Pull s390 updates from Martin Schwidefsky:
 "Pretty boring for a merge window pull.

  One change in behaviour is the patch for dasd driver, the module which
  provides the diagnose discipline is now loaded automatically.

  The SCLP code got a nice cleanup, a new global structure replaces a
  bunch of accessor functions.

  And a couple of random, small improvements"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: improve handling of hotplug event 0x301
  s390/setup: fix DMA_API_DEBUG warnings
  s390/zcrypt: remove obsolete __constant
  s390/keyboard: avoid off-by-one when using strnlen_user()
  s390/sclp: pass timeout as HZ independent value
  s390/mm: s/specifiation/specification/, s/an specification/a specification/
  s390/sclp: Use DECLARE_BITMAP
  s390/dasd: Enable automatic loading of dasd_diag_mod
  s390/sclp: move sclp_facilities into "struct sclp"
  s390/sclp: get rid of sclp_get_mtid() and sclp_get_mtid_max()
  s390/sclp: unify basic sclp access by exposing "struct sclp"
  s390/sclp: prepare smp_fill_possible_mask for global "struct sclp"

Pull Microblaze updates from Michal Simek:

 - some PCI fixups

 - add new MB versions

 - sparse fixups

* tag 'microblaze-4.2-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze/PCI: Remove unnecessary struct pci_dev declaration
  microblaze/PCI: Remove unnecessary pci_bus_find_capability() declaration
  microblaze/PCI: Remove unused declarations
  microblaze: Label local function static
  microblaze: Add missing release version code

Pull IOMMU updates from Joerg Roedel:
 "This time with bigger changes than usual:

   - A new IOMMU driver for the ARM SMMUv3.

     This IOMMU is pretty different from SMMUv1 and v2 in that it is
     configured through in-memory structures and not through the MMIO
     register region.  The ARM SMMUv3 also supports IO demand paging for
     PCI devices with PRI/PASID capabilities, but this is not
     implemented in the driver yet.

   - Lots of cleanups and device-tree support for the Exynos IOMMU
     driver.  This is part of the effort to bring Exynos DRM support
     upstream.

   - Introduction of default domains into the IOMMU core code.

     The rationale behind this is to move functionalily out of the IOMMU
     drivers to common code to get to a unified behavior between
     different drivers.  The patches here introduce a default domain for
     iommu-groups (isolation groups).

     A device will now always be attached to a domain, either the
     default domain or another domain handled by the device driver.  The
     IOMMU drivers have to be modified to make use of that feature.  So
     long the AMD IOMMU driver is converted, with others to follow.

   - Patches for the Intel VT-d drvier to fix DMAR faults that happen
     when a kdump kernel boots.

     When the kdump kernel boots it re-initializes the IOMMU hardware,
     which destroys all mappings from the crashed kernel.  As this
     happens before the endpoint devices are re-initialized, any
     in-flight DMA causes a DMAR fault.  These faults cause PCI master
     aborts, which some devices can't handle properly and go into an
     undefined state, so that the device driver in the kdump kernel
     fails to initialize them and the dump fails.

     This is now fixed by copying over the mapping structures (only
     context tables and interrupt remapping tables) from the old kernel
     and keep the old mappings in place until the device driver of the
     new kernel takes over.  This emulates the the behavior without an
     IOMMU to the best degree possible.

   - A couple of other small fixes and cleanups"

* tag 'iommu-updates-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (69 commits)
  iommu/amd: Handle large pages correctly in free_pagetable
  iommu/vt-d: Don't disable IR when it was previously enabled
  iommu/vt-d: Make sure copied over IR entries are not reused
  iommu/vt-d: Copy IR table from old kernel when in kdump mode
  iommu/vt-d: Set IRTA in intel_setup_irq_remapping
  iommu/vt-d: Disable IRQ remapping in intel_prepare_irq_remapping
  iommu/vt-d: Move QI initializationt to intel_setup_irq_remapping
  iommu/vt-d: Move EIM detection to intel_prepare_irq_remapping
  iommu/vt-d: Enable Translation only if it was previously disabled
  iommu/vt-d: Don't disable translation prior to OS handover
  iommu/vt-d: Don't copy translation tables if RTT bit needs to be changed
  iommu/vt-d: Don't do early domain assignment if kdump kernel
  iommu/vt-d: Allocate si_domain in init_dmars()
  iommu/vt-d: Mark copied context entries
  iommu/vt-d: Do not re-use domain-ids from the old kernel
  iommu/vt-d: Copy translation tables from old kernel
  iommu/vt-d: Detect pre enabled translation
  iommu/vt-d: Make root entry visible for hardware right after allocation
  iommu/vt-d: Init QI before root entry is allocated
  iommu/vt-d: Cleanup log messages
  ...

Pull MTD updates from Brian Norris:
 "JFFS2:
   - fix a theoretical unbalanced locking issue; the lock handling was a
     bit unclean, but AFAICT, it didn't actually lead to real deadlocks

  NAND:
   - brcmnand driver: new driver supporting NAND controller found
     originally on Broadcom STB SoCs (BCM7xxx), but now also found on
     BCM63xxx, iProc (e.g., Cygnus, BCM5301x), BCM3xxx, and more

   - begin factoring out BBT code so it can be shared between
     traditional (parallel) NAND drivers and upcoming SPI NAND drivers
     (WIP)

   - add common DT-based init support, so nand_base can pick up some
     flash properties automatically, using established common NAND DT
     properties

   - mxc_nand: support 8-bit ECC

   - pxa3xx_nand:
     * fix build for ARM64
     * use a jiffies-based timeout

  SPI NOR:
   - add a few new IDs

   - clear out some unnecessary entries

   - make sure SECT_4K flags are correct for all (?) entries

  Core:
   - fix mtd->usecount race conditions (BUG_ON())

   - switch to modern PM ops

  Other:
   - CFI: save code space by de-inlining large functions

   - clean up some partition parser selection code across several
     drivers

   - various miscellaneous changes, mostly minor"

* tag 'for-linus-20150623' of git://git.infradead.org/linux-mtd: (57 commits)
  mtd: docg3: Fix kasprintf() usage
  mtd: docg3: Don't leak docg3->bbt in error path
  mtd: nandsim: Fix kasprintf() usage
  mtd: cs553x_nand: Fix kasprintf() usage
  mtd: r852: Fix device_create_file() usage
  mtd: brcmnand: drop unnecessary initialization
  mtd: propagate error codes from add_mtd_device()
  mtd: diskonchip: remove two-phase partitioning / registration
  mtd: dc21285: use raw spinlock functions for nw_gpio_lock
  mtd: chips: fixup dependencies, to prevent build error
  mtd: cfi_cmdset_0002: Initialize datum before calling map_word_load_partial
  mtd: cfi: deinline large functions
  mtd: lantiq-flash: use default partition parsers
  mtd: plat_nand: use default partition probe
  mtd: nand: correct indentation within conditional
  mtd: remove incorrect file name
  mtd: blktrans: use better error code for unimplemented ioctl()
  mtd: maps: Spelling s/reseved/reserved/
  mtd: blktrans: change blktrans_getgeo return value
  mtd: mxc_nand: generate nand_ecclayout for 8 bit ECC
  ...

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - Constify structures; throughout the subsystem
   - Move support to DT in; cros_ec
   - DT changes and documentation; cros-ec, max77693, max77686, arizona, da9063
   - ACPI changes and documentation; mfd-core
   - Use different platform specific API in; cros_ec_*, arizona-core
   - Remove unused parent field from; cros_ec_i2c
   - Add wake-up/reset delay in; cross_ec_spi, arizona-core
   - Staticise structures/functions in; cros_ec
   - Remove redundant code; arizona-core, max77686
   - Bugfix; twl4030-power
   - Allow compile test; aat2870, tps65910
   - MAINTAINERS adaptions; samsung, syscon
   - Resource Management (devm_*); arizona-core
   - Refactor Reset code; arizona-core
   - Insist on at least one full boot; arizona-core
   - Trivial formatting; arizona-core
   - Add low-power-sleep; arizona-core
   - IRQ ONESHOT changes; twl4030-irq, mc13xxx-core, wm831x-auxadc, htc-i2cpld,
                          wm8350-core, ab8500-debugfs, ab8500-gpadc, si476x-i2c

  (Re-)moved drivers:
   - Move protocol helpers out to drivers/platform; cros_ec

  New drivers/supported devices:
   - Add support for AXP22x into axp20x
   - Add support for OnKey into da9063-core
   - Add support for Pinctrl into mt6397-core
   - New STMicroelectronics LPC Watchdog driver
   - New STMicroelectronics LPC Real-Time Clock driver"

* tag 'mfd-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (59 commits)
  mfd: lpc_ich: Assign subdevice ids automatically
  mfd: si476x-i2c: Pass the IRQF_ONESHOT flag
  mfd: ab8500-gpadc: Pass the IRQF_ONESHOT flag
  mfd: ab8500-debugfs: Pass the IRQF_ONESHOT flag
  mfd: wm8350-core: Pass the IRQF_ONESHOT flag
  mfd: htc-i2cpld: Pass the IRQF_ONESHOT flag
  mfd: wm831x-auxadc: Pass the IRQF_ONESHOT flag
  mfd: mc13xxx-core: Pass the IRQF_ONESHOT flag
  mfd: twl4030-irq: Pass the IRQF_ONESHOT flag
  mfd: mt6397-core: Add GPIO sub-module support
  mfd: arizona: Add convience defines for micd_rate/micd_bias_starttime
  mfd: dt: Add bindings for DA9063 OnKey
  mfd: da9063: Add support for OnKey driver
  mfd: arizona: Fix incorrect Makefile conditionals
  mfd: arizona: Add stub for wm5102_patch()
  mfd: Check ACPI device companion before checking resources
  Documentation: Add WM8998/WM1814 device tree bindings
  mfd: arizona: Split INx_MODE into two fields
  mfd: wm5110: Add delay before releasing reset line
  mfd: arizona: Add better support for system suspend
  ...

Pull regulator updates from Mark Brown:
 "Another fairly quiet release, some new drivers with generic handling
  for minor features but nothing that makes a substantial difference
  outside of the subsystem or for most boards:

   - support for a bunch of new parameters which are present on enough
     regulators to be worth having generic handling for in the
     framework.

   - fixes for some issues with printing constraints during boot which
     should probably have gone in for v4.1 but didn't.

   - new drivers for Dialog DA9062, Maxim MAX77621 and Qualcomm SPMI
     regulators"

* tag 'regulator-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
  regulator: qcom_spmi: Fix calculating number of voltages
  regulator: qcom_spmi: Add missing braces for aligned code
  regulator: fix simple_return.cocci warnings
  regulator: Add QCOM SPMI regulator driver
  regulator: Add docbook for soft start
  regulator: Add input current limit support
  regulator: Add soft start support
  regulator: Add pull down support
  regulator: Add system_load constraint
  regulator: max8973: Fix up ramp_delay for MAX8973_RAMP_25mV_PER_US case
  regulator: core: replace sprintf with scnprintf
  regulator: core: fix constraints output buffer
  regulator: core: Don't corrupt display when printing uV offsets
  regulator: max8973: add support for MAX77621
  regulator: max8973: configure ramp delay through callback
  regulator: pwm-regulator: Diffientiate between dev (device) and rdev (regulator_dev)
  regulator: pwm-regulator: Remove superfluous is_enabled check
  regulator: pwm-regulator: Remove unnecessary descriptor attribute from ddata
  regulator: core: Don't spew backtraces on duplicate sysfs
  regulator: da9063: Fix up irq leak
  ...

Pull spi updates from Mark Brown:
 "No framework updates for the SPI API this time around aside from one
  small fix, just driver improvments.  Some highlights include:

   - New driver support for CSR USP, Mikrotik RB4xx and Zynq GQSPI
     controllers.

   - Modernisation of the OMAP McSPI controller driver, moving it to
     current APIs to enable support for a wider range of client drivers.

   - DMA support for the bcm2835 controller"

* tag 'spi-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (60 commits)
  spi: zynq: Remove execute bit
  spi: atmel: add support to FIFOs
  spi: atmel: update DT bindings documentation
  spi: spi-fsl-dspi: Update DT binding documentation
  spi: pxa2xx: Constify ACPI device ids
  spi: Add support for Zynq Ultrascale+ MPSoC GQSPI controller
  spi: zynq: Add DT bindings documentation for Zynq Ultrascale+ MPSoC GQSPI controller
  spi: fsl-dspi: Use pinctrl PM helpers
  spi: davinci: change the lower limit of pre-scale divider to 1
  spi: spi-fsl-dspi: Change the way of increasing spi_message->actual_length
  spi: spi-fsl-dspi: Enable TCF interrupt mode support
  spi: atmel: add support for the internal chip-select of the spi controller
  spi: spi-pxa2xx: remove legacy PXA DMA bits
  spi: pxa2xx: Make LPSS SPI general register optional
  spi: pxa2xx: Prepare for new Intel LPSS SPI type
  spi: pxa2xx: Differentiate Intel LPSS types
  spi: restore rx/tx_buf in case of unset CONFIG_HAS_DMA
  spi: rspi: Re-do the returning value of qspi_transfer_out_in
  spi: rspi: modify the name of "qspi_trigger_transfer_out_int" function
  spi: orion: Fix extended baud rates for each Armada SoCs
  ...

Pull regmap updates from Mark Brown:
 "As well as a few fixes and updates for API changes there's two new
  features for the API:

   - Better support for handling a reset of the underlying hardware,
     marking the register map as needing a resync to the device when we
     need to do that automatically

   - Support for querying the size and stride of the register map,
     allowing higher level frameworks to configure themselves more
     readily"

* tag 'regmap-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix possible shift overflow in regmap_field_init()
  regmap: Fix regmap_bulk_read in BE mode
  regmap: kill off set_irq_flags usage
  regmap: irq: Fixed a typo error
  regmap: drop unneeded goto
  regmap: Introduce regmap_get_reg_stride
  regmap: Introduce regmap_get_max_register
  regmap: Use regcache_mark_dirty() to indicate power loss or reset
  regmap: Add a helper function for regcache sync test
  regmap: Constify irq_domain_ops

Pull fbdev updates from Tomi Valkeinen:

 - ssd1307fb: various fixes and improvements, SSD1305 support

 - use architecture agnostic functions instead of MTRR functions in
   various fbdev drivers

 - TI DRA7xx SoC display support (arch/arm/ side)

 - OMAPDSS componentization to fix probing order issues

 - OMAPDSS scaling fixes

 - msm_fb: remove obsoleted driver

* tag 'fbdev-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (77 commits)
  msm: msm_fb: Remove dead code
  OMAPDSS: HDMI: wait for framedone when stopping video
  OMAPDSS: HDMI4: fix error handling
  OMAPDSS: DISPC: scaler debug print
  OMAPDSS: DISPC: do only y decimation on OMAP3
  OMAPDSS: DISPC: check if scaling setup failed
  OMAPDSS: DISPC: fix 64 bit issue in 5-tap
  OMAPDSS: DISPC: fix row_inc for OMAP3
  OMAPDSS: DISPC: add check for scaling limits
  OMAPDSS: DISPC: fix check_horiz_timing_omap3 args
  OMAPDSS: DISPC: fix predecimation for YUV modes
  OMAPDSS: DISPC: work-around for errata i631
  OMAPDSS: simplify submodule reg/unreg code
  OMAPDSS: componentize omapdss
  OMAPDSS: reorder uninit calls
  OMAPDSS: remove uses of __init/__exit
  OMAPDSS: fix dss_init_ports error handling
  OMAPDSS: refactor dss probe function
  OMAPDSS: move 'dss_initialized' to dss driver
  fbdev: propagate result of fb_videomode_from_videomode()
  ...

Pull power supply and reset updates from Sebastian Reichel:

 - new charger drivers: BQ24257, BQ25890, AXP288, RT9455

 - MAX17042 battery: add health & temperature support

 - BQ2415x charger: add ACPI support

 - misc fixes and cleanups

* tag 'for-4.2' of git://git.infradead.org/battery-2.6: (32 commits)
  power_supply: Correct kerneldoc copy paste errors
  wm831x_power: Fix off-by-one at free_irq()
  power_supply: rt9455_charger: Fix error reported by static analysis tool
  power_supply: bq24257: use flags argument of devm_gpiod_get
  power_supply: bq25890: use flags argument of devm_gpiod_get
  sbs-battery: add option to always register battery
  power: Add devm_power_supply_get_by_phandle() helper function
  power_supply: max17042: Add OF support for setting thresholds
  power_supply: sysfs: Bring back write to writeable properties
  power_supply: rt9455_charger: Check if CONFIG_USB_PHY is enabled
  power: reset: gpio-restart: increase priority slightly
  power_supply: bq25890: make chip_id int
  power_supply: Add support for Richtek RT9455 battery charger
  Documentation: devicetree: Add Richtek RT9455 bindings
  of: Add vendor prefix for Richtek Technology Corporation
  power_supply: 88pm860x_charger: Do not call free_irq() twice
  power: bq24190_charger: Change first_time flag reset condition
  power: axp288_charger: axp288 charger driver
  power: max17042_battery: add HEALTH and TEMP_* properties support
  power_supply: Add support for TI BQ25890 charger chip
  ...

Pull HSI updates from Sebastian Reichel:
 "Misc fixes"

* tag 'hsi-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: nokia-modem: use flags argument of devm_gpiod_get to set direction
  HSI: nokia-modem: Reduce missing driver message to debug level
  HSI: cmt_speech: fix timestamp interface

Pull SCSI updates from James Bottomley:
 "This is the usual grab bag of driver updates (lpfc, hpsa,
  megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates.

  There is also one new driver: the Cisco snic.  The advansys driver has
  been rewritten to get rid of the warning about converting it to the
  DMA API, the tape statistics patch got in and finally, there's a
  resuffle of SCSI header files to separate more cleanly initiator from
  target mode (and better share the common definitions)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (156 commits)
  snic: driver for Cisco SCSI HBA
  qla2xxx: Fix indentation
  qla2xxx: Comment out unreachable code
  fusion: remove dead MTRR code
  advansys: fix compilation errors and warnings when CONFIG_PCI is not set
  mptsas: fix depth param in scsi_track_queue_full
  megaraid: fix irq setup process regression
  lpfc: Update version to 10.7.0.0 for upstream patch set.
  lpfc: Fix to drop PLOGIs from fabric node till LOGO processing completes
  lpfc: Fix scsi task management error message.
  lpfc: Fix cq_id masking problem.
  lpfc: Fix scsi prep dma buf error.
  lpfc: Add support for using block multi-queue
  lpfc: Devices are not discovered during takeaway/giveback testing
  lpfc: Fix vport deletion failure.
  lpfc: Check for active portpeerbeacon.
  lpfc: Update driver version for upstream patch set 10.6.0.1.
  lpfc: Change buffer pool empty message to miscellaneous category
  lpfc: Fix incorrect log message reported for empty FCF record.
  lpfc: Fix rport leak.
  ...

Pull rdma updates from Doug Ledford:

 - a large cleanup of how device capabilities are checked for various
   features

 - additional cleanups in the MAD processing

 - update to the srp driver

 - creation and use of centralized log message helpers

 - add const to a number of args to calls and clean up call chain

 - add support for extended cq create verb

 - add support for timestamps on cq completion

 - add support for processing OPA MAD packets

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (92 commits)
  IB/mad: Add final OPA MAD processing
  IB/mad: Add partial Intel OPA MAD support
  IB/mad: Add partial Intel OPA MAD support
  IB/core: Add OPA MAD core capability flag
  IB/mad: Add support for additional MAD info to/from drivers
  IB/mad: Convert allocations from kmem_cache to kzalloc
  IB/core: Add ability for drivers to report an alternate MAD size.
  IB/mad: Support alternate Base Versions when creating MADs
  IB/mad: Create a generic helper for DR forwarding checks
  IB/mad: Create a generic helper for DR SMP Recv processing
  IB/mad: Create a generic helper for DR SMP Send processing
  IB/mad: Split IB SMI handling from MAD Recv handler
  IB/mad cleanup: Generalize processing of MAD data
  IB/mad cleanup: Clean up function params -- find_mad_agent
  IB/mlx4: Add support for CQ time-stamping
  IB/mlx4: Add mmap call to map the hardware clock
  IB/core: Pass hardware specific data in query_device
  IB/core: Add timestamp_mask and hca_core_clock to query_device
  IB/core: Extend ib_uverbs_create_cq
  IB/core: Add CQ creation time-stamping flag
  ...

Pull clkdev updates from Russell King:
 "This series addresses some breakage in clkdev caused by a previous
  patch set from the clk tree which introduced per-user clk structures.
  This basically renamed the existing 'struct clk' to 'struct clk_hw',
  and introduced a new 'struct clk'.

  This change will break anyone using clk_add_alias() with the common
  clk code enabled.  Thankfully, the intersection of users of
  clk_add_alias() and those using the common clk code is practically
  zero, but this is something which should be fixed to keep the code
  sane.

  The problem is that clk_add_alias() does this:

        r = clk_get(...);
        l = clkdev_alloc(r, ...);
        clk_put(...);

  which causes the alias to store a pointer to 'r', which has been
  freed.

  The original patch set tried to work around this problem incorrectly -
  at clk_get() time, it tried to convert the struct clk to a struct
  clk_hw, and then creating a new struct clk from that.  Clearly, if the
  original struct clk has been freed, then we have a use-after-free bug.

  We have other places in the tree which do something similar, so this
  series also addresses those locations too.

  This series addresses this problem by converting clkdev to store and
  use the clk_hw pointer.  This allows clk_get() to only have to create
  it's per-user struct clk from the clk_hw.  We can also get to the
  desired clk_hw at clk_add_alias() or clk lookup creation time, when
  the struct clk is "alive".

  We also perform some cleanups of the code:

   - replacing looped calls to clkdev_add() with clkdev_add_table()

   - replacing open-coded lookup allocation (which should have been
     using clkdev_alloc()) and subsequent clkdev_add() with
     clkdev_create()

   - replacing open-coded clk_add_alias() with clk_add_alias()"

* 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  clk: s2mps11: use clkdev_create()
  ASoC: migor: use clkdev_create()
  ARM: omap2: use clkdev_add_alias()
  ARM: omap2: use clkdev_create()
  ARM: orion: use clkdev_create()
  ARM: lpc32xx: convert to use clkdev_add_table()
  SH: use clkdev_add_table()
  clkdev: add clkdev_create() helper
  clkdev: const-ify connection id to clk_add_alias()
  clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h
  clkdev: drop __init from clkdev_add_table()
  clk: update clk API documentation to clarify clk_round_rate()
  clkdev: use clk_hw internally

Pull power management and ACPI updates from Rafael Wysocki:
 "The rework of backlight interface selection API from Hans de Goede
  stands out from the number of commits and the number of affected
  places perspective.  The cpufreq core fixes from Viresh Kumar are
  quite significant too as far as the number of commits goes and because
  they should reduce CPU online/offline overhead quite a bit in the
  majority of cases.

  From the new featues point of view, the ACPICA update (to upstream
  revision 20150515) adding support for new ACPI 6 material to ACPICA is
  the one that matters the most as some new significant features will be
  based on it going forward.  Also included is an update of the ACPI
  device power management core to follow ACPI 6 (which in turn reflects
  the Windows' device PM implementation), a PM core extension to support
  wakeup interrupts in a more generic way and support for the ACPI _CCA
  device configuration object.

  The rest is mostly fixes and cleanups all over and some documentation
  updates, including new DT bindings for Operating Performance Points.

  There is one fix for a regression introduced in the 4.1 cycle, but it
  adds quite a number of lines of code, it wasn't really ready before
  Thursday and you were on vacation, so I refrained from pushing it on
  the last minute for 4.1.

  Specifics:

   - ACPICA update to upstream revision 20150515 including basic support
     for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
     XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
     FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
     _MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
     Lv Zheng).

   - ACPI device power management core code update to follow ACPI 6
     which reflects the ACPI device power management implementation in
     Windows (Rafael J Wysocki).

   - rework of the backlight interface selection logic to reduce the
     number of kernel command line options and improve the handling of
     DMI quirks that may be involved in that and to make the code
     generally more straightforward (Hans de Goede).

   - fixes for the ACPI Embedded Controller (EC) driver related to the
     handling of EC transactions (Lv Zheng).

   - fix for a regression related to the ACPI resources management and
     resulting from a recent change of ACPI initialization code ordering
     (Rafael J Wysocki).

   - fix for a system initialization regression related to ACPI
     introduced during the 3.14 cycle and caused by running the code
     that switches the platform over to the ACPI mode too early in the
     initialization sequence (Rafael J Wysocki).

   - support for the ACPI _CCA device configuration object related to
     DMA cache coherence (Suravee Suthikulpanit).

   - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).

   - ACPI battery driver cleanups (Luis Henriques, Mathias Krause).

   - ACPI processor driver cleanups (Hanjun Guo).

   - cleanups and documentation update related to the ACPI device
     properties interface based on _DSD (Rafael J Wysocki).

   - ACPI device power management fixes (Rafael J Wysocki).

   - assorted cleanups related to ACPI (Dominik Brodowski, Fabian
     Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).

   - fix for a long-standing issue causing General Protection Faults to
     be generated occasionally on return to user space after resume from
     ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).

   - fix to make the suspend core code return -EBUSY consistently in all
     cases when system suspend is aborted due to wakeup detection (Ruchi
     Kandoi).

   - support for automated device wakeup IRQ handling allowing drivers
     to make their PM support more starightforward (Tony Lindgren).

   - new tracepoints for suspend-to-idle tracing and rework of the
     prepare/complete callbacks tracing in the PM core (Todd E Brandt,
     Rafael J Wysocki).

   - wakeup sources framework enhancements (Jin Qian).

   - new macro for noirq system PM callbacks (Grygorii Strashko).

   - assorted cleanups related to system suspend (Rafael J Wysocki).

   - cpuidle core cleanups to make the code more efficient (Rafael J
     Wysocki).

   - powernv/pseries cpuidle driver update (Shilpasri G Bhat).

   - cpufreq core fixes related to CPU online/offline that should reduce
     the overhead of these operations quite a bit, unless the CPU in
     question is physically going away (Viresh Kumar, Saravana Kannan).

   - serialization of cpufreq governor callbacks to avoid race
     conditions in some cases (Viresh Kumar).

   - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
     Bhargava, Joe Konno).

   - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
     Holla, Felipe Balbi, Tang Yuantian).

   - assorted cleanups in cpufreq drivers and core (Shailendra Verma,
     Fabian Frederick, Wang Long).

   - new Device Tree bindings for representing Operating Performance
     Points (Viresh Kumar).

   - updates for the common clock operations support code in the PM core
     (Rajendra Nayak, Geert Uytterhoeven).

   - PM domains core code update (Geert Uytterhoeven).

   - Intel Knights Landing support for the RAPL (Running Average Power
     Limit) power capping driver (Dasaratharaman Chandramouli).

   - fixes related to the floor frequency setting on Atom SoCs in the
     RAPL power capping driver (Ajay Thomas).

   - runtime PM framework documentation update (Ben Dooks).

   - cpupower tool fix (Herton R Krzesinski)"

* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
  cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
  x86: Load __USER_DS into DS/ES after resume
  PM / OPP: Add binding for 'opp-suspend'
  PM / OPP: Allow multiple OPP tables to be passed via DT
  PM / OPP: Add new bindings to address shortcomings of existing bindings
  ACPI: Constify ACPI device IDs in documentation
  ACPI / enumeration: Document the rules regarding the PRP0001 device ID
  ACPI / video: Make acpi_video_unregister_backlight() private
  acpi-video-detect: Remove old API
  toshiba-acpi: Port to new backlight interface selection API
  thinkpad-acpi: Port to new backlight interface selection API
  sony-laptop: Port to new backlight interface selection API
  samsung-laptop: Port to new backlight interface selection API
  msi-wmi: Port to new backlight interface selection API
  msi-laptop: Port to new backlight interface selection API
  intel-oaktrail: Port to new backlight interface selection API
  ideapad-laptop: Port to new backlight interface selection API
  fujitsu-laptop: Port to new backlight interface selection API
  eeepc-laptop: Port to new backlight interface selection API
  dell-wmi: Port to new backlight interface selection API
  ...

Pull trivial tree updates from Jiri Kosina:
 "As usual, mostly comment, kerneldoc and printk() fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  lpfc: Grammar s/an negative/a negative/
  ARM: lib/lib1funcs.S: fix typo s/substractions/subtractions/
  cx25821: cx25821-medusa-reg.h: fix 0x0x prefix
  lib: crc-itu-t.[ch] fix 0x0x prefix in integer constants
  rapidio: Fix kerneldoc and comment
  qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config()
  treewide: Kconfig: fix wording / spelling
  usb/serial: fix grammar in Kconfig help text for FTDI_SIO
  megaraid_sas: fix kerneldoc
  netfilter: ebtables: fix comment grammar
  drm/radeon: fix comment
  isdn: fix grammar in comment
  ARM: KVM: fix comment

Pull livepatching fixes from Jiri Kosina:

 - symbol lookup locking fix, from Miroslav Benes

 - error handling improvements in case of failure of the module coming
   notifier, from Minfei Huang

 - we were too pessimistic when kASLR has been enabled on x86 and were
   dropping address hints on the floor unnecessarily in such case.  Fix
   from Jiri Kosina

 - a few other small fixes and cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: add module locking around kallsyms calls
  livepatch: annotate klp_init() with __init
  livepatch: introduce patch/func-walking helpers
  livepatch: make kobject in klp_object statically allocated
  livepatch: Prevent patch inconsistencies if the coming module notifier fails
  livepatch: match return value to function signature
  x86: kaslr: fix build due to missing ALIGN definition
  livepatch: x86: make kASLR logic more accurate
  x86: introduce kaslr_offset()

Pull HID updates from Jiri Kosina:

 - spurious power/wakeup sysfs files removal for I2C-HID devices, from
   Andrew Duggan

 - Logitech M560 support, from Goffredo Baroncelli

 - a lot of housekeeping cleanups to hid-lg4ff driver, from Michal Maly

 - improved support for Plantronics devices, from Terry Junge

 - Sony Motion Controller and Navigation Controller support and
   subsequent cleanups of hid-sony driver, from Frank Praznik and Simon
   Wood

 - HW support improvements to the Wacom driver, from Jason Gerecke and
   Ping Cheng

 - assorted small cleanups and device ID additions all over the place

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (69 commits)
  HID: cypress: use swap() in cp_report_fixup()
  HID: microsoft: Add Surface Power Cover
  HID: hid-sony: Fix report descriptor for Navigation Controller
  HID: hid-sony: Navigation controller only has 1 LED and no rumble
  HID: hid-sony: Add BT support for Navigation Controller
  HID: wacom: Introduce new 'touch_input' device
  HID: wacom: Split apart 'wacom_setup_pentouch_input_capabilites'
  HID: wacom: Introduce a new WACOM_DEVICETYPE_PAD device_type
  HID: wacom: Treat features->device_type values as flags
  HID: wacom: Simplify 'wacom_update_name'
  HID: rmi: Disable populating F30 when the touchpad has physical buttons
  HID: plantronics: Update to map volume up/down controls
  HID: sony: PS Move fix report descriptor
  HID: sony: PS3 Move enable LEDs and Rumble via BT
  HID: sony: Add support PS3 Move Battery via BT
  HID: sony: Add quirk for MOTION_CONTROLLER_BT
  HID: sony: Support PS3 Move Controller when connected via Bluetooth
  HID: i2c-hid: Do not set the ACPI companion field in the HID device
  usb, HID: Remove Vernier devices from lsusb and hid_ignore_list
  HID: hidpp: Add driver for mouse logitech M560
  ...

Pull PCMCIA update from Dominik Brodowski:
 "A few PCMCIA fixes and cleanups are available in the PCMCIA tree.

  Most of them are trivial and self-explanatory.  Of particular note are
  the last three patches which add an important hardware quirk for
  Toshiba ToPIC95 sockets (or BIOS breakage on systems with these
  sockets), fix resource leaks in yenta_socket enable/disable call
  paths, and fix a regression caused by patch 1c6c9b1d since v4.0.

  Alan stated he is OK with me pushing this patch upstream.  Once it
  works out well in your tree, I will push it to stable for 4.0/4.1 as
  well"

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia:
  pcmcia: do not break rsrc_nonstatic when handling anonymous cards
  pcmcia: Fix resource leaks in yenta_probe() and _close()
  Disable write buffering on Toshiba ToPIC95
  pcmcia: Convert dev_printk to dev_<level>
  pcmcia/vrc4171: Remove typedefs for enums and struct
  pcmcia: Remove typedef in structs and emum
  pcmcia: Remove typedef tuple_flags
  drivers: pcmcia: electra_cf.c fix checkpatch error and warnings
  drivers: pcmcia: ds.c fix checkpatch errors
  PCMCIA: Remove commented references to dead class_device_create_file()
  drivers/pcmcia/electra_cf.c: add missing iounmap and kfree
  pcmcia: replace open-coded ARRAY_SIZE with macro

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v4.2 merge window:

  Enumeration
    - Move pci_ari_enabled() to global header (Alex Williamson)
    - Account for ARI in _PRT lookups (Alex Williamson)
    - Remove unused pci_scan_bus_parented() (Yijing Wang)

  Resource management
    - Use host bridge _CRS info on systems with >32 bit addressing (Bjorn Helgaas)
    - Use host bridge _CRS info on Foxconn K8M890-8237A (Bjorn Helgaas)
    - Fix pci_address_to_pio() conversion of CPU address to I/O port (Zhichang Yuan)
    - Add pci_bus_addr_t (Yinghai Lu)

  PCI device hotplug
    - Wait for pciehp command completion where necessary (Alex Williamson)
    - Drop pointless ACPI-based "slot detection" check (Rafael J. Wysocki)
    - Check ignore_hotplug for all downstream devices (Rafael J. Wysocki)
    - Propagate the "ignore hotplug" setting to parent (Rafael J. Wysocki)
    - Inline pciehp "handle event" functions into the ISR (Bjorn Helgaas)
    - Clean up pciehp debug logging (Bjorn Helgaas)

  Power management
    - Remove redundant PCIe port type checking (Yijing Wang)
    - Add dev->has_secondary_link to track downstream PCIe links (Yijing Wang)
    - Use dev->has_secondary_link to find downstream links for ASPM (Yijing Wang)
    - Drop __pci_disable_link_state() useless "force" parameter (Bjorn Helgaas)
    - Simplify Clock Power Management setting (Bjorn Helgaas)

  Virtualization
    - Add ACS quirks for Intel 9-series PCH root ports (Alex Williamson)
    - Add function 1 DMA alias quirk for Marvell 9120 (Sakari Ailus)

  MSI
    - Disable MSI at enumeration even if kernel doesn't support MSI (Michael S. Tsirkin)
    - Remove unused pci_msi_off() (Bjorn Helgaas)
    - Rename msi_set_enable(), msix_clear_and_set_ctrl() (Michael S.  Tsirkin)
    - Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() (Michael S. Tsirkin)
    - Drop pci_msi_off() calls during probe (Michael S. Tsirkin)

  APM X-Gene host bridge driver
    - Add APM X-Gene v1 PCIe MSI/MSIX termination driver (Duc Dang)
    - Add APM X-Gene PCIe MSI DTS nodes (Duc Dang)
    - Disable Configuration Request Retry Status for v1 silicon (Duc Dang)
    - Allow config access to Root Port even when link is down (Duc Dang)

  Broadcom iProc host bridge driver
    - Allow override of device tree IRQ mapping function (Hauke Mehrtens)
    - Add BCMA PCIe driver (Hauke Mehrtens)
    - Directly add PCI resources (Hauke Mehrtens)
    - Free resource list after registration (Hauke Mehrtens)

  Freescale i.MX6 host bridge driver
    - Add speed change timeout message (Troy Kisky)
    - Rename imx6_pcie_start_link() to imx6_pcie_establish_link() (Bjorn Helgaas)

  Freescale Layerscape host bridge driver
    - Use dw_pcie_link_up() consistently (Bjorn Helgaas)
    - Factor out ls_pcie_establish_link() (Bjorn Helgaas)

  Marvell MVEBU host bridge driver
    - Remove mvebu_pcie_scan_bus() (Yijing Wang)

  NVIDIA Tegra host bridge driver
    - Remove tegra_pcie_scan_bus() (Yijing Wang)

  Synopsys DesignWare host bridge driver
    - Consolidate outbound iATU programming functions (Jisheng Zhang)
    - Use iATU0 for cfg and IO, iATU1 for MEM (Jisheng Zhang)
    - Add support for x8 links (Zhou Wang)
    - Wait for link to come up with consistent style (Bjorn Helgaas)
    - Use pci_scan_root_bus() for simplicity (Yijing Wang)

  TI DRA7xx host bridge driver
    - Use dw_pcie_link_up() consistently (Bjorn Helgaas)

  Miscellaneous
    - Include <linux/pci.h>, not <asm/pci.h> (Bjorn Helgaas)
    - Remove unnecessary #includes of <asm/pci.h> (Bjorn Helgaas)
    - Remove unused pcibios_select_root() (again) (Bjorn Helgaas)
    - Remove unused pci_dma_burst_advice() (Bjorn Helgaas)
    - xen/pcifront: Don't use deprecated function pci_scan_bus_parented() (Arnd Bergmann)"

* tag 'pci-v4.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
  PCI: pciehp: Inline the "handle event" functions into the ISR
  PCI: pciehp: Rename queue_interrupt_event() to pciehp_queue_interrupt_event()
  PCI: pciehp: Make queue_interrupt_event() void
  PCI: xgene: Allow config access to Root Port even when link is down
  PCI: xgene: Disable Configuration Request Retry Status for v1 silicon
  PCI: pciehp: Clean up debug logging
  x86/PCI: Use host bridge _CRS info on systems with >32 bit addressing
  PCI: imx6: Add #define PCIE_RC_LCSR
  PCI: imx6: Use "u32", not "uint32_t"
  PCI: Remove unused pci_scan_bus_parented()
  xen/pcifront: Don't use deprecated function pci_scan_bus_parented()
  PCI: imx6: Add speed change timeout message
  PCI/ASPM: Simplify Clock Power Management setting
  PCI: designware: Wait for link to come up with consistent style
  PCI: layerscape: Factor out ls_pcie_establish_link()
  PCI: layerscape: Use dw_pcie_link_up() consistently
  PCI: dra7xx: Use dw_pcie_link_up() consistently
  x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A
  PCI: pciehp: Wait for hotplug command completion where necessary
  PCI: Remove unused pci_dma_burst_advice()
  ...

Merge tag 'hwmon-for-linus-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - new driver for Microchip TC74

 - support for ncpXXwf104 added to ntc_thermistor driver

 - minor cleanup

* tag 'hwmon-for-linus-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: add driver for Microchip TC74
  hwmon: (ntc_thermistor) Improve precision of resistance calculation
  hwmon: (ntc_thermistor) fix iio raw to microvolts conversion
  hwmon: (atxp1) Drop auto-detection
  hwmon: (atxp1) Drop FSF mailing address
  hwmon: Allow compile test of GPIO consumers if !GPIOLIB
  hwmon: (sht15) Constify platform_device_id
  hwmon: (max197) Constify platform_device_id
  hwmon: (ntc_thermistor) Add support for ncpXXwf104

Pull MMC updates from Ulf Hansson:
 "Here are the changes for MMC for v4.2.

  MMC core:
   - Fix an error path in the mmc block layer
   - Fix PM domain attachment for the SDIO bus
   - Add support for driver strength selection
   - Increase a delay to let voltage stabilize
   - Add support for disabling write-protect detection
   - Add facility to support re-tuning
   - Re-tune and retry in the recovery path
   - Add reset option for SDIO
   - Consolidations and clean-ups

  MMC host:
   - Add Mediatek MMC driver
   - Constify platform_device_id for a couple of hosts
   - Fix modalias to make module auto-loading work for a couple of hosts
   - sdhci: Add support for sdhci-arasan4.9a
   - sdhci: Fix low memory corruption
   - sdhci: Restore behavior while creating OCR mask
   - sdhci: Add a callback to select drive strength
   - sdhci: Fix driver type B and D handling
   - sdhci: Add support for drive strength selection for SPT
   - sdhci: Enable HS400 for some Intel host controllers
   - sdhci: Convert to use the new re-tuning facility
   - sdhci: Various minor fixes and clean-ups
   - dw_mmc: Add support for hi6220
   - dw_mmc: Use core to handle absent write protect line
   - dw_mmc: Add support to switch voltage
   - tmio: Some fixes and modernizations
   - sh_mmcif: Improve clock rate calculation"

* tag 'mmc-v4.2' of git://git.linaro.org/people/ulf.hansson/mmc: (98 commits)
  mmc: queue: prevent soft lockups on PREEMPT=n
  mmc: mediatek: Add PM support for MMC driver
  mmc: mediatek: Add Mediatek MMC driver
  mmc: dt-bindings: add Mediatek MMC bindings
  mmc: card: Fixup request missing in mmc_blk_issue_rw_rq
  mmc: sdhci: fix low memory corruption
  mmc: sdhci-pci: Change AMD SDHCI quirk application scope
  i2c-piix4: Use Macro for AMD CZ SMBus device ID
  pci_ids: Add AMD KERNCZ device ID support
  mmc: queue: use swap() in mmc_queue_thread()
  mmc: dw_mmc: insmod followed by rmmod will hung for eMMC
  mmc: sdhci: Restore behavior while creating OCR mask
  mmc: sdhci-pxav3: fix device wakeup initialization
  mmc: core: Attach PM domain prior probing of SDIO func driver
  mmc: core: Remove redundant ->power_restore() callback for SD
  mmc: core: Remove redundant ->power_restore() callback for MMC
  mmc: sdhci-bcm2835: Actually enable the clock
  mmc: sdhci-bcm2835: Clean up platform allocations if sdhci init fails.
  mmc: sdhci-of-esdhc: enable interrupt mode to detect card
  mmc: sdhci-esdhc-imx: add quirk SDHCI_QUIRK2_BROKEN_HS200 for imx6qdl
  ...

Pull gpio updates from Linus Walleij:
 "This is the big bulk of GPIO changes queued for the v4.2 kernel
  series:

   - a big set of cleanups to the aged sysfs interface from Johan
     Hovold.  To get these in, v4.1-rc3 was merged into the tree as the
     first patch in that series had to go into stable.  This makes the
     locking much more fine-grained (get rid of the "big GPIO lock(s)"
     and store states in the GPIO descriptors.

   - rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value() to
     avoid confusions.

   - New drivers for:
      * NXP LPC18xx (currently LPC1850)
      * NetLogic XLP
      * Broadcom STB SoC's
      * Axis ETRAXFS
      * Zynq Ultrascale+ (subdriver)

   - ACPI:
      * make it possible to retrieve GpioInt resources from a GPIO
        device using acpi_dev_gpio_irq_get()
      * merge some dependent I2C changes exploiting this.
      * support the ARM X-Gene GPIO standby driver.

   - make it possible for the generic GPIO driver to read back the value
     set registers to reflect current status.

   - loads of OMAP IRQ handling fixes.

   - incremental improvements to Kona, max732x, OMAP, MXC, RCAR,
     PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x.

   - janitorial (constification, checkpatch cleanups)"

* tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits)
  gpio: Fix checkpatch.pl issues
  gpio: pcf857x: handle only enabled irqs
  gpio / ACPI: Return -EPROBE_DEFER if the gpiochip was not found
  GPIO / ACPI: export acpi_gpiochip_request(free)_interrupts for module use
  gpio: improve error reporting on own descriptors
  gpio: promote own request failure to pr_err()
  gpio: Added support to Zynq Ultrascale+ MPSoC
  gpio: add ETRAXFS GPIO driver
  fix documentation after renaming gpiod_set_array to gpiod_set_array_value
  gpio: Add GPIO support for Broadcom STB SoCs
  gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver
  gpio: tb10x: Drop unneeded free_irq() call
  gpio: crystalcove: set IRQCHIP_SKIP_SET_WAKE for the irqchip
  gpio: stp-xway: Use the of_property_read_u32 helper
  gpio: pcf857x: Check for irq_set_irq_wake() failures
  gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
  gpio: Prevent an integer overflow in the pca953x driver
  gpio: omap: rework omap_gpio_irq_startup to handle current pin state properly
  gpio: omap: rework omap_gpio_request to touch only gpio specific registers
  gpio: omap: rework omap_x_irq_shutdown to touch only irqs specific registers
  ...

Merge tag 'pwm/for-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This has a couple of fixes for Atmel, Samsung and Broadcom drivers.

  Some preparatory patches for more upcoming Intel work is included as
  well"

* tag 'pwm/for-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: lpss: pci: Add support for Broxton platform
  pwm: bcm-kona: Don't set polarity in probe
  pwm: Add pwmchip_add_with_polarity() API
  pwm: atmel: Fix incorrect CDTY value after disabling
  pwm: atmel: Fix incorrect CDTY value after enabling
  pwm: samsung: Use MODULE_DEVICE_TABLE() to include OF modalias
  pwm: Add support to remove registered consumer lookup tables

Pull crypto update from Herbert Xu:
 "Here is the crypto update for 4.2:

  API:

   - Convert RNG interface to new style.

   - New AEAD interface with one SG list for AD and plain/cipher text.
     All external AEAD users have been converted.

   - New asymmetric key interface (akcipher).

  Algorithms:

   - Chacha20, Poly1305 and RFC7539 support.

   - New RSA implementation.

   - Jitter RNG.

   - DRBG is now seeded with both /dev/random and Jitter RNG.  If kernel
     pool isn't ready then DRBG will be reseeded when it is.

   - DRBG is now the default crypto API RNG, replacing krng.

   - 842 compression (previously part of powerpc nx driver).

  Drivers:

   - Accelerated SHA-512 for arm64.

   - New Marvell CESA driver that supports DMA and more algorithms.

   - Updated powerpc nx 842 support.

   - Added support for SEC1 hardware to talitos"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (292 commits)
  crypto: marvell/cesa - remove COMPILE_TEST dependency
  crypto: algif_aead - Temporarily disable all AEAD algorithms
  crypto: af_alg - Forbid the use internal algorithms
  crypto: echainiv - Only hold RNG during initialisation
  crypto: seqiv - Add compatibility support without RNG
  crypto: eseqiv - Offer normal cipher functionality without RNG
  crypto: chainiv - Offer normal cipher functionality without RNG
  crypto: user - Add CRYPTO_MSG_DELRNG
  crypto: user - Move cryptouser.h to uapi
  crypto: rng - Do not free default RNG when it becomes unused
  crypto: skcipher - Allow givencrypt to be NULL
  crypto: sahara - propagate the error on clk_disable_unprepare() failure
  crypto: rsa - fix invalid select for AKCIPHER
  crypto: picoxcell - Update to the current clk API
  crypto: nx - Check for bogus firmware properties
  crypto: marvell/cesa - add DT bindings documentation
  crypto: marvell/cesa - add support for Kirkwood and Dove SoCs
  crypto: marvell/cesa - add support for Orion SoCs
  crypto: marvell/cesa - add allhwsupport module parameter
  crypto: marvell/cesa - add support for all armada SoCs
  ...

Pull ia64 paravirt removal from Tony Luck:
 "Nobody cares about paravirtualization on ia64 anymore"

* tag 'please-pull-paravirt' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: remove paravirt code

Pull m68k update from Geert Uytterhoeven.

* 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Use for_each_sg()
  m68k/defconfig: Update defconfigs for v4.1-rc6

Pull irq updates from Thomas Gleixner:
 "The irq departement delivers:

   - plug a potential race related to chained interrupt handlers

   - core updates which address the needs of the x86 irqdomain conversion

   - new irqchip callback to support affinity settings for VCPUs

   - the usual pile of updates to interrupt chip drivers

   - a few helper functions to allow further cleanups and
     simplifications

  I have a largish pile of coccinelle scripted/verified cleanups and
  simplifications pending on top of that, but I prefer to send that
  towards the end of the merge window when the arch/driver changes have
  hit your tree to avoid API change wreckage as far as possible"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  genirq: Remove bogus restriction in irq_move_mask_irq()
  irqchip: atmel-aic5: Add sama5d2 support
  irq: spear-shirq: Fix race in installing chained IRQ handler
  irq: irq-keystone: Fix race in installing chained IRQ handler
  gpio: gpio-tegra: Fix race in installing chained IRQ handler
  gpio: gpio-mxs: Fix race in installing chained IRQ handler
  gpio: gpio-mxc: Fix race in installing chained IRQ handler
  ARM: gemini: Fix race in installing GPIO chained IRQ handler
  GPU: ipu: Fix race in installing IPU chained IRQ handler
  ARM: sa1100: convert SA11x0 related code to use new chained handler helper
  irq: Add irq_set_chained_handler_and_data()
  irqchip: exynos-combiner: Save IRQ enable set on suspend
  genirq: Introduce helper function irq_data_get_affinity_mask()
  genirq: Introduce helper function irq_data_get_node()
  genirq: Introduce struct irq_common_data to host shared irq data
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  irqchip: gic: Simplify gic_configure_irq by using IRQCHIP_SET_TYPE_MASKED
  irqchip: renesas: intc-irqpin: Improve binding documentation
  genirq: Set IRQCHIP_SKIP_SET_WAKE for no_irq_chip
  ...

Pull NOHZ updates from Thomas Gleixner:
 "A few updates to the nohz infrastructure:

   - recursion protection for context tracking

   - make the TIF_NOHZ inheritance smarter

   - isolate cpus which belong to the NOHZ full set"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz: Set isolcpus when nohz_full is set
  nohz: Add tick_nohz_full_add_cpus_to() API
  context_tracking: Inherit TIF_NOHZ through forks instead of context switches
  context_tracking: Protect against recursion

Pull timer updates from Thomas Gleixner:
 "A rather largish update for everything time and timer related:

   - Cache footprint optimizations for both hrtimers and timer wheel

   - Lower the NOHZ impact on systems which have NOHZ or timer migration
     disabled at runtime.

   - Optimize run time overhead of hrtimer interrupt by making the clock
     offset updates smarter

   - hrtimer cleanups and removal of restrictions to tackle some
     problems in sched/perf

   - Some more leap second tweaks

   - Another round of changes addressing the 2038 problem

   - First step to change the internals of clock event devices by
     introducing the necessary infrastructure

   - Allow constant folding for usecs/msecs_to_jiffies()

   - The usual pile of clockevent/clocksource driver updates

  The hrtimer changes contain updates to sched, perf and x86 as they
  depend on them plus changes all over the tree to cleanup API changes
  and redundant code, which got copied all over the place.  The y2038
  changes touch s390 to remove the last non 2038 safe code related to
  boot/persistant clock"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
  clocksource: Increase dependencies of timer-stm32 to limit build wreckage
  timer: Minimize nohz off overhead
  timer: Reduce timer migration overhead if disabled
  timer: Stats: Simplify the flags handling
  timer: Replace timer base by a cpu index
  timer: Use hlist for the timer wheel hash buckets
  timer: Remove FIFO "guarantee"
  timers: Sanitize catchup_timer_jiffies() usage
  hrtimer: Allow hrtimer::function() to free the timer
  seqcount: Introduce raw_write_seqcount_barrier()
  seqcount: Rename write_seqcount_barrier()
  hrtimer: Fix hrtimer_is_queued() hole
  hrtimer: Remove HRTIMER_STATE_MIGRATE
  selftest: Timers: Avoid signal deadlock in leap-a-day
  timekeeping: Copy the shadow-timekeeper over the real timekeeper last
  clockevents: Check state instead of mode in suspend/resume path
  selftests: timers: Add leap-second timer edge testing to leap-a-day.c
  ntp: Do leapsecond adjustment in adjtimex read path
  time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
  ntp: Introduce and use SECS_PER_DAY macro instead of 86400
  ...

Pull x86 core updates from Ingo Molnar:
 "There were so many changes in the x86/asm, x86/apic and x86/mm topics
  in this cycle that the topical separation of -tip broke down somewhat -
  so the result is a more traditional architecture pull request,
  collected into the 'x86/core' topic.

  The topics were still maintained separately as far as possible, so
  bisectability and conceptual separation should still be pretty good -
  but there were a handful of merge points to avoid excessive
  dependencies (and conflicts) that would have been poorly tested in the
  end.

  The next cycle will hopefully be much more quiet (or at least will
  have fewer dependencies).

  The main changes in this cycle were:

   * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
     Gleixner)

     - This is the second and most intrusive part of changes to the x86
       interrupt handling - full conversion to hierarchical interrupt
       domains:

          [IOAPIC domain]   -----
                                 |
          [MSI domain]      --------[Remapping domain] ----- [ Vector domain ]
                                 |   (optional)          |
          [HPET MSI domain] -----                        |
                                                         |
          [DMAR domain]     -----------------------------
                                                         |
          [Legacy domain]   -----------------------------

       This now reflects the actual hardware and allowed us to distangle
       the domain specific code from the underlying parent domain, which
       can be optional in the case of interrupt remapping.  It's a clear
       separation of functionality and removes quite some duct tape
       constructs which plugged the remap code between ioapic/msi/hpet
       and the vector management.

     - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
       injection into guests (Feng Wu)

   * x86/asm changes:

     - Tons of cleanups and small speedups, micro-optimizations.  This
       is in preparation to move a good chunk of the low level entry
       code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
       Brian Gerst)

     - Moved all system entry related code to a new home under
       arch/x86/entry/ (Ingo Molnar)

     - Removal of the fragile and ugly CFI dwarf debuginfo annotations.
       Conversion to C will reintroduce many of them - but meanwhile
       they are only getting in the way, and the upstream kernel does
       not rely on them (Ingo Molnar)

     - NOP handling refinements. (Borislav Petkov)

   * x86/mm changes:

     - Big PAT and MTRR rework: making the code more robust and
       preparing to phase out exposing direct MTRR interfaces to drivers -
       in favor of using PAT driven interfaces (Toshi Kani, Luis R
       Rodriguez, Borislav Petkov)

     - New ioremap_wt()/set_memory_wt() interfaces to support
       Write-Through cached memory mappings.  This is especially
       important for good performance on NVDIMM hardware (Toshi Kani)

   * x86/ras changes:

     - Add support for deferred errors on AMD (Aravind Gopalakrishnan)

       This is an important RAS feature which adds hardware support for
       poisoned data.  That means roughly that the hardware marks data
       which it has detected as corrupted but wasn't able to correct, as
       poisoned data and raises an APIC interrupt to signal that in the
       form of a deferred error.  It is the OS's responsibility then to
       take proper recovery action and thus prolonge system lifetime as
       far as possible.

     - Add support for Intel "Local MCE"s: upcoming CPUs will support
       CPU-local MCE interrupts, as opposed to the traditional system-
       wide broadcasted MCE interrupts (Ashok Raj)

     - Misc cleanups (Borislav Petkov)

   * x86/platform changes:

     - Intel Atom SoC updates

  ... and lots of other cleanups, fixlets and other changes - see the
  shortlog and the Git log for details"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
  x86/hpet: Use proper hpet device number for MSI allocation
  x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
  x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
  x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
  x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  iommu, x86: Properly handle posted interrupts for IOMMU hotplug
  iommu, x86: Provide irq_remapping_cap() interface
  iommu, x86: Setup Posted-Interrupts capability for Intel iommu
  iommu, x86: Add cap_pi_support() to detect VT-d PI capability
  iommu, x86: Avoid migrating VT-d posted interrupts
  iommu, x86: Save the mode (posted or remapped) of an IRTE
  iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
  iommu: dmar: Provide helper to copy shared irte fields
  iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
  iommu: Add new member capability to struct irq_remap_ops
  x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
  x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
  x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
  ...

Pull x86 warning fixlet from Ingo Molnar:
 "A build fix for certain (rare) variants of binutils that did not make
  it into v4.1"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Fix overflow warning with 32-bit binutils

Pul x86 microcode updates from Ingo Molnar:
 "x86 microcode loader updates from Borislav Petkov:

   - early parsing of the built-in microcode

   - cleanups

   - misc smaller fixes"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Correct CPU family related variable types
  x86/microcode: Disable builtin microcode loading on 32-bit for now
  x86/microcode/intel: Rename get_matching_sig()
  x86/microcode/intel: Simplify get_matching_sig()
  x86/microcode/intel: Simplify update_match_cpu()
  x86/microcode/intel: Rename get_matching_microcode
  x86/cpu/microcode: Zap changelog
  x86/microcode: Parse built-in microcode early
  x86/microcode/intel: Remove unused @rev arg of get_matching_sig()
  x86/microcode/intel: Get rid of revision_is_newer()

Pull x86 kdump updates from Ingo Molnar:
 "Three kdump robustness related improvements (Joerg Roedel)"

* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/crash: Allocate enough low memory when crashkernel=high
  x86/swiotlb: Try coherent allocations with __GFP_NOWARN
  swiotlb: Warn on allocation failure in swiotlb_alloc_coherent()

Since 39b2bbe3 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.

Use this to simplify the driver. Furthermore this is one caller less
that stops us making the flags argument to gpiod_get*() mandatory.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Reduce message priority from dev_err to dev_dbg for missing cmt-speech
or ssi-protocol drivers, since they will be probed again and it may
result in spamming the boot log.
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

The user interface for timestamps in the new cmt_speech
driver is broken in multiple ways:

- The layout is incompatible between 32-bit and 64-bit user
  space, because of the size differences in 'struct timespec'.
  This means that the driver can not work when used with 32-bit
  user space on a 64-bit kernel.

- As there are plans to change 32-bit user space to use
  a 64-bit time_t type in the future, it will also be
  incompatible with new 32-bit user space.

- It is using ktime_get_ts under it's deprecated alias
  (do_posix_clock_monotonic_gettime).

To keep support for the user space tools written for this driver (which
have lived many years out-of-tree), the interface has been hardened to
unsigned 32-bit values.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

Pull x86 FPU updates from Ingo Molnar:
 "This tree contains two main changes:

   - The big FPU code rewrite: wide reaching cleanups and reorganization
     that pulls all the FPU code together into a clean base in
     arch/x86/fpu/.

     The resulting code is leaner and faster, and much easier to
     understand.  This enables future work to further simplify the FPU
     code (such as removing lazy FPU restores).

     By its nature these changes have a substantial regression risk: FPU
     code related bugs are long lived, because races are often subtle
     and bugs mask as user-space failures that are difficult to track
     back to kernel side backs.  I'm aware of no unfixed (or even
     suspected) FPU related regression so far.

   - MPX support rework/fixes.  As this is still not a released CPU
     feature, there were some buglets in the code - should be much more
     robust now (Dave Hansen)"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (250 commits)
  x86/fpu: Fix double-increment in setup_xstate_features()
  x86/mpx: Allow 32-bit binaries on 64-bit kernels again
  x86/mpx: Do not count MPX VMAs as neighbors when unmapping
  x86/mpx: Rewrite the unmap code
  x86/mpx: Support 32-bit binaries on 64-bit kernels
  x86/mpx: Use 32-bit-only cmpxchg() for 32-bit apps
  x86/mpx: Introduce new 'directory entry' to 'addr' helper function
  x86/mpx: Add temporary variable to reduce masking
  x86: Make is_64bit_mm() widely available
  x86/mpx: Trace allocation of new bounds tables
  x86/mpx: Trace the attempts to find bounds tables
  x86/mpx: Trace entry to bounds exception paths
  x86/mpx: Trace #BR exceptions
  x86/mpx: Introduce a boot-time disable flag
  x86/mpx: Restrict the mmap() size check to bounds tables
  x86/mpx: Remove redundant MPX_BNDCFG_ADDR_MASK
  x86/mpx: Clean up the code by not passing a task pointer around when unnecessary
  x86/mpx: Use the new get_xsave_field_ptr()API
  x86/fpu/xstate: Wrap get_xsave_addr() to make it safer
  x86/fpu/xstate: Fix up bad get_xsave_addr() assumptions
  ...

Pull x86 EFI updates from Ingo Molnar:
 "EFI changes:

   - Use idiomatic negative error values in efivar_create_sysfs_entry()
     instead of returning '1' to indicate error (Dan Carpenter)

   - Implement new support to expose the EFI System Resource Tables in
     sysfs, which provides information for performing firmware updates
     (Peter Jones)

   - Documentation cleanup in the EFI handover protocol section which
     falsely claimed that 'cmdline_size' needed to be filled out by the
     boot loader (Alex Smith)

   - Align the order of SMBIOS tables in /sys/firmware/efi/systab to
     match the way that we do things for ACPI and add documentation to
     Documentation/ABI (Jean Delvare)"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Work around ia64 build problem with ESRT driver
  efi: Add 'systab' information to Documentation/ABI
  efi: dmi: List SMBIOS3 table before SMBIOS table
  efi/esrt: Fix some compiler warnings
  x86, doc: Remove cmdline_size from list of fields to be filled in for EFI handover
  efi: Add esrt support
  efi: efivar_create_sysfs_entry() should return negative error codes

Pull x86 debugging documentation updates from Ingo Molnar:
 "Documentation updates about x86 kernel stacks"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Documentation: Adapt Ingo's explanation on printing backtraces
  x86/Documentation: Remove STACKFAULT_STACK bulletpoint
  x86/Documentation: Move kernel-stacks doc one level up