Enable and configure the dispcc node on SM6125 for consumption by MDSS
later on.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-15-a3f287dd6c07@somainline.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

We have a working RPM XO clock; no other driver except rpmcc should be
parenting directly to the fixed-factor xo_board clock nor should it be
reachable by that global name.  Remove the name to that effect, so that
every clock relation is explicitly defined in DTS.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-14-a3f287dd6c07@somainline.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

This node has always resided in the wrong spot, making it somewhat
harder to contribute new node entries while maintaining proper sorting
around it.  Move the node up to sit after hsusb_phy1 where it maintains
proper numerical sorting on the (first of its many) reg address
property.

Fixes: cff4bbaf ("arm64: dts: qcom: Add support for SM6125")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-3-a3f287dd6c07@somainline.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

APPS IOMMU is the only node in sm6125.dtsi that doesn't have its
address padded to 8 hexadecimals; fix this by prepending a 0.

Fixes: 8ddb4bc3 ("arm64: dts: qcom: sm6125: Configure APPS SMMU")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-2-a3f287dd6c07@somainline.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Bindings require different order of clocks for USB DWC3 nodes (sleep
before mock_utmi).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230723141849.93078-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Bindings require different order of clocks for USB DWC3 nodes (sleep
before mock_utmi).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230723141849.93078-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

There are two entries for similar reserved memory: qseecom@cb400000 and
audio@cb400000.  Keep the qseecom as it is longer.

  Warning (unique_unit_address_if_enabled): /reserved-memory/audio@cb400000: duplicate unit-address (also used in node /reserved-memory/qseecom@cb400000)

Fixes: 69876bc6 ("arm64: dts: qcom: msm8992-libra: Fix the memory map")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230720072048.10093-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Reserved memory @6c00000 is defined in MSM8994 DTSI and few boards:

  Warning (unique_unit_address_if_enabled): /reserved-memory/reserved@6c00000: duplicate unit-address (also used in node /reserved-memory/hole2@6c00000)
  Warning (unique_unit_address_if_enabled): /reserved-memory/reserved@6c00000: duplicate unit-address (also used in node /reserved-memory/memory@6c00000)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230720072048.10093-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Modem subsystem in SDM630/660 is similar to MSM8998 and
device tree node for it is based on the one from msm8998.dtsi.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Link: https://lore.kernel.org/r/20230719093458.2668842-1-alexeymin@postmarketos.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

This property isn't used or defined anymore. Get rid of it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230714-topic-lpass_lpi_cleanup-v1-3-dc18b5bd14f7@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add proper audio routes for onboard analogue microphones: AMIC[1345].
Use also new DAPM input widget (TX SWR_INPUTn) for them, not the
deprecated ADC one.  Change is not compatible with older kernels not
having the new SWR_INPUTn input widget.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230717143824.203352-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add device node for camera clock controller on Qualcomm
SM8550 platform.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-6-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Merge the SM8550 camera clock controller through a topic branch, to get
access to the DeviceTree bindings.

Add support for camera qdss, sleep and xo clocks.
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-5-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add support for the camera clock controller for camera clients to be
able to request for camcc clocks on SM8550 platform.
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-4-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Lucid ole pll has as extra RINGOSC_CAL_L field in L register in
addition to the fields that are part of lucid evo pll, hence add
support for lucid ole pll configure function to configure the ole plls.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-3-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add device tree bindings for the camera clock controller on
Qualcomm SM8550 platform.
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-2-quic_jkona@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Fix the apps iommu local address space range as per data sheet.

Fixes: 6a6729f3 ("arm64: dts: qcom: msm8916: Add IOMMU support")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230915143304.477-1-quic_gkohli@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Describe the interconnect paths related to QUPs and add the power-domains
powering them.

This is required for icc sync_state, as otherwise QUP access is gated.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-4-9ba0a9460be2@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-11-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-10-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-9-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-8-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Use usb_1_ssphy's clock as gcc's usb3_phy_wrapper_gcc_usb30_pipe_clk
clock source.
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: 1c39e6f9 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-7-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-6-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add power-domains for cpuidle states to use psci os-initiated idle states.

Cc: devicetree@vger.kernel.org
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Link: https://lore.kernel.org/r/20230703085555.30285-4-quic_mkshah@quicinc.com
[bjorn: Corrected psci child node names to match binding]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

According to schematics the L9B regulator supplies VCCQ (already in DTS)
and the UFS controller pads (VDD_PX10, missing vdd-hba).  Add the
missing supply for full hardware description, even though it should not
have functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230906104744.163479-6-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

According to schematics the L9B regulator supplies VCCQ (already in DTS)
and the UFS controller pads (VDD_PX10, missing vdd-hba).  Add the
missing supply for full hardware description, even though it should not
have functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230906104744.163479-5-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

According to schematics the L9B regulator supplies VCCQ (already in DTS)
and the UFS controller pads (VDD_PX10, missing vdd-hba).  Add the
missing supply for full hardware description, even though it should not
have functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230906104744.163479-4-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

According to schematics the L9B regulator supplies VCCQ (already in DTS)
and the UFS controller pads (VDD_PX10, missing vdd-hba).  Add the
missing supply for full hardware description, even though it should not
have functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230906104744.163479-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

According to schematics the VCCQ2 supply is not connected and the L3G
regulator instead powers up the controller pads (VDD_PX10).  Use correct
supply vdd-hba and drop unsupported current limit for the vdd-hba.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230906104744.163479-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

According to schematics the VCCQ2 supply is not connected and the L3G
regulator instead powers up the controller pads (VDD_PX10).  Use correct
supply vdd-hba and drop unsupported current limit for the vdd-hba.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230906104744.163479-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Cheza firmware doesn't allow controlling LMh from the operating system.

Fixes: 36c65812 ("arm64: dts: qcom: sdm845: Add support for LMh node")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230912071205.11502-2-david@ixit.czSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The original commit hasn't been updated according to
refactoring done in sdm845.dtsi.

Fixes: a1ade6ca ("arm64: dts: qcom: sdm845: Switch PSCI cpu idle states from PC to OSI")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912071205.11502-1-david@ixit.czSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The GENI UART driver requires one specifies a numeric alias. Do so and
set the stdout-path to route the console to the debug uart in the microSD
slot by default.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230912-topic-edoconsole-v1-1-b392ea67e539@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the WCN7850 bluetooth over the UART14 link.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230911-topic-sm8550-upstream-bt-v4-2-a5a428c77418@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the Geni High Speed UART QUP instance 2 element 6
node and associated default pinctrl.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230911-topic-sm8550-upstream-bt-v4-1-a5a428c77418@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Pull drm ci scripts from Dave Airlie:
 "This is a bunch of ci integration for the freedesktop gitlab instance
  where we currently do upstream userspace testing on diverse sets of
  GPU hardware. From my perspective I think it's an experiment worth
  going with and seeing how the benefits/noise playout keeping these
  files useful.

  Ideally I'd like to get this so we can do pre-merge testing on PRs
  eventually.

  Below is some info from danvet on why we've ended up making the
  decision and how we can roll it back if we decide it was a bad plan.

  Why in upstream?

   - like documentation, testcases, tools CI integration is one of these
     things where you can waste endless amounts of time if you
     accidentally have a version that doesn't match your source code

   - but also like the above, there's a balance, this is the initial cut
     of what we think makes sense to keep in sync vs out-of-tree,
     probably needs adjustment

   - gitlab supports out-of-repo gitlab integration and that's what's
     been used for the kernel in drm, but it results in per-driver
     fragmentation and lots of duplicated effort. the simple act of
     smashing an arbitrary winner into a topic branch already started
     surfacing patches on dri-devel and sparking good cross driver team
     discussions

  Why gitlab?

   - it's not any more shit than any of the other CI

   - drm userspace uses it extensively for everything in userspace, we
     have a lot of people and experience with this, including
     integration of hw testing labs

   - media userspace like gstreamer is also on gitlab.fd.o, and there's
     discussion to extend this to the media subsystem in some fashion

  Can this be shared?

   - there's definitely a pile of code that could move to scripts/ if
     other subsystem adopt ci integration in upstream kernel git. other
     bits are more drm/gpu specific like the igt-gpu-tests/tools
     integration

   - docker images can be run locally or in other CI runners

  Will we regret this?

   - it's all in one directory, intentionally, for easy deletion

   - probably 1-2 years in upstream to see whether this is worth it or a
     Big Mistake. that's roughly what it took to _really_ roll out solid
     CI in the bigger userspace projects we have on gitlab.fd.o like
     mesa3d"

* tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm:
  drm: ci: docs: fix build warning - add missing escape
  drm: Add initial ci/ subdirectory

Pull x86 fixes from Ingo Molnar:
 "Fix preemption delays in the SGX code, remove unnecessarily
  UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and
  make the x86 SMP init code a bit more conservative to fix kexec()
  lockups"

* tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()
  x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI
  x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld
  x86/smp: Don't send INIT to non-present and non-booted CPUs