- 28 Feb, 2019 9 commits
-
-
Arjun Vynipadath authored
If we are not able to reach firmware, enter debugging mode that will help us to get adapter logs. Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arjun Vynipadath authored
T6 adapters support outer UDP checksum offload for encapsulated packets, hence enabling netdev feature flag NETIF_F_GSO_UDP_TUNNEL_CSUM. Signed-off-by:
-
Arjun Vynipadath authored
GRO is done by cxgb4/cxgb4vf. Hence set NETIF_F_GRO flag for both cxgb4/cxgb4vf. Cleaned up VLAN netdev features in cxgb4vf. Also fixed NETIF_F_HIGHDMA being set unconditionally for vlan netdev features. Signed-off-by:
-
Eli Britstein authored
The csum calculation is different for IPv4/6. For VLAN packets, tc_skb_protocol returns the VLAN protocol rather than the packet's one (e.g. IPv4/6), so csum is not calculated. Furthermore, VLAN may not be stripped so csum is not calculated in this case too. Calculate the csum for those cases. Fixes: d8b9605d ("net: sched: fix skb->protocol use in case of accelerated vlan path") Signed-off-by:
Eli Britstein <elibr@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(struct boo) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
David S. Miller authored
Maxime Chevallier says: ==================== net: phy: marvell10g: Clean .get_features by using C45 helpers Recent work on C45 helpers by Heiner made the genphy_c45_pma_read_abilities function generic enough to use as a default .get_featutes implementation. This series removes the remaining redundant code in mv3310_get_features(), and makes the 2110 PHY use genphy_c45_pma_read_abilities() directly, since it doesn't have the issue with the wrong abilities being reported. ==================== Signed-off-by: -
Maxime Chevallier authored
Contrary to the 3310, the 2110 PHY correctly reports it's 2.5G/5G abilities. We can therefore use the genphy_c45_pma_read_abilities helper to build the list of features. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Maxime Chevallier authored
The genphy_c45_pma_read_abilities helper now sets the Autoneg ability in phydev->supported according to what the AN MMD reports. We therefore don't need to manually do that in mv3310_get_features(). Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Vlad Buslov authored
Tunnel key action params->tcft_enc_metadata is only set when action is TCA_TUNNEL_KEY_ACT_SET. However, metadata pointer is incorrectly dereferenced during tunnel key init and release without verifying that action is if correct type, which causes NULL pointer dereference. Metadata tunnel dst_cache is also leaked on action overwrite. Fix metadata handling: - Verify that metadata pointer is not NULL before dereferencing it in tunnel_key_init error handling code. - Move dst_cache destroy code into tunnel_key_release_params() function that is called in both action overwrite and release cases (fixes resource leak) and verifies that actions has correct type before dereferencing metadata pointer (fixes NULL pointer dereference). Oops with KASAN enabled during tdc tests execution: [ 261.080482] ================================================================== [ 261.088049] BUG: KASAN: null-ptr-deref in dst_cache_destroy+0x21/0xa0 [ 261.094613] Read of size 8 at addr 00000000000000b0 by task tc/2976 [ 261.102524] CPU: 14 PID: 2976 Comm: tc Not tainted 5.0.0-rc7+ #157 [ 261.108844] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 261.116726] Call Trace: [ 261.119234] dump_stack+0x9a/0xeb [ 261.122625] ? dst_cache_destroy+0x21/0xa0 [ 261.126818] ? dst_cache_destroy+0x21/0xa0 [ 261.131004] kasan_report+0x176/0x192 [ 261.134752] ? idr_get_next+0xd0/0x120 [ 261.138578] ? dst_cache_destroy+0x21/0xa0 [ 261.142768] dst_cache_destroy+0x21/0xa0 [ 261.146799] tunnel_key_release+0x3a/0x50 [act_tunnel_key] [ 261.152392] tcf_action_cleanup+0x2c/0xc0 [ 261.156490] tcf_generic_walker+0x4c2/0x5c0 [ 261.160794] ? tcf_action_dump_1+0x390/0x390 [ 261.165163] ? tunnel_key_walker+0x5/0x1a0 [act_tunnel_key] [ 261.170865] ? tunnel_key_walker+0xe9/0x1a0 [act_tunnel_key] [ 261.176641] tca_action_gd+0x600/0xa40 [ 261.180482] ? tca_get_fill.constprop.17+0x200/0x200 [ 261.185548] ? __lock_acquire+0x588/0x1d20 [ 261.189741] ? __lock_acquire+0x588/0x1d20 [ 261.193922] ? mark_held_locks+0x90/0x90 [ 261.197944] ? mark_held_locks+0x90/0x90 [ 261.202018] ? __nla_parse+0xfe/0x190 [ 261.205774] tc_ctl_action+0x218/0x230 [ 261.209614] ? tcf_action_add+0x230/0x230 [ 261.213726] rtnetlink_rcv_msg+0x3a5/0x600 [ 261.217910] ? lock_downgrade+0x2d0/0x2d0 [ 261.222006] ? validate_linkmsg+0x400/0x400 [ 261.226278] ? find_held_lock+0x6d/0xd0 [ 261.230200] ? match_held_lock+0x1b/0x210 [ 261.234296] ? validate_linkmsg+0x400/0x400 [ 261.238567] netlink_rcv_skb+0xc7/0x1f0 [ 261.242489] ? netlink_ack+0x470/0x470 [ 261.246319] ? netlink_deliver_tap+0x1f3/0x5a0 [ 261.250874] netlink_unicast+0x2ae/0x350 [ 261.254884] ? netlink_attachskb+0x340/0x340 [ 261.261647] ? _copy_from_iter_full+0xdd/0x380 [ 261.268576] ? __virt_addr_valid+0xb6/0xf0 [ 261.275227] ? __check_object_size+0x159/0x240 [ 261.282184] netlink_sendmsg+0x4d3/0x630 [ 261.288572] ? netlink_unicast+0x350/0x350 [ 261.295132] ? netlink_unicast+0x350/0x350 [ 261.301608] sock_sendmsg+0x6d/0x80 [ 261.307467] ___sys_sendmsg+0x48e/0x540 [ 261.313633] ? copy_msghdr_from_user+0x210/0x210 [ 261.320545] ? save_stack+0x89/0xb0 [ 261.326289] ? __lock_acquire+0x588/0x1d20 [ 261.332605] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 261.340063] ? mark_held_locks+0x90/0x90 [ 261.346162] ? do_filp_open+0x138/0x1d0 [ 261.352108] ? may_open_dev+0x50/0x50 [ 261.357897] ? match_held_lock+0x1b/0x210 [ 261.364016] ? __fget_light+0xa6/0xe0 [ 261.369840] ? __sys_sendmsg+0xd2/0x150 [ 261.375814] __sys_sendmsg+0xd2/0x150 [ 261.381610] ? __ia32_sys_shutdown+0x30/0x30 [ 261.388026] ? lock_downgrade+0x2d0/0x2d0 [ 261.394182] ? mark_held_locks+0x1c/0x90 [ 261.400230] ? do_syscall_64+0x1e/0x280 [ 261.406172] do_syscall_64+0x78/0x280 [ 261.411932] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 261.419103] RIP: 0033:0x7f28e91a8b87 [ 261.424791] Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 6a 2b 2c 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 80 00 00 00 00 53 48 89 f3 48 [ 261.448226] RSP: 002b:00007ffdc5c4e2d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 261.458183] RAX: ffffffffffffffda RBX: 000000005c73c202 RCX: 00007f28e91a8b87 [ 261.467728] RDX: 0000000000000000 RSI: 00007ffdc5c4e340 RDI: 0000000000000003 [ 261.477342] RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000c [ 261.486970] R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 [ 261.496599] R13: 000000000067b4e0 R14: 00007ffdc5c5248c R15: 00007ffdc5c52480 [ 261.506281] ================================================================== [ 261.516076] Disabling lock debugging due to kernel taint [ 261.523979] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 [ 261.534413] #PF error: [normal kernel read fault] [ 261.541730] PGD 8000000317400067 P4D 8000000317400067 PUD 316878067 PMD 0 [ 261.551294] Oops: 0000 [#1] SMP KASAN PTI [ 261.557985] CPU: 14 PID: 2976 Comm: tc Tainted: G B 5.0.0-rc7+ #157 [ 261.568306] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 261.578874] RIP: 0010:dst_cache_destroy+0x21/0xa0 [ 261.586413] Code: f4 ff ff ff eb f6 0f 1f 00 0f 1f 44 00 00 41 56 41 55 49 c7 c6 60 fe 35 af 41 54 55 49 89 fc 53 bd ff ff ff ff e8 ef 98 73 ff <49> 83 3c 24 00 75 35 eb 6c 4c 63 ed e8 de 98 73 ff 4a 8d 3c ed 40 [ 261.611247] RSP: 0018:ffff888316447160 EFLAGS: 00010282 [ 261.619564] RAX: 0000000000000000 RBX: ffff88835b3e2f00 RCX: ffffffffad1c5071 [ 261.629862] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: 0000000000000297 [ 261.640149] RBP: 00000000ffffffff R08: fffffbfff5dd4e89 R09: fffffbfff5dd4e89 [ 261.650467] R10: 0000000000000001 R11: fffffbfff5dd4e88 R12: 00000000000000b0 [ 261.660785] R13: ffff8883267a10c0 R14: ffffffffaf35fe60 R15: 0000000000000001 [ 261.671110] FS: 00007f28ea3e6400(0000) GS:ffff888364200000(0000) knlGS:0000000000000000 [ 261.682447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 261.691491] CR2: 00000000000000b0 CR3: 00000003178ae004 CR4: 00000000001606e0 [ 261.701283] Call Trace: [ 261.706374] tunnel_key_release+0x3a/0x50 [act_tunnel_key] [ 261.714522] tcf_action_cleanup+0x2c/0xc0 [ 261.721208] tcf_generic_walker+0x4c2/0x5c0 [ 261.728074] ? tcf_action_dump_1+0x390/0x390 [ 261.734996] ? tunnel_key_walker+0x5/0x1a0 [act_tunnel_key] [ 261.743247] ? tunnel_key_walker+0xe9/0x1a0 [act_tunnel_key] [ 261.751557] tca_action_gd+0x600/0xa40 [ 261.757991] ? tca_get_fill.constprop.17+0x200/0x200 [ 261.765644] ? __lock_acquire+0x588/0x1d20 [ 261.772461] ? __lock_acquire+0x588/0x1d20 [ 261.779266] ? mark_held_locks+0x90/0x90 [ 261.785880] ? mark_held_locks+0x90/0x90 [ 261.792470] ? __nla_parse+0xfe/0x190 [ 261.798738] tc_ctl_action+0x218/0x230 [ 261.805145] ? tcf_action_add+0x230/0x230 [ 261.811760] rtnetlink_rcv_msg+0x3a5/0x600 [ 261.818564] ? lock_downgrade+0x2d0/0x2d0 [ 261.825433] ? validate_linkmsg+0x400/0x400 [ 261.832256] ? find_held_lock+0x6d/0xd0 [ 261.838624] ? match_held_lock+0x1b/0x210 [ 261.845142] ? validate_linkmsg+0x400/0x400 [ 261.851729] netlink_rcv_skb+0xc7/0x1f0 [ 261.857976] ? netlink_ack+0x470/0x470 [ 261.864132] ? netlink_deliver_tap+0x1f3/0x5a0 [ 261.870969] netlink_unicast+0x2ae/0x350 [ 261.877294] ? netlink_attachskb+0x340/0x340 [ 261.883962] ? _copy_from_iter_full+0xdd/0x380 [ 261.890750] ? __virt_addr_valid+0xb6/0xf0 [ 261.897188] ? __check_object_size+0x159/0x240 [ 261.903928] netlink_sendmsg+0x4d3/0x630 [ 261.910112] ? netlink_unicast+0x350/0x350 [ 261.916410] ? netlink_unicast+0x350/0x350 [ 261.922656] sock_sendmsg+0x6d/0x80 [ 261.928257] ___sys_sendmsg+0x48e/0x540 [ 261.934183] ? copy_msghdr_from_user+0x210/0x210 [ 261.940865] ? save_stack+0x89/0xb0 [ 261.946355] ? __lock_acquire+0x588/0x1d20 [ 261.952358] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 261.959468] ? mark_held_locks+0x90/0x90 [ 261.965248] ? do_filp_open+0x138/0x1d0 [ 261.970910] ? may_open_dev+0x50/0x50 [ 261.976386] ? match_held_lock+0x1b/0x210 [ 261.982210] ? __fget_light+0xa6/0xe0 [ 261.987648] ? __sys_sendmsg+0xd2/0x150 [ 261.993263] __sys_sendmsg+0xd2/0x150 [ 261.998613] ? __ia32_sys_shutdown+0x30/0x30 [ 262.004555] ? lock_downgrade+0x2d0/0x2d0 [ 262.010236] ? mark_held_locks+0x1c/0x90 [ 262.015758] ? do_syscall_64+0x1e/0x280 [ 262.021234] do_syscall_64+0x78/0x280 [ 262.026500] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 262.033207] RIP: 0033:0x7f28e91a8b87 [ 262.038421] Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 6a 2b 2c 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 80 00 00 00 00 53 48 89 f3 48 [ 262.060708] RSP: 002b:00007ffdc5c4e2d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 262.070112] RAX: ffffffffffffffda RBX: 000000005c73c202 RCX: 00007f28e91a8b87 [ 262.079087] RDX: 0000000000000000 RSI: 00007ffdc5c4e340 RDI: 0000000000000003 [ 262.088122] RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000c [ 262.097157] R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 [ 262.106207] R13: 000000000067b4e0 R14: 00007ffdc5c5248c R15: 00007ffdc5c52480 [ 262.115271] Modules linked in: act_tunnel_key act_skbmod act_simple act_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 act_csum libcrc32c act_meta_skbtcindex act_meta_skbprio act_meta_mark act_ife ife act_police act_sample psample act_gact veth nfsv3 nfs_acl nfs lockd grace fscache bridge stp llc intel_rapl sb_edac mlx5_ib x86_pkg_temp_thermal sunrpc intel_powerclamp coretemp ib_uverbs kvm_intel ib_core kvm irqbypass mlx5_core crct10dif_pclmul crc32_pclmul crc32c_intel igb ghash_clmulni_intel intel_cstate mlxfw iTCO_wdt devlink intel_uncore iTCO_vendor_support ipmi_ssif ptp mei_me intel_rapl_perf ioatdma joydev pps_core ses mei i2c_i801 pcspkr enclosure lpc_ich dca wmi ipmi_si ipmi_devintf ipmi_msghandler acpi_pad acpi_power_meter pcc_cpufreq ast i2c_algo_bit drm_kms_helper ttm drm mpt3sas raid_class scsi_transport_sas [ 262.204393] CR2: 00000000000000b0 [ 262.210390] ---[ end trace 2e41d786f2c7901a ]--- [ 262.226790] RIP: 0010:dst_cache_destroy+0x21/0xa0 [ 262.234083] Code: f4 ff ff ff eb f6 0f 1f 00 0f 1f 44 00 00 41 56 41 55 49 c7 c6 60 fe 35 af 41 54 55 49 89 fc 53 bd ff ff ff ff e8 ef 98 73 ff <49> 83 3c 24 00 75 35 eb 6c 4c 63 ed e8 de 98 73 ff 4a 8d 3c ed 40 [ 262.258311] RSP: 0018:ffff888316447160 EFLAGS: 00010282 [ 262.266304] RAX: 0000000000000000 RBX: ffff88835b3e2f00 RCX: ffffffffad1c5071 [ 262.276251] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: 0000000000000297 [ 262.286208] RBP: 00000000ffffffff R08: fffffbfff5dd4e89 R09: fffffbfff5dd4e89 [ 262.296183] R10: 0000000000000001 R11: fffffbfff5dd4e88 R12: 00000000000000b0 [ 262.306157] R13: ffff8883267a10c0 R14: ffffffffaf35fe60 R15: 0000000000000001 [ 262.316139] FS: 00007f28ea3e6400(0000) GS:ffff888364200000(0000) knlGS:0000000000000000 [ 262.327146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 262.335815] CR2: 00000000000000b0 CR3: 00000003178ae004 CR4: 00000000001606e0 Fixes: 41411e2f ("net/sched: act_tunnel_key: Add dst_cache support") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
- 27 Feb, 2019 15 commits
-
-
Pankaj Bansal authored
Add support for Generic Mux controls, when Mdio mux node is a consumer of mux produced by some other device. Signed-off-by:
Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by:
-
Pankaj Bansal authored
When we use the bindings defined in Documentation/devicetree/bindings/mux to define mdio mux in producer and consumer terms, it results in two devices. one is mux producer and other is mux consumer. Add the bindings needed for Mdio mux consumer devices. Signed-off-by:
-
wenxu authored
Current fib_multipath_hash_policy can make hash based on the L3 or L4. But it only work on the outer IP. So a specific tunnel always has the same hash value. But a specific tunnel may contain so many inner connections. This patch provide a generic multipath_hash in floi_common. It can make a user-define hash which can mix with L3 or L4 hash. Signed-off-by:
wenxu <wenxu@ucloud.cn> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: Remove switchdev_ops This patch series completes the removal of the switchdev_ops by converting switchdev_port_attr_set() to use either the blocking (process) or non-blocking (atomic) notifier since we typically need to deal with both depending on where in the bridge code we get called from. This was tested with the forwarding selftests and DSA hardware. Ido, hopefully this captures your comments done on v1, if not, can you illustrate with some pseudo-code what you had in mind if that's okay? Changes in v3: - added Reviewed-by tags from Ido where relevant - added missing notifier_to_errno() in net/bridge/br_switchdev.c when calling the atomic notifier for PRE_BRIDGE_FLAGS - kept mlxsw_sp_switchdev_init() in mlxsw/ Changes in v2: - do not check for SWITCHDEV_F_DEFER when calling the blocking notifier and instead directly call the atomic notifier from the single location where this is required ==================== Signed-off-by: -
Florian Fainelli authored
Now that we have converted all possible callers to using a switchdev notifier for attributes we do not have a need for implementing switchdev_ops anymore, and this can be removed from all drivers the net_device structure. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Florian Fainelli authored
Drop switchdev_ops.switchdev_port_attr_set. Drop the uses of this field from all clients, which were migrated to use switchdev notification in the previous patches. Add a new function switchdev_port_attr_notify() that sends the switchdev notifications SWITCHDEV_PORT_ATTR_SET and calls the blocking (process) notifier chain. We have one odd case within net/bridge/br_switchdev.c with the SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS attribute identifier that requires executing from atomic context, we deal with that one specifically. Drop __switchdev_port_attr_set() and update switchdev_port_attr_set() likewise. Signed-off-by:
-
Florian Fainelli authored
Following patches will change the way we communicate setting a port's attribute and use a blocking notifier to perform those tasks. Prepare ethsw to support receiving notifier events targeting SWITCHDEV_PORT_ATTR_SET and simply translate that into the existing swdev_port_attr_set() call. Signed-off-by:
-
Florian Fainelli authored
Following patches will change the way we communicate setting a port's attribute and use notifiers to perform those tasks. Ocelot does not currently have an atomic notifier registered for switchdev events, so we need to register one in order to deal with atomic context SWITCHDEV_PORT_ATTR_SET events. Signed-off-by:
-
Florian Fainelli authored
Following patches will change the way we communicate setting a port's attribute and use a notifier to perform those tasks. Prepare mlxsw to support receiving notifier events targeting SWITCHDEV_PORT_ATTR_SET and utilize the switchdev_handle_port_attr_set() to handle stacking of devices. Reviewed-by:
-
Florian Fainelli authored
Following patches will change the way we communicate setting a port's attribute and use notifiers towards that goal. Prepare DSA to support receiving notifier events targeting SWITCHDEV_PORT_ATTR_SET from both atomic and process context and use a small helper to translate the event notifier into something that dsa_slave_port_attr_set() can process. Signed-off-by:
-
Florian Fainelli authored
Following patches will change the way we communicate setting a port's attribute and use notifiers towards that goal. Prepare rocker to support receiving notifier events targeting SWITCHDEV_PORT_ATTR_SET from both atomic and process context and use a small helper to translate the event notifier into something that rocker_port_attr_set() can process. Signed-off-by:
-
Florian Fainelli authored
In preparation for allowing switchdev enabled drivers to veto specific attribute settings from within the context of the caller, introduce a new switchdev notifier type for port attributes. Suggested-by:
-
Vlad Buslov authored
This reverts commit 31a99848 ("net: sched: fw: don't set arg->stop in fw_walk() when empty") Cls API function tcf_proto_is_empty() was changed in commit 6676d5e4 ("net: sched: set dedicated tcf_walker flag when tp is empty") to no longer depend on arg->stop to determine that classifier instance is empty. Instead, it adds dedicated arg->nonempty field, which makes the fix in fw classifier no longer necessary. Signed-off-by:
-
Li RongQing authored
Initialize the .cmd member by using a designated struct initializer. This fixes warning of missing field initializers, and makes code a little easier to read. Signed-off-by:
Li RongQing <lirongqing@baidu.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Leslie Monis authored
Use div_u64() to resolve build failures on 32-bit platforms. Fixes: 3f7ae5f3 ("net: sched: pie: add more cases to auto-tune alpha and beta") Signed-off-by:
Leslie Monis <lesliemonis@gmail.com> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
-
- 26 Feb, 2019 16 commits
-
-
Li RongQing authored
This pointer is RCU protected, so proper primitives should be used. Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: cleanups for linux-5.1 This small patch series cleanups few things, and add a small timewait optimization for hosts not using md5. ==================== Signed-off-by: -
Eric Dumazet authored
tso_fragment() is only called for packets still in write queue. Remove the tcp_queue parameter to make this more obvious, even if the comment clearly states this. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
This might speedup tcp_twsk_destructor() a bit, avoiding a cache line miss. Signed-off-by:
-
Eric Dumazet authored
We prefer static_branch_unlikely() over static_key_false() these days. Signed-off-by:
-
Eric Dumazet authored
This helper is only used from tcp_add_write_queue_tail(), and does not make the code more readable. Signed-off-by:
-
Eric Dumazet authored
This helper is used only once, and its name is no longer relevant. Signed-off-by:
-
Vlad Buslov authored
Comment in tdc_config.py recommends putting customizations in tdc_config_local.py file that wasn't included in gitignore. Add the local config file to gitignore. Signed-off-by:
-
Vlad Buslov authored
Function walker_check_empty() incorrectly verifies that tp pointer is not NULL, instead of actual filter pointer. Fix conditional to check the right pointer. Adjust filter pointer naming accordingly to other cls API functions. Fixes: 6676d5e4 ("net: sched: set dedicated tcf_walker flag when tp is empty") Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Leslie Monis authored
Fix the incorrect reference link to RFC 8033 Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_link_ksettings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3062:5: warning: variable 'autoneg_status' set but not used [-Wunused-but-set-variable] It's not used since commit 475b33cb ("mlxsw: spectrum: Remove unsupported eth_proto_lp_advertise field in PTYS") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
David S. Miller authored
Roopa Prabhu says: ==================== vxlan: create and changelink extack support This series adds extack support to changelink paths. In the process re-factors flag sets to a separate helper. Also adds some changelink testcases to rtnetlink.sh (This series was initially part of another series that tried to support changelink for more attributes. But after some feedback from sabrina, i have dropped the 'support changelink for more attributes' part because some of them cannot be supported today or may require additional use-case handling code. These can be done separately as and when we see the need for it.) ==================== Signed-off-by: -
Roopa Prabhu authored
This patch extends rtnetlink.sh to cover some vxlan flag netlink attribute sets. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Roopa Prabhu authored
This patch adds extack coverage in vxlan link create and changelink paths. Introduces a new helper vxlan_nl2flags to consolidate flag attribute validation. thanks to Johannes Berg for some tips to construct the generic vxlan flag extack strings. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== devlink: make ethtool compat reliable This is a follow up to the series which added device flash updates via devlink. I went with the approach of adding a new NDO in the end. It seems to end up looking cleaner. First patch removes the option to build devlink as a module. Users can still decide to not build it, but the module option ends up not being worth the maintenance cost. Next two patches add a NDO which can be used to ask the driver to return a devlink instance associated with a given netdev, instead of iterating over devlink ports. Drivers which implement this NDO must take into account the potential impact on the visibility of the devlink instance. With the new NDO in place we can remove NFP ethtool flash update code. Fifth patch makes sure we hold a reference to dev while callbacks are active. Last but not least the NULL-check of devlink->ops is moved to instance allocation time. Last but not least missing checks for devlink->ops are added. There is currently no driver registering devlink without ops, so can just fix this in -next. v2 (Michal): add netdev_to_devlink() in patch 3. v3 (Florian): - add missing checks for devlink->ops; - move locking/holding into devlink_compat_ functions. v4 (Jiri): - hold devlink_mutex around callbacks (patch 2); - require non-NULL ops (patch 6). ==================== Signed-off-by: -
Jakub Kicinski authored
Commit 76726ccb ("devlink: add flash update command") and commit 2d8dc5bb ("devlink: Add support for reload") access devlink ops without NULL-checking. There is, however, no driver which would pass in NULL ops, so let's just make that a requirement. Remove the now unnecessary NULL-checking. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
-
