- 24 May, 2019 2 commits
-
-
Krzysztof Kozlowski authored
Drop the reference to "parallel-ports" and remote endpoint's parent nodes obtained previously with of_get_child_by_name() and of_get_parent() respectively. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Bartlomiej Zolnierkiewicz authored
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c564 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
- 23 May, 2019 28 commits
-
-
Mauro Carvalho Chehab authored
While correct, the code is too complex for smatch to undersdand that protocol will always be initialized: drivers/media/rc/rc-main.c:1531 store_wakeup_protocols() error: uninitialized symbol 'protocol'. drivers/media/rc/rc-main.c:1541 store_wakeup_protocols() error: uninitialized symbol 'protocol'. So, change it a little bit in order to avoid such warning. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Jungo Lin authored
In v4l2-compliance utility, test MEDIA_IOC_ENUM_ENTITIES will check whether reserved field of media_links_enum filled with zero. However, for 32 bit program, the reserved field is missing copy from kernel space to user space in media_device_enum_links32 function. This patch adds the cleaning a reserved field logic in media_device_enum_links32 function. Signed-off-by:
Jungo Lin <jungo.lin@mediatek.com> Signed-off-by:
-
Mukesh Ojha authored
Clean up of resources should be in reverse order of vpss_init(). Fix this inside vpss_exit(). Signed-off-by:
Mukesh Ojha <mojha@codeaurora.org> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Kangjie Lu authored
In case ioremap fails, the fix returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Acked-by:
-
Javier Martinez Canillas authored
The driver has runtime but no build time dependency with IMX_IPUV3_CORE, so can be built for testing purposes if COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that the driver is not affected by changes that could cause build regressions. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
-
Masahiro Yamada authored
Remove the header search path to the current directory. The compiler will search headers in the current directory by using #include "..." instead of #include <...> Also, change TRACE_INCLUDE_PATH to point to the location of trace.h. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Stefan Agner authored
Embedded systems often connect to sensors or other multimedia subdevices directly. Currently, to be able to select such a subdevice (e.g. CONFIG_VIDEO_OV5640) disabling of the auto- select config option is needed (CONFIG_MEDIA_SUBDRV_AUTOSELECT). This is inconvenient as the ancillary drivers for a particular device then need to be selected manually. Allow to select drivers manually while keeping the auto-select feature in case EXPERT (selected by EMBEDDED) is enabled. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Sakari Ailus authored
The size argument of the alloc memop, which allocates buffer memory, is page aligned. Document it as such in the only caller as well as ops documentation. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Sakari Ailus authored
buf->size is an unsigned long; casting that to int will lead to an overflow if buf->size exceeds INT_MAX. Fix this by changing the type to unsigned long instead. This is possible as the buf->size is always aligned to PAGE_SIZE, and therefore the size will never have values lesser than 0. Note on backporting to stable: the file used to be under drivers/media/v4l2-core, it was moved to the current location after 4.14. Signed-off-by:
-
Sakari Ailus authored
PAGE_ALIGN() may wrap the buffer size around to 0. Prevent this by checking that the aligned value is not smaller than the unaligned one. Note on backporting to stable: the file used to be under drivers/media/v4l2-core, it was moved to the current location after 4.14. Signed-off-by:
-
Bingbu Cao authored
The ipu3 GDC function need some envelope to do filtering and the minimal envelope size(GDC in - out) for ipu3 should be 4. Current value 4 was defined for older version GDC, this patch correct it. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Nicholas Mc Guire authored
No need for a high-accuracy delay here as long as it is more than 2 milliseconds this should be ok - as it is non-atomic context it will be not be precise 2 milliseconds so giving the hrtimer subsystem 50 microseconds to merge timers and reduce interrupts. Signed-off-by:
Nicholas Mc Guire <hofrat@opentech.at> Signed-off-by:
-
Lubomir Rintel authored
The commit 05fed816 ("[media] marvell-ccic: add MIPI support for marvell-ccic driver") that claimed to add CSI2 turned on C0_EOF_VSYNC for parallel bus without a very good explanation. That broke camera on OLPC XO-1.75 which precisely uses a sensor on a parallel bus. Revert that chunk. Tested on an OLPC XO-1.75. Fixes: 05fed816 ("[media] marvell-ccic: add MIPI support for marvell-ccic driver") Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Lubomir Rintel authored
The commit d790b7ed ("[media] vb2-dma-sg: move dma_(un)map_sg here") left dma_desc_nent unset. It previously contained the number of DMA descriptors as returned from dma_map_sg(). We can now (since the commit referred to above) obtain the same value from the sg_table and drop dma_desc_nent altogether. Tested on OLPC XO-1.75 machine. Doesn't affect the OLPC XO-1's Cafe driver, since that one doesn't do DMA. [mchehab+samsung@kernel.org: fix a checkpatch warning] Fixes: d790b7ed ("[media] vb2-dma-sg: move dma_(un)map_sg here") Signed-off-by:
-
Lubomir Rintel authored
Add Marvell MMP2 camera host interface. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sakari Ailus authored
C-PHY doesn't use a clock lane, hence the test for the clock lane when there isn't one is faulty. Rework the test for the conflicting clock lane. Signed-off-by:
-
Akinobu Mita authored
If the v4l2 controls are set up for autofoo/foo-type handling by calling v4l2_ctrl_auto_cluster() with the last set_volatile argument setting true, each non-auto control doesn't need to be flagged V4L2_CTRL_FLAG_VOLATILE. Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
Setting the value of the V4L2_CID_VFLIP control is currently ignored. Because V4L2_CID_HFLIP and V4L2_CID_VFLIP are independently controlled in s_ctrl() but these controls belong to the same cluster and the first control is V4L2_CID_HFLIP. Fix it by not clustering these controls. Also correct erroneous updating register bit for vertical flip. Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Akinobu Mita authored
If the requested framesize by VIDIOC_SUBDEV_S_FMT is larger than supported framesizes, it causes an out of bounds array access and the resulting framesize is unexpected. Avoid out of bounds array access and select the default framesize. Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Akinobu Mita authored
Avoid returning without decrement the usage count in s_ctrl(). Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Hans Verkuil authored
Document which capability is required, rather than just saying that "root permissions" are required. Signed-off-by:
-
Hans Verkuil authored
Some displays pull down the HPD when in standby, but CEC is still active and the display can be woken up by sending an Image View On or Text View On CEC command. The CEC specification doesn't tell you what the initiator should be for such a command (without a HPD it's unclear if the CEC adapter can claim a logical address). This patch allows any initiator value when there is no HPD for the Image/Text View On commands and for the Ping command. Signed-off-by:
-
Hans Verkuil authored
If this flag is set, then check for root permissions and skip all message checks expect for the core checks (i.e. validate the length etc.). Signed-off-by:
-
Hans Verkuil authored
Document this new cec_msg flag. Signed-off-by:
-
Hans Verkuil authored
This adds the userspace API to send raw unchecked CEC messages. This will require root permissions. Signed-off-by:
-
Hans Verkuil authored
This ensures all the cec_msg checks are done in the same place. Signed-off-by:
-
Hans Verkuil authored
The code that fills in the CEC_MSG_CDC_MESSAGE physical address is now done after the sanity checks. It also only does this if the message length is >= 4 (i.e. there is room for the physical address). Signed-off-by:
-
Hans Verkuil authored
Due to limitations in gpiolib it was impossible to disable the interrupt of an input gpio and then switch it to gpio output and drive it. The only way to achieve that was to free the interrupt first, then switch the direction. When going back to gpio input and using interrupts to read the gpio pin you had to request the irq again. This limitation was lifted in gpiolib in kernel 4.20, but the cec-gpio driver was still using the old workaround implementation. This patch updates the cec-gpio driver to just enable and disable the irq. Signed-off-by:
-
- 22 May, 2019 8 commits
-
-
Hans Verkuil authored
The cec device node can be used right after it was created, but that leaves a race condition where the device was created, but devnode->registered was still false. So an ioctl() would result in an error. So set it to true before calling cdev_device_add() and to false again if cdev_device_add returned an error. Signed-off-by:
-
Neil Armstrong authored
Remove comment and replace with the appropriate SPDX identifier. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Stefan Brüns authored
All error cases inside the function already report errors via dev_err(), and dvb_usb_v2_generic_rw also reports all error cases, so there is no silent code path when an error has occurred. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by:
-
Stefan Brüns authored
Errors are already reported by the common code in dvb_usb_v2_generic_io (which dvbsky_usb_generic_rw is a wrapper of), so there is no reason report the error again. Signed-off-by:
-
Stefan Brüns authored
actual_length != wlen is the only error path which does not generate an error message. Adding an error message here allows to report a more specific error and to remove the error reporting from the call sites. Also clean up the error paths - in case of an error, the remaining code is skipped, and ret is returned. Skip setting ret and return immediately (no cleanup necessary). Signed-off-by:
-
Sean Young authored
au0828_usb_disconnect() gets the au0828_dev struct via usb_get_intfdata, so it needs to set up for the error paths. Reported-by: syzbot+357d86bcb4cca1a2f572@syzkaller.appspotmail.com Signed-off-by:
-
Oliver Neukum authored
dvb_usb_device_exit() frees and uses the device name in that order. Fix by storing the name in a buffer before freeing it. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+26ec41e9f788b3eba396@syzkaller.appspotmail.com Signed-off-by:
-
Daniel Gomez authored
MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT OF mathing mechanism and register it. Before this patch: modinfo drivers/media/rc/ir-spi.ko | grep alias After this patch: modinfo drivers/media/rc/ir-spi.ko | grep alias alias: of:N*T*Cir-spi-ledC* alias: of:N*T*Cir-spi-led Reported-by:
Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by:
Daniel Gomez <dagmcr@gmail.com> Signed-off-by:
-
- 21 May, 2019 2 commits
-
-
Brad Love authored
Minimum, maximum, and stepsize taken from Silicon Labs reference. Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
-
Stanimir Varbanov authored
Venus v4 doesn't send ALLOC_MODE property and thus parser doesn't recognize it as dynamic buffer (for OUTPUT/OUTPUT2 type of buffers) make it obvious in the helper function. Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
