
-
- 27 Dec, 2020 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Since commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") we've required that file operation structures explicitly enable splice support, rather than falling back to the default handlers. Most /proc files use the indirect 'struct proc_ops' to describe their file operations, and were fixed up to support splice earlier in commits 40be821d..b24c30c6, but the mountinfo files interact with the VFS directly using their own 'struct file_operations' and got missed as a result. This adds the necessary support for splice to work for /proc/*/mountinfo and friends. Reported-by:
Joan Bruguera Micó <joanbrugueram@gmail.com> Reported-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason: "Bug fix for IDT NTB and Intel NTB LTR management support" * tag 'ntb-5.11' of git://github.com/jonmason/ntb: ntb: intel: add Intel NTB LTR vendor support for gen4 NTB ntb: idt: fix error check in ntb_hw_idt.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "Fix a number of autobuild failures due to missing Kconfig dependencies" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - add CRYPTO_AES to Kconfig dependencies crypto: keembay - Add dependency on HAS_IOMEM crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Ingo Molnar: "Fix a segfault that occurs when built with Clang" * tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix seg fault with Clang non-section symbols
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: "Misc fixes/updates: - Fix static keys usage in module __init sections - Add separate MAINTAINERS entry for static branches/calls - Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing" * tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: softirq: Avoid bad tracing / lockdep interaction jump_label/static_call: Add MAINTAINERS jump_label: Fix usage in module __init
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "Update/fix two CPU sanity checks in the hotplug and the boot code, and fix a typo in the Kconfig help text. [ Context: the first two commits are the result of an ongoing annotation+review work of (intentional) tick_do_timer_cpu() data races reported by KCSAN, but the annotations aren't fully cooked yet ]" * tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill" tick/sched: Remove bogus boot "safety" check tick: Remove pointless cpu valid check in hotplug code -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a context switch performance regression" * tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Optimize finish_lock_switch()
-
- 26 Dec, 2020 4 commits
-
-
Linus Torvalds authored
Commit c9a3c4e6 ("mfd: ab8500-debugfs: Remove extraneous curly brace") removed a left-over curly brace that caused build failures, but Joe Perches points out that the subsequent 'seq_putc()' should also be removed, because the commit that caused all these problems already added the final '\n' to the seq_printf() above it. Reported-by:
Joe Perches <joe@perches.com> Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Fix a tegra enumeration regression (Rob Herring) - Fix a designware-host check that warned on *success*, not failure (Alexander Lobakin) * tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dwc: Fix inverted condition of DMA mask setup warning PCI: tegra: Fix host link initialization
-
Nathan Chancellor authored
Clang errors: drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type] } ^ drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '(' return 0; ^ drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}') } ^ 3 errors generated. The cleanup in ab8500_interrupts_show left a curly brace around, remove it to fix the error. Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Alexander Lobakin authored
Commit 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask for MSI message mapping, but for now it throws a warning on ret == 0, while dma_set_mask() returns 0 in case of success. Fix this by inverting the condition. [bhelgaas: join string to make it greppable] Fixes: 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.meSigned-off-by:
Alexander Lobakin <alobakin@pm.me> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
