- 04 Nov, 2020 9 commits
-
-
Jiaxin Yu authored
This patch adds document for the machine board with mt6358, rt1015 and rt5682. Signed-off-by:
Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/1604390378-23993-10-git-send-email-jiaxin.yu@mediatek.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Jiaxin Yu authored
This patch adds support for the machine board with mt6359, rt1015 and rt5682. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 audio afe document. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 tdm dai driver. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 pcm dai driver. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 adda dai driver. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 i2s dai driver. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 platform and affiliated drivers. Signed-off-by:
-
Jiaxin Yu authored
Add the calibraion functions for initializing the codec when registering the machine driver. Signed-off-by:
-
- 03 Nov, 2020 6 commits
-
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201101160312.2296146-1-trix@redhat.comSigned-off-by:
-
Dan Carpenter authored
This code is correct, but it should be indented one more tab. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201103101853.GD1127762@mwandaSigned-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20201101172412.2306144-1-trix@redhat.comSigned-off-by:
-
Zhang Qilong authored
davinci_mcasp_get_dt_params alway return zero, and its return value could be ignored by the caller. So make it 'void' type to avoid the check its return value. Fixes: 764958f2 ("ASoC: ti: davinci-mcasp: Support for auxclk-fs-ratio") Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20201102103428.32678-1-zhangqilong3@huawei.comSigned-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
Codrin Ciubotariu authored
Besides the fact that muxclk is optional, muxclk can be set using assigned-clocks, removing the need to set it in driver. The warning is thus unneeded, so we can transform it in a debug print, eventually to just reflect that muxclk was not set by the driver. Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20201103100554.1307190-1-codrin.ciubotariu@microchip.comSigned-off-by:
-
- 02 Nov, 2020 3 commits
-
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20201101171943.2305030-1-trix@redhat.comSigned-off-by:
-
Xu Wang authored
Because clk_disable_unprepare() already checked NULL clock parameter, so the additional check is unnecessary, just remove it. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Acked-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
- 30 Oct, 2020 15 commits
-
-
Mark Brown authored
First patch adds tdm 4-slot 100fs DAI setting to avoid jitter of using 64fs on CML boards. Second patch is a DMI quirk for HP Dooly. Changes since v1: -Add comment on Dooly's DMI quirk Brent Lu (2): ASoC: intel: sof_rt5682: Add support for cml_rt1015_rt5682 ASoC: intel: sof_rt5682: Add quirk for Dooly sound/soc/intel/boards/sof_rt5682.c | 65 +++++++++++++++++-- .../intel/common/soc-acpi-intel-cml-match.c | 13 ++++ 2 files changed, 73 insertions(+), 5 deletions(-) -- 2.17.1
-
Brent Lu authored
This DMI product family string of this board is "Google_Hatch" so the DMI quirk will take place. However, this board is using rt1015 speaker amp instead of max98357a specified in the quirk. Therefore, we need an new DMI quirk for this board. Signed-off-by:
Brent Lu <brent.lu@intel.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20201030170559.20370-3-brent.lu@intel.comSigned-off-by:
-
Brent Lu authored
This patch adds the driver data and updates quirk info for cml with rt1015 speaker amp and rt5682 headset codec. Due to different mclk frequency on JSL and CML, we need to use 4 slot TDM 100fs to avoid the SSP m/n counter. Signed-off-by:
-
Clément Péron authored
Like A83T the Allwinner H3 doesn't have the DMA reception available for some audio interfaces. As it's already documented for A83T convert this to an enum and add the H3 interface. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Clément Péron <peron.clem@gmail.com> Link: https://lore.kernel.org/r/20201030144648.397824-15-peron.clem@gmail.comSigned-off-by:
-
Jernej Skrabec authored
H6 I2S is very similar to H3, except that it supports up to 16 channels and thus few registers have fields on different position. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Marcus Cooper <codekipper@gmail.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Clément Péron authored
Checkpatch script produces warning: WARNING: function definition argument 'const struct sun4i_i2s *' should also have an identifier name. Let's fix this by adding identifier name to get_bclk_parent_rate() and set_fmt() callback definition. Acked-by:
-
Samuel Holland authored
Because SUN4I_I2S_FIFO_CTRL_REG is volatile, writes done while the regmap is cache-only are ignored. To work around this, move the configuration to a callback that runs while the ASoC core has a runtime PM reference to the device. Signed-off-by:
Samuel Holland <samuel@sholland.org> Reviewed-by:
-
Clément Péron authored
The FIFO TX reg is volatile and sun8i i2s register mapping is different from sun4i. Even if in this case it's doesn't create an issue, Avoid setting some regs that are undefined in sun8i. Acked-by:
-
Marcus Cooper authored
Extend the functionality of the driver to include support of 20 and 24 bits per sample. Signed-off-by:
-
Marcus Cooper authored
On the newer SoCs such as the H3 and A64 this is set by default to transfer a 0 after each sample in each slot. However the A10 and A20 SoCs that this driver was developed on had a default setting where it padded the audio gain with zeros. This isn't a problem while we have only support for 16bit audio but with larger sample resolution rates in the pipeline then SEXT bits should be cleared so that they also pad at the LSB. Without this the audio gets distorted. Set sign extend sample for all the sunxi generations even if they are not affected. This will keep consistency and avoid relying on default. Signed-off-by:
-
Clément Péron authored
We are actually using a complex formula to just return a bunch of simple values. Also this formula is wrong for sun4i when calling get_wss() the function return 4 instead of 3. Replace this with a simpler switch case. Also drop the i2s params which is unused and return a simple int as returning an error code could be out of range for an s8 and there is no optim to return a s8 here. Fixes: 619c15f7 ("ASoC: sun4i-i2s: Change SR and WSS computation") Reviewed-by:
-
Jernej Skrabec authored
H6 I2S is very similar to that in H3, except it supports up to 16 channels. Signed-off-by:
-
Clément Péron authored
As slots and slot_width can be set manually using set_tdm(). These values are then kept in sun4i_i2s struct. So we need to check if these values are set or not. This is not done actually and will trigger a bug. For example, if we set to the simple soundcard in the device-tree dai-tdm-slot-width = <32> and then start a stream using S16_LE, currently we would calculate BCLK for 32-bit slots, but program lrck_period for 16-bit slots, making the sample rate double what we expected. To fix this, we need to check if these values are set or not but as this logic is already done by the caller. Avoid duplicating this logic and just pass the required values as params to set_chan_cfg(). Suggested-by:
-
Clément Péron authored
Left and Right justified mode are computed using the same formula as DSP_A and DSP_B mode. Which is wrong and the user manual explicitly says: LRCK_PERDIOD: PCM Mode: Number of BCLKs within (Left + Right) channel width. I2S/Left-Justified/Right-Justified Mode: Number of BCLKs within each individual channel width(Left or Right) Fix this by using the same formula as the I2S mode. Fixes: 7ae7834e ("ASoC: sun4i-i2s: Add support for DSP formats") Signed-off-by:
-
Michał Mirosław authored
Make tegra20-spdif default to N as all other drivers do. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Fixes: 774fec33 ("ASoC: Tegra: Implement SPDIF CPU DAI") Link: https://lore.kernel.org/r/8756eb5aac561173aa222c9cb64dd314ab1b1f9b.1603925200.git.mirq-linux@rere.qmqm.plSigned-off-by:
-
- 29 Oct, 2020 2 commits
-
-
Srinivas Kandagatla authored
Update compatible string as board compatible and device compatible should not be same!. Make the driver inline with the new bindings. Fixes: aa2e2785 ("ASoC: qcom: sm8250: add sound card qrb5165-rb5 support") Reported-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201029101550.31695-2-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
Update compatible string as board compatible and device compatible should not be same!. New compatible is now suffixed with -sndcard to be inline with other Qualcomm Sound cards. This also fixes the warnings/error reported by dt_binding_check. Fixes: 765c3759 ("ASoC: qcom: dt-bindings: Add SM8250 sound card bindings") Reported-by:
-
- 28 Oct, 2020 2 commits
-
-
Colin Ian King authored
The check for an error return from the call to snd_pcm_format_width is never true as the unsigned int bitwidth can never be less than zero. Fix this by making bitwidth an int. Fixes: 7cb37b7b ("ASoC: qcom: Add support for lpass hdmi driver") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201028115112.109017-1-colin.king@canonical.comSigned-off-by:
-
Srinivas Kandagatla authored
Static analysis Coverity had detected a potential array out-of-bounds write issue due to the fact that MAX AFE port Id was set to 16 instead of using AFE_PORT_MAX macro. Fix this by properly using AFE_PORT_MAX macro. Fixes: aa2e2785 ("ASoC: qcom: sm8250: add sound card qrb5165-rb5 support") Reported-by:
-
- 27 Oct, 2020 3 commits
-
-
Mark Brown authored
Merge series "Add documentation and machine driver for SC7180 sound card" from Cheng-Yi Chiang <cychiang@chromium.org>: Note: - The machine driver patch is made by the collaboration of Cheng-Yi Chiang <cychiang@chromium.org> Rohit kumar <rohitkr@codeaurora.org> Ajit Pandey <ajitp@codeaurora.org> But Ajit has left codeaurora. Changes from v1 to v2: - Ducumentation: Addressed all suggestions from Doug. - Machine driver: - Fix comment style for license. - Sort includes. - Remove sc7180_snd_hw_params. - Remove sc7180_dai_init and use aux device instead for headset jack registration. - Statically define format for Primary MI2S. - Atomic is not a concern because there is mutex in card to make sure startup and shutdown happen sequentially. - Fix missing return -EINVAL in startup. - Use static sound card. - Use devm_kzalloc to avoid kfree. Changes from v2 to v3: - Ducumentation: Addressed suggestions from Srini. - Machine driver: - Reuse qcom_snd_parse_of to parse properties. - Remove playback-only and capture-only. - Misc fixes to address comments. Changes from v3 to v4: - Ducumentation: Addressed suggestions from Rob. - Remove definition of dai. - Use 'sound-dai: true' for sound-dai schema. - Add reg property to pass 'make dt_binding_check' check although reg is not used in the driver. - Machine driver: - Add Reviewed-by: Tzung-Bi Shih <tzungbi@google.com> Changes from v4 to v5: - Documentation: Addressed suggestions from Rob. - Add definition for "#address-cells" and "#size-cells". - Add additionalProperties: false - Add required properties. Changes from v5 to v6: - Documentation: Addressed suggestions from Rob. - Drop contains in compatible strings. - Only allow dai-link@[0-9] - Remove reg ref since it has a type definition already. Changes from v6 to v7 - Documentation: - Add headset-jack and hdmi-jack to specify the codec responsible for jack detection. - HDMI codec driver: - Use component set_jack ops instead of exporting hdmi_codec_set_jack_detect. - Machine driver: - Removed aux device following Stephan's suggestion. - Use headset-jack and hdmi-jack to specify the codec responsible for jack detection. - Add support for HDMI(actually DP) playback. Changes from v7 to v8 - Documentation: - Remove headset-jack and hdmi-jack. - Machine driver: - Let machine driver decide whether there is a jack on the DAI. Changes from v8 to v9 - hdmi-codec driver: - Fixed the naming. - Machine driver: - Fixed unused fields. - Moved snd_soc_card_set_drvdata - Keep the naming of HDMI as dai name until v5 of lpass-hdmi patches. Changes from v9 to v10 - Documentation: - Let compatible string be more specific for board configuration to allow for future changes. - Machine driver: - Fixed unused include and macro. - Add temporary macro SC7180_LPASS_DP for future change in sc7180-lpass.h. - Let sound card be dynamically allocated. - Change compatible string accordingly. Changes from v10 to v11 - Machine driver: - Use temporary macro LPASS_DP_RX for future change in sc7180-lpass.h. Changes from v11 to v12 - Documentation: - Change the file and title name for new compatible string google,sc7180-trogdor. - Change the example of model name. - Machine driver: - Use the definitaion of index LPASS_DP_RX in sc7180-lpass.h. - Fix for compatible string. - Replace a comma with semicolon. Ajit Pandey (1): ASoC: qcom: sc7180: Add machine driver for sound card registration Cheng-Yi Chiang (1): ASoC: google: dt-bindings: Add sc7180-trogdor machine bindings .../bindings/sound/google,sc7180-trogdor.yaml | 130 +++++++++ sound/soc/qcom/Kconfig | 12 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/sc7180.c | 266 ++++++++++++++++++ 4 files changed, 410 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml create mode 100644 sound/soc/qcom/sc7180.c -- 2.29.0.rc2.309.g374f81d7ae-goog -
Srinivas Kandagatla authored
make use of devm_of_platform_populate to remove some redundant code! Signed-off-by:
-
Ajit Pandey authored
Add new driver to register sound card on sc7180 trogdor board and do the required configuration for lpass cpu dai and external codecs connected over MI2S interfaces. Signed-off-by:
Ajit Pandey <ajitp@codeaurora.org> Signed-off-by:
Cheng-Yi Chiang <cychiang@chromium.org> Reviewed-by:
-
