Add DU node to RZ/G2L SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240222132117.137729-2-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Describe the QSPI FLASH on the Gray Hawk Single board.
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/96d6567024cef9fcd6b04f92a697301c1c8d1d8e.1708354463.git.geert+renesas@glider.be

Add a device node for the SPI Multi I/O Bus Controller (RPC-IF) on the
Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/26f9c5d5a7944db3813ed53459aa9c5767c1bdc0.1708354463.git.geert+renesas@glider.be

Add device nodes for the Direct Memory Access Controllers for System
(SYS-DMAC) on the Renesas R-Car V4M (R8A779H0) SoC.

Link all DMA consumers to the corresponding DMA controller channels.

Based on patches in the BSP by Thanh Le and Minh Le.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/44de886cd83f41659d2f6962c0e277f548fb0adb.1707916707.git.geert+renesas@glider.be

Describe the eMMC on the Gray Hawk Single board.
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/208bfc781b1488e253e19626ad80876c34c86758.1707915763.git.geert+renesas@glider.be

Add a device node for SD/MMC on Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4433cd73049ae517ea163bc703555ee8d9a4dd82.1707915763.git.geert+renesas@glider.be

Sound Driver requires "reg-names" to get register info.  Current driver
tries to get register info via "reg" instead of "reg-names" as backup
plan, but this support will be removed soon.
Use "reg-namess" for r8a7778 sound.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87cyszpwmp.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Enable CRU and CSI on RZ/G2UL SMARC EVK and tie the CSI to the OV5645
sensor using a Device Tree overlay.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213141300.159847-1-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Describe the wiring of the first Ethernet AVB instance to the Micrel
KSZ9031RNXVB PHY.
Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b83b21b6477a0e31f99eaedbd36c03014b72ec8a.1707661382.git.geert+renesas@glider.be

Add device nodes for the Renesas Ethernet AVB (EtherAVB-IF) blocks on
the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ae7488c0065b455b45f23253c997a94f4850064f.1707661382.git.geert+renesas@glider.be

All Ethernet AVB instances on R-Car V4H have registers related to UDP/IP
support, but the declared register blocks for the first two instances
are too small to cover them.

Fix this by extending the register block sizes.

Fixes: 848c82db ("arm64: dts: renesas: r8a779g0: Add RAVB nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/83437778614a7c96f4d8f1be98dffeee29bb4a0b.1707660323.git.geert+renesas@glider.be

All Ethernet AVB instances on R-Car V3U have registers related to UDP/IP
support, but the declared register blocks for the first two instances
are too small to cover them.

Fix this by extending the register block sizes.

Fixes: 5a633320 ("arm64: dts: renesas: r8a779a0: Add Ethernet-AVB support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ce6ce3c4b1495e02e7c1803fca810a7178a84500.1707660323.git.geert+renesas@glider.be

Add PSCI support to enable suspend/resume with the help of TF-A.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240208135629.2840932-3-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Ethernet IRQ GPIOs are marked as GPIO hogs.  Thus, these GPIOs are
requested at probe time without considering if there are other
peripherals that need them.  The Ethernet IRQ GPIOs are shared with
SDHI2.  Selection between Ethernet and SDHI2 is done through a hardware
switch.  To avoid scenarios where one wants to boot with SDHI2 support
and some SDHI pins are not propertly configured because of the GPIO
hogs, guard the Ethernet IRQ GPIO hogs with the proper build flag.

Fixes: 932ff0c8 ("arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240208124300.2740313-13-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The IRQC block on the RZ/G3S (R9A08G045) SoC supports ECCRAM error
interrupts too.  Add those missing interrupts to the IRQC node.

Fixes: 837918aa ("arm64: dts: renesas: r9a08g045: Add IA55 interrupt controller node")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240205144421.51195-4-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The IRQC IP block supports Bus error and ECCRAM interrupts on RZ/G2L and
alike SoC's (listed below).  Update the IRQC nodes with the missing
interrupts, and additionally, include the 'interrupt-names' properties
in the IRQC nodes so that the driver can parse interrupts by name.

  - R9A07G043U              - RZ/G2UL
  - R9A07G044L/R9A07G044LC  - RZ/{G2L,G2LC}
  - R9A07G054               - RZ/V2L

Fixes: 5edc51af ("arm64: dts: renesas: r9a07g044: Add IRQC node")
Fixes: 48ab6edd ("arm64: dts: renesas: r9a07g043u: Add IRQC node")
Fixes: 379478ab ("arm64: dts: renesas: r9a07g054: Add IRQC node")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240205144421.51195-3-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add operating points for running the Cortex-A76 CPU cores on R-Car V4M
at various speeds, up to the Normal (1.0 GHz).
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/736b5836ec2b54e8b36712866309dc1b7ee1fc48.1706796979.git.geert+renesas@glider.be

Describe the clocks for the four Cortex-A76 CPU cores.
CA76 CPU cores 0,1,2,3 are clocked by ZC0,ZC1,ZC2,ZC3.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c64cf6ca1590fa1a36b90a18fd70c831d5b8318e.1706796979.git.geert+renesas@glider.be

Support CPUIdle for ARM Cortex-A76 on R-Car V4M.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/848d176bdbcaf3bc44e5dae555afa9c812a19fd1.1706796979.git.geert+renesas@glider.be

Complete the description of the Cortex-A76 CPU cores and L3 cache
controllers on the Renesas R-Car V4M (R8A779H0) SoC, including CPU
topology and PSCI support for enabling CPU cores.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c2a38a0da74915bf2a9171e53886c83a1c732934.1706796979.git.geert+renesas@glider.be

Describe the cache configuration for the first Cortex-A76 CPU core on
the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9d56a46892c5e0957d244370e6809013cf815905.1706796979.git.geert+renesas@glider.be

Add device nodes for the General Purpose Input/Output (GPIO) blocks on
the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d4c1c40404ab84c7e7c07612077ca1a319ae7283.1706796918.git.geert+renesas@glider.be

Enable the I2C0 bus on the Gray Hawk Single board, and describe the I2C
EEPROMs present.

Based on patches for Gray Hawk in the BSP by Hai Pham.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/960595394a274b675f1ec9ec1c324e4cc1ac1f77.1706796660.git.geert+renesas@glider.be

Add device nodes for the I2C Bus Interfaces on the Renesas R-Car V4M
(R8A779H0) SoC.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/7dbbe13428273c5786ddff6ea7af6724fcdd4de8.1706796660.git.geert+renesas@glider.be

Sound uses the standard 5V supply, so rename the fixed regulator as
such. Also add properties documenting it is always on, also during boot.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129212350.33370-3-wsa+renesas@sang-engineering.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

It is named T1.8V in the schematics. Also add properties documenting it
is always on, also during boot.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129212350.33370-2-wsa+renesas@sang-engineering.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Without them, no power, so cards do not get recognized.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240129135840.28988-1-wsa+renesas@sang-engineering.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Complete the descriptions of the serial console and the external serial
clock by adding pin control.

Based on patches for Gray Hawk in the BSP by Hai Pham and Nghia Nguyen.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b1eb2d3364d5ead7f7bcf7a737c5914971db64d3.1706266286.git.geert+renesas@glider.be

Add a device node for the Pin Function Controller on the Renesas R-Car
V4M (R8A779H0) SoC.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0ab32290014b64ddbee5c9ec2808c8294d0b6192.1706266286.git.geert+renesas@glider.be

Enable the watchdog timer on the Gray Hawk Single board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/cf6effafd9e0472a457eed9d84a834abc3e1c833.1706790320.git.geert+renesas@glider.be

Add a device node for the RCLK Watchdog Timer (RWDT) on the Renesas
R-Car V4M (R8A779H0) SoC.
Signed-off-by: Minh Le <minh.le.aj@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/43bb03f3baa87b4be8ce953b1955df6b89387e4c.1706790320.git.geert+renesas@glider.be

Add the input capture interrupt on Timer Unit instances that have it.
Add "interrupt-names" properties for clarity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/5c70ad8c2ea14333616c5add31a4a958f4a47081.1705325654.git.geert+renesas@glider.be

Add the input capture interrupt on Timer Unit instances that have it.
Add "interrupt-names" properties for clarity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/389a18ee2cea96726462c28463cf212330f74ee3.1705325654.git.geert+renesas@glider.be

Add CSI and CRU nodes r9a07g043 (RZ/G2UL) SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240126133116.121981-4-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add initial support for the Renesas Gray Hawk Single board, which is
based on the R-Car V4M (R8A779H0) SoC:
  - Memory,
  - Crystal oscillators,
  - Serial console.

Based on the White Hawk Single DTS, and on a patch for the Gray Hawk
board stack in the BSP by Hai Pham.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/b657402113267acd57aece0b4c681b707e704455.1706194617.git.geert+renesas@glider.be

Add initial support for the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/4107bc3d7c31932da29e671ddf4b1564ba38a84c.1706194617.git.geert+renesas@glider.be

Renesas R-Car V4M DT Binding Definitions

Clock and Power Domain definitions for the Renesas R-Car V4M (R8A779H0)
SoC, shared by driver and DT source files.

Enable the watchdog interface (accessible by Cortex-A of RZ/G3S SoC) on
RZ/G3S SMARC SoM.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240122111115.2861835-11-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add the DT node for the watchdog IP accessible by Cortex-A of RZ/G3S
SoC (R9108G045).
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240122111115.2861835-10-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

R-Car V4H actually has two SCIF_CLK pins.
The second pin provides the SCIF_CLK signal for HSCIF2 and SCIF4.

Fixes: a4c31c56 ("arm64: dts: renesas: r8a779g0: Add SCIF nodes")
Fixes: 39d9dfc6 ("arm64: dts: renesas: r8a779g0: Add remaining HSCIF nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/72f20c1bf32187bd30a963cafe27252907d661f9.1705589612.git.geert+renesas@glider.be