- 11 Oct, 2019 3 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2019-10-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix CML display by adding a missing ID. - Drop redundant list_del_init - Only enqueue already completed requests to avoid races - Fixup preempt-to-busy vs reset of a virtual request - Protect peeking at execlists->active - execlists->active is serialised by the tasklet drm-intel-next-fixes-2019-09-19: - Extend old HSW workaround to fix some GPU hangs on Haswell GT2 - Fix return error code on GEM mmap. - White list a chicken bit register for push constants legacy mode on Mesa - Fix resume issue related to GGTT restore - Remove incorrect BUG_ON on execlist's schedule-out - Fix unrecoverable GPU hangs with Vulkan compute workloads on SKL drm-intel-next-fixes-2019-09-26: - Fix concurrence on cases where requests where getting retired at same time as resubmitted to HW - Fix gen9 display resolutions by setting the right max plane width - Fix GPU hang on preemption - Mark contents as dirty on a write fault. This was breaking cursor sprite with dumb buffers. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191010143039.GA15313@intel.com
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
drm-fixes-5.4-2019-10-09: amdgpu: - fix memory leak in bo_list ioctl error path Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Short summary of fixes pull (less than what git shortlog provides): - SPI Aliases fixes for panels - One fix for the tc358767 bridge dealing with visual artifacts Signed-off-by:
-
- 10 Oct, 2019 1 commit
-
-
Tomi Valkeinen authored
max_tu_symbol was programmed to TU_SIZE_RECOMMENDED - 1, which is not what the spec says. The spec says: roundup ((input active video bandwidth in bytes/output active video bandwidth in bytes) * tu_size) It is not quite clear what the above means, but calculating max_tu_symbol = (input Bps / output Bps) * tu_size seems to work and fixes the issues seen. This fixes artifacts in some videomodes (e.g. 1024x768@60 on 2-lanes & 1.62Gbps was pretty bad for me). Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190924131702.9988-1-tomi.valkeinen@ti.com
-
- 09 Oct, 2019 7 commits
-
-
Chris Wilson authored
The active/pending execlists is no longer protected by the engine->active.lock, but is serialised by the tasklet instead. Update the locking around the debug and stats to follow suit. v2: local_bh_disable() to prevent recursing into the tasklet in case we trigger a softirq (Tvrtko) Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191009160906.16195-1-chris@chris-wilson.co.uk (cherry picked from commit c36eebd9) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Chris Wilson authored
Now that we dropped the engine->active.lock serialisation from around process_csb(), direct submission can run concurrently to the interrupt handler. As such execlists->active may be advanced as we dequeue, dropping the reference to the request. We need to employ our RCU request protection to ensure that the request is not freed too early. Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by:
-
Chris Wilson authored
Due to the nature of preempt-to-busy the execlists active tracking and the schedule queue may become temporarily desync'ed (between resubmission to HW and its ack from HW). This means that we may have unwound a request and passed it back to the virtual engine, but it is still inflight on the HW and may even result in a GPU hang. If we detect that GPU hang and try to reset, the hanging request->engine will no longer match the current engine, which means that the request is not on the execlists active list and we should not try to find an older incomplete request. Given that we have deduced this must be a request on a virtual engine, it is the single active request in the context and so must be guilty (as the context is still inflight, it is prevented from being executed on another engine as we process the reset). Fixes: 22b7a426 ("drm/i915/execlists: Preempt-to-busy") Signed-off-by:
-
Chris Wilson authored
If we are asked to submit a completed request, just move it onto the active-list without modifying it's payload. If we try to emit the modified payload of a completed request, we risk racing with the ring->head update during retirement which may advance the head past our breadcrumb and so we generate a warning for the emission being behind the RING_HEAD. v2: Commentary for the sneaky, shared responsibility between functions. v3: Spelling mistakes and bonus assertion Signed-off-by:
-
Chris Wilson authored
Since amalgamating the queued and active lists in commit 422d7df4 ("drm/i915: Replace engine->timeline with a plain list"), performing a i915_request_submit() will remove the request from the execlists priority queue. References: 422d7df4 ("drm/i915: Replace engine->timeline with a plain list") Signed-off-by:
-
Matt Roper authored
The CMP PCH ID we have in the driver is correct for the CML-U machines we have in our CI system, but the CML-S and CML-H CI machines appear to use a different PCH ID, leading our driver to detect no PCH for them. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> References: 729ae330 ("drm/i915/cml: Introduce Comet Lake PCH") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111461Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Acked-by:
-
Nirmoy Das authored
cleanup error handling code and make sure temporary info array with the handles are freed by amdgpu_bo_list_put() on idr_replace()'s failure. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- 08 Oct, 2019 5 commits
-
-
Laurent Pinchart authored
The panel-tpo-td043mtea1 driver incorrectly includes the OF vendor prefix in its SPI alias. Fix it, and move the manual alias to an SPI module device table. Fixes: dc2e1e5b ("drm/panel: Add driver for the Toppoly TD043MTEA1 panel") Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by:
-
Laurent Pinchart authored
The panel-tpo-td028ttec1 driver incorrectly includes the OF vendor prefix in its SPI alias. Fix it. Fixes: 415b8dd0 ("drm/panel: Add driver for the Toppoly TD028TTEC1 panel") Reported-by:
Andreas Kemnade <andreas@kemnade.info>
-
Laurent Pinchart authored
The panel-sony-acx565akm driver incorrectly includes the OF vendor prefix in its SPI alias. Fix it, and move the manual alias to an SPI module device table. Fixes: 1c8fc3f0 ("drm/panel: Add driver for the Sony ACX565AKM panel") Reported-by:
-
Laurent Pinchart authored
The panel-nec-nl8048hl11 driver incorrectly includes the OF vendor prefix in its SPI alias. Fix it, and move the manual alias to an SPI module device table. Fixes: df439abe ("drm/panel: Add driver for the NEC NL8048HL11 panel") Reported-by:
-
Laurent Pinchart authored
The panel-lg-lb035q02 driver incorrectly includes the OF vendor prefix in its SPI alias. Fix it, and move the manual alias to an SPI module device table. Fixes: f5b0c654 ("drm/panel: Add driver for the LG Philips LB035Q02 panel") Reported-by:
-
- 07 Oct, 2019 9 commits
-
-
Chris Wilson authored
Since dropping the set-to-gtt-domain in commit a679f58d ("drm/i915: Flush pages on acquisition"), we no longer mark the contents as dirty on a write fault. This has the issue of us then not marking the pages as dirty on releasing the buffer, which means the contents are not written out to the swap device (should we ever pick that buffer as a victim). Notably, this is visible in the dumb buffer interface used for cursors. Having updated the cursor contents via mmap, and swapped away, if the shrinker should evict the old cursor, upon next reuse, the cursor would be invisible. E.g. echo 80 > /proc/sys/kernel/sysrq ; echo f > /proc/sysrq-trigger Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111541 Fixes: a679f58d ("drm/i915: Flush pages on acquisition") Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190920121821.7223-1-chris@chris-wilson.co.uk (cherry picked from commit 5028851c) Signed-off-by:
-
Chris Wilson authored
Force bonded requests to run on distinct engines so that they cannot be shuffled onto the same engine where timeslicing will reverse the order. A bonded request will often wait on a semaphore signaled by its master, creating an implicit dependency -- if we ignore that implicit dependency and allow the bonded request to run on the same engine and before its master, we will cause a GPU hang. [Whether it will hang the GPU is debatable, we should keep on timeslicing and each timeslice should be "accidentally" counted as forward progress, in which case it should run but at one-half to one-third speed.] We can prevent this inversion by restricting which engines we allow ourselves to jump to upon preemption, i.e. baking in the arrangement established at first execution. (We should also consider capturing the implicit dependency using i915_sched_add_dependency(), but first we need to think about the constraints that requires on the execution/retirement ordering.) Fixes: 8ee36e04 ("drm/i915/execlists: Minimalistic timeslicing") References: ee113690 ("drm/i915/execlists: Virtual engine bonding") Testcase: igt/gem_exec_balancer/bonded-slice Signed-off-by:
-
Ville Syrjälä authored
The officially validated plane width limit is 4k on skl+, however we already had people using 5k displays before we started to enforce the limit. Also it seems Windows allows 5k resolutions as well (though not sure if they do it with one plane or two). According to hw folks 5k should work with the possible exception of the following features: - Ytile (already limited to 4k) - FP16 (already limited to 4k) - render compression (already limited to 4k) - KVMR sprite and cursor (don't care) - horizontal panning (need to verify this) - pipe and plane scaling (need to verify this) So apart from last two items on that list we are already fine. We should really verify what happens with those last two items but I don't have a 5k display on hand atm so it'll have to wait. In the meantime let's just bump the limit back up to 5k since several users have already been using it without apparent issues. At least we'll be no worse off than we were prior to lowering the limits. Cc: stable@vger.kernel.org Cc: Sean Paul <sean@poorly.run> Cc: José Roberto de Souza <jose.souza@intel.com> Tested-by:
Leho Kraav <leho@kraav.com> Fixes: 372b9ffb ("drm/i915: Fix skl+ max plane width") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111501Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190905135044.2001-1-ville.syrjala@linux.intel.comReviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Sean Paul <sean@poorly.run> (cherry picked from commit bed34ef5) Signed-off-by:
-
Chris Wilson authored
When using virtual engines, the rq->engine is not stable until we hold the engine->active.lock (as the virtual engine may be exchanged with the sibling). Since commit 22b7a426 ("drm/i915/execlists: Preempt-to-busy") we may retire a request concurrently with resubmitting it to HW, we need to be extra careful to verify we are holding the correct lock for the request's active list. This is similar to the issue we saw with rescheduling the virtual requests, see sched_lock_engine(). Or else: <4> [876.736126] list_add corruption. prev->next should be next (ffff8883f931a1f8), but was dead000000000100. (prev=ffff888361ffa610). <4> [876.736136] WARNING: CPU: 2 PID: 21 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 <4> [876.736137] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_intel_nhlt snd_hda_codec snd_hwdep snd_hda_core ghash_clmulni_intel e1000e cdc_ether usbnet mii snd_pcm ptp pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915] <4> [876.736154] CPU: 2 PID: 21 Comm: ksoftirqd/2 Tainted: G U 5.3.0-CI-CI_DRM_6898+ #1 <4> [876.736156] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019 <4> [876.736157] RIP: 0010:__list_add_valid+0x4d/0x70 <4> [876.736159] Code: c3 48 89 d1 48 c7 c7 20 33 0e 82 48 89 c2 e8 4a 4a bc ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 70 33 0e 82 e8 33 4a bc ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 c0 33 0e 82 e8 <4> [876.736160] RSP: 0018:ffffc9000018bd30 EFLAGS: 00010082 <4> [876.736162] RAX: 0000000000000000 RBX: ffff888361ffc840 RCX: 0000000000000104 <4> [876.736163] RDX: 0000000080000104 RSI: 0000000000000000 RDI: 00000000ffffffff <4> [876.736164] RBP: ffffc9000018bd68 R08: 0000000000000000 R09: 0000000000000001 <4> [876.736165] R10: 00000000aed95de3 R11: 000000007fe927eb R12: ffff888361ffca10 <4> [876.736166] R13: ffff888361ffa610 R14: ffff888361ffc880 R15: ffff8883f931a1f8 <4> [876.736168] FS: 0000000000000000(0000) GS:ffff88849fd00000(0000) knlGS:0000000000000000 <4> [876.736169] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [876.736170] CR2: 00007f093a9173c0 CR3: 00000003bba08005 CR4: 0000000000760ee0 <4> [876.736171] PKRU: 55555554 <4> [876.736172] Call Trace: <4> [876.736226] __i915_request_submit+0x152/0x370 [i915] <4> [876.736263] __execlists_submission_tasklet+0x6da/0x1f50 [i915] <4> [876.736293] ? execlists_submission_tasklet+0x29/0x50 [i915] <4> [876.736321] execlists_submission_tasklet+0x34/0x50 [i915] <4> [876.736325] tasklet_action_common.isra.5+0x47/0xb0 <4> [876.736328] __do_softirq+0xd8/0x4ae <4> [876.736332] ? smpboot_thread_fn+0x23/0x280 <4> [876.736334] ? smpboot_thread_fn+0x6b/0x280 <4> [876.736336] run_ksoftirqd+0x2b/0x50 <4> [876.736338] smpboot_thread_fn+0x1d3/0x280 <4> [876.736341] ? sort_range+0x20/0x20 <4> [876.736343] kthread+0x119/0x130 <4> [876.736345] ? kthread_park+0xa0/0xa0 <4> [876.736347] ret_from_fork+0x24/0x50 <4> [876.736353] irq event stamp: 2290145 <4> [876.736356] hardirqs last enabled at (2290144): [<ffffffff8123cde8>] __slab_free+0x3e8/0x500 <4> [876.736358] hardirqs last disabled at (2290145): [<ffffffff819cfb4d>] _raw_spin_lock_irqsave+0xd/0x50 <4> [876.736360] softirqs last enabled at (2290114): [<ffffffff81c0033e>] __do_softirq+0x33e/0x4ae <4> [876.736361] softirqs last disabled at (2290119): [<ffffffff810b815b>] run_ksoftirqd+0x2b/0x50 <4> [876.736363] WARNING: CPU: 2 PID: 21 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 <4> [876.736364] ---[ end trace 3e58d6c7356c65bf ]--- <4> [876.736406] ------------[ cut here ]------------ <4> [876.736415] list_del corruption. prev->next should be ffff888361ffca10, but was ffff88840ac2c730 <4> [876.736421] WARNING: CPU: 2 PID: 5490 at lib/list_debug.c:53 __list_del_entry_valid+0x79/0x90 <4> [876.736422] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_intel_nhlt snd_hda_codec snd_hwdep snd_hda_core ghash_clmulni_intel e1000e cdc_ether usbnet mii snd_pcm ptp pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915] <4> [876.736433] CPU: 2 PID: 5490 Comm: i915_selftest Tainted: G U W 5.3.0-CI-CI_DRM_6898+ #1 <4> [876.736435] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019 <4> [876.736436] RIP: 0010:__list_del_entry_valid+0x79/0x90 <4> [876.736438] Code: 0b 31 c0 c3 48 89 fe 48 c7 c7 30 34 0e 82 e8 ae 49 bc ff 0f 0b 31 c0 c3 48 89 f2 48 89 fe 48 c7 c7 68 34 0e 82 e8 97 49 bc ff <0f> 0b 31 c0 c3 48 c7 c7 a8 34 0e 82 e8 86 49 bc ff 0f 0b 31 c0 c3 <4> [876.736439] RSP: 0018:ffffc900003ef758 EFLAGS: 00010086 <4> [876.736440] RAX: 0000000000000000 RBX: ffff888361ffc840 RCX: 0000000000000002 <4> [876.736442] RDX: 0000000080000002 RSI: 0000000000000000 RDI: 00000000ffffffff <4> [876.736443] RBP: ffffc900003ef780 R08: 0000000000000000 R09: 0000000000000001 <4> [876.736444] R10: 000000001418e4b7 R11: 000000007f0ea93b R12: ffff888361ffcab8 <4> [876.736445] R13: ffff88843b6d0000 R14: 000000000000217c R15: 0000000000000001 <4> [876.736447] FS: 00007f4e6f255240(0000) GS:ffff88849fd00000(0000) knlGS:0000000000000000 <4> [876.736448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [876.736449] CR2: 00007f093a9173c0 CR3: 00000003bba08005 CR4: 0000000000760ee0 <4> [876.736450] PKRU: 55555554 <4> [876.736451] Call Trace: <4> [876.736488] i915_request_retire+0x224/0x8e0 [i915] <4> [876.736521] i915_request_create+0x4b/0x1b0 [i915] <4> [876.736550] nop_virtual_engine+0x230/0x4d0 [i915] Fixes: 22b7a426 ("drm/i915/execlists: Preempt-to-busy") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111695Signed-off-by:
-
Chris Wilson authored
A few times in CI, we have detected a GPU hang on our Haswell GT2 systems with the characteristic IPEHR of 0x780c0000. When the PSMI w/a was first introducted, it was applied to all Haswell, but later on we found an erratum that supposedly restricted the issue to GT1 and so constrained it only be applied on GT1. That may have been a mistake... Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111692 Fixes: 167bc759 ("drm/i915: Restrict PSMI context load w/a to Haswell GT1") References: 2c550183 ("drm/i915: Disable PSMI sleep messages on all rings around context switches") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190917194746.26710-1-chris@chris-wilson.co.uk (cherry picked from commit 56c05de6) Signed-off-by:
-
Chris Wilson authored
While srcu may use an integer tag, it does not exclude potential error codes and so may overlap with our own use of -EINTR. Use a separate outparam to store the tag, and report the error code separately. Fixes: 2caffbf1 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset") Signed-off-by:
-
Kenneth Graunke authored
This allows userspace to use "legacy" mode for push constants, where they are committed at 3DPRIMITIVE or flush time, rather than being committed at 3DSTATE_BINDING_TABLE_POINTERS_XS time. Gen6-8 and Gen11 both use the "legacy" behavior - only Gen9 works in the "new" way. Conflating push constants with binding tables is painful for userspace, we would like to be able to avoid doing so. Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> Cc: stable@vger.kernel.org Reviewed-by:
-
Chris Wilson authored
As soon as we re-enable the various functions within the HW, they may go off and read data via a GGTT offset. Hence, if we have not yet restored the GGTT PTE before then, they may read and even *write* random locations in memory. Detected by DMAR faults during resume. Signed-off-by:
-
Chris Wilson authored
As we may unwind incomplete requests (for preemption) prior to processing the CSB and the schedule-out events, we may update rq->engine (resetting it to point back to the parent virtual engine) prior to calling execlists_schedule_out(), invalidating the assertion that the request still points to the inflight engine. (The likelihood of this is increased if the CSB interrupt processing is pushed to the ksoftirqd for being too slow and direct submission overtakes it.) Tvrtko summarised it as: "So unwind from direct submission resets rq->engine and races with process_csb from the tasklet which notices request has actually completed." Reported-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by:
-
- 06 Oct, 2019 4 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
In commit 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") we changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the executable mappings. Then, people reported that it broke some binaries that had overlapping segments from the same file, and commit ad55eac7 ("elf: enforce MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some overlaying elf segment cases. But only some - despite the summary line of that commit, it only did it when it also does a temporary brk vma for one obvious overlapping case. Now Russell King reports another overlapping case with old 32-bit x86 binaries, which doesn't trigger that limited case. End result: we had better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED. Yes, it's a sign of old binaries generated with old tool-chains, but we do pride ourselves on not breaking existing setups. This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp() and the old load_elf_library() use-cases, because nobody has reported breakage for those. Yet. Note that in all the cases seen so far, the overlapping elf sections seem to be just re-mapping of the same executable with different section attributes. We could possibly introduce a new MAP_FIXED_NOFILECHANGE flag or similar, which acts like NOREPLACE, but allows just remapping the same executable file using different protection flags. It's not clear that would make a huge difference to anything, but if people really hate that "elf remaps over previous maps" behavior, maybe at least a more limited form of remapping would alleviate some concerns. Alternatively, we should take a look at our elf_map() logic to see if we end up not mapping things properly the first time. In the meantime, this is the minimal "don't do that then" patch while people hopefully think about it more. Reported-by:
Russell King <linux@armlinux.org.uk> Fixes: 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") Fixes: ad55eac7 ("elf: enforce MAP_FIXED on overlaying elf segments") Cc: Michal Hocko <mhocko@suse.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping regression fix from Christoph Hellwig: "Revert an incorret hunk from a patch that caused problems on various arm boards (Andrey Smirnov)" * tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: fix false positive warnings in dma_common_free_remap()
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few fixes this time around: - Fixup of some clock specifications for DRA7 (device-tree fix) - Removal of some dead/legacy CPU OPP/PM code for OMAP that throws warnings at boot - A few more minor fixups for OMAPs, most around display - Enable STM32 QSPI as =y since their rootfs sometimes comes from there - Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool - Fix of thermal zone definition for ux500 (5.4 regression)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support ARM: dts: ux500: Fix up the CPU thermal zone arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y ARM: dts: am4372: Set memory bandwidth limit for DISPC ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage() ARM: OMAP2+: Add missing LCDC midlemode for am335x ARM: OMAP2+: Fix missing reset done flag for am3 and am43 ARM: dts: Fix gpio0 flags for am335x-icev2 ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable DRM_TI_TFP410 DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again ARM: dts: Fix wrong clocks for dra7 mcasp clk: ti: dra7: Fix mcasp8 clock bits
-
- 05 Oct, 2019 11 commits
-
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - remove unneeded ar-option and KBUILD_ARFLAGS - remove long-deprecated SUBDIRS - fix modpost to suppress false-positive warnings for UML builds - fix namespace.pl to handle relative paths to ${objtree}, ${srctree} - make setlocalversion work for /bin/sh - make header archive reproducible - fix some Makefiles and documents * tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kheaders: make headers archive reproducible kbuild: update compile-test header list for v5.4-rc2 kbuild: two minor updates for Documentation/kbuild/modules.rst scripts/setlocalversion: clear local variable to make it work for sh namespace: fix namespace.pl script to support relative paths video/logo: do not generate unneeded logo C files video/logo: remove unneeded *.o pattern from clean-files integrity: remove pointless subdir-$(CONFIG_...) integrity: remove unneeded, broken attempt to add -fshort-wchar modpost: fix static EXPORT_SYMBOL warnings for UML build kbuild: correct formatting of header in kbuild module docs kbuild: remove SUBDIRS support kbuild: remove ar-option and KBUILD_ARFLAGS
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Twelve patches mostly small but obvious fixes or cosmetic but small updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix Nport ID display value scsi: qla2xxx: Fix N2N link up fail scsi: qla2xxx: Fix N2N link reset scsi: qla2xxx: Optimize NPIV tear down process scsi: qla2xxx: Fix stale mem access on driver unload scsi: qla2xxx: Fix unbound sleep in fcport delete path. scsi: qla2xxx: Silence fwdump template message scsi: hisi_sas: Make three functions static scsi: megaraid: disable device when probe failed after enabled device scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue scsi: qedf: Remove always false 'tmp_prio < 0' statement scsi: ufs: skip shutdown if hba is not powered scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF
-
Linus Torvalds authored
This makes getdents() and getdents64() do sanity checking on the pathname that it gives to user space. And to mitigate the performance impact of that, it first cleans up the way it does the user copying, so that the code avoids doing the SMAP/PAN updates between each part of the dirent structure write. I really wanted to do this during the merge window, but didn't have time. The conversion of filldir to unsafe_put_user() is something I've had around for years now in a private branch, but the extra pathname checking finally made me clean it up to the point where it is mergable. It's worth noting that the filename validity checking really should be a bit smarter: it would be much better to delay the error reporting until the end of the readdir, so that non-corrupted filenames are still returned. But that involves bigger changes, so let's see if anybody actually hits the corrupt directory entry case before worrying about it further. * branch 'readdir': Make filldir[64]() verify the directory entry filename is valid Convert filldir[64]() from __put_user() to unsafe_put_user()
-
Linus Torvalds authored
This has been discussed several times, and now filesystem people are talking about doing it individually at the filesystem layer, so head that off at the pass and just do it in getdents{64}(). This is partially based on a patch by Jann Horn, but checks for NUL bytes as well, and somewhat simplified. There's also commentary about how it might be better if invalid names due to filesystem corruption don't cause an immediate failure, but only an error at the end of the readdir(), so that people can still see the filenames that are ok. There's also been discussion about just how much POSIX strictly speaking requires this since it's about filesystem corruption. It's really more "protect user space from bad behavior" as pointed out by Jann. But since Eric Biederman looked up the POSIX wording, here it is for context: "From readdir: The readdir() function shall return a pointer to a structure representing the directory entry at the current position in the directory stream specified by the argument dirp, and position the directory stream at the next entry. It shall return a null pointer upon reaching the end of the directory stream. The structure dirent defined in the <dirent.h> header describes a directory entry. From definitions: 3.129 Directory Entry (or Link) An object that associates a filename with a file. Several directory entries can associate names with the same file. ... 3.169 Filename A name consisting of 1 to {NAME_MAX} bytes used to name a file. The characters composing the name may be selected from the set of all character values excluding the slash character and the null byte. The filenames dot and dot-dot have special meaning. A filename is sometimes referred to as a 'pathname component'." Note that I didn't bother adding the checks to any legacy interfaces that nobody uses. Also note that if this ends up being noticeable as a performance regression, we can fix that to do a much more optimized model that checks for both NUL and '/' at the same time one word at a time. We haven't really tended to optimize 'memchr()', and it only checks for one pattern at a time anyway, and we really _should_ check for NUL too (but see the comment about "soft errors" in the code about why it currently only checks for '/') See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name lookup code looks for pathname terminating characters in parallel. Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/ Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jann Horn <jannh@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: -
Linus Torvalds authored
We really should avoid the "__{get,put}_user()" functions entirely, because they can easily be mis-used and the original intent of being used for simple direct user accesses no longer holds in a post-SMAP/PAN world. Manually optimizing away the user access range check makes no sense any more, when the range check is generally much cheaper than the "enable user accesses" code that the __{get,put}_user() functions still need. So instead of __put_user(), use the unsafe_put_user() interface with user_access_{begin,end}() that really does generate better code these days, and which is generally a nicer interface. Under some loads, the multiple user writes that filldir() does are actually quite noticeable. This also makes the dirent name copy use unsafe_put_user() with a couple of macros. We do not want to make function calls with SMAP/PAN disabled, and the code this generates is quite good when the architecture uses "asm goto" for unsafe_put_user() like x86 does. Note that this doesn't bother with the legacy cases. Nobody should use them anyway, so performance doesn't really matter there. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold. 2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric Dumazet. 3) txq null deref in mac80211, from Miaoqing Pan. 4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann. 5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso. 6) Avoid division by zero in taprio scheduler, from Vladimir Oltean. 7) Various xgmac fixes in stmmac driver from Jose Abreu. 8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from Michal Kubecek. 9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij. 10) Fix sleep while atomic in sja1105, from Vladimir Oltean. 11) Suspend/resume deadlock in stmmac, from Thierry Reding. 12) Various UDP GSO fixes from Josh Hunt. 13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric Dumazet. 14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern. 15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) selftests/net: add nettest to .gitignore net: qlogic: Fix memory leak in ql_alloc_large_buffers nfc: fix memory leak in llcp_sock_bind() sch_dsmark: fix potential NULL deref in dsmark_init() net: phy: at803x: use operating parameters from PHY-specific status net: phy: extract pause mode net: phy: extract link partner advertisement reading net: phy: fix write to mii-ctrl1000 register ipv6: Handle missing host route in __ipv6_ifa_notify net: phy: allow for reset line to be tied to a sleepy GPIO controller net: ipv4: avoid mixed n_redirects and rate_tokens usage r8152: Set macpassthru in reset_resume callback cxgb4:Fix out-of-bounds MSI-X info array access Revert "ipv6: Handle race in addrconf_dad_work" net: make sock_prot_memory_pressure() return "const char *" rxrpc: Fix rxrpc_recvmsg tracepoint qmi_wwan: add support for Cinterion CLS8 devices tcp: fix slab-out-of-bounds in tcp_zerocopy_receive() lib: textsearch: fix escapes in example code udp: only do GSO if # of segs > 1 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - defconfig updates - Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i" constraint for function arguments. Two kvm changes acked-by Christian Borntraeger. - Fix -Wunused-but-set-variable warnings in mm code. - Avoid a constant misuse in qdio. - Handle a case when cpumf is temporarily unavailable. * tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: KVM: s390: mark __insn32_query() as __always_inline KVM: s390: fix __insn32_query() inline assembly s390: update defconfigs s390/pci: mark function(s) __always_inline s390/mm: mark function(s) __always_inline s390/jump_label: mark function(s) __always_inline s390/cpu_mf: mark function(s) __always_inline s390/atomic,bitops: mark function(s) __always_inline s390/mm: fix -Wunused-but-set-variable warnings s390: mark __cpacf_query() as __always_inline s390/qdio: clarify size of the QIB parm area s390/cpumf: Fix indentation in sampling device driver s390/cpumsf: Check for CPU Measurement sampling s390/cpumf: Use consistant debug print format
-
Heiko Carstens authored
__insn32_query() will not compile if the compiler decides to not inline it, since it contains an inline assembly with an "i" constraint with variable contents. Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com>
-
Heiko Carstens authored
The inline assembly constraints of __insn32_query() tell the compiler that only the first byte of "query" is being written to. Intended was probably that 32 bytes are written to. Fix and simplify the code and just use a "memory" clobber. Fixes: d6681397 ("KVM: s390: provide query function for instructions returning 32 byte") Cc: stable@vger.kernel.org # v5.2+ Acked-by:
-
Andrey Smirnov authored
Commit 5cf45379 ("dma-mapping: introduce a dma_common_find_pages helper") changed invalid input check in dma_common_free_remap() from: if (!area || !area->flags != VM_DMA_COHERENT) to if (!area || !area->flags != VM_DMA_COHERENT || !area->pages) which seem to produce false positives for memory obtained via dma_common_contiguous_remap() This triggers the following warning message when doing "reboot" on ZII VF610 Dev Board Rev B: WARNING: CPU: 0 PID: 1 at kernel/dma/remap.c:112 dma_common_free_remap+0x88/0x8c trying to free invalid coherent area: 9ef82980 Modules linked in: CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.3.0-rc6-next-20190820 #119 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<8010d1ec>] (dump_backtrace) from [<8010d588>] (show_stack+0x20/0x24) r7:8015ed78 r6:00000009 r5:00000000 r4:9f4d9b14 [<8010d568>] (show_stack) from [<8077e3f0>] (dump_stack+0x24/0x28) [<8077e3cc>] (dump_stack) from [<801197a0>] (__warn.part.3+0xcc/0xe4) [<801196d4>] (__warn.part.3) from [<80119830>] (warn_slowpath_fmt+0x78/0x94) r6:00000070 r5:808e540c r4:81c03048 [<801197bc>] (warn_slowpath_fmt) from [<8015ed78>] (dma_common_free_remap+0x88/0x8c) r3:9ef82980 r2:808e53e0 r7:00001000 r6:a0b1e000 r5:a0b1e000 r4:00001000 [<8015ecf0>] (dma_common_free_remap) from [<8010fa9c>] (remap_allocator_free+0x60/0x68) r5:81c03048 r4:9f4d9b78 [<8010fa3c>] (remap_allocator_free) from [<801100d0>] (__arm_dma_free.constprop.3+0xf8/0x148) r5:81c03048 r4:9ef82900 [<8010ffd8>] (__arm_dma_free.constprop.3) from [<80110144>] (arm_dma_free+0x24/0x2c) r5:9f563410 r4:80110120 [<80110120>] (arm_dma_free) from [<8015d80c>] (dma_free_attrs+0xa0/0xdc) [<8015d76c>] (dma_free_attrs) from [<8020f3e4>] (dma_pool_destroy+0xc0/0x154) r8:9efa8860 r7:808f02f0 r6:808f02d0 r5:9ef82880 r4:9ef82780 [<8020f324>] (dma_pool_destroy) from [<805525d0>] (ehci_mem_cleanup+0x6c/0x150) r7:9f563410 r6:9efa8810 r5:00000000 r4:9efd0148 [<80552564>] (ehci_mem_cleanup) from [<80558e0c>] (ehci_stop+0xac/0xc0) r5:9efd0148 r4:9efd0000 [<80558d60>] (ehci_stop) from [<8053c4bc>] (usb_remove_hcd+0xf4/0x1b0) r7:9f563410 r6:9efd0074 r5:81c03048 r4:9efd0000 [<8053c3c8>] (usb_remove_hcd) from [<8056361c>] (host_stop+0x48/0xb8) r7:9f563410 r6:9efd0000 r5:9f5f4040 r4:9f5f5040 [<805635d4>] (host_stop) from [<80563d0c>] (ci_hdrc_host_destroy+0x34/0x38) r7:9f563410 r6:9f5f5040 r5:9efa8800 r4:9f5f4040 [<80563cd8>] (ci_hdrc_host_destroy) from [<8055ef18>] (ci_hdrc_remove+0x50/0x10c) [<8055eec8>] (ci_hdrc_remove) from [<804a2ed8>] (platform_drv_remove+0x34/0x4c) r7:9f563410 r6:81c4f99c r5:9efa8810 r4:9efa8810 [<804a2ea4>] (platform_drv_remove) from [<804a18a8>] (device_release_driver_internal+0xec/0x19c) r5:00000000 r4:9efa8810 [<804a17bc>] (device_release_driver_internal) from [<804a1978>] (device_release_driver+0x20/0x24) r7:9f563410 r6:81c41ed0 r5:9efa8810 r4:9f4a1dac [<804a1958>] (device_release_driver) from [<804a01b8>] (bus_remove_device+0xdc/0x108) [<804a00dc>] (bus_remove_device) from [<8049c204>] (device_del+0x150/0x36c) r7:9f563410 r6:81c03048 r5:9efa8854 r4:9efa8810 [<8049c0b4>] (device_del) from [<804a3368>] (platform_device_del.part.2+0x20/0x84) r10:9f563414 r9:809177e0 r8:81cb07dc r7:81c78320 r6:9f563454 r5:9efa8800 r4:9efa8800 [<804a3348>] (platform_device_del.part.2) from [<804a3420>] (platform_device_unregister+0x28/0x34) r5:9f563400 r4:9efa8800 [<804a33f8>] (platform_device_unregister) from [<8055dce0>] (ci_hdrc_remove_device+0x1c/0x30) r5:9f563400 r4:00000001 [<8055dcc4>] (ci_hdrc_remove_device) from [<805652ac>] (ci_hdrc_imx_remove+0x38/0x118) r7:81c78320 r6:9f563454 r5:9f563410 r4:9f541010 [<8056538c>] (ci_hdrc_imx_shutdown) from [<804a2970>] (platform_drv_shutdown+0x2c/0x30) [<804a2944>] (platform_drv_shutdown) from [<8049e4fc>] (device_shutdown+0x158/0x1f0) [<8049e3a4>] (device_shutdown) from [<8013ac80>] (kernel_restart_prepare+0x44/0x48) r10:00000058 r9:9f4d8000 r8:fee1dead r7:379ce700 r6:81c0b280 r5:81c03048 r4:00000000 [<8013ac3c>] (kernel_restart_prepare) from [<8013ad14>] (kernel_restart+0x1c/0x60) [<8013acf8>] (kernel_restart) from [<8013af84>] (__do_sys_reboot+0xe0/0x1d8) r5:81c03048 r4:00000000 [<8013aea4>] (__do_sys_reboot) from [<8013b0ec>] (sys_reboot+0x18/0x1c) r8:80101204 r7:00000058 r6:00000000 r5:00000000 r4:00000000 [<8013b0d4>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54) Exception stack(0x9f4d9fa8 to 0x9f4d9ff0) 9fa0: 00000000 00000000 fee1dead 28121969 01234567 379ce700 9fc0: 00000000 00000000 00000000 00000058 00000000 00000000 00000000 00016d04 9fe0: 00028e0c 7ec87c64 000135ec 76c1f410 Restore original invalid input check in dma_common_free_remap() to avoid this problem. Fixes: 5cf45379 ("dma-mapping: introduce a dma_common_find_pages helper") Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> [hch: just revert the offending hunk instead of creating a new helper] Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Dmitry Goldin authored
In commit 43d8ce9d ("Provide in-kernel headers to make extending kernel easier") a new mechanism was introduced, for kernels >=5.2, which embeds the kernel headers in the kernel image or a module and exposes them in procfs for use by userland tools. The archive containing the header files has nondeterminism caused by header files metadata. This patch normalizes the metadata and utilizes KBUILD_BUILD_TIMESTAMP if provided and otherwise falls back to the default behaviour. In commit f7b101d3 ("kheaders: Move from proc to sysfs") it was modified to use sysfs and the script for generation of the archive was renamed to what is being patched. Signed-off-by:
Dmitry Goldin <dgoldin+lkml@protonmail.ch> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
