- 17 Dec, 2020 3 commits
-
-
Parav Pandit authored
MLX5_GENERAL_OBJECT_TYPES types bitfield is 64-bit field. Defining an enum for such bit fields on 32-bit platform results in below warning. ./include/vdso/bits.h:7:26: warning: left shift count >= width of type [-Wshift-count-overflow] ^ ./include/linux/mlx5/mlx5_ifc.h:10716:46: note: in expansion of macro ‘BIT’ MLX5_HCA_CAP_GENERAL_OBJECT_TYPES_SAMPLER = BIT(0x20), ^~~ Use 32-bit friendly BIT_ULL macro. Fixes: 2a297089 ("net/mlx5: Add sample offload hardware bits and structures") Signed-off-by:Parav Pandit <parav@nvidia.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20201213120641.216032-1-leon@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Geliang Tang authored
This patch cleared use_ack and use_map when dropping other suboptions to fix the following syzkaller BUG: [ 15.223006] BUG: unable to handle page fault for address: 0000000000223b10 [ 15.223700] #PF: supervisor read access in kernel mode [ 15.224209] #PF: error_code(0x0000) - not-present page [ 15.224724] PGD b8d5067 P4D b8d5067 PUD c0a5067 PMD 0 [ 15.225237] Oops: 0000 [#1] SMP [ 15.225556] CPU: 0 PID: 7747 Comm: syz-executor Not tainted 5.10.0-rc6+ #24 [ 15.226281] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 15.227292] RIP: 0010:skb_release_data+0x89/0x1e0 [ 15.227816] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34 [ 15.229669] RSP: 0018:ffffc900019c7c08 EFLAGS: 00010293 [ 15.230188] RAX: ffff88800daad900 RBX: 0000000000223b08 RCX: 0000000000000006 [ 15.230895] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6dc700 [ 15.231593] RBP: ffff88807f71a4c0 R08: 0000000000000001 R09: 0000000000000001 [ 15.232299] R10: ffffc900019c7c18 R11: 0000000000000000 R12: ffff88807f71a4f0 [ 15.233007] R13: 0000000000000000 R14: ffff88807f6dc700 R15: 0000000000000002 [ 15.233714] FS: 00007f65d9b5f700(0000) GS:ffff88807c400000(0000) knlGS:0000000000000000 [ 15.234509] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.235081] CR2: 0000000000223b10 CR3: 000000000b883000 CR4: 00000000000006f0 [ 15.235788] Call Trace: [ 15.236042] skb_release_all+0x28/0x30 [ 15.236419] __kfree_skb+0x11/0x20 [ 15.236768] tcp_data_queue+0x270/0x1240 [ 15.237161] ? tcp_urg+0x50/0x2a0 [ 15.237496] tcp_rcv_established+0x39a/0x890 [ 15.237997] ? mark_held_locks+0x49/0x70 [ 15.238467] tcp_v4_do_rcv+0xb9/0x270 [ 15.238915] __release_sock+0x8a/0x160 [ 15.239365] release_sock+0x32/0xd0 [ 15.239793] __inet_stream_connect+0x1d2/0x400 [ 15.240313] ? do_wait_intr_irq+0x80/0x80 [ 15.240791] inet_stream_connect+0x36/0x50 [ 15.241275] mptcp_stream_connect+0x69/0x1b0 [ 15.241787] __sys_connect+0x122/0x140 [ 15.242236] ? syscall_enter_from_user_mode+0x17/0x50 [ 15.242836] ? lockdep_hardirqs_on_prepare+0xd4/0x170 [ 15.243436] __x64_sys_connect+0x1a/0x20 [ 15.243924] do_syscall_64+0x33/0x40 [ 15.244313] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 15.244821] RIP: 0033:0x7f65d946e469 [ 15.245183] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 [ 15.247019] RSP: 002b:00007f65d9b5eda8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 15.247770] RAX: ffffffffffffffda RBX: 000000000049bf00 RCX: 00007f65d946e469 [ 15.248471] RDX: 0000000000000010 RSI: 00000000200000c0 RDI: 0000000000000005 [ 15.249205] RBP: 000000000049bf00 R08: 0000000000000000 R09: 0000000000000000 [ 15.249908] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000049bf0c [ 15.250603] R13: 00007fffe8a25cef R14: 00007f65d9b3f000 R15: 0000000000000003 [ 15.251312] Modules linked in: [ 15.251626] CR2: 0000000000223b10 [ 15.251965] BUG: kernel NULL pointer dereference, address: 0000000000000048 [ 15.252005] ---[ end trace f5c51fe19123c773 ]--- [ 15.252822] #PF: supervisor read access in kernel mode [ 15.252823] #PF: error_code(0x0000) - not-present page [ 15.252825] PGD c6c6067 P4D c6c6067 PUD c0d8067 [ 15.253294] RIP: 0010:skb_release_data+0x89/0x1e0 [ 15.253910] PMD 0 [ 15.253914] Oops: 0000 [#2] SMP [ 15.253917] CPU: 1 PID: 7746 Comm: syz-executor Tainted: G D 5.10.0-rc6+ #24 [ 15.253920] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 15.254435] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34 [ 15.254899] RIP: 0010:skb_release_data+0x89/0x1e0 [ 15.254902] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34 [ 15.254905] RSP: 0018:ffffc900019bfc08 EFLAGS: 00010293 [ 15.255376] RSP: 0018:ffffc900019c7c08 EFLAGS: 00010293 [ 15.255580] [ 15.255583] RAX: ffff888004a7ac80 RBX: 0000000000000040 RCX: 0000000000000000 [ 15.255912] [ 15.256724] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6ddd00 [ 15.257620] RAX: ffff88800daad900 RBX: 0000000000223b08 RCX: 0000000000000006 [ 15.259817] RBP: ffff88800e9006c0 R08: 0000000000000000 R09: 0000000000000000 [ 15.259818] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88800e9006f0 [ 15.259820] R13: 0000000000000000 R14: ffff88807f6ddd00 R15: 0000000000000002 [ 15.259822] FS: 00007fae4a60a700(0000) GS:ffff88807c500000(0000) knlGS:0000000000000000 [ 15.259826] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.260296] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6dc700 [ 15.262514] CR2: 0000000000000048 CR3: 000000000b89c000 CR4: 00000000000006e0 [ 15.262515] Call Trace: [ 15.262519] skb_release_all+0x28/0x30 [ 15.262523] __kfree_skb+0x11/0x20 [ 15.263054] RBP: ffff88807f71a4c0 R08: 0000000000000001 R09: 0000000000000001 [ 15.263680] tcp_data_queue+0x270/0x1240 [ 15.263843] R10: ffffc900019c7c18 R11: 0000000000000000 R12: ffff88807f71a4f0 [ 15.264693] ? tcp_urg+0x50/0x2a0 [ 15.264856] R13: 0000000000000000 R14: ffff88807f6dc700 R15: 0000000000000002 [ 15.265720] tcp_rcv_established+0x39a/0x890 [ 15.266438] FS: 00007f65d9b5f700(0000) GS:ffff88807c400000(0000) knlGS:0000000000000000 [ 15.267283] ? __schedule+0x3fa/0x880 [ 15.267287] tcp_v4_do_rcv+0xb9/0x270 [ 15.267290] __release_sock+0x8a/0x160 [ 15.268049] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.268788] release_sock+0x32/0xd0 [ 15.268791] __inet_stream_connect+0x1d2/0x400 [ 15.268795] ? do_wait_intr_irq+0x80/0x80 [ 15.269593] CR2: 0000000000223b10 CR3: 000000000b883000 CR4: 00000000000006f0 [ 15.270246] inet_stream_connect+0x36/0x50 [ 15.270250] mptcp_stream_connect+0x69/0x1b0 [ 15.270253] __sys_connect+0x122/0x140 [ 15.271097] Kernel panic - not syncing: Fatal exception [ 15.271820] ? syscall_enter_from_user_mode+0x17/0x50 [ 15.283542] ? lockdep_hardirqs_on_prepare+0xd4/0x170 [ 15.284275] __x64_sys_connect+0x1a/0x20 [ 15.284853] do_syscall_64+0x33/0x40 [ 15.285369] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 15.286105] RIP: 0033:0x7fae49f19469 [ 15.286638] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 [ 15.289295] RSP: 002b:00007fae4a609da8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 15.290375] RAX: ffffffffffffffda RBX: 000000000049bf00 RCX: 00007fae49f19469 [ 15.291403] RDX: 0000000000000010 RSI: 00000000200000c0 RDI: 0000000000000005 [ 15.292437] RBP: 000000000049bf00 R08: 0000000000000000 R09: 0000000000000000 [ 15.293456] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000049bf0c [ 15.294473] R13: 00007fff0004b6bf R14: 00007fae4a5ea000 R15: 0000000000000003 [ 15.295492] Modules linked in: [ 15.295944] CR2: 0000000000000048 [ 15.296567] Kernel Offset: disabled [ 15.296941] ---[ end Kernel panic - not syncing: Fatal exception ]--- Reported-by:
Christoph Paasch <cpaasch@apple.com> Fixes: 84dfe367 (mptcp: send out dedicated ADD_ADDR packet) Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/ccca4e8f01457a1b495c5d612ed16c5f7a585706.1608010058.git.geliangtang@gmail.comSigned-off-by:
-
Tobias Klauser authored
The BIT() macro is not available for the UAPI headers. Moreover, it can be defined differently in user space headers. Thus, replace its usage with the _BITUL() macro which is already used in other macro definitions in <linux/devlink.h>. Fixes: dc64cc7c ("devlink: Add devlink reload limit option") Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Link: https://lore.kernel.org/r/20201215102531.16958-1-tklauser@distanz.chSigned-off-by:
-
- 16 Dec, 2020 23 commits
-
-
Vincent Stehlé authored
The ndo_start_xmit() method must not attempt to free the skb to transmit when returning NETDEV_TX_BUSY. Therefore, make sure the korina_send_packet() function returns NETDEV_TX_OK when it frees a packet. Fixes: ef11291b ("Add support the Korina (IDT RC32434) Ethernet MAC") Suggested-by:
Vincent Stehlé <vincent.stehle@laposte.net> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201214220952.19935-1-vincent.stehle@laposte.netSigned-off-by:
-
Karsten Graul authored
The parent of an ib device is used to retrieve the PCI device attributes. It turns out that there are possible cases when an ib device has no parent set in the device structure, which may lead to page faults when trying to access this memory. Fix that by checking the parent pointer and consolidate the pci device specific processing in a new function. Fixes: a3db10ef ("net/smc: Add support for obtaining SMCR device list") Reported-by: syzbot+600fef7c414ee7e2d71b@syzkaller.appspotmail.com Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20201215091058.49354-2-kgraul@linux.ibm.comSigned-off-by:
-
Ivan Vecera authored
Fix two error paths in ethnl_set_channels() to avoid lock-up caused but unreleased RTNL. Fixes: e19c591e ("ethtool: set device channel counts with CHANNELS_SET request") Reported-by:
LiLiang <liali@redhat.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/20201215090810.801777-1-ivecera@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Bongsu Jeon says: ==================== nfc: s3fwrn5: Refactor the s3fwrn5 module Refactor the s3fwrn5 module. 1/2 is to remove the unneeded delay for NFC sleep. 2/2 is to remove the unused NCI prop commands. ==================== Link: https://lore.kernel.org/r/20201215065401.3220-1-bongsu.jeon@samsung.comSigned-off-by:
-
Bongsu Jeon authored
Remove the unused NCI prop commands that s3fwrn5 driver doesn't use. Signed-off-by:
Bongsu Jeon <bongsu.jeon@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Bongsu Jeon authored
Remove the delay for NFC sleep because the delay is only needed to guarantee that the NFC is awake. Signed-off-by:
-
Jakub Kicinski authored
Kdoc does not like it when multiline comment follows the networking style of starting right on the first line: include/linux/phy.h:869: warning: Function parameter or member 'config_intr' not described in 'phy_driver' Link: https://lore.kernel.org/r/20201215063750.3120976-1-kuba@kernel.orgSigned-off-by:
-
Hoang Le authored
When we initialize nlmsghdr with no payload inside tipc_nl_compat_dumpit() the parsing function returns -EINVAL. We fix it by making the parsing call conditional. Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20201215033151.76139-1-hoang.h.le@dektech.com.auSigned-off-by:
-
Jakub Kicinski authored
Lijun Pan says: ==================== add a locked version of netdev_notify_peers This series introduce the lockless version of netdev_notify_peers and then apply it to the relevant drivers. In v1, a more appropriate name __netdev_notify_peers is used; netdev_notify_peers is converted to call the new helper. In v2, patch 3 calls the new helper where notify variable used to be set true. ==================== Link: https://lore.kernel.org/r/20201214211930.80778-1-ljp@linux.ibm.comSigned-off-by:
-
Lijun Pan authored
Start to use the lockless version of netdev_notify_peers. Call the helper where notify variable used to be set true. Remove the notify bool variable and sort the variables in reverse Christmas tree order. Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Lijun Pan <ljp@linux.ibm.com> Signed-off-by:
-
Lijun Pan authored
Start to use the lockless version of netdev_notify_peers. Signed-off-by:
-
Lijun Pan authored
There are some use cases for netdev_notify_peers in the context when rtnl lock is already held. Introduce lockless version of netdev_notify_peers call to save the extra code to call call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, dev); call_netdevice_notifiers(NETDEV_RESEND_IGMP, dev); After that, convert netdev_notify_peers to call the new helper. Suggested-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
-
Christophe JAILLET authored
net: allwinner: Fix some resources leak in the error handling path of the probe and in the remove function 'irq_of_parse_and_map()' should be balanced by a corresponding 'irq_dispose_mapping()' call. Otherwise, there is some resources leaks. Add such a call in the error handling path of the probe function and in the remove function. Fixes: 49220505 ("net: Add EMAC ethernet driver found on Allwinner A10 SoC's") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201214202117.146293-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Michal Kubecek authored
Syzbot reported a shift of a u32 by more than 31 in strset_parse_request() which is undefined behavior. This is caused by range check of string set id using variable ret (which is always 0 at this point) instead of id (string set id from request). Fixes: 71921690 ("ethtool: provide string sets with STRSET_GET request") Reported-by: syzbot+96523fb438937cd01220@syzkaller.appspotmail.com Signed-off-by:
-
Christophe JAILLET authored
In case of error after calling 'ocelot_init()', it must be undone by a corresponding 'ocelot_deinit()' call, as already done in the remove function. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201213114838.126922-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Geoff Levand authored
The connector driver never modifies any cb_id passed to it, so add a const qualifier to those arguments so callers can declare their struct cb_id as a constant object. Fixes build warnings like these when passing a constant struct cb_id: warning: passing argument 1 of ‘cn_add_callback’ discards ‘const’ qualifier from pointer target Signed-off-by:
Geoff Levand <geoff@infradead.org> Link: https://lore.kernel.org/r/a9e49c9e-67fa-16e7-0a6b-72f6bd30c58a@infradead.orgSigned-off-by:
-
Christophe JAILLET authored
If the 'register_netdev()' call fails, we must undo a previous 'bcmgenet_mii_init()' call. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Ioana Ciornei authored
This patch fixes an error condition triggered when the code path which transmits a S/G frame descriptor when the skb's headroom is not enough for DPAA2's needs. We are greated with a splat like the one below when a SGT structure is recycled and that is because even though a dma_unmap is performed on the Tx confirmation path, the unmap is not done with the proper size. [ 714.464927] WARNING: CPU: 13 PID: 0 at drivers/iommu/io-pgtable-arm.c:281 __arm_lpae_map+0x2d4/0x30c (...) [ 714.465343] Call trace: [ 714.465348] __arm_lpae_map+0x2d4/0x30c [ 714.465353] __arm_lpae_map+0x114/0x30c [ 714.465357] __arm_lpae_map+0x114/0x30c [ 714.465362] __arm_lpae_map+0x114/0x30c [ 714.465366] arm_lpae_map+0xf4/0x180 [ 714.465373] arm_smmu_map+0x4c/0xc0 [ 714.465379] __iommu_map+0x100/0x2bc [ 714.465385] iommu_map_atomic+0x20/0x30 [ 714.465391] __iommu_dma_map+0xb0/0x110 [ 714.465397] iommu_dma_map_page+0xb8/0x120 [ 714.465404] dma_map_page_attrs+0x1a8/0x210 [ 714.465413] __dpaa2_eth_tx+0x384/0xbd0 [fsl_dpaa2_eth] [ 714.465421] dpaa2_eth_tx+0x84/0x134 [fsl_dpaa2_eth] [ 714.465427] dev_hard_start_xmit+0x10c/0x2b0 [ 714.465433] sch_direct_xmit+0x1a0/0x550 (...) The dpaa2-eth driver uses an area of software annotations to transmit necessary information from the Tx path to the Tx confirmation one. This SWA structure has a different layout for each kind of frame that we are dealing with: linear, S/G or XDP. The commit referenced was incorrectly setting up the 'sgt_size' field for the S/G type of SWA even though we are dealing with a linear skb here. Fixes: d70446ee ("dpaa2-eth: send a scatter-gather FD instead of realloc-ing") Reported-by:
Daniel Thompson <daniel.thompson@linaro.org> Tested-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201211171607.108034-1-ciorneiioana@gmail.comSigned-off-by:
-
Oleksij Rempel authored
With lockdep enabled, we will get following warning: ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 18, name: kworker/0:1 INFO: lockdep is turned off. irq event stamp: 602 hardirqs last enabled at (601): [<8073fde0>] _raw_spin_unlock_irq+0x3c/0x80 hardirqs last disabled at (602): [<8073a4f4>] __schedule+0x184/0x800 softirqs last enabled at (0): [<80080f60>] copy_process+0x578/0x14c8 softirqs last disabled at (0): [<00000000>] 0x0 CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 5.10.0-rc3-ar9331-00734-g7d644991df0c #31 Workqueue: events deferred_probe_work_func Stack : 80980000 80980000 8089ef70 80890000 804b5414 80980000 00000002 80b53728 00000000 800d1268 804b5414 ffffffde 00000017 800afe08 81943860 0f5bfc32 00000000 00000000 8089ef70 819436c0 ffffffea 00000000 00000000 00000000 8194390c 808e353c 0000000f 66657272 80980000 00000000 00000000 80890000 804b5414 80980000 00000002 80b53728 00000000 00000000 00000000 80d40000 ... Call Trace: [<80069ce0>] show_stack+0x9c/0x140 [<800afe08>] ___might_sleep+0x220/0x244 [<8073bfb0>] __mutex_lock+0x70/0x374 [<8073c2e0>] mutex_lock_nested+0x2c/0x38 [<804b5414>] regmap_update_bits_base+0x38/0x8c [<804ee584>] regmap_update_bits+0x1c/0x28 [<804ee714>] ar9331_sw_unmask_irq+0x34/0x60 [<800d91f0>] unmask_irq+0x48/0x70 [<800d93d4>] irq_startup+0x114/0x11c [<800d65b4>] __setup_irq+0x4f4/0x6d0 [<800d68a0>] request_threaded_irq+0x110/0x190 [<804e3ef0>] phy_request_interrupt+0x4c/0xe4 [<804df508>] phylink_bringup_phy+0x2c0/0x37c [<804df7bc>] phylink_of_phy_connect+0x118/0x130 [<806c1a64>] dsa_slave_create+0x3d0/0x578 [<806bc4ec>] dsa_register_switch+0x934/0xa20 [<804eef98>] ar9331_sw_probe+0x34c/0x364 [<804eb48c>] mdio_probe+0x44/0x70 [<8049e3b4>] really_probe+0x30c/0x4f4 [<8049ea10>] driver_probe_device+0x264/0x26c [<8049bc10>] bus_for_each_drv+0xb4/0xd8 [<8049e684>] __device_attach+0xe8/0x18c [<8049ce58>] bus_probe_device+0x48/0xc4 [<8049db70>] deferred_probe_work_func+0xdc/0xf8 [<8009ff64>] process_one_work+0x2e4/0x4a0 [<800a0770>] worker_thread+0x2a8/0x354 [<800a774c>] kthread+0x16c/0x174 [<8006306c>] ret_from_kernel_thread+0x14/0x1c ar9331_switch ethernet.1:10 lan1 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:02] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) DSA: tree 0 setup To fix it, it is better to move access to MDIO register to the .irq_bus_sync_unlock call back. Fixes: ec6698c2 ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by:Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201211110317.17061-1-o.rempel@pengutronix.deSigned-off-by:
-
Jakub Kicinski authored
Björn Töpel says: ==================== i40e/ice AF_XDP ZC fixes This series address two crashes in the AF_XDP zero-copy mode for ice and i40e. More details in each individual the commit message. ==================== Link: https://lore.kernel.org/r/20201211145712.72957-1-bjorn.topel@gmail.comSigned-off-by:
-
Björn Töpel authored
On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 3b4f0b66 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
-
Björn Töpel authored
On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 2d4238f5 ("ice: Add support for AF_XDP") Signed-off-by:
-
Sven Van Asbroeck authored
Even if there is more rx data waiting on the chip, the rx napi poll fn will never run more than once - it will always read a few buffers, then bail out and re-arm interrupts. Which results in ping-pong between napi and interrupt. This defeats the purpose of napi, and is bad for performance. Fix by making the rx napi poll behave identically to other ethernet drivers: 1. initialize rx napi polling with an arbitrary budget (64). 2. in the polling fn, return full weight if rx queue is not depleted, this tells the napi core to "keep polling". 3. update the rx tail ("ring the doorbell") once for every 8 processed rx ring buffers. Thanks to Jakub Kicinski, Eric Dumazet and Andrew Lunn for their expert opinions and suggestions. Tested with 20 seconds of full bandwidth receive (iperf3): rx irqs softirqs(NET_RX) ----------------------------- before 23827 33620 after 129 4081 Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by:Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201215161954.5950-1-TheSven73@gmail.comSigned-off-by:
-
- 15 Dec, 2020 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging / IIO driver updates from Greg KH: "Here is the big staging and IIO driver pull request for 5.11-rc1 Lots of different things in here: - loads of driver updates - so many coding style cleanups - new IIO drivers - Android ION code is finally removed from the tree - wimax drivers are moved to staging on their way out of the kernel Nothing really exciting, just the constant grind of kernel development :) All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits) staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe() staging: most: Fix spelling mistake "tranceiver" -> "transceiver" staging: qlge: remove duplicate word in comment staging: comedi: mf6x4: Fix AI end-of-conversion detection staging: greybus: Add TODO item about modernizing the pwm code pinctrl: ralink: add a pinctrl driver for the rt2880 family dt-bindings: pinctrl: rt2880: add binding document staging: rtl8723bs: remove ELEMENT_ID enum staging: rtl8723bs: remove unused macros staging: rtl8723bs: replace EID_EXTCapability staging: rtl8723bs: replace EID_BSSIntolerantChlReport staging: rtl8723bs: replace EID_BSSCoexistence staging: rtl8723bs: replace _MME_IE_ staging: rtl8723bs: replace _WAPI_IE_ staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_ staging: rtl8723bs: replace _ERPINFO_IE_ staging: rtl8723bs: replace _CHLGETXT_IE_ staging: rtl8723bs: replace _COUNTRY_IE_ staging: rtl8723bs: replace _IBSS_PARA_IE_ staging: rtl8723bs: replace _TIM_IE_ ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char / misc driver updates from Greg KH: "Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates" * tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits) extcon: max77693: Fix modalias string extcon: fsa9480: Support TI TSU6111 variant extcon: fsa9480: Rewrite bindings in YAML and extend dt-bindings: extcon: add binding for TUSB320 extcon: Add driver for TI TUSB320 slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew() siox: Make remove callback return void siox: Use bus_type functions for probe, remove and shutdown spmi: Add driver shutdown support spmi: fix some coding style issues at the spmi core spmi: get rid of a warning when built with W=1 uio: uio_hv_generic: use devm_kzalloc() for private data alloc uio: uio_fsl_elbc_gpcm: use device-managed allocators uio: uio_aec: use devm_kzalloc() for uio_info object uio: uio_cif: use devm_kzalloc() for uio_info object uio: uio_netx: use devm_kzalloc() for or uio_info object uio: uio_mf624: use devm_kzalloc() for uio_info object uio: uio_sercos3: use device-managed functions for simple allocs uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers uio: uio_dmem_genirq: convert simple allocations to device-managed ...
-
Linus Torvalds authored
Merge tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core updates for 5.11-rc1 This time there was a lot of different work happening here for some reason: - redo of the fwnode link logic, speeding it up greatly - auxiliary bus added (this was a tag that will be pulled in from other trees/maintainers this merge window as well, as driver subsystems started to rely on it) - platform driver core cleanups on the way to fixing some long-time api updates in future releases - minor fixes and tweaks. All have been in linux-next with no (finally) reported issues. Testing there did helped in shaking issues out a lot :)" * tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits) driver core: platform: don't oops in platform_shutdown() on unbound devices ACPI: Use fwnode_init() to set up fwnode misc: pvpanic: Replace OF headers by mod_devicetable.h misc: pvpanic: Combine ACPI and platform drivers usb: host: sl811: Switch to use platform_get_mem_or_io() vfio: platform: Switch to use platform_get_mem_or_io() driver core: platform: Introduce platform_get_mem_or_io() dyndbg: fix use before null check soc: fix comment for freeing soc_dev_attr driver core: platform: use bus_type functions driver core: platform: change logic implementing platform_driver_probe driver core: platform: reorder functions driver core: make driver_probe_device() static driver core: Fix a couple of typos driver core: Reorder devices on successful probe driver core: Delete pointless parameter in fwnode_operations.add_links driver core: Refactor fw_devlink feature efi: Update implementation of add_links() to create fwnode links of: property: Update implementation of add_links() to create fwnode links driver core: Use device's fwnode to check if it is waiting for suppliers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty / serial updates from Greg KH: "Here is the "large" set of tty and serial patches for 5.11-rc1. Nothing major at all, some cleanups and some driver removals, always a nice sign: - build warning cleanups - vt locking and logic unwinding and cleanups - tiny serial driver fixes and updates - removal of the synclink serial driver as it's no longer needed - removal of dead termiox code All of this has been in linux-next for a while with no reported issues" * tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (89 commits) serial: 8250_pci: Drop bogus __refdata annotation tty: serial: meson: enable console as module serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access serial: imx: Move imx_uart_probe_dt() content into probe() serial: imx: Remove unneeded of_device_get_match_data() NULL check tty: Fix whitespace inconsistencies in vt_io_ioctl serial_core: Check for port state when tty is in error state dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC tty: use const parameters in port-flag accessors tty: use assign_bit() in port-flag accessors earlycon: drop semicolon from earlycon macro tty: Remove dead termiox code tty/serial/imx: Enable TXEN bit in imx_poll_init(). tty : serial: jsm: Fixed file by adding spacing tty: serial: uartlite: Support probe deferral earlycon: simplify earlycon-table implementation tty: serial: bcm63xx: lower driver dependencies serial: mxs-auart: Remove unneeded platform_device_id serial: 8250-mtk: Fix reference leak in mtk8250_probe serial: imx: Remove unused .id_table support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / Thunderbolt updates from Greg KH: "Here is the big USB and thunderbolt pull request for 5.11-rc1. Nothing major in here, just the grind of constant development to support new hardware and fix old issues: - thunderbolt updates for new USB4 hardware - cdns3 major driver updates - lots of typec updates and additions as more hardware is available - usb serial driver updates and fixes - other tiny USB driver updates All have been in linux-next with no reported issues" * tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: phy: convert comma to semicolon usb: ucsi: convert comma to semicolon usb: typec: tcpm: convert comma to semicolon usb: typec: tcpm: Update vbus_vsafe0v on init usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled usb: typec: Add class for plug alt mode device USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP USB: typec: tcpm: Fix PR_SWAP error handling USB: typec: tcpm: Hard Reset after not receiving a Request USB: gadget: f_fs: remove likely/unlikely usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus USB: gadget: f_midi: setup SuperSpeed Plus descriptors USB: gadget: f_acm: add support for SuperSpeed Plus USB: gadget: f_rndis: fix bitrate for SuperSpeed and above usb: typec: intel_pmc_mux: Configure cable generation value for USB4 MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data() usb: chipidea: usbmisc_imx: Use of_device_get_match_data() usb: cdns3: fix NULL pointer dereference on no platform data ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "Lots of changes (slightly more code increase than usual) at this time, while most of code changes are ASoC driver-specific. Here are some highlights: Core: - The new auxiliary bus implementation for Intel DSP, which will be used by other drivers as well - Lots of ASoC core cleanups and refactoring - UBSAN and KCSAN fixes in rawmidi, sequencer and a few others - Compress-offload API enhancement for the pause during draining HD- and USB-audio: - Enhancements of the USB-audio implicit feedback support, including better full-duplex operations - Continued CA0132 improvements and fixes - A few new quirk entries, HDMI audio fixes ASoC: - Support for boot time selection of Intel DSP firmware, which should help distros/users testing new stuff more easily; the kconfig was moved to boot time option, too - Some basic DPCM support in audio graph card - Removal of old pre-DT Freescale drivers - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715, Qualcomm SM8250 and simple GPIO based muxes" * tag 'sound-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (445 commits) ALSA: pcm: oss: Fix potential out-of-bounds shift ALSA: usb-audio: Fix potential out-of-bounds shift ALSA: hda/ca0132 - Add ZxR surround DAC setup. ALSA: hda/ca0132 - Add 8051 PLL write helper functions. ALSA: hda/hdmi: packet buffer index must be set before reading value ASoC: SOF: imx: update kernel-doc description ASoC: mediatek: mt8183: delete some unreachable code ASoC: mediatek: mt8183: add PM ops to machine drivers ASoC: topology: Fix wrong size check ASoC: topology: Add missing size check ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err ASoC: SOF: modify the SOF_DBG flags ASoC: SOF: Intel: hda: remove duplicated status dump ASoC: rt1015p: delay 300ms after SDB pulling high for calibration ASoC: rt1015p: move SDB control from trigger to DAPM ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control() ALSA: usb-audio: Fix control 'access overflow' errors from chmap ALSA: hda/hdmi: always print pin NIDs as hexadecimal ALSA: hda/realtek - Add supported for more Lenovo ALC285 Headset Button ALSA: hda/ca0132 - Remove now unnecessary DSP setup functions. ... -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ... -
Linus Torvalds authored
Merge misc updates from Andrew Morton: - a few random little subsystems - almost all of the MM patches which are staged ahead of linux-next material. I'll trickle to post-linux-next work in as the dependents get merged up. Subsystems affected by this patch series: kthread, kbuild, ide, ntfs, ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation, kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction, oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc, uaccess, zram, and cleanups). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits) mm: cleanup kstrto*() usage mm: fix fall-through warnings for Clang mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at mm: shmem: convert shmem_enabled_show to use sysfs_emit_at mm:backing-dev: use sysfs_emit in macro defining functions mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening mm: use sysfs_emit for struct kobject * uses mm: fix kernel-doc markups zram: break the strict dependency from lzo zram: add stat to gather incompressible pages since zram set up zram: support page writeback mm/process_vm_access: remove redundant initialization of iov_r mm/zsmalloc.c: rework the list_add code in insert_zspage() mm/zswap: move to use crypto_acomp API for hardware acceleration mm/zswap: fix passing zero to 'PTR_ERR' warning mm/zswap: make struct kernel_param_ops definitions const userfaultfd/selftests: hint the test runner on required privilege userfaultfd/selftests: fix retval check for userfaultfd_open() userfaultfd/selftests: always dump something in modes userfaultfd: selftests: make __{s,u}64 format specifiers portable ... -
Alexey Dobriyan authored
Range checks can folded into proper conversion function. kstrto*() exist for all arithmetic types. Link: https://lkml.kernel.org/r/20201122123759.GC92364@localhost.localdomainSigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding a break statement instead of just letting the code fall through to the next, and by adding a fallthrough pseudo-keyword in places where the code is intended to fall through. Link: https://github.com/KSPP/linux/issues/115 Link: https://lkml.kernel.org/r/f5756988b8842a3f10008fbc5b0a654f828920a9.1605896059.git.gustavoars@kernel.orgSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Joe Perches authored
Convert the unbounded uses of sprintf to sysfs_emit. A few conversions may now not end in a newline if the output buffer is overflowed. Link: https://lkml.kernel.org/r/0c90a90f466167f8c37de4b737553cf49c4a277f.1605376435.git.joe@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Joe Perches authored
Update the function to use sysfs_emit_at while neatening the uses of sprintf and overwriting the last space char with a newline to avoid possible output buffer overflow. Miscellanea: - in shmem_enabled_show, the removal of the indirected use of fmt allows __printf verification Link: https://lkml.kernel.org/r/b612a93825e5ea330cb68d2e8b516e9687a06cc6.1605376435.git.joe@perches.comSigned-off-by:
-
Joe Perches authored
The cocci script used in commit bdacbb8d04f ("mm: Use sysfs_emit for struct kobject * uses") does not convert the name##_show macro because the macro uses concatenation via ##. Convert it by hand. Link: https://lkml.kernel.org/r/45ec6cfc177d743f9c0ebaf35e43969dce43af42.1605376435.git.joe@perches.comSigned-off-by: -
Joe Perches authored
Convert the only use of sprintf with struct kobject * that the cocci script could not convert. Miscellanea: - Neaten the uses of a constant string with sysfs_emit to use a const char * to reduce overall object size Link: https://lkml.kernel.org/r/7df6be66bbd68e1a0bca9d35aca1341dbf94d2a7.1605376435.git.joe@perches.comSigned-off-by:
-
