- 11 Dec, 2018 1 commit
-
-
Thierry Reding authored
As part of commit cfea88a4 ("drm/nouveau: Start using new drm_dev initialization helpers"), the initialization of the Nouveau DRM device was reworked and along the way the platform driver initialization was left incomplete. Add a call to nouveau_drm_device_init() to make sure all of the structures are properly initialized. Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Tested-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
- 10 Oct, 2018 16 commits
-
-
Gustavo A. R. Silva authored
In case memory resources for *bl_desc* were allocated, release them before return. Addresses-Coverity-ID: 1472021 ("Resource leak") Fixes: 0d466901 ("drm/nouveau/secboot/acr: Remove VLA usage") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Ilia Mirkin authored
Scrambling is required for supporting any mode over 340MHz. If it's not supported, reject any modes that would require it. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Ilia Mirkin authored
When SCDC is supported, make sure that we configure the GPU and monitor to the same parameters. Signed-off-by:
-
Ilia Mirkin authored
The register programmed by the clock method needs to contain a different setting for the link speed as well as special divider settings. Signed-off-by:
-
Ilia Mirkin authored
Signed-off-by:
-
Ilia Mirkin authored
High pixel clocks are required to use a 40 TMDS divider instead of 10, and even low ones may optionally use scrambling depending on device support. Signed-off-by:
-
Lyude Paul authored
Per the documentation in drm_get_pci_dev(), this function is deprecated and shouldn't be used anymore. As it turns out, we're going to need to stop using drm_get_pci_dev() anyway in order to allow us to turn off the card before full system shutdowns, otherwise we'll hit race conditions with userspace while trying to tear down the card on shutdown. So, start using drm_dev_get() and drm_dev_put(), and just turn our load/unload callbacks into open coded init/fini() functions. Signed-off-by:
-
Lyude Paul authored
We forget to free drm in all instances of failure, and additionally also forget to destroy the master client if the other client fails initialization. Signed-off-by:
-
Lyude Paul authored
There's literally no difference between any of the backlight init functions besides the backlight properties they set and the backlight callbacks that they set, so move all of the duplicated backlight init code out of there and into nouveau_backlight_init(). This gets rid of a lot of copy pasta! Changes since v1: - Some of the pre-refactor callbacks were storing nv_encoder in callback data for the backlight devices that they registered, as opposed to nouveau_drm. This got missed and caused some bugs that didn't originally appear on my setup (NULL kernel derefs) for some reason. So, fix this by finding the nouveau_encoder in nouveau_backlight_init(), and using that as the callback data for all gens instead even if they don't care about the encoder. Signed-off-by:
-
Lyude Paul authored
Still no functional changes. Signed-off-by:
Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
Lyude Paul authored
More consistent with the rest of the codebase, no functional changes here. Signed-off-by:
-
Lyude Paul authored
Currently module unloading is broken in nouveau due to a rather annoying race condition resulting from nouveau_backlight.c having gone a bit stale over time: [ 1960.791143] ================================================================== [ 1960.791394] BUG: KASAN: use-after-free in nouveau_backlight_exit+0x112/0x150 [nouveau] [ 1960.791460] Read of size 4 at addr ffff88075accf350 by task zsh/11185 [ 1960.791521] [ 1960.791545] CPU: 7 PID: 11185 Comm: zsh Kdump: loaded Tainted: G O 4.18.0Lyude-Test+ #4 [ 1960.791580] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET79W (1.52 ) 07/13/2018 [ 1960.791628] Call Trace: [ 1960.791680] dump_stack+0xa4/0xfd [ 1960.791721] print_address_description+0x71/0x239 [ 1960.791833] ? nouveau_backlight_exit+0x112/0x150 [nouveau] [ 1960.791877] kasan_report.cold.6+0x242/0x2fe [ 1960.791919] __asan_report_load4_noabort+0x19/0x20 [ 1960.792012] nouveau_backlight_exit+0x112/0x150 [nouveau] [ 1960.792081] nouveau_display_destroy+0x76/0x150 [nouveau] [ 1960.792150] nouveau_drm_device_fini+0xb7/0x190 [nouveau] [ 1960.792265] nouveau_drm_device_remove+0x14b/0x1d0 [nouveau] [ 1960.792347] ? nouveau_cli_work_queue+0x2e0/0x2e0 [nouveau] [ 1960.792378] ? trace_hardirqs_on_caller+0x38b/0x570 [ 1960.792406] ? trace_hardirqs_on+0xd/0x10 [ 1960.792472] nouveau_drm_remove+0x37/0x50 [nouveau] [ 1960.792502] pci_device_remove+0x112/0x2d0 [ 1960.792530] ? pcibios_free_irq+0x10/0x10 [ 1960.792558] ? kasan_check_write+0x14/0x20 [ 1960.792587] device_release_driver_internal+0x35c/0x650 [ 1960.792617] device_release_driver+0x12/0x20 [ 1960.792643] pci_stop_bus_device+0x172/0x1e0 [ 1960.792671] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [ 1960.792715] remove_store+0xcb/0xe0 [ 1960.792753] ? sriov_numvfs_store+0x2e0/0x2e0 [ 1960.792779] ? __lock_is_held+0xb5/0x140 [ 1960.792808] ? component_add+0x530/0x530 [ 1960.792834] dev_attr_store+0x3f/0x70 [ 1960.792859] ? sysfs_file_ops+0x11d/0x170 [ 1960.792885] sysfs_kf_write+0x104/0x150 [ 1960.792915] ? sysfs_file_ops+0x170/0x170 [ 1960.792940] kernfs_fop_write+0x24f/0x400 [ 1960.792978] ? __lock_acquire+0x6ea/0x47f0 [ 1960.793021] __vfs_write+0xeb/0x760 [ 1960.793048] ? kernel_read+0x130/0x130 [ 1960.793076] ? __lock_is_held+0xb5/0x140 [ 1960.793107] ? rcu_read_lock_sched_held+0xdd/0x110 [ 1960.793135] ? rcu_sync_lockdep_assert+0x78/0xb0 [ 1960.793162] ? __sb_start_write+0x183/0x220 [ 1960.793189] vfs_write+0x14d/0x4a0 [ 1960.793229] ksys_write+0xd2/0x1b0 [ 1960.793255] ? __ia32_sys_read+0xb0/0xb0 [ 1960.793298] ? fput+0x1d/0x120 [ 1960.793324] ? filp_close+0xf3/0x130 [ 1960.793349] ? entry_SYSCALL_64_after_hwframe+0x59/0xbe [ 1960.793380] __x64_sys_write+0x73/0xb0 [ 1960.793407] do_syscall_64+0xaa/0x400 [ 1960.793433] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1960.793460] RIP: 0033:0x7f59df433164 [ 1960.793486] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 81 38 2d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 1960.793541] RSP: 002b:00007ffd70ee2fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 1960.793576] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f59df433164 [ 1960.793620] RDX: 0000000000000002 RSI: 00005578088640c0 RDI: 0000000000000001 [ 1960.793665] RBP: 00005578088640c0 R08: 00007f59df7038c0 R09: 00007f59e0995b80 [ 1960.793696] R10: 000000000000000a R11: 0000000000000246 R12: 00007f59df702760 [ 1960.793730] R13: 0000000000000002 R14: 00007f59df6fd760 R15: 0000000000000002 [ 1960.793768] [ 1960.793790] Allocated by task 11167: [ 1960.793816] save_stack+0x43/0xd0 [ 1960.793841] kasan_kmalloc+0xc4/0xe0 [ 1960.793880] kasan_slab_alloc+0x11/0x20 [ 1960.793905] kmem_cache_alloc+0xd7/0x270 [ 1960.793944] getname_flags+0xbd/0x520 [ 1960.793969] user_path_at_empty+0x23/0x50 [ 1960.793994] do_faccessat+0x1fc/0x5d0 [ 1960.794018] __x64_sys_access+0x59/0x80 [ 1960.794043] do_syscall_64+0xaa/0x400 [ 1960.794067] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1960.794093] [ 1960.794127] Freed by task 11167: [ 1960.794152] save_stack+0x43/0xd0 [ 1960.794190] __kasan_slab_free+0x139/0x190 [ 1960.794215] kasan_slab_free+0xe/0x10 [ 1960.794239] kmem_cache_free+0xcb/0x2c0 [ 1960.794264] putname+0xad/0xe0 [ 1960.794287] filename_lookup.part.59+0x1f1/0x360 [ 1960.794313] user_path_at_empty+0x3e/0x50 [ 1960.794338] do_faccessat+0x1fc/0x5d0 [ 1960.794362] __x64_sys_access+0x59/0x80 [ 1960.794393] do_syscall_64+0xaa/0x400 [ 1960.794421] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1960.794461] [ 1960.794483] The buggy address belongs to the object at ffff88075acceac0 [ 1960.794483] which belongs to the cache names_cache of size 4096 [ 1960.794540] The buggy address is located 2192 bytes inside of [ 1960.794540] 4096-byte region [ffff88075acceac0, ffff88075accfac0) [ 1960.794581] The buggy address belongs to the page: [ 1960.794609] page:ffffea001d6b3200 count:1 mapcount:0 mapping:ffff880778e4b1c0 index:0x0 compound_mapcount: 0 [ 1960.794651] flags: 0x8000000000008100(slab|head) [ 1960.794679] raw: 8000000000008100 ffffea001d39e808 ffffea001d39ea08 ffff880778e4b1c0 [ 1960.794739] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 1960.794785] page dumped because: kasan: bad access detected [ 1960.794813] [ 1960.794834] Memory state around the buggy address: [ 1960.794861] ffff88075accf200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1960.794894] ffff88075accf280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1960.794925] >ffff88075accf300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1960.794956] ^ [ 1960.794985] ffff88075accf380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1960.795017] ffff88075accf400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1960.795061] ================================================================== [ 1960.795106] Disabling lock debugging due to kernel taint [ 1960.795131] ------------[ cut here ]------------ [ 1960.795148] ida_remove called for id=1802201963 which is not allocated. [ 1960.795193] WARNING: CPU: 7 PID: 11185 at lib/idr.c:521 ida_remove+0x184/0x210 [ 1960.795213] Modules linked in: nouveau(O) mxm_wmi ttm i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm joydev vfat fat intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul iTCO_wdt psmouse wmi_bmof mei_me tpm_tis mei tpm_tis_core tpm i2c_i801 thinkpad_acpi pcc_cpufreq crc32c_intel serio_raw xhci_pci xhci_hcd wmi video i2c_dev i2c_core [ 1960.795305] CPU: 7 PID: 11185 Comm: zsh Kdump: loaded Tainted: G B O 4.18.0Lyude-Test+ #4 [ 1960.795330] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET79W (1.52 ) 07/13/2018 [ 1960.795352] RIP: 0010:ida_remove+0x184/0x210 [ 1960.795370] Code: 4c 89 f7 e8 ae c8 00 00 eb 22 41 83 c4 02 4c 89 e8 41 83 fc 3f 0f 86 64 ff ff ff 44 89 fe 48 c7 c7 20 94 1e 83 e8 54 ed 81 fe <0f> 0b 48 b8 00 00 00 00 00 fc ff df 48 01 c3 c7 03 00 00 00 00 c7 [ 1960.795402] RSP: 0018:ffff88074d4df7b8 EFLAGS: 00010082 [ 1960.795421] RAX: 0000000000000000 RBX: 1ffff100e9a9befa RCX: ffffffff81479975 [ 1960.795440] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88077c1de690 [ 1960.795460] RBP: ffff88074d4df878 R08: ffffed00ef83bcd3 R09: ffffed00ef83bcd2 [ 1960.795479] R10: ffffed00ef83bcd2 R11: ffff88077c1de697 R12: 000000000000036b [ 1960.795498] R13: 0000000000000202 R14: ffffffffa0aa7fa0 R15: 000000006b6b6b6b [ 1960.795518] FS: 00007f59e0995b80(0000) GS:ffff88077c1c0000(0000) knlGS:0000000000000000 [ 1960.795553] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1960.795571] CR2: 00007f59e09a2010 CR3: 00000004a1a70005 CR4: 00000000003606e0 [ 1960.795596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1960.795629] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1960.795649] Call Trace: [ 1960.795667] ? ida_destroy+0x1d0/0x1d0 [ 1960.795686] ? kasan_check_write+0x14/0x20 [ 1960.795704] ? do_raw_spin_lock+0xc2/0x1c0 [ 1960.795724] ida_simple_remove+0x26/0x40 [ 1960.795794] nouveau_backlight_exit+0x9d/0x150 [nouveau] [ 1960.795867] nouveau_display_destroy+0x76/0x150 [nouveau] [ 1960.795930] nouveau_drm_device_fini+0xb7/0x190 [nouveau] [ 1960.795989] nouveau_drm_device_remove+0x14b/0x1d0 [nouveau] [ 1960.796047] ? nouveau_cli_work_queue+0x2e0/0x2e0 [nouveau] [ 1960.796067] ? trace_hardirqs_on_caller+0x38b/0x570 [ 1960.796089] ? trace_hardirqs_on+0xd/0x10 [ 1960.796146] nouveau_drm_remove+0x37/0x50 [nouveau] [ 1960.796167] pci_device_remove+0x112/0x2d0 [ 1960.796186] ? pcibios_free_irq+0x10/0x10 [ 1960.796218] ? kasan_check_write+0x14/0x20 [ 1960.796237] device_release_driver_internal+0x35c/0x650 [ 1960.796257] device_release_driver+0x12/0x20 [ 1960.796289] pci_stop_bus_device+0x172/0x1e0 [ 1960.796308] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [ 1960.796328] remove_store+0xcb/0xe0 [ 1960.796345] ? sriov_numvfs_store+0x2e0/0x2e0 [ 1960.796364] ? __lock_is_held+0xb5/0x140 [ 1960.796383] ? component_add+0x530/0x530 [ 1960.796401] dev_attr_store+0x3f/0x70 [ 1960.796419] ? sysfs_file_ops+0x11d/0x170 [ 1960.796436] sysfs_kf_write+0x104/0x150 [ 1960.796454] ? sysfs_file_ops+0x170/0x170 [ 1960.796471] kernfs_fop_write+0x24f/0x400 [ 1960.796488] ? __lock_acquire+0x6ea/0x47f0 [ 1960.796520] __vfs_write+0xeb/0x760 [ 1960.796538] ? kernel_read+0x130/0x130 [ 1960.796556] ? __lock_is_held+0xb5/0x140 [ 1960.796590] ? rcu_read_lock_sched_held+0xdd/0x110 [ 1960.796608] ? rcu_sync_lockdep_assert+0x78/0xb0 [ 1960.796626] ? __sb_start_write+0x183/0x220 [ 1960.796648] vfs_write+0x14d/0x4a0 [ 1960.796666] ksys_write+0xd2/0x1b0 [ 1960.796684] ? __ia32_sys_read+0xb0/0xb0 [ 1960.796701] ? fput+0x1d/0x120 [ 1960.796732] ? filp_close+0xf3/0x130 [ 1960.796749] ? entry_SYSCALL_64_after_hwframe+0x59/0xbe [ 1960.796768] __x64_sys_write+0x73/0xb0 [ 1960.796800] do_syscall_64+0xaa/0x400 [ 1960.796818] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1960.796836] RIP: 0033:0x7f59df433164 [ 1960.796854] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 81 38 2d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 1960.796884] RSP: 002b:00007ffd70ee2fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 1960.796906] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f59df433164 [ 1960.796926] RDX: 0000000000000002 RSI: 00005578088640c0 RDI: 0000000000000001 [ 1960.796946] RBP: 00005578088640c0 R08: 00007f59df7038c0 R09: 00007f59e0995b80 [ 1960.796966] R10: 000000000000000a R11: 0000000000000246 R12: 00007f59df702760 [ 1960.796985] R13: 0000000000000002 R14: 00007f59df6fd760 R15: 0000000000000002 [ 1960.797008] irq event stamp: 509990 [ 1960.797026] hardirqs last enabled at (509989): [<ffffffff8119ff78>] flush_work+0x4b8/0x6d0 [ 1960.797063] hardirqs last disabled at (509990): [<ffffffff8297c395>] _raw_spin_lock_irqsave+0x25/0x60 [ 1960.797085] softirqs last enabled at (509744): [<ffffffff82c005ad>] __do_softirq+0x5ad/0x8c0 [ 1960.797121] softirqs last disabled at (509735): [<ffffffff8115aa15>] irq_exit+0x1a5/0x1e0 [ 1960.797142] ---[ end trace fb1342325f1846b8 ]--- While I haven't actually gone into the details of what's causing this to happen (maybe the kernel removes the backlight device in the device core before we get to it?), it doesn't really matter anyway because the way nouveau handles backlights has long since been deprecated. According to the documentation on the drm_connector->late_register() hook, the ->late_register() hook should be used for adding extra connector-related devices. Vice versa, the ->early_unregister() hook is meant to be used for removing those devices. So: gut nouveau_drm->bl_list and nouveau_drm->backlight, and replace them with per-connector backlight structures. Additionally, move backlight registration/teardown into the ->late_register() and ->early_unregister() hooks so that DRM can give us a chance to remove the backlight before the connector is even removed. This appears to fix the problem once and for all. Changes since v2: - Use NV_INFO_ONCE for printing GMUX information, since otherwise this will end up printing that message for as many times as we have connectors Signed-off-by:
-
Lyude Paul authored
Since we're about to use this in nouveau_backlight.c. Same thing as DRM_WARN_ONCE, DRM_INFO_ONCE, etc... Signed-off-by:
-
Lyude Paul authored
Remember, ida IDs start at 0, not 1! Signed-off-by:
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
Fix 32-bit arm build. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt7s20e4aJmnOFM-uZHfYSsicy0E=ssse1D7LTXX4jnWQ@mail.gmail.com
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
This time mostly further refinement of dpu1+a6xx for sdm845 and beyond.. and hurray for more negative diffstat :-) - Misc cleanups and fixes - GPU preemption optimization - a6xx perf improvements and clock fixes (ie. lets actually not run at minimum clks) - a6xx devfreq/DCVS - Lots of code cleanup across dpu (Bruce, Jeykumar, Sean) - Fixed a few crashes on startup relating to dsi (Sean) - Add cursor support (Sravanthi, Sean) - Properly free mdss irq on destroy (Jordan) - Use correct encoder_type when initializing, fixes crash on boot (Stephen) Signed-off-by:
-
- 09 Oct, 2018 2 commits
-
-
Sean Paul authored
This patch uses the proper do_div() macro to perform u64 division and guards against overflow if the result is too large for the unsigned long return type Fixes: a2c3c0a5 drm/msm/a6xx: Add devfreq support for a6xx Cc: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Sean Paul authored
A small fixup I posted with my v2 patch [1] that was dropped. [1]- https://lists.freedesktop.org/archives/freedreno/2018-October/003647.htmlSigned-off-by:
-
- 08 Oct, 2018 1 commit
-
-
git://linux-arm.org/linux-ldDave Airlie authored
I've realised that the commit 3dae1c09 ("drm/arm/malidp: Implemented the size validation for AFBC framebuffers") got bungled up in the upstreaming process and it was missing an important line from the function that calculates the size of the AFBC framebuffer Signed-off-by:
-
- 07 Oct, 2018 4 commits
-
-
Jordan Crouse authored
The CP performance counter selects were accidentally marked as protected so they couldn't be written from PM4 streams. Remove the protection because user space does have an interest in setting up their own counters. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Sean Paul authored
We are currently leaking a drm_crtc_commit struct for every atomic commit containing plane state. The dpu plane destroy function cleans up the fb reference manually, but fails to release the commit ref. As a result, we just keep allocating drm_crtc_commits without ever freeing them. Fortunately there's a helper function which will clean up all of our mess at once, so use that. Thanks to Doug Anderson for reporting the memory leak (and leaving breadcrumbs from kmemleak!). Reported-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
-
Sean Paul authored
This patch uses the proper do_div() macro to perform u64 division and guards against overflow if the result is too large for the unsigned long return type Fixes: de0a3d09 drm/msm: re-factor devfreq code Cc: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by:
-
Rob Clark authored
Signed-off-by:
-
- 05 Oct, 2018 1 commit
-
-
Liviu Dudau authored
size for AFBC buffers The size of the superblocks being added to the total AFBC buffer size got lost in the upstreaming process. Add it back. Reviewed-by:
Ayan Kumar Halder <ayan.halder@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com>
-
- 04 Oct, 2018 15 commits
-
-
Sharat Masetty authored
Implement routines to estimate GPU busy time and fetching the current frequency for the polling interval. This is required by the devfreq framework which recommends a frequency change if needed. The driver code then tries to set this new frequency on the GPU by sending an Out Of Band(OOB) request to the GMU. Signed-off-by:
Sharat Masetty <smasetty@codeaurora.org> Signed-off-by:
-
Sharat Masetty authored
The devfreq framework requires the drivers to provide busy time estimations. The GPU driver relies on the hardware performance counteres for the busy time estimations, but different hardware revisions have counters which can be sourced from different clocks. So the busy time estimation will be target dependent. Additionally on targets where the clocks are completely controlled by the on chip microcontroller, fetching and setting the current GPU frequency will be different. This patch aims to embrace these differences by re-factoring the devfreq code a bit. Signed-off-by:
-
Sharat Masetty authored
Add a simple function to read 64 registers in the GMU domain Signed-off-by:
-
Sharat Masetty authored
Devfreq turns on and starts recommending power level as soon as it is initialized. The GPU is still not powered on by the time the devfreq init happens and this leads to problems on GPU's where register access is needed to get/set power levels. So we start suspended and only restart devfreq when GPU is powered on. Signed-off-by:
-
git://linux-arm.org/linux-ldDave Airlie authored
misc mali-dp updates. Signed-off-by:
-
https://github.com/jsarha/linuxDave Airlie authored
drm/tilcdc changes for Linux v4.20 suspend/resume update. Signed-off-by:
-
Dave Airlie authored
I have some pulls based on rc6, and I prefer to have an explicit backmerge. Signed-off-by: -
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Add out-bridge support - This patch series enables out-bridge for LVDS bridge device support, and also includes two cleanups and one relevant dt binding update for this. Add Samsung 16x16 tiled format support - This patch series adds Samsung 16x16 tiled format to scaler and gsc drivers. As for this, it adds Samsung specific format to drm_forcc.h header. For the git-pull request with relevant patches, I requested ack-by[1] to relevant maintainers but there was no any response. I'm pretty sure no problem to go to mainline though Exynos tree because the only user of it is Exynos. (airlied: this looked fine to me) [1] https://patchwork.freedesktop.org/patch/243921/ Add configurable plane alpha and pixel blend mode support - This patch series makes mixer driver to be configuragle for pixel blend mode and plane alpha, which also includes one fixup to set all default values correctly after reset. One cleanup - This patch replaces drm_atomic_helper_suspend/resume() with drm_mode_config_helper_suspend/resume() to remove exynos specific suspend_state. Signed-off-by:
-
Dave Airlie authored
Merge tag 'omapdrm-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm fixes and cleanups for 4.20 - fix memory barrier bug in DMM driver - fix interrupt management in DMM driver - partial workaround for errata i878 - fix use of freed memory - some cleanups Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2018-10-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - Add EXPERT config option to allow phys mem leak from fbdev for blob drivers (Neil) Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Jordan Crouse authored
The target definition for a630 didn't set a reasonable value for inactive_period so it defaulted to zero and we were essentially powering down after every submission. Set it back to the default value to keep the GPU from bouncing too much during regular workloads. Signed-off-by:
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_framebuffer. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
-
Jordan Crouse authored
The only HFI communication with the GMU on sdm845 happens during initialization and all commands are synchronous. A fancy interrupt tasklet and associated infrastructure is entirely not eeded and puts us at the mercy of the scheduler. Instead poll for the message signal and handle the response immediately and go on our way. Signed-off-by:
-
