- 05 Oct, 2019 40 commits
-
-
Sean Christopherson authored
commit 16cfacc8 upstream. Manually generate the PDPTR reserved bit mask when explicitly loading PDPTRs. The reserved bits that are being tracked by the MMU reflect the current paging mode, which is unlikely to be PAE paging in the vast majority of flows that use load_pdptrs(), e.g. CR0 and CR4 emulation, __set_sregs(), etc... This can cause KVM to incorrectly signal a bad PDPTR, or more likely, miss a reserved bit check and subsequently fail a VM-Enter due to a bad VMCS.GUEST_PDPTR. Add a one off helper to generate the reserved bits instead of sharing code across the MMU's calculations and the PDPTR emulation. The PDPTR reserved bits are basically set in stone, and pushing a helper into the MMU's calculation adds unnecessary complexity without improving readability. Oppurtunistically fix/update the comment for load_pdptrs(). Note, the buggy commit also introduced a deliberate functional change, "Also remove bit 5-6 from rsvd_bits_mask per latest SDM.", which was effectively (and correctly) reverted by commit cd9ae5fe ("KVM: x86: Fix page-tables reserved bits"). A bit of SDM archaeology shows that the SDM from late 2008 had a bug (likely a copy+paste error) where it listed bits 6:5 as AVL and A for PDPTEs used for 4k entries but reserved for 2mb entries. I.e. the SDM contradicted itself, and bits 6:5 are and always have been reserved. Fixes: 20c466b5 ("KVM: Use rsvd_bits_mask in load_pdptrs()") Cc: stable@vger.kernel.org Cc: Nadav Amit <nadav.amit@gmail.com> Reported-by:
Doug Reiland <doug.reiland@intel.com> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Dakinevich authored
commit c8848cee upstream. x86_emulate_instruction() takes into account ctxt->have_exception flag during instruction decoding, but in practice this flag is never set in x86_decode_insn(). Fixes: 6ea6e843 ("KVM: x86: inject exceptions produced by x86_decode_insn") Cc: stable@vger.kernel.org Cc: Denis Lunev <den@virtuozzo.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Signed-off-by:
Jan Dakinevich <jan.dakinevich@virtuozzo.com> Signed-off-by:
-
Jan Dakinevich authored
commit 8530a79c upstream. inject_emulated_exception() returns true if and only if nested page fault happens. However, page fault can come from guest page tables walk, either nested or not nested. In both cases we should stop an attempt to read under RIP and give guest to step over its own page fault handler. This is also visible when an emulated instruction causes a #GP fault and the VMware backdoor is enabled. To handle the VMware backdoor, KVM intercepts #GP faults; with only the next patch applied, x86_emulate_instruction() injects a #GP but returns EMULATE_FAIL instead of EMULATE_DONE. EMULATE_FAIL causes handle_exception_nmi() (or gp_interception() for SVM) to re-inject the original #GP because it thinks emulation failed due to a non-VMware opcode. This patch prevents the issue as x86_emulate_instruction() will return EMULATE_DONE after injecting the #GP. Fixes: 6ea6e843 ("KVM: x86: inject exceptions produced by x86_decode_insn") Cc: stable@vger.kernel.org Cc: Denis Lunev <den@virtuozzo.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Signed-off-by:
-
Helge Deller authored
commit 5fa16591 upstream. The HP Dino PCI controller chip can be used in two variants: as on-board controller (e.g. in B160L), or on an Add-On card ("Card-Mode") to bridge PCI components to systems without a PCI bus, e.g. to a HSC/GSC bus. One such Add-On card is the HP HSC-PCI Card which has one or more DEC Tulip PCI NIC chips connected to the on-card Dino PCI controller. Dino in Card-Mode has a big disadvantage: All PCI memory accesses need to go through the DINO_MEM_DATA register, so Linux drivers will not be able to use the ioremap() function. Without ioremap() many drivers will not work, one example is the tulip driver which then simply crashes the kernel if it tries to access the ports on the HP HSC card. This patch disables the HP HSC card if it finds one, and as such fixes the kernel crash on a HP D350/2 machine. Signed-off-by:
Helge Deller <deller@gmx.de> Noticed-by:
Phil Scarr <phil.scarr@pm.me> Cc: stable@vger.kernel.org Signed-off-by:
-
Vasily Averin authored
commit d5880c7a upstream. unlock_page() was missing in case of an already in-flight write against the same page. Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Fixes: ff17be08 ("fuse: writepage: skip already in flight") Cc: <stable@vger.kernel.org> # v3.13 Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Madhavan Srinivasan authored
commit 41ba17f2 upstream. Commit <684d9840> ('powerpc/powernv: Add debugfs interface for imc-mode and imc') added debugfs interface for the nest imc pmu devices to support changing of different ucode modes. Primarily adding this capability for debug. But when doing so, the code did not consider the case of cpu-less nodes. So when reading the _cmd_ or _mode_ file of a cpu-less node will create this crash. Faulting instruction address: 0xc0000000000d0d58 Oops: Kernel access of bad area, sig: 11 [#1] ... CPU: 67 PID: 5301 Comm: cat Not tainted 5.2.0-rc6-next-20190627+ #19 NIP: c0000000000d0d58 LR: c00000000049aa18 CTR:c0000000000d0d50 REGS: c00020194548f9e0 TRAP: 0300 Not tainted (5.2.0-rc6-next-20190627+) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:28022822 XER: 00000000 CFAR: c00000000049aa14 DAR: 000000000003fc08 DSISR:40000000 IRQMASK: 0 ... NIP imc_mem_get+0x8/0x20 LR simple_attr_read+0x118/0x170 Call Trace: simple_attr_read+0x70/0x170 (unreliable) debugfs_attr_read+0x6c/0xb0 __vfs_read+0x3c/0x70 vfs_read+0xbc/0x1a0 ksys_read+0x7c/0x140 system_call+0x5c/0x70 Patch fixes the issue with a more robust check for vbase to NULL. Before patch, ls output for the debugfs imc directory # ls /sys/kernel/debug/powerpc/imc/ imc_cmd_0 imc_cmd_251 imc_cmd_253 imc_cmd_255 imc_mode_0 imc_mode_251 imc_mode_253 imc_mode_255 imc_cmd_250 imc_cmd_252 imc_cmd_254 imc_cmd_8 imc_mode_250 imc_mode_252 imc_mode_254 imc_mode_8 After patch, ls output for the debugfs imc directory # ls /sys/kernel/debug/powerpc/imc/ imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8 Actual bug here is that, we have two loops with potentially different loop counts. That is, in imc_get_mem_addr_nest(), loop count is obtained from the dt entries. But in case of export_imc_mode_and_cmd(), loop was based on for_each_nid() count. Patch fixes the loop count in latter based on the struct mem_info. Ideally it would be better to have array size in struct imc_pmu. Fixes: 684d9840 ('powerpc/powernv: Add debugfs interface for imc-mode and imc') Reported-by:
Qian Cai <cai@lca.pw> Suggested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Ming Lei authored
[ Upstream commit b7e9e1fb ] Implement .cleanup_rq() callback for freeing driver private part of the request. Then we can avoid to leak this part if the request isn't completed by SCSI, and freed by blk-mq or upper layer(such as dm-rq) finally. Cc: Ewan D. Milne <emilne@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: <stable@vger.kernel.org> Fixes: 396eaf21 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ming Lei authored
[ Upstream commit 226b4fc7 ] SCSI maintains its own driver private data hooked off of each SCSI request, and the pridate data won't be freed after scsi_queue_rq() returns BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE. An upper layer driver (e.g. dm-rq) may need to retry these SCSI requests, before SCSI has fully dispatched them, due to a lower level SCSI driver's resource limitation identified in scsi_queue_rq(). Currently SCSI's per-request private data is leaked when the upper layer driver (dm-rq) frees and then retries these requests in response to BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE returns from scsi_queue_rq(). This usecase is so specialized that it doesn't warrant training an existing blk-mq interface (e.g. blk_mq_free_request) to allow SCSI to account for freeing its driver private data -- doing so would add an extra branch for handling a special case that all other consumers of SCSI (and blk-mq) won't ever need to worry about. So the most pragmatic way forward is to delegate freeing SCSI driver private data to the upper layer driver (dm-rq). Do so by adding new .cleanup_rq callback and calling a new blk_mq_cleanup_rq() method from dm-rq. A following commit will implement the .cleanup_rq() hook in scsi_mq_ops. Cc: Ewan D. Milne <emilne@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: <stable@vger.kernel.org> Fixes: 396eaf21 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback") Signed-off-by:
-
Jan-Marek Glogowski authored
[ Upstream commit bd9c10bc ] The laptop has a combined jack to attach headsets on the right. The BIOS encodes them as two different colored jacks at the front, but otherwise it seems to be configured ok. But any adaption of the pins config on its own doesn't fix the jack detection to work in Linux. Still Windows works correct. This is somehow fixed by chaining ALC256_FIXUP_ASUS_HEADSET_MODE, which seems to register the microphone jack as a headset part and also results in fixing jack sensing, visible in dmesg as: -snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 +snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ Actually the essential change is the location of the jack; the driver created "Front Mic Jack" without the matching volume / mute control element due to its jack location, which confused PA. -- tiwai ] Signed-off-by:
Jan-Marek Glogowski <glogow@fbihome.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/8f4f9b20-0aeb-f8f1-c02f-fd53c09679f1@fbihome.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Yan, Zheng authored
[ Upstream commit 87bc5b89 ] remove_session_caps() relies on __wait_on_freeing_inode(), to wait for freeing inode to remove its caps. But VFS wakes freeing inode waiters before calling destroy_inode(). [ jlayton: mainline moved to ->free_inode before the original patch was merged. This backport reinstates ceph_destroy_inode and just has it do the call_rcu call. ] Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/40102Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Sasha Levin authored
This reverts commit 81281039. The backport was incorrect and was causing kernel panics. Revert and re-apply a correct backport from Jeff Layton. Signed-off-by:
-
Joonwon Kang authored
commit 60f2c82e upstream. While no uses in the kernel triggered this case, it was possible to have a false negative where a struct contains other structs which contain only function pointers because of unreachable code in is_pure_ops_struct(). Signed-off-by:
Joonwon Kang <kjw1627@gmail.com> Link: https://lore.kernel.org/r/20190727155841.GA13586@host Fixes: 313dd1b6 ("gcc-plugins: Add the randstruct plugin") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Ira Weiny authored
commit f8659d68 upstream. Define the working variables to be unsigned long to be compatible with for_each_set_bit and change types as needed. While we are at it remove unused variables from a couple of functions. This was found because of the following KASAN warning: ================================================================== BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70 Read of size 8 at addr ffff888362d778d0 by task kworker/u308:2/1889 CPU: 21 PID: 1889 Comm: kworker/u308:2 Tainted: G W 5.3.0-rc2-mm1+ #2 Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.02.04.0003.102320141138 10/23/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] Call Trace: dump_stack+0x9a/0xf0 ? find_first_bit+0x19/0x70 print_address_description+0x6c/0x332 ? find_first_bit+0x19/0x70 ? find_first_bit+0x19/0x70 __kasan_report.cold.6+0x1a/0x3b ? find_first_bit+0x19/0x70 kasan_report+0xe/0x12 find_first_bit+0x19/0x70 pma_get_opa_portstatus+0x5cc/0xa80 [hfi1] ? ret_from_fork+0x3a/0x50 ? pma_get_opa_port_ectrs+0x200/0x200 [hfi1] ? stack_trace_consume_entry+0x80/0x80 hfi1_process_mad+0x39b/0x26c0 [hfi1] ? __lock_acquire+0x65e/0x21b0 ? clear_linkup_counters+0xb0/0xb0 [hfi1] ? check_chain_key+0x1d7/0x2e0 ? lock_downgrade+0x3a0/0x3a0 ? match_held_lock+0x2e/0x250 ib_mad_recv_done+0x698/0x15e0 [ib_core] ? clear_linkup_counters+0xb0/0xb0 [hfi1] ? ib_mad_send_done+0xc80/0xc80 [ib_core] ? mark_held_locks+0x79/0xa0 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? rvt_poll_cq+0x1e1/0x340 [rdmavt] __ib_process_cq+0x97/0x100 [ib_core] ib_cq_poll_work+0x31/0xb0 [ib_core] process_one_work+0x4ee/0xa00 ? pwq_dec_nr_in_flight+0x110/0x110 ? do_raw_spin_lock+0x113/0x1d0 worker_thread+0x57/0x5a0 ? process_one_work+0xa00/0xa00 kthread+0x1bb/0x1e0 ? kthread_create_on_node+0xc0/0xc0 ret_from_fork+0x3a/0x50 The buggy address belongs to the page: page:ffffea000d8b5dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x17ffffc0000000() raw: 0017ffffc0000000 0000000000000000 ffffea000d8b5dc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected addr ffff888362d778d0 is located in stack of task kworker/u308:2/1889 at offset 32 in frame: pma_get_opa_portstatus+0x0/0xa80 [hfi1] this frame has 1 object: [32, 36) 'vl_select_mask' Memory state around the buggy address: ffff888362d77780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888362d77800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888362d77880: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 00 00 ^ ffff888362d77900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888362d77980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 ================================================================== Cc: <stable@vger.kernel.org> Fixes: 77241056 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20190911113053.126040.47327.stgit@awfm-01.aw.intel.comReviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Danit Goldberg authored
commit 5d44adeb upstream. ib_add_slave_port() allocates a multiport struct but never frees it. Don't leak memory, free the allocated mpi struct during driver unload. Cc: <stable@vger.kernel.org> Fixes: 32f69e4b ("{net, IB}/mlx5: Manage port association for multiport RoCE") Link: https://lore.kernel.org/r/20190916064818.19823-3-leon@kernel.orgSigned-off-by:
Danit Goldberg <danitg@mellanox.com> Reviewed-by:
-
Vincent Whitchurch authored
commit c9dccacf upstream. kmsg_dump_get_buffer() is supposed to select all the youngest log messages which fit into the provided buffer. It determines the correct start index by using msg_print_text() with a NULL buffer to calculate the size of each entry. However, when performing the actual writes, msg_print_text() only writes the entry to the buffer if the written len is lesser than the size of the buffer. So if the lengths of the selected youngest log messages happen to precisely fill up the provided buffer, the last log message is not included. We don't want to modify msg_print_text() to fill up the buffer and start returning a length which is equal to the size of the buffer, since callers of its other users, such as kmsg_dump_get_line(), depend upon the current behaviour. Instead, fix kmsg_dump_get_buffer() to compensate for this. For example, with the following two final prints: [ 6.427502] AAAAAAAAAAAAA [ 6.427769] BBBBBBBB12345 A dump of a 64-byte buffer filled by kmsg_dump_get_buffer(), before this patch: 00000000: 3c 30 3e 5b 20 20 20 20 36 2e 35 32 32 31 39 37 <0>[ 6.522197 00000010: 5d 20 41 41 41 41 41 41 41 41 41 41 41 41 41 0a ] AAAAAAAAAAAAA. 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ After this patch: 00000000: 3c 30 3e 5b 20 20 20 20 36 2e 34 35 36 36 37 38 <0>[ 6.456678 00000010: 5d 20 42 42 42 42 42 42 42 42 31 32 33 34 35 0a ] BBBBBBBB12345. 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Link: http://lkml.kernel.org/r/20190711142937.4083-1-vincent.whitchurch@axis.com Fixes: e2ae715d ("kmsg - kmsg_dump() use iterator to receive log buffer content") To: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # v3.5+ Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Quinn Tran authored
commit 8b5292bc upstream. Relogin fails to move forward due to scan_state flag indicating device is not there. Before relogin process, Session delete process accidently modified the scan_state flag. [mkp: typos plus corrected Fixes: sha as reported by sfr] Fixes: 2dee5521 ("scsi: qla2xxx: Fix login state machine freeze") Cc: stable@vger.kernel.org Signed-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Martin Wilck authored
commit 57adf5d4 upstream. cdb in send_mode_select() is not zeroed and is only partially filled in rdac_failover_get(), which leads to some random data getting to the device. Users have reported storage responding to such commands with INVALID FIELD IN CDB. Code before commit 32782557 was not affected, as it called blk_rq_set_block_pc(). Fix this by zeroing out the cdb first. Identified & fix proposed by HPE. Fixes: 32782557 ("scsi_dh_rdac: switch to scsi_execute_req_flags()") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20190904155205.1666-1-martin.wilck@suse.comSigned-off-by:
Martin Wilck <mwilck@suse.com> Acked-by:
Ales Novak <alnovak@suse.cz> Reviewed-by:
Shane Seymour <shane.seymour@hpe.com> Signed-off-by:
-
Takashi Sakamoto authored
commit e1a00b5b upstream. 2 bytes in MSB of register for clock status is zero during intermediate state after changing status of sampling clock in models of TASCAM FireWire series. The duration of this state differs depending on cases. During the state, it's better to retry reading the register for current status of the clock. In current implementation, the intermediate state is checked only when getting current sampling transmission frequency, then retry reading. This care is required for the other operations to read the register. This commit moves the codes of check and retry into helper function commonly used for operations to read the register. Fixes: e453df44 ("ALSA: firewire-tascam: add PCM functionality") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20190910135152.29800-3-o-takashi@sakamocchi.jpSigned-off-by:
-
Takashi Sakamoto authored
commit 2617120f upstream. The return value of snd_tscm_stream_get_clock() is ignored. This commit checks the value and handle error. Fixes: e453df44 ("ALSA: firewire-tascam: add PCM functionality") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
-
Luca Coelho authored
commit fddbfeec upstream. The intention was to have the GEO_TX_POWER_LIMIT command in FW version 36 as well, but not all 8000 family got this feature enabled. The 8000 family is the only one using version 36, so skip this version entirely. If we try to send this command to the firmwares that do not support it, we get a BAD_COMMAND response from the firmware. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=204151. Cc: stable@vger.kernel.org # 4.19+ Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
MyungJoo Ham authored
[ Upstream commit 04658148 ] The recent commit of PM / devfreq: passive: Use non-devm notifiers had incurred compiler warning, "unused variable 'dev'". Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Sakari Ailus authored
[ Upstream commit e9eb103f ] The omap3isp driver registered subdevs without the dev field being set. Do that now. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit 2a28468e ] [BUG] With fuzzed image and MIXED_GROUPS super flag, we can hit the following BUG_ON(): kernel BUG at fs/btrfs/delayed-ref.c:491! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1849 Comm: sync Tainted: G O 5.2.0-custom #27 RIP: 0010:update_existing_head_ref.cold+0x44/0x46 [btrfs] Call Trace: add_delayed_ref_head+0x20c/0x2d0 [btrfs] btrfs_add_delayed_tree_ref+0x1fc/0x490 [btrfs] btrfs_free_tree_block+0x123/0x380 [btrfs] __btrfs_cow_block+0x435/0x500 [btrfs] btrfs_cow_block+0x110/0x240 [btrfs] btrfs_search_slot+0x230/0xa00 [btrfs] ? __lock_acquire+0x105e/0x1e20 btrfs_insert_empty_items+0x67/0xc0 [btrfs] alloc_reserved_file_extent+0x9e/0x340 [btrfs] __btrfs_run_delayed_refs+0x78e/0x1240 [btrfs] ? kvm_clock_read+0x18/0x30 ? __sched_clock_gtod_offset+0x21/0x50 btrfs_run_delayed_refs.part.0+0x4e/0x180 [btrfs] btrfs_run_delayed_refs+0x23/0x30 [btrfs] btrfs_commit_transaction+0x53/0x9f0 [btrfs] btrfs_sync_fs+0x7c/0x1c0 [btrfs] ? __ia32_sys_fdatasync+0x20/0x20 sync_fs_one_sb+0x23/0x30 iterate_supers+0x95/0x100 ksys_sync+0x62/0xb0 __ia32_sys_sync+0xe/0x20 do_syscall_64+0x65/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe [CAUSE] This situation is caused by several factors: - Fuzzed image The extent tree of this fs missed one backref for extent tree root. So we can allocated space from that slot. - MIXED_BG feature Super block has MIXED_BG flag. - No mixed block groups exists All block groups are just regular ones. This makes data space_info->block_groups[] contains metadata block groups. And when we reserve space for data, we can use space in metadata block group. Then we hit the following file operations: - fallocate We need to allocate data extents. find_free_extent() choose to use the metadata block to allocate space from, and choose the space of extent tree root, since its backref is missing. This generate one delayed ref head with is_data = 1. - extent tree update We need to update extent tree at run_delayed_ref time. This generate one delayed ref head with is_data = 0, for the same bytenr of old extent tree root. Then we trigger the BUG_ON(). [FIX] The quick fix here is to check block_group->flags before using it. The problem can only happen for MIXED_GROUPS fs. Regular filesystems won't have space_info with DATA|METADATA flag, and no way to hit the bug. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203255Reported-by:
Jungyeon Yoon <jungyeon.yoon@gmail.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 93d05155 ] Raven Ridge systems may have malfunction touchpad or hang at boot if incorrect IVRS IOAPIC is provided by BIOS. Users already found correct "ivrs_ioapic=" values, let's put them inside kernel to workaround buggy BIOS. BugLink: https://bugs.launchpad.net/bugs/1795292 BugLink: https://bugs.launchpad.net/bugs/1837688Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 051c78af ] Lenovo ThinkCentre M73 and M93 don't seem to have a proper beep although the driver tries to probe and set up blindly. Blacklist these machines for suppressing the beep creation. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204635Signed-off-by:
-
Tomas Bortoli authored
[ Upstream commit a10feaf8 ] The function at issue does not always initialize each byte allocated for 'b' and can therefore leak uninitialized memory to a USB device in the call to usb_bulk_msg() Use kzalloc() instead of kmalloc() Signed-off-by:
Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+0522702e9d67142379f1@syzkaller.appspotmail.com Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Ahzo authored
[ Upstream commit f659bb6d ] This fixes screen corruption/flickering on 75 Hz displays. v2: make print statement debug only (Alex) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102646Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Ahzo <Ahzo@tutanota.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit f2dbe87c ] We don't need to deal with the unsol events for Intel chips that are tied with the graphics via audio component notifier. Although the presence of the audio component is checked at the beginning of hdmi_unsol_event(), better to short cut by dropping unsol_event ops. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204565Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit e5e9a2ec ] This works around a possible stalled packet issue, which may occur due to clock recovery from the PCH being too slow, when the LAN is transitioning from K1 at 1G link speed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204057Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Kevin Easton authored
[ Upstream commit 764f3f1e ] This sentinel tells the firmware loading process when to stop. Reported-and-tested-by: syzbot+98156c174c5a2cad9f8f@syzkaller.appspotmail.com Signed-off-by:
Kevin Easton <kevin@guarana.org> Signed-off-by:
-
Nigel Croxon authored
[ Upstream commit b76b4715 ] While MD continues to count read errors returned by the lower layer. If those errors are -EILSEQ, instead of -EIO, it should NOT increase the read_errors count. When RAID6 is set up on dm-integrity target that detects massive corruption, the leg will be ejected from the array. Even if the issue is correctable with a sector re-write and the array has necessary redundancy to correct it. The leg is ejected because it runs up the rdev->read_errors beyond conf->max_nr_stripes. The return status in dm-drypt when there is a data integrity error is -EILSEQ (BLK_STS_PROTECTION). Signed-off-by:
Nigel Croxon <ncroxon@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Ulf Hansson authored
[ Upstream commit 7c526608 ] In cases when SDIO IRQs have been enabled, runtime suspend is prevented by the driver. However, this still means dw_mci_runtime_suspend|resume() gets called during system suspend/resume, via pm_runtime_force_suspend|resume(). This means during system suspend/resume, the register context of the dw_mmc device most likely loses its register context, even in cases when SDIO IRQs have been enabled. To re-enable the SDIO IRQs during system resume, the dw_mmc driver currently relies on the mmc core to re-enable the SDIO IRQs when it resumes the SDIO card, but this isn't the recommended solution. Instead, it's better to deal with this locally in the dw_mmc driver, so let's do that. Tested-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Ulf Hansson authored
[ Upstream commit bd880b00 ] To avoid each host driver supporting SDIO IRQs, from keeping track internally about if SDIO IRQs has been claimed, let's introduce a common helper function, sdio_irq_claimed(). The function returns true if SDIO IRQs are claimed, via using the information about the number of claimed irqs. This is safe, even without any locks, as long as the helper function is called only from runtime/system suspend callbacks of the host driver. Tested-by:
-
Al Cooper authored
[ Upstream commit c894e33d ] When switching from any MMC speed mode that requires 1.8v (HS200, HS400 and HS400ES) to High Speed (HS) mode, the system ends up configured for SDR12 with a 50MHz clock which is an illegal mode. This happens because the SDHCI_CTRL_VDD_180 bit in the SDHCI_HOST_CONTROL2 register is left set and when this bit is set, the speed mode is controlled by the SDHCI_CTRL_UHS field in the SDHCI_HOST_CONTROL2 register. The SDHCI_CTRL_UHS field will end up being set to 0 (SDR12) by sdhci_set_uhs_signaling() because there is no UHS mode being set. The fix is to change sdhci_set_uhs_signaling() to set the SDHCI_CTRL_UHS field to SDR25 (which is the same as HS) for any switch to HS mode. This was found on a new eMMC controller that does strict checking of the speed mode and the corresponding clock rate. It caused the switch to HS400 mode to fail because part of the sequence to switch to HS400 requires a switch from HS200 to HS before going to HS400. Suggested-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Al Cooper <alcooperx@gmail.com> Signed-off-by:
-
Ulf Hansson authored
[ Upstream commit 36d57efb ] The sdio_irq_pending flag is used to let host drivers indicate that it has signaled an IRQ. If that is the case and we only have a single SDIO func that have claimed an SDIO IRQ, our assumption is that we can avoid reading the SDIO_CCCR_INTx register and just call the SDIO func irq handler immediately. This makes sense, but the flag is set/cleared in a somewhat messy order, let's fix that up according to below. First, the flag is currently set in sdio_run_irqs(), which is executed as a work that was scheduled from sdio_signal_irq(). To make it more implicit that the host have signaled an IRQ, let's instead immediately set the flag in sdio_signal_irq(). This also makes the behavior consistent with host drivers that uses the legacy, mmc_signal_sdio_irq() API. This have no functional impact, because we don't expect host drivers to call sdio_signal_irq() until after the work (sdio_run_irqs()) have been executed anyways. Second, currently we never clears the flag when using the sdio_run_irqs() work, but only when using the sdio_irq_thread(). Let make the behavior consistent, by moving the flag to be cleared inside the common process_sdio_pending_irqs() function. Additionally, tweak the behavior of the flag slightly, by avoiding to clear it unless we processed the SDIO IRQ. The purpose with this at this point, is to keep the information about whether there have been an SDIO IRQ signaled by the host, so at system resume we can decide to process it without reading the SDIO_CCCR_INTx register. Tested-by:
-
Guoqing Jiang authored
[ Upstream commit 6ce220dd ] If stripe in batch list is set with STRIPE_HANDLE flag, then the stripe could be set with STRIPE_ACTIVE by the handle_stripe function. And if error happens to the batch_head at the same time, break_stripe_batch_list is called, then below warning could happen (the same report in [1]), it means a member of batch list was set with STRIPE_ACTIVE. [7028915.431770] stripe state: 2001 [7028915.431815] ------------[ cut here ]------------ [7028915.431828] WARNING: CPU: 18 PID: 29089 at drivers/md/raid5.c:4614 break_stripe_batch_list+0x203/0x240 [raid456] [...] [7028915.431879] CPU: 18 PID: 29089 Comm: kworker/u82:5 Tainted: G O 4.14.86-1-storage #4.14.86-1.2~deb9 [7028915.431881] Hardware name: Supermicro SSG-2028R-ACR24L/X10DRH-iT, BIOS 3.1 06/18/2018 [7028915.431888] Workqueue: raid5wq raid5_do_work [raid456] [7028915.431890] task: ffff9ab0ef36d7c0 task.stack: ffffb72926f84000 [7028915.431896] RIP: 0010:break_stripe_batch_list+0x203/0x240 [raid456] [7028915.431898] RSP: 0018:ffffb72926f87ba8 EFLAGS: 00010286 [7028915.431900] RAX: 0000000000000012 RBX: ffff9aaa84a98000 RCX: 0000000000000000 [7028915.431901] RDX: 0000000000000000 RSI: ffff9ab2bfa15458 RDI: ffff9ab2bfa15458 [7028915.431902] RBP: ffff9aaa8fb4e900 R08: 0000000000000001 R09: 0000000000002eb4 [7028915.431903] R10: 00000000ffffffff R11: 0000000000000000 R12: ffff9ab1736f1b00 [7028915.431904] R13: 0000000000000000 R14: ffff9aaa8fb4e900 R15: 0000000000000001 [7028915.431906] FS: 0000000000000000(0000) GS:ffff9ab2bfa00000(0000) knlGS:0000000000000000 [7028915.431907] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7028915.431908] CR2: 00007ff953b9f5d8 CR3: 0000000bf4009002 CR4: 00000000003606e0 [7028915.431909] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7028915.431910] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7028915.431910] Call Trace: [7028915.431923] handle_stripe+0x8e7/0x2020 [raid456] [7028915.431930] ? __wake_up_common_lock+0x89/0xc0 [7028915.431935] handle_active_stripes.isra.58+0x35f/0x560 [raid456] [7028915.431939] raid5_do_work+0xc6/0x1f0 [raid456] Also commit 59fc630b ("RAID5: batch adjacent full stripe write") said "If a stripe is added to batch list, then only the first stripe of the list should be put to handle_list and run handle_stripe." So don't set STRIPE_HANDLE to stripe which is already in batch list, otherwise the stripe could be put to handle_list and run handle_stripe, then the above warning could be triggered. [1]. https://www.spinics.net/lists/raid/msg62552.htmlSigned-off-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 2ec42f31 ] Some tools use the snd_pcm_info_get_name() to try to identify PCMs or for other purposes. Currently it is left empty with the dmaengine-pcm, in this case copy the pcm->id string as pcm->name. For example IGT is using this to find the HDMI PCM for testing audio on it. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Reported-by:
Arthur She <arthur.she@linaro.org> Link: https://lore.kernel.org/r/20190906055524.7393-1-peter.ujfalusi@ti.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
M. Vefa Bicakci authored
[ Upstream commit 7d505758 ] On a Xen-based PVH virtual machine with more than 4 GiB of RAM, intel_pmc_core fails initialization with the following warning message from the kernel, indicating that the driver is attempting to ioremap RAM: ioremap on RAM at 0x00000000fe000000 - 0x00000000fe001fff WARNING: CPU: 1 PID: 434 at arch/x86/mm/ioremap.c:186 __ioremap_caller.constprop.0+0x2aa/0x2c0 ... Call Trace: ? pmc_core_probe+0x87/0x2d0 [intel_pmc_core] pmc_core_probe+0x87/0x2d0 [intel_pmc_core] This issue appears to manifest itself because of the following fallback mechanism in the driver: if (lpit_read_residency_count_address(&slp_s0_addr)) pmcdev->base_addr = PMC_BASE_ADDR_DEFAULT; The validity of address PMC_BASE_ADDR_DEFAULT (i.e., 0xFE000000) is not verified by the driver, which is what this patch introduces. With this patch, if address PMC_BASE_ADDR_DEFAULT is in RAM, then the driver will not attempt to ioremap the aforementioned address. Signed-off-by:
M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Gayatri Kammela authored
[ Upstream commit 6e1c32c5 ] Add the model numbers/CPUIDs of Tiger Lake mobile and desktop to the Intel family. Suggested-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Harald Freudenberger authored
[ Upstream commit 9e323d45 ] With 'extra run-time crypto self tests' enabled, the selftest for s390-xts fails with alg: skcipher: xts-aes-s390 encryption unexpectedly succeeded on test vector "random: len=0 klen=64"; expected_error=-22, cfg="random: inplace use_digest nosimd src_divs=[2.61%@+4006, 84.44%@+21, 1.55%@+13, 4.50%@+344, 4.26%@+21, 2.64%@+27]" This special case with nbytes=0 is not handled correctly and this fix now makes sure that -EINVAL is returned when there is en/decrypt called with 0 bytes to en/decrypt. Signed-off-by:
Harald Freudenberger <freude@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
