- 22 Jun, 2020 40 commits
-
-
Qu Wenruo authored
[ Upstream commit cbab8ade ] [BUG] For the following operation, qgroup is guaranteed to be screwed up due to snapshot adding to a new qgroup: # mkfs.btrfs -f $dev # mount $dev $mnt # btrfs qgroup en $mnt # btrfs subv create $mnt/src # xfs_io -f -c "pwrite 0 1m" $mnt/src/file # sync # btrfs qgroup create 1/0 $mnt/src # btrfs subv snapshot -i 1/0 $mnt/src $mnt/snapshot # btrfs qgroup show -prce $mnt/src qgroupid rfer excl max_rfer max_excl parent child -------- ---- ---- -------- -------- ------ ----- 0/5 16.00KiB 16.00KiB none none --- --- 0/257 1.02MiB 16.00KiB none none --- --- 0/258 1.02MiB 16.00KiB none none 1/0 --- 1/0 0.00B 0.00B none none --- 0/258 ^^^^^^^^^^^^^^^^^^^^ [CAUSE] The problem is in btrfs_qgroup_inherit(), we don't have good enough check to determine if the new relation would break the existing accounting. Unlike btrfs_add_qgroup_relation(), which has proper check to determine if we can do quick update without a rescan, in btrfs_qgroup_inherit() we can even assign a snapshot to multiple qgroups. [FIX] Fix it by manually marking qgroup inconsistent for snapshot inheritance. For subvolume creation, since all its extents are exclusively owned, we don't need to rescan. In theory, we should call relation check like quick_update_accounting() when doing qgroup inheritance and inform user about qgroup accounting inconsistency. But we don't have good mechanism to relay that back to the user in the snapshot creation context, thus we can only silently mark the qgroup inconsistent. Anyway, user shouldn't use qgroup inheritance during snapshot creation, and should add qgroup relationship after snapshot creation by 'btrfs qgroup assign', which has a much better UI to inform user about qgroup inconsistent and kick in rescan automatically. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Finn Thain authored
[ Upstream commit bcc44f6b ] There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache(). This avoids a boot crash which appeared in v5.4. printk: console [ttyS0] enabled printk: bootconsole [debug0] disabled printk: bootconsole [debug0] disabled Calibrating delay loop... 9.61 BogoMIPS (lpj=48064) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear) NET: Registered protocol family 16 Data read fault at 0x00000000 in Super Data (pc=0x8a6a) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: PC: [<00008a6a>] via_flush_cache+0x12/0x2c SR: 2700 SP: 01c1fe3c a2: 01c24000 d0: 00001119 d1: 0000000c d2: 00012000 d3: 0000000f d4: 01c06840 d5: 00033b92 a0: 00000000 a1: 00000000 Process swapper (pid: 1, task=01c24000) Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0 baddr=00008a6e dibuf=0000004e ver=f Stack from 01c1fec4: 01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40 01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000 00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2 00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88 004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4 0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000 Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c [<00010080>] fix_dnrm+0x2/0x18 [<0000792e>] cache_push+0x46/0x5a [<00006b40>] arch_dma_prep_coherent+0x60/0x6e [<00040000>] switched_to_dl+0x76/0xd0 [<004a545e>] dma_atomic_pool_init+0x4e/0x188 [<00040000>] switched_to_dl+0x76/0xd0 [<00033b92>] parse_args+0x0/0x370 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<000021e2>] do_one_initcall+0x34/0x1be [<00033b92>] parse_args+0x0/0x370 [<0038507a>] strcpy+0x0/0x1e [<000021ae>] do_one_initcall+0x0/0x1be [<00020002>] do_proc_dointvec_conv+0x54/0x74 [<0049f938>] kernel_init_freeable+0x126/0x190 [<0049f94c>] kernel_init_freeable+0x13a/0x190 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<00041798>] complete+0x0/0x3c [<000b9b0c>] kfree+0x0/0x20a [<0038df98>] schedule+0x0/0xd0 [<0038d604>] kernel_init+0x0/0xda [<0038d610>] kernel_init+0xc/0xda [<0038d604>] kernel_init+0x0/0xda [<00002d38>] ret_from_kernel_thread+0xc/0x14 Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039 Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Thanks to Stan Johnson for capturing the console log and running git bisect. Git bisect said commit 8e3a68fb ("dma-mapping: make dma_atomic_pool_init self-contained") is the first "bad" commit. I don't know why. Perhaps mach_l2_flush first became reachable with that commit. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-and-tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Cc: Joshua Thompson <funaho@jurai.org> Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.1589949122.git.fthain@telegraphics.com.auSigned-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Arvind Sankar authored
[ Upstream commit 67d631b7 ] This currently leaks kernel physical addresses into userspace. Signed-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Dave Hansen <dave.hansen@intel.com> Link: https://lkml.kernel.org/r/20200229231120.1147527-1-nivedita@alum.mit.eduSigned-off-by:
-
Nicolas Toromanoff authored
[ Upstream commit 10b89c43 ] Ensure CRC algorithm is registered only once in crypto framework when there are several instances of CRC devices. Update the CRC device list management to avoid that only the first CRC instance is used. Fixes: b51dbe90 ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by:
Nicolas Toromanoff <nicolas.toromanoff@st.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Nicolas Toromanoff authored
[ Upstream commit a8cc3128 ] Fix wrong crc32 initialisation value: "alg: shash: stm32_crc32 test failed (wrong result) on test vector 0, cfg="init+update+final aligned buffer" cra_name="crc32c" expects an init value of 0XFFFFFFFF, cra_name="crc32" expects an init value of 0. Fixes: b51dbe90 ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by:
-
Nicolas Toromanoff authored
[ Upstream commit 49c2c082 ] Allow use of crc_update without prior call to crc_init. And change (and fix) driver to use CRC device even on unaligned buffers. Fixes: b51dbe90 ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by:
-
Serge Semin authored
[ Upstream commit ed26aacf ] Loops-per-jiffies is a special number which represents a number of noop-loop cycles per CPU-scheduler quantum - jiffies. As you understand aside from CPU-specific implementation it depends on the CPU frequency. So when a platform has the CPU frequency fixed, we have no problem and the current udelay interface will work just fine. But as soon as CPU-freq driver is enabled and the cores frequency changes, we'll end up with distorted udelay's. In order to fix this we have to accordinly adjust the per-CPU udelay_val (the same as the global loops_per_jiffy) number. This can be done in the CPU-freq transition event handler. We subscribe to that event in the MIPS arch time-inititalization method. Co-developed-by:
Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Serge Semin authored
[ Upstream commit bbb5946e ] Indeed according to the MIPS32 Privileged Resource Architecgture the MAAR pair register address field either takes [12:31] bits for non-XPA systems and [12:55] otherwise. In any case the current address mask is just wrong for 64-bit and 32-bits XPA chips. So lets extend it to 59-bits of physical address value. This shall cover the 64-bits architecture and systems with XPA enabled, and won't cause any problem for non-XPA 32-bit systems, since address values exceeding the architecture specific MAAR mask will be just truncated with setting zeros in the unsupported upper bits. Co-developed-by:
-
Arvind Sankar authored
[ Upstream commit 5214028d ] For the 32-bit kernel, as described in 6d92bc9d ("x86/build: Build compressed x86 kernels as PIE"), pre-2.26 binutils generates R_386_32 relocations in PIE mode. Since the startup code does not perform relocation, any reloc entry with R_386_32 will remain as 0 in the executing code. Commit 974f221c ("x86/boot: Move compressed kernel to the end of the decompression buffer") added a new symbol _end but did not mark it hidden, which doesn't give the correct offset on older linkers. This causes the compressed kernel to be copied beyond the end of the decompression buffer, rather than flush against it. This region of memory may be reserved or already allocated for other purposes by the bootloader. Mark _end as hidden to fix. This changes the relocation from R_386_32 to R_386_RELATIVE even on the pre-2.26 binutils. For 64-bit, this is not strictly necessary, as the 64-bit kernel is only built as PIE if the linker supports -z noreloc-overflow, which implies binutils-2.27+, but for consistency, mark _end as hidden here too. The below illustrates the before/after impact of the patch using binutils-2.25 and gcc-4.6.4 (locally compiled from source) and QEMU. Disassembly before patch: 48: 8b 86 60 02 00 00 mov 0x260(%esi),%eax 4e: 2d 00 00 00 00 sub $0x0,%eax 4f: R_386_32 _end Disassembly after patch: 48: 8b 86 60 02 00 00 mov 0x260(%esi),%eax 4e: 2d 00 f0 76 00 sub $0x76f000,%eax 4f: R_386_RELATIVE *ABS* Dump from extract_kernel before patch: early console in extract_kernel input_data: 0x0207c098 <--- this is at output + init_size input_len: 0x0074fef1 output: 0x01000000 output_len: 0x00fa63d0 kernel_total_size: 0x0107c000 needed_size: 0x0107c000 Dump from extract_kernel after patch: early console in extract_kernel input_data: 0x0190d098 <--- this is at output + init_size - _end input_len: 0x0074fef1 output: 0x01000000 output_len: 0x00fa63d0 kernel_total_size: 0x0107c000 needed_size: 0x0107c000 Fixes: 974f221c ("x86/boot: Move compressed kernel to the end of the decompression buffer") Signed-off-by:
-
Pali Rohár authored
[ Upstream commit 3aa42bae ] The mwifiex_cfg80211_dump_station() uses static variable for iterating over a linked list of all associated stations (when the driver is in UAP role). This has a race condition if .dump_station is called in parallel for multiple interfaces. This corruption can be triggered by registering multiple SSIDs and calling, in parallel for multiple interfaces iw dev <iface> station dump [16750.719775] Unable to handle kernel paging request at virtual address dead000000000110 ... [16750.899173] Call trace: [16750.901696] mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex] [16750.907824] nl80211_dump_station+0xbc/0x278 [cfg80211] [16750.913160] netlink_dump+0xe8/0x320 [16750.916827] netlink_recvmsg+0x1b4/0x338 [16750.920861] ____sys_recvmsg+0x7c/0x2b0 [16750.924801] ___sys_recvmsg+0x70/0x98 [16750.928564] __sys_recvmsg+0x58/0xa0 [16750.932238] __arm64_sys_recvmsg+0x28/0x30 [16750.936453] el0_svc_common.constprop.3+0x90/0x158 [16750.941378] do_el0_svc+0x74/0x90 [16750.944784] el0_sync_handler+0x12c/0x1a8 [16750.948903] el0_sync+0x114/0x140 [16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060) [16750.958583] ---[ end trace c8ad181c2f4b8576 ]--- This patch drops the use of the static iterator, and instead every time the function is called iterates to the idx-th position of the linked-list. It would be better to convert the code not to use linked list for associated stations storage (since the chip has a limited number of associated stations anyway - it could just be an array). Such a change may be proposed in the future. In the meantime this patch can backported into stable kernels in this simple form. Fixes: 8baca1a3 ("mwifiex: dump station support in uap mode") Signed-off-by:
Pali Rohár <pali@kernel.org> Acked-by:
Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.orgSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit beb12813 ] Seven years ago we tried to fix a leak but actually introduced a double free instead. It was an understandable mistake because the code was a bit confusing and the free was done in the wrong place. The "skb" pointer is freed in both _rtl_usb_tx_urb_setup() and _rtl_usb_transmit(). The free belongs _rtl_usb_transmit() instead of _rtl_usb_tx_urb_setup() and I've cleaned the code up a bit to hopefully make it more clear. Fixes: 36ef0b47 ("rtlwifi: usb: add missing freeing of skbuff") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Erez Shitrit authored
[ Upstream commit 8b46d424 ] After enabled loopback packets for IPoIB, we need to drop these packets that this HCA has replicated and came back to the same interface that sent them. Fixes: 4c6c615e ("net/mlx5e: IPoIB, Add PKEY child interface nic profile") Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
[ Upstream commit 5c857225 ] When native XDP redirect into a veth device, the frame arrives in the xdp_frame structure. It is then processed in veth_xdp_rcv_one(), which can run a new XDP bpf_prog on the packet. Doing so requires converting xdp_frame to xdp_buff, but the tricky part is that xdp_frame memory area is located in the top (data_hard_start) memory area that xdp_buff will point into. The current code tried to protect the xdp_frame area, by assigning xdp_buff.data_hard_start past this memory. This results in 32 bytes less headroom to expand into via BPF-helper bpf_xdp_adjust_head(). This protect step is actually not needed, because BPF-helper bpf_xdp_adjust_head() already reserve this area, and don't allow BPF-prog to expand into it. Thus, it is safe to point data_hard_start directly at xdp_frame memory area. Fixes: 9fc8d518 ("veth: Handle xdp_frames in xdp napi ring") Reported-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Toshiaki Makita <toshiaki.makita1@gmail.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/158945338331.97035.5923525383710752178.stgit@firesoulSigned-off-by:
-
Guoqing Jiang authored
[ Upstream commit f6766ff6 ] We need to check mddev->del_work before flush workqueu since the purpose of flush is to ensure the previous md is disappeared. Otherwise the similar deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the bdev->bd_mutex before flush workqueue. kernel: [ 154.522645] ====================================================== kernel: [ 154.522647] WARNING: possible circular locking dependency detected kernel: [ 154.522650] 5.6.0-rc7-lp151.27-default #25 Tainted: G O kernel: [ 154.522651] ------------------------------------------------------ kernel: [ 154.522653] mdadm/2482 is trying to acquire lock: kernel: [ 154.522655] ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0 kernel: [ 154.522673] kernel: [ 154.522673] but task is already holding lock: kernel: [ 154.522675] ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522691] kernel: [ 154.522691] which lock already depends on the new lock. kernel: [ 154.522691] kernel: [ 154.522694] kernel: [ 154.522694] the existing dependency chain (in reverse order) is: kernel: [ 154.522696] kernel: [ 154.522696] -> #4 (&bdev->bd_mutex){+.+.}: kernel: [ 154.522704] __mutex_lock+0x87/0x950 kernel: [ 154.522706] __blkdev_get+0x79/0x590 kernel: [ 154.522708] blkdev_get+0x65/0x140 kernel: [ 154.522709] blkdev_get_by_dev+0x2f/0x40 kernel: [ 154.522716] lock_rdev+0x3d/0x90 [md_mod] kernel: [ 154.522719] md_import_device+0xd6/0x1b0 [md_mod] kernel: [ 154.522723] new_dev_store+0x15e/0x210 [md_mod] kernel: [ 154.522728] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522732] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522735] vfs_write+0xad/0x1a0 kernel: [ 154.522737] ksys_write+0xa4/0xe0 kernel: [ 154.522745] do_syscall_64+0x64/0x2b0 kernel: [ 154.522748] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522749] kernel: [ 154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}: kernel: [ 154.522752] __mutex_lock+0x87/0x950 kernel: [ 154.522756] new_dev_store+0xc9/0x210 [md_mod] kernel: [ 154.522759] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522761] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522763] vfs_write+0xad/0x1a0 kernel: [ 154.522765] ksys_write+0xa4/0xe0 kernel: [ 154.522767] do_syscall_64+0x64/0x2b0 kernel: [ 154.522769] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522770] kernel: [ 154.522770] -> #2 (kn->count#253){++++}: kernel: [ 154.522775] __kernfs_remove+0x253/0x2c0 kernel: [ 154.522778] kernfs_remove+0x1f/0x30 kernel: [ 154.522780] kobject_del+0x28/0x60 kernel: [ 154.522783] mddev_delayed_delete+0x24/0x30 [md_mod] kernel: [ 154.522786] process_one_work+0x2a7/0x5f0 kernel: [ 154.522788] worker_thread+0x2d/0x3d0 kernel: [ 154.522793] kthread+0x117/0x130 kernel: [ 154.522795] ret_from_fork+0x3a/0x50 kernel: [ 154.522796] kernel: [ 154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}: kernel: [ 154.522800] process_one_work+0x27e/0x5f0 kernel: [ 154.522802] worker_thread+0x2d/0x3d0 kernel: [ 154.522804] kthread+0x117/0x130 kernel: [ 154.522806] ret_from_fork+0x3a/0x50 kernel: [ 154.522807] kernel: [ 154.522807] -> #0 ((wq_completion)md_misc){+.+.}: kernel: [ 154.522813] __lock_acquire+0x1392/0x1690 kernel: [ 154.522816] lock_acquire+0xb4/0x1a0 kernel: [ 154.522818] flush_workqueue+0xab/0x4b0 kernel: [ 154.522821] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522823] __blkdev_get+0xea/0x590 kernel: [ 154.522825] blkdev_get+0x65/0x140 kernel: [ 154.522828] do_dentry_open+0x1d1/0x380 kernel: [ 154.522831] path_openat+0x567/0xcc0 kernel: [ 154.522834] do_filp_open+0x9b/0x110 kernel: [ 154.522836] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522838] do_sys_open+0x57/0x80 kernel: [ 154.522840] do_syscall_64+0x64/0x2b0 kernel: [ 154.522842] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522844] kernel: [ 154.522844] other info that might help us debug this: kernel: [ 154.522844] kernel: [ 154.522846] Chain exists of: kernel: [ 154.522846] (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex kernel: [ 154.522846] kernel: [ 154.522850] Possible unsafe locking scenario: kernel: [ 154.522850] kernel: [ 154.522852] CPU0 CPU1 kernel: [ 154.522853] ---- ---- kernel: [ 154.522854] lock(&bdev->bd_mutex); kernel: [ 154.522856] lock(&mddev->reconfig_mutex); kernel: [ 154.522858] lock(&bdev->bd_mutex); kernel: [ 154.522860] lock((wq_completion)md_misc); kernel: [ 154.522861] kernel: [ 154.522861] *** DEADLOCK *** kernel: [ 154.522861] kernel: [ 154.522864] 1 lock held by mdadm/2482: kernel: [ 154.522865] #0: ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522868] kernel: [ 154.522868] stack backtrace: kernel: [ 154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G O 5.6.0-rc7-lp151.27-default #25 kernel: [ 154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 kernel: [ 154.522878] Call Trace: kernel: [ 154.522881] dump_stack+0x8f/0xcb kernel: [ 154.522884] check_noncircular+0x194/0x1b0 kernel: [ 154.522888] ? __lock_acquire+0x1392/0x1690 kernel: [ 154.522890] __lock_acquire+0x1392/0x1690 kernel: [ 154.522893] lock_acquire+0xb4/0x1a0 kernel: [ 154.522895] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522898] flush_workqueue+0xab/0x4b0 kernel: [ 154.522900] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522905] ? md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522908] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522910] __blkdev_get+0xea/0x590 kernel: [ 154.522912] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522914] blkdev_get+0x65/0x140 kernel: [ 154.522916] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522918] do_dentry_open+0x1d1/0x380 kernel: [ 154.522921] path_openat+0x567/0xcc0 kernel: [ 154.522923] ? __lock_acquire+0x380/0x1690 kernel: [ 154.522926] do_filp_open+0x9b/0x110 kernel: [ 154.522929] ? __alloc_fd+0xe5/0x1f0 kernel: [ 154.522935] ? kmem_cache_alloc+0x28c/0x630 kernel: [ 154.522939] ? do_sys_openat2+0x201/0x2a0 kernel: [ 154.522941] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522944] do_sys_open+0x57/0x80 kernel: [ 154.522946] do_syscall_64+0x64/0x2b0 kernel: [ 154.522948] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522951] RIP: 0033:0x7f98d279d9ae And md_alloc also flushed the same workqueue, but the thing is different here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and the flush is necessary to avoid race condition, so leave it as it is. Signed-off-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Ryder Lee authored
[ Upstream commit 7c4f744d ] Enlarge slot to support 11ax 256 BA (256 MPDUs in an AMPDU) Signed-off-by:
Chih-Min Chen <chih-min.chen@mediatek.com> Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Bhupesh Sharma authored
[ Upstream commit 73e03097 ] Normally kdump kernel(s) run under severe memory constraint with the basic idea being to save the crashdump vmcore reliably when the primary kernel panics/hangs. Currently the qed* ethernet driver ends up consuming a lot of memory in the kdump kernel, leading to kdump kernel panic when one tries to save the vmcore via ssh/nfs (thus utilizing the services of the underlying qed* network interfaces). An example OOM message log seen in the kdump kernel can be seen here [1], with crashkernel size reservation of 512M. Using tools like memstrack (see [2]), we can track the modules taking up the bulk of memory in the kdump kernel and organize the memory usage output as per 'highest allocator first'. An example log for the OOM case indicates that the qed* modules end up allocating approximately 216M memory, which is a large part of the total crashkernel size: dracut-pre-pivot[676]: ======== Report format module_summary: ======== dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages) dracut-pre-pivot[676]: Module qede using 65.3MB (1045 pages), peak allocation 65.3MB (1045 pages) This patch reduces the default RX and TX ring count from 1024 to 64 when running inside kdump kernel, which leads to a significant memory saving. An example log with the patch applied shows the reduced memory allocation in the kdump kernel: dracut-pre-pivot[674]: ======== Report format module_summary: ======== dracut-pre-pivot[674]: Module qed using 141.8MB (2268 pages), peak allocation 141.8MB (2268 pages) <..snip..> [dracut-pre-pivot[674]: Module qede using 4.8MB (76 pages), peak allocation 4.9MB (78 pages) Tested crashdump vmcore save via ssh/nfs protocol using underlying qed* network interface after applying this patch. [1] OOM log: ------------ kworker/0:6: page allocation failure: order:6, mode:0x60c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null) kworker/0:6 cpuset=/ mems_allowed=0 CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 4.18.0-109.el8.aarch64 #1 Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL025 01/18/2019 Workqueue: events work_for_cpu_fn Call trace: dump_backtrace+0x0/0x188 show_stack+0x24/0x30 dump_stack+0x90/0xb4 warn_alloc+0xf4/0x178 __alloc_pages_nodemask+0xcac/0xd58 alloc_pages_current+0x8c/0xf8 kmalloc_order_trace+0x38/0x108 qed_iov_alloc+0x40/0x248 [qed] qed_resc_alloc+0x224/0x518 [qed] qed_slowpath_start+0x254/0x928 [qed] __qede_probe+0xf8/0x5e0 [qede] qede_probe+0x68/0xd8 [qede] local_pci_probe+0x44/0xa8 work_for_cpu_fn+0x20/0x30 process_one_work+0x1ac/0x3e8 worker_thread+0x44/0x448 kthread+0x130/0x138 ret_from_fork+0x10/0x18 Cannot start slowpath qede: probe of 0000:05:00.1 failed with error -12 [2]. Memstrack tool: https://github.com/ryncsn/memstrack Cc: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Ariel Elior <aelior@marvell.com> Cc: GR-everest-linux-l2@marvell.com Cc: Manish Chopra <manishc@marvell.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit a86308fc ] In case of error, 'qcom_wcnss_open_channel()' must be undone by a call to 'rpmsg_destroy_ept()', as already done in the remove function. Fixes: 5052de8d ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Rakesh Pillai authored
[ Upstream commit c730c477 ] Currently when the sending of any management pkt via wmi command fails, the packet is being unmapped freed in the error handling. But the idr entry added, which is used to track these packet is not getting removed. Hence, during unload, in wmi cleanup, all the entries in IDR are removed and the corresponding buffer is attempted to be freed. This can cause a situation where one packet is attempted to be freed twice. Fix this error by rmeoving the msdu from the idr list when the sending of a management packet over wmi fails. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Fixes: 1807da49 ("ath10k: wmi: add management tx by reference support over wmi") Signed-off-by:
Rakesh Pillai <pillair@codeaurora.org> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit b9a5c3d4 ] Add a helper to check if we can use Identify CNS values > 1, and refine the Qemu quirk to not apply to reported versions larger than 1.1, as the Qemu implementation had been fixed by then. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Hans de Goede authored
platform/x86: intel-vbtn: Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types [ Upstream commit 1fac39fd ] Commit de9647ef ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's") added a DMI chassis-type check to avoid accidentally reporting SW_TABLET_MODE = 1 to userspace on laptops. Some devices with a detachable keyboard and using the intel-vbnt (INT33D6) interface to report if they are in tablet mode (keyboard detached) or not, report 32 / "Detachable" as chassis-type, e.g. the HP Pavilion X2 series. Other devices with a detachable keyboard and using the intel-vbnt (INT33D6) interface to report SW_TABLET_MODE, report 8 / "Portable" as chassis-type. The Dell Venue 11 Pro 7130 is an example of this. Extend the DMI chassis-type check to also accept Portables and Detachables so that the intel-vbtn driver will report SW_TABLET_MODE on these devices. Note the chassis-type check was originally added to avoid a false-positive tablet-mode report on the Dell XPS 9360 laptop. To the best of my knowledge that laptop is using a chassis-type of 9 / "Laptop", so after this commit we still ignore the tablet-switch for that chassis-type. Fixes: de9647ef ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Mario Limonciello <Mario.limonciello@dell.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 990fbb48 ] Commit de9647ef ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's") added a DMI chassis-type check to avoid accidentally reporting SW_TABLET_MODE = 1 to userspace on laptops (specifically on the Dell XPS 9360), to avoid e.g. userspace ignoring touchpad events because userspace thought the device was in tablet-mode. But if we are not getting the initial status of the switch because the device does not have a tablet mode, then we really should not advertise the presence of a tablet-mode switch to userspace at all, as userspace may use the mere presence of this switch for certain heuristics. Fixes: de9647ef ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's") Signed-off-by:
-
Hans de Goede authored
[ Upstream commit f6ba5249 ] Split the sparse keymap into 2 separate keymaps, a buttons and a switches keymap and combine the 2 to a single map again in intel_vbtn_input_setup(). This is a preparation patch for not telling userspace that we have switches when we do not have them (and for doing the same for the buttons). Fixes: de9647ef ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's") Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 18937875 ] Use acpi_evaluate_integer() instead of open-coding it. This is a preparation patch for adding a intel_vbtn_has_switches() helper function. Fixes: de9647ef ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's") Signed-off-by:
-
Brian Foster authored
[ Upstream commit 629dcb38 ] The pre-flush dquot verification in xfs_qm_dqflush() duplicates the read verifier by checking the dquot in the on-disk buffer. Instead, verify the in-core variant before it is flushed to the buffer. Fixes: 7224fa48 ("xfs: add full xfs_dqblk verifier") Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Allison Collins <allison.henderson@oracle.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Brian Foster authored
[ Upstream commit b6983e80 ] The buffer write failure flag is intended to control the internal write retry that XFS has historically implemented to help mitigate the severity of transient I/O errors. The flag is set when a buffer is resubmitted from the I/O completion path due to a previous failure. It is checked on subsequent I/O completions to skip the internal retry and fall through to the higher level configurable error handling mechanism. The flag is cleared in the synchronous and delwri submission paths and also checked in various places to log write failure messages. There are a couple minor problems with the current usage of this flag. One is that we issue an internal retry after every submission from xfsaild due to how delwri submission clears the flag. This results in double the expected or configured number of write attempts when under sustained failures. Another more subtle issue is that the flag is never cleared on successful I/O completion. This can cause xfs_wait_buftarg() to suggest that dirty buffers are being thrown away due to the existence of the flag, when the reality is that the flag might still be set because the write succeeded on the retry. Clear the write failure flag on successful I/O completion to address both of these problems. This means that the internal retry attempt occurs once since the last time a buffer write failed and that various other contexts only see the flag set when the immediately previous write attempt has failed. Signed-off-by:
-
Daniel Thompson authored
[ Upstream commit 3fec4aec ] Currently there is a small window where a badly timed migration could cause in_dbg_master() to spuriously return true. Specifically if we migrate to a new core after reading the processor id and the previous core takes a breakpoint then we will evaluate true if we read kgdb_active before we get the IPI to bring us to halt. Fix this by checking irqs_disabled() first. Interrupts are always disabled when we are executing the kgdb trap so this is an acceptable prerequisite. This also allows us to replace raw_smp_processor_id() with smp_processor_id() since the short circuit logic will prevent warnings from PREEMPT_DEBUG. Fixes: dcc78711 ("kgdb: core changes to support kdb") Suggested-by:
Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200506164223.2875760-1-daniel.thompson@linaro.orgReviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Serge Semin authored
[ Upstream commit 8a0efb8b ] Commit 3885c2b4 ("MIPS: CM: Add support for reporting CM cache errors") adds cm2_causes[] array with map of error type ID and pointers to the short description string. There is a mistake in the table, since according to MIPS32 manual CM2_ERROR_TYPE = {17,18} correspond to INTVN_WR_ERR and INTVN_RD_ERR, while the table claims they have {0x17,0x18} codes. This is obviously hex-dec copy-paste bug. Moreover codes {0x18 - 0x1a} indicate L2 ECC errors. Fixes: 3885c2b4 ("MIPS: CM: Add support for reporting CM cache errors") Signed-off-by:
-
Jiaxun Yang authored
[ Upstream commit ff487d41 ] LLD failed to link vmlinux with 64bit load address for 32bit ELF while bfd will strip 64bit address into 32bit silently. To fix LLD build, we should truncate load address provided by platform into 32bit for 32bit kernel. Signed-off-by:
Fangrui Song <maskray@google.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Devulapally Shiva Krishna authored
[ Upstream commit 10b0c75d ] The ccm(aes) test fails when req->assoclen > ~240bytes. The problem is the value assigned to auth_offset is wrong. As auth_offset is unsigned char, it can take max value as 255. So fix it by making it unsigned int. Signed-off-by:
Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by:
Devulapally Shiva Krishna <shiva@chelsio.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 8bc3b5e4 ] Make sure we release resources properly if we cannot clean out the COW extents in preparation for an extent swap. Fixes: 96987eea ("xfs: cancel COW blocks before swapext") Signed-off-by:
-
Jeremy Kerr authored
[ Upstream commit 88413a6b ] Currently, we may perform a copy_to_user (through simple_read_from_buffer()) while holding a context's register_lock, while accessing the context save area. This change uses a temporary buffer for the context save area data, which we then pass to simple_read_from_buffer. Includes changes from Christoph Hellwig <hch@lst.de>. Fixes: bf1ab978 ("[POWERPC] coredump: Add SPU elf notes to coredump.") Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> [hch: renamed to function to avoid ___-prefixes] Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Yunjian Wang authored
[ Upstream commit 09f6c44a ] The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. And emac_start_xmit() can leak one skb if 'channel' == 3. Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 3b5af317 ] The log_addrs->log_addr_type[i] value is a u8 which is controlled by the user and comes from the ioctl. If it's over 31 then that results in undefined behavior (shift wrapping) and that leads to a Smatch static checker warning. We already cap the value later so we can silence the warning just by re-ordering the existing checks. I think the UBSan checker will also catch this bug at runtime and generate a warning. But otherwise the bug is harmless. Fixes: 9881fe0c ("[media] cec: add HDMI CEC framework (adapter)") Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 88ec7cb2 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: b7370112 ("lpc32xx: Added ethernet driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Shaokun Zhang authored
[ Upstream commit 88562f06 ] Fix up one typo: wr_dr_64b -> wr_ddr_64b. Fixes: 2bab3cf9 ("perf: hisi: Add support for HiSilicon SoC HHA PMU driver") Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/1587643530-34357-1-git-send-email-zhangshaokun@hisilicon.comSigned-off-by:
-
Peter Zijlstra authored
[ Upstream commit bf2c59fc ] In the CPU-offline process, it calls mmdrop() after idle entry and the subsequent call to cpuhp_report_idle_dead(). Once execution passes the call to rcu_report_dead(), RCU is ignoring the CPU, which results in lockdep complaining when mmdrop() uses RCU from either memcg or debugobjects below. Fix it by cleaning up the active_mm state from BP instead. Every arch which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit() from AP. The only exception is parisc because it switches them to &init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()), but the patch will still work there because it calls mmgrab(&init_mm) in smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu(). WARNING: suspicious RCU usage ----------------------------- kernel/workqueue.c:710 RCU or wq_pool_mutex should be held! other info that might help us debug this: RCU used illegally from offline CPU! Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 get_work_pool+0x110/0x150 __queue_work+0x1bc/0xca0 queue_work_on+0x114/0x120 css_release+0x9c/0xc0 percpu_ref_put_many+0x204/0x230 free_pcp_prepare+0x264/0x570 free_unref_page+0x38/0xf0 __mmdrop+0x21c/0x2c0 idle_task_exit+0x170/0x1b0 pnv_smp_cpu_kill_self+0x38/0x2e0 cpu_die+0x48/0x64 arch_cpu_idle_dead+0x30/0x50 do_idle+0x2f4/0x470 cpu_startup_entry+0x38/0x40 start_secondary+0x7a8/0xa80 start_secondary_resume+0x10/0x14 Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Jann Horn authored
[ Upstream commit 586b58ca ] With CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_CGROUPS=y, kernel oopses in non-preemptible context look untidy; after the main oops, the kernel prints a "sleeping function called from invalid context" report because exit_signals() -> cgroup_threadgroup_change_begin() -> percpu_down_read() can sleep, and that happens before the preempt_count_set(PREEMPT_ENABLED) fixup. It looks like the same thing applies to profile_task_exit() and kcov_task_exit(). Fix it by moving the preemption fixup up and the calls to profile_task_exit() and kcov_task_exit() down. Fixes: 1dc0fffc ("sched/core: Robustify preemption leak checks") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 18f1ca46 ] When building 64r6_defconfig with CONFIG_MIPS32_O32 disabled and CONFIG_CRYPTO_RSA enabled: lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb); ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/mpi/longlong.h:664:22: note: expanded from macro 'umul_ppmm' : "=d" ((UDItype)(w0)) ~~~~~~~~~~^~~ lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb); ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/mpi/longlong.h:668:22: note: expanded from macro 'umul_ppmm' : "=d" ((UDItype)(w1)) ~~~~~~~~~~^~~ 2 errors generated. This special case for umul_ppmm for MIPS64r6 was added in commit bbc25bee ("lib/mpi: Fix umul_ppmm() for MIPS64r6"), due to GCC being inefficient and emitting a __multi3 intrinsic. There is no such issue with clang; with this patch applied, I can build this configuration without any problems and there are no link errors like mentioned in the commit above (which I can still reproduce with GCC 9.3.0 when that commit is reverted). Only use this definition when GCC is being used. This really should have been caught by commit b0c091ae ("lib/mpi: Eliminate unused umul_ppmm definitions for MIPS") when I was messing around in this area but I was not testing 64-bit MIPS at the time. Link: https://github.com/ClangBuiltLinux/linux/issues/885Reported-by:
Dmitry Golovin <dima@golovin.in> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 72f96347 ] This commit explicitly calls the bcmgenet_set_rx_mode() function when the network interface is started. This function is normally called by ndo_set_rx_mode when the flags are changed, but apparently not when the driver is suspended and resumed. This change ensures that address filtering or promiscuous mode are properly restored by the driver after the MAC may have been reset. Fixes: b6e978e5 ("net: bcmgenet: add suspend/resume callbacks") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Andrii Nakryiko authored
[ Upstream commit 9f56bb53 ] getline() allocates string, which has to be freed. Fixes: 81f77fd0 ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID") Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
-
