According to Documentation/i2c/fault-codes.rst, NACK after sending an
address should be -ENXIO.
Signed-off-by: Wolfram Sang <wsa@kernel.org>

There used to be error messages which had to go. Now, it only consists
of 'break's, so it can go.
Signed-off-by: Wolfram Sang <wsa@kernel.org>

The ppc64le_allmodconfig sets I2C_PASEMI=y and leaves COMPILE_TEST to
default to y and I2C_APPLE to default to m, running into a known
incompatible configuration that breaks the build [1]. Specifically,
a common dependency (i2c-pasemi-core.o in this case) cannot be used by
both builtin and module consumers.

Disable I2C_APPLE when I2C_PASEMI is a builtin to prevent this.

[1]: https://lore.kernel.org/all/202112061809.XT99aPrf-lkp@intel.comSuggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Pull more thermal control updates from Rafael Wysocki:
 "These fix two issues in the Intel thermal control drivers.

  Specifics:

   - Fix an error pointer dereference in the quark_dts Intel thermal
     driver (Dan Carpenter)

   - Fix the intel_bxt_pmic_thermal driver Kconfig entry to select
     REGMAP which is not user-visible instead of depending on it (Randy
     Dunlap)"

* tag 'thermal-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: BXT_PMIC: select REGMAP instead of depending on it
  thermal: intel: quark_dts: fix error pointer dereference

Pull more ACPI updates from Rafael Wysocki:
 "These update ACPI quirks for some x86 platforms and add an IRQ
  override quirk for one more system.

  Specifics:

   - Add an ACPI IRQ override quirk for Asus Expertbook B2402FBA
     (Vojtech Hejsek)

   - Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
     any more after a firmware update (Mario Limonciello)

   - Add all Cezanne systems to the list for forcing StorageD3Enable,
     because they all need the same quirk (Mario Limonciello)"

* tag 'acpi-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable
  ACPI: x86: Drop quirk for HP Elitebook
  ACPI: resource: Skip IRQ override on Asus Expertbook B2402FBA

Pull more power management updates from Rafael Wysocki:
 "These update power capping (new hardware support and cleanup) and
  cpufreq (bug fixes, cleanups and intel_pstate adjustment for a new
  platform).

  Specifics:

   - Fix error handling in the apple-soc cpufreq driver (Dan Carpenter)

   - Change the log level of a message in the amd-pstate cpufreq driver
     so it is more visible to users (Kai-Heng Feng)

   - Adjust the balance_performance EPP value for Sapphire Rapids in the
     intel_pstate cpufreq driver (Srinivas Pandruvada)

   - Remove MODULE_LICENSE from 3 pieces of non-modular code (Nick
     Alcock)

   - Make a read-only kobj_type structure in the schedutil cpufreq
     governor constant (Thomas Weißschuh)

   - Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL
     power capping driver (Sumeet Pawnikar)"

* tag 'pm-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: apple-soc: Fix an IS_ERR() vs NULL check
  powercap: remove MODULE_LICENSE in non-modules
  cpufreq: intel_pstate: remove MODULE_LICENSE in non-modules
  powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC
  cpufreq: amd-pstate: remove MODULE_LICENSE in non-modules
  cpufreq: schedutil: make kobj_type structure constant
  cpufreq: amd-pstate: Let user know amd-pstate is disabled
  cpufreq: intel_pstate: Adjust balance_performance EPP for Sapphire Rapids

Pull more io_uring updates from Jens Axboe:
 "Here's a set of fixes/changes that didn't make the first cut, either
  because they got queued before I sent the early merge request, or
  fixes that came in afterwards. In detail:

   - Don't set MSG_NOSIGNAL on recv/recvmsg opcodes, as AF_PACKET will
     error out (David)

   - Fix for spurious poll wakeups (me)

   - Fix for a file leak for buffered reads in certain conditions
     (Joseph)

   - Don't allow registered buffers of mixed types (Pavel)

   - Improve handling of huge pages for registered buffers (Pavel)

   - Provided buffer ring size calculation fix (Wojciech)

   - Minor cleanups (me)"

* tag 'io_uring-6.3-2023-03-03' of git://git.kernel.dk/linux:
  io_uring/poll: don't pass in wake func to io_init_poll_iocb()
  io_uring: fix fget leak when fs don't support nowait buffered read
  io_uring/poll: allow some retries for poll triggering spuriously
  io_uring: remove MSG_NOSIGNAL from recvmsg
  io_uring/rsrc: always initialize 'folio' to NULL
  io_uring/rsrc: optimise registered huge pages
  io_uring/rsrc: optimise single entry advance
  io_uring/rsrc: disallow multi-source reg buffers
  io_uring: remove unused wq_list_merge
  io_uring: fix size calculation when registering buf ring
  io_uring/rsrc: fix a comment in io_import_fixed()
  io_uring: rename 'in_idle' to 'in_cancel'
  io_uring: consolidate the put_ref-and-return section of adding work

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
      - Don't access released socket during error recovery (Akinobu
        Mita)
      - Bring back auto-removal of deleted namespaces during sequential
        scan (Christoph Hellwig)
      - Fix an error code in nvme_auth_process_dhchap_challenge (Dan
        Carpenter)
      - Show well known discovery name (Daniel Wagner)
      - Add a missing endianess conversion in effects masking (Keith
        Busch)

 - Fix for a regression introduced in blk-rq-qos during init in this
   merge window (Breno)

 - Reorder a few fields in struct blk_mq_tag_set, eliminating a few
   holes and shrinking it (Christophe)

 - Remove redundant bdev_get_queue() NULL checks (Juhyung)

 - Add sed-opal single user mode support flag (Luca)

 - Remove SQE128 check in ublk as it isn't needed, saving some memory
   (Ming)

 - Op specific segment checking for cloned requests (Uday)

 - Exclusive open partition scan fixes (Yu)

 - Loop offset/size checking before assigning them in the device (Zhong)

 - Bio polling fixes (me)

* tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux:
  blk-mq: enforce op-specific segment limits in blk_insert_cloned_request
  nvme-fabrics: show well known discovery name
  nvme-tcp: don't access released socket during error recovery
  nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
  nvme: bring back auto-removal of deleted namespaces during sequential scan
  blk-iocost: Pass gendisk to ioc_refresh_params
  nvme: fix sparse warning on effects masking
  block: be a bit more careful in checking for NULL bdev while polling
  block: clear bio->bi_bdev when putting a bio back in the cache
  loop: loop_set_status_from_info() check before assignment
  ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd
  block: remove more NULL checks after bdev_get_queue()
  blk-mq: Reorder fields in 'struct blk_mq_tag_set'
  block: fix scan partition for exclusively open device again
  block: Revert "block: Do not reread partition table on exclusively open device"
  sed-opal: add support flag for SUM in status ioctl

Pull ATA fix from Damien Le Moal:

 - Revert commit 104ff59a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
   controller") as it is causing serious regressions (failure to boot)
   on some laptops

* tag 'ata-6.3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"

Merge additional ACPI quirks for x86 systems:

 - Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
   any more after a firmware update (Mario Limonciello).

 - Add all Cezanne systems to the list for forcing StorageD3Enable,
   because they all need the same quirk (Mario Limonciello).

* acpi-pm:
  ACPI: x86: Drop quirk for HP Elitebook

* acpi-x86:
  ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable

Pull more s390 updates from Heiko Carstens:

 - Add empty command line parameter handling stubs to kernel for all
   command line parameters which are handled in the decompressor. This
   avoids invalid "Unknown kernel command line parameters" messages from
   the kernel, and also avoids that these will be incorrectly passed to
   user space. This caused already confusion, therefore add the empty
   stubs

 - Add missing phys_to_virt() handling to machine check handler

 - Introduce and use a union to be used for zcrypt inline assemblies.
   This makes sure that only a register wide member of the union is
   passed as input and output parameter to inline assemblies, while
   usual C code uses other members of the union to access bit fields of
   it

 - Add and use a READ_ONCE_ALIGNED_128() macro, which can be used to
   atomically read a 128-bit value from memory. This replaces the
   (mis-)use of the 128-bit cmpxchg operation to do the same in cpum_sf
   code. Currently gcc does not generate the used lpq instruction if
   __READ_ONCE() is used for aligned 128-bit accesses, therefore use
   this s390 specific helper

 - Simplify machine check handler code if a task needs to be killed
   because of e.g. register corruption due to a machine malfunction

 - Perform CPU reset to clear pending interrupts and TLB entries on an
   already stopped target CPU before delegating work to it

 - Generate arch/s390/boot/vmlinux.map link map for the decompressor,
   when CONFIG_VMLINUX_MAP is enabled for debugging purposes

 - Fix segment type handling for dcssblk devices. It incorrectly always
   returned type "READ/WRITE" even for read-only segements, which can
   result in a kernel panic if somebody tries to write to a read-only
   device

 - Sort config S390 select list again

 - Fix two kprobe reenter bugs revealed by a recently added kprobe kunit
   test

* tag 's390-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kprobes: fix current_kprobe never cleared after kprobes reenter
  s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler
  s390/Kconfig: sort config S390 select list again
  s390/extmem: return correct segment type in __segment_load()
  s390/decompressor: add link map saving
  s390/smp: perform cpu reset before delegating work to target cpu
  s390/mcck: cleanup user process termination path
  s390/cpum_sf: use READ_ONCE_ALIGNED_128() instead of 128-bit cmpxchg
  s390/rwonce: add READ_ONCE_ALIGNED_128() macro
  s390/ap,zcrypt,vfio: introduce and use ap_queue_status_reg union
  s390/nmi: fix virtual-physical address confusion
  s390/setup: do not complain about parameters handled in decompressor

Pull more RISC-V updates from Palmer Dabbelt:

 - Some cleanups and fixes for the Zbb-optimized string routines

 - Support for custom (vendor or implementation defined) perf events

 - COMMAND_LINE_SIZE has been increased to 1024

* tag 'riscv-for-linus-6.3-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Bump COMMAND_LINE_SIZE value to 1024
  drivers/perf: RISC-V: Allow programming custom firmware events
  riscv, lib: Fix Zbb strncmp
  RISC-V: improve string-function assembly

Merge additional power capping changes for 6.3-rc1:

 - Remove MODULE_LICENSE from non-modular power capping code (Nick
   Alcock).

 - Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL
   power capping driver (Sumeet Pawnikar).

* powercap:
  powercap: remove MODULE_LICENSE in non-modules
  powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC

Pull RTC updates from Alexandre Belloni:
 "A few drivers got some nice cleanups and a new driver are making the
  bulk of the changes.

  Subsystem:
   - allow rtc_read_alarm without read_alarm callback

  New driver:
   - NXP BBNSM module RTC

  Drivers:
   - use IRQ flags from fwnode when available
   - abx80x: nvmem support
   - brcmstb-waketimer: add non-wake alarm support
   - ingenic: provide CLK32K clock
   - isl12022: cleanups
   - moxart: switch to using gpiod API
   - pcf85363: allow setting quartz load
   - pm8xxx: cleanups and support for setting time
   - rv3028, rv3032: add ACPI support"

* tag 'rtc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (64 commits)
  rtc: pm8xxx: add support for nvmem offset
  dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset
  rtc: abx80x: Add nvmem support
  rtc: rx6110: Remove unused of_gpio,h
  rtc: efi: Avoid spamming the log on RTC read failure
  rtc: isl12022: sort header inclusion alphabetically
  rtc: isl12022: Join string literals back
  rtc: isl12022: Drop unneeded OF guards and of_match_ptr()
  rtc: isl12022: Explicitly use __le16 type for ISL12022_REG_TEMP_L
  rtc: isl12022: Get rid of unneeded private struct isl12022
  rtc: pcf85363: add support for the quartz-load-femtofarads property
  dt-bindings: rtc: nxp,pcf8563: move pcf85263/pcf85363 to a dedicated binding
  rtc: allow rtc_read_alarm without read_alarm callback
  rtc: rv3032: add ACPI support
  rtc: rv3028: add ACPI support
  rtc: bbnsm: Add the bbnsm rtc support
  rtc: jz4740: Register clock provider for the CLK32K pin
  rtc: jz4740: Use dev_err_probe()
  rtc: jz4740: Use readl_poll_timeout
  dt-bindings: rtc: Add #clock-cells property
  ...

Commit 104ff59a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
controller") enabled low power mode for the Tiger Lake AHIC adapter in
the author system but created regressions for others. Revert this patch
for now until a better solution is found to make this adapter
eco-friendly.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217114
CC: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

The block layer might merge together discard requests up until the
max_discard_segments limit is hit, but blk_insert_cloned_request checks
the segment count against max_segments regardless of the req op. This
can result in errors like the following when discards are issued through
a DM device and max_discard_segments exceeds max_segments for the queue
of the chosen underlying device.

blk_insert_cloned_request: over max segments limit. (256 > 129)

Fix this by looking at the req_op and enforcing the appropriate segment
limit - max_discard_segments for REQ_OP_DISCARDs and max_segments for
everything else.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230301000655.48112-1-ushankar@purestorage.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull drm fixes from Dave Airlie:
 "fbdev:
   - fix uninit var in error path

  shmem:
   - revert unGPLing an export

  i915:
   - Don't use stolen memory or BAR mappings for ring buffers with LLC
   - Add inverted backlight quirk for HP 14-r206nv
   - Fix GSI offset for MCR lookups
   - GVT fixes (memleak, debugfs attributes, kconfig, typos)

  amdgpu:
   - SMU 13 fixes
   - Enable TMZ for GC 10.3.6
   - Misc display fixes
   - Buddy allocator fixes
   - GC 11 fixes
   - S0ix fix
   - INFO IOCTL queries for GC 11
   - VCN harvest fixes for SR-IOV
   - UMC 8.10 RAS fixes
   - Don't restrict bpc to 8
   - NBIO 7.5 fix
   - Allow freesync on PCon for more devices

  amdkfd:
   - SDMA fix
   - Illegal memory access fix"

* tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits)
  drm/amdgpu/vcn: fix compilation issue with legacy gcc
  drm/amd/display: Extend Freesync over PCon support for more devices
  Revert "drm/amd/display: Do not set DRR on pipe commit"
  drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes
  drm/amd/display: Ext displays with dock can't recognized after resume
  drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini
  drm/amdgpu: remove unused variable ring
  drm/amd/display: fix dm irq error message in gpu recover
  drm/amd: Fix initialization for nbio 7.5.1
  drm/amd/display: Don't restrict bpc to 8 bpc
  drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable
  drm/radeon: Fix eDP for single-display iMac11,2
  drm/shmem-helper: Revert accidental non-GPL export
  drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init()
  drm/amd/pm: downgrade log level upon SMU IF version mismatch
  drm/amdgpu: Add ecc info query interface for umc v8_10
  drm/amdgpu: Add convert_error_address function for umc v8_10
  drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err
  drm/amdgpu: change default behavior of bad_page_threshold parameter
  drm/amdgpu: exclude duplicate pages from UMC RAS UE count
  ...

Pull arm64 fixes from Catalin Marinas:

 - In copy_highpage(), only reset the tag of the destination pointer if
   KASAN_HW_TAGS is enabled so that user-space MTE does not interfere
   with KASAN_SW_TAGS (which relies on top-byte-ignore).

 - Remove warning if SME is detected without SVE, the kernel can cope
   with such configuration (though none in the field currently).

 - In cfi_handler(), pass the ESR_EL1 value to die() for consistency
   with other die() callers.

 - Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP on arm64 since the pte
   manipulation from the generic vmemmap_remap_pte() does not follow the
   required ARM break-before-make sequence (clear the pte, flush the
   TLBs, set the new pte). It may be re-enabled once this sequence is
   sorted.

 - Fix possible memory leak in the arm64 ACPI code if the SMCCC version
   and conduit checks fail.

 - Forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE since gcc ignores
  -falign-functions=N with -Os.

 - Don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN as no
   randomisation would actually take place.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kaslr: don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN
  arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE
  arm64: acpi: Fix possible memory leak of ffh_ctxt
  arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
  arm64: pass ESR_ELx to die() of cfi_handler
  arm64/fpsimd: Remove warning for SME without SVE
  arm64: Reset KASAN tag in copy_highpage with HW tags only

Merge tag 'amd-drm-fixes-6.3-2023-03-02' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.3-2023-03-02:

amdgpu:
- SMU 13 fixes
- Enable TMZ for GC 10.3.6
- Misc display fixes
- Buddy allocator fixes
- GC 11 fixes
- S0ix fix
- INFO IOCTL queries for GC 11
- VCN harvest fixes for SR-IOV
- UMC 8.10 RAS fixes
- Don't restrict bpc to 8
- NBIO 7.5 fix
- Allow freesync on PCon for more devices

amdkfd:
- SDMA fix
- Illegal memory access fix

radeon:
- Display fix for iMac11,2

UAPI:
- Add some additional INFO IOCTL queries for GC 11 fixes
  Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302051843.7793-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2023-02-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 fixes for v6.3-rc1:
- Don't use stolen memory or BAR mappings for ring buffers with LLC
- Add inverted backlight quirk for HP 14-r206nv
- Fix GSI offset for MCR lookups
- GVT fixes (memleak, debugfs attributes, kconfig, typos)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87cz5v2z0j.fsf@intel.com

Merge tag 'drm-misc-next-fixes-2023-02-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

Fixes uninitialized variables in fbdev error paths and reverts an
SHMEM-helper symbol back to being exported as GPL.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/3Fw1HjgPcplo+j@linux-uq9g

Pull watchdog updates from Wim Van Sebroeck:

 - qcom-wdt dt-bindings improvements and additions (like MSM8994 and
   MDM9615)

 - mtk_wdt: Add reset_by_toprgu support

 - devm_clk_get_enabled() helper changes

 - Fix kmemleak in watchdog_cdev_register

 - watchdog sysfs improvements

 - Other fixes and small improvements

* tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (52 commits)
  watchdog: at91rm9200: Only warn once about problems in .remove()
  watchdog: mt7621-wdt: avoid ralink architecture dependent code
  watchdog: mt7621-wdt: avoid static global declarations
  dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers
  watchdog: sbsa_wdog: Make sure the timeout programming is within the limits
  dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible
  watchdog: report options in sysfs
  watchdog: report fw_version in sysfs
  dt-bindings: watchdog: fsl-imx: document suspend in wait mode
  watchdog: imx2_wdg: suspend watchdog in WAIT mode
  watchdog: pcwd_usb: Fix attempting to access uninitialized memory
  dt-bindings: watchdog: qcom-wdt: merge MSM timer
  dt-bindings: watchdog: qcom-wdt: allow interrupts
  dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615
  dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles
  dt-bindings: watchdog: qcom-wdt: do not allow fallback alone
  dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019
  watchdog: Fix kmemleak in watchdog_cdev_register
  watchdog: Include <linux/kstrtox.h> when appropriate
  watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path
  ...

Pull ceph fixes from Ilya Dryomov:
 "Two small fixes from Xiubo and myself, marked for stable"

* tag 'ceph-for-6.3-rc1' of https://github.com/ceph/ceph-client:
  rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
  ceph: update the time stamps and try to drop the suid/sgid

Pull more MIPS updates from Thomas Bogendoerfer:
 "A few more cleanups and fixes"

* tag 'mips_6.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Workaround clang inline compat branch issue
  mips: dts: ralink: mt7621: add phandle to system controller node for watchdog
  mips: dts: ralink: mt7621: rename watchdog node from 'wdt' into 'watchdog'
  mips: ralink: make SOC_MT7621 select PINCTRL
  mips: remove SYS_HAS_CPU_MIPS32_R1 from RALINK
  MIPS: cevt-r4k: Offset the value used to clear compare interrupt
  MIPS: smp-cps: Don't rely on CP0_CMGCRBASE
  MIPS: Remove DMA_PERDEV_COHERENT

Pull objtool updates from Ingo Molnar:

 - Shrink 'struct instruction', to improve objtool performance & memory
   footprint

 - Other maximum memory usage reductions - this makes the build both
   faster, and fixes kernel build OOM failures on allyesconfig and
   similar configs when they try to build the final (large) vmlinux.o

 - Fix ORC unwinding when a kprobe (INT3) is set on a stack-modifying
   single-byte instruction (PUSH/POP or LEAVE). This requires the
   extension of the ORC metadata structure with a 'signal' field

 - Misc fixes & cleanups

* tag 'objtool-core-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  objtool: Fix ORC 'signal' propagation
  objtool: Remove instruction::list
  x86: Fix FILL_RETURN_BUFFER
  objtool: Fix overlapping alternatives
  objtool: Union instruction::{call_dest,jump_table}
  objtool: Remove instruction::reloc
  objtool: Shrink instruction::{type,visited}
  objtool: Make instruction::alts a single-linked list
  objtool: Make instruction::stack_ops a single-linked list
  objtool: Change arch_decode_instruction() signature
  x86/entry: Fix unwinding from kprobe on PUSH/POP instruction
  x86/unwind/orc: Add 'signal' field to ORC metadata
  objtool: Optimize layout of struct special_alt
  objtool: Optimize layout of struct symbol
  objtool: Allocate multiple structures with calloc()
  objtool: Make struct check_options static
  objtool: Make struct entries[] static and const
  objtool: Fix HOSTCC flag usage
  objtool: Properly support make V=1
  objtool: Install libsubcmd in build
  ...

Pull auxdisplay fix from Miguel Ojeda:

  - hd44780: Fix potential memory leak in hd44780_remove() (Jianglei Nie)

* tag 'auxdisplay-6.3' of https://github.com/ojeda/linux:
  auxdisplay: hd44780: Fix potential memory leak in hd44780_remove()

Merge tag 'driver-core-6.3-rc1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here is another small set of driver core patches.

  They resolve some reported problems with the previous driver core
  patches that are in your tree.

  They solve a problem with the bus_type cleanup as reported and fixed
  by Geert, and two fw_devlink changes to make debugging problems
  easier.

  There is one known outstanding problem with the fw_deflink changes in
  your tree that is still being worked on, and it looks like a clk core
  change will be submitted soon for that, probably after 6.3-rc1.

  All three of these have been in linux-next with no reported problems
  (only reports that they fixed problems)"

* tag 'driver-core-6.3-rc1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: fw_devlink: Print full path and name of fwnode
  driver core: fw_devlink: Avoid spurious error message
  driver core: bus: Handle early calls to bus_to_subsys()

Pull spi fixes from Mark Brown:
 "A small set of fixes for SPI drivers, Krishna has been doing a bunch
  of work on Tegra210 QuadSPI and found a bunch of issues there and
  there's a couple of small fixes for other drivers too"

* tag 'spi-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: tegra210-quad: Fix iterator outside loop
  spi: tegra210-quad: Fix validate combined sequence
  spi: tegra210-quad: set half duplex flag
  spi: spi-sn-f-ospi: fix duplicate flag while assigning to mode_bits
  spi: cadence-quadspi: Fix cancel the indirect read mask

Pull regulator fixes from Mark Brown:
 "Two fixes here, one driver fix for incorrect error codes and a fix in
  the core to use ktime_get_boottime() in order to fix accounting of the
  time regulators have been powered down over suspend. ktime_get()
  pauses over suspend which is not what we want"

* tag 'regulator-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
  regulator: max597x: Fix error return code in max597x_get_status

Recent test_kprobe_missed kprobes kunit test uncovers the following
problem. Once kprobe is triggered from another kprobe (kprobe reenter),
all future kprobes on this cpu are considered as kprobe reenter, thus
pre_handler and post_handler are not being called and kprobes are counted
as "missed".

Commit b9599798 ("[S390] kprobes: activation and deactivation")
introduced a simpler scheme for kprobes (de)activation and status
tracking by using push_kprobe/pop_kprobe, which supposed to work for
both initial kprobe entry as well as kprobe reentry and helps to avoid
handling those two cases differently. The problem is that a sequence of
calls in case of kprobes reenter:
push_kprobe() <- NULL (current_kprobe)
push_kprobe() <- kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
leaves "kprobe1" as "current_kprobe" on this cpu, instead of setting it
to NULL. In fact push_kprobe/pop_kprobe can only store a single state
(there is just one prev_kprobe in kprobe_ctlblk). Which is a hack but
sufficient, there is no need to have another prev_kprobe just to store
NULL. To make a simple and backportable fix simply reset "prev_kprobe"
when kprobe is poped from this "stack". No need to worry about
"kprobe_status" in this case, because its value is only checked when
current_kprobe != NULL.

Cc: stable@vger.kernel.org
Fixes: b9599798 ("[S390] kprobes: activation and deactivation")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Recent test_kprobe_missed kprobes kunit test uncovers the following error
(reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled):

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by kunit_try_catch/662.
irq event stamp: 280
hardirqs last  enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0
hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318
softirqs last  enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G                 N 6.2.0-173644-g44c18d77f0c0 #2
Hardware name: IBM 3931 A01 704 (LPAR)
Call Trace:
 [<00000003e60a3a00>] dump_stack_lvl+0x120/0x198
 [<00000003e3d02e82>] __might_resched+0x60a/0x668
 [<00000003e60b9908>] __mutex_lock+0xc0/0x14e0
 [<00000003e60bad5a>] mutex_lock_nested+0x32/0x40
 [<00000003e3f7b460>] unregister_kprobe+0x30/0xd8
 [<00000003e51b2602>] test_kprobe_missed+0xf2/0x268
 [<00000003e51b5406>] kunit_try_run_case+0x10e/0x290
 [<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8
 [<00000003e3ce30f8>] kthread+0x2d0/0x398
 [<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8
 [<00000003e60ccada>] ret_from_fork+0xa/0x40

The reason for this error report is that kprobes handling code failed
to restore irqs.

The problem is that when kprobe is triggered from another kprobe
post_handler current sequence of enable_singlestep / disable_singlestep
is the following:
enable_singlestep  <- original kprobe (saves kprobe_saved_imask)
enable_singlestep  <- kprobe triggered from post_handler (clobbers kprobe_saved_imask)
disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask)
disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask)

There is just one kprobe_ctlblk per cpu and both calls saves and
loads irq mask to kprobe_saved_imask. To fix the problem simply move
resume_execution (which calls disable_singlestep) before calling
post_handler. This also fixes the problem that post_handler is called
with pt_regs which were not yet adjusted after single-stepping.

Cc: stable@vger.kernel.org
Fixes: 4ba069b8 ("[S390] add kprobes support.")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The single difference between returning 0 and returning an error code in
a platform remove callback is that in the latter case the platform core
emits a warning about the error being ignored.

at91wdt_remove() already emits a warning in the error case, so suppress
the more generic (and less helpful) one by returning 0.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230217095317.1213387-1-u.kleine-koenig@pengutronix.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

MT7621 SoC has a system controller node. Watchdog need to access to reset
status register. Ralink architecture and related driver are old and from
the beggining they are using some architecture dependent operations for
accessing this shared registers through 'asm/mach-ralink/ralink_regs.h'
header file. However this is not ideal from a driver perspective which can
just access to the system controller registers in an arch independent way
using regmap syscon APIs. Update Kconfig accordingly to select new added
dependencies and allow driver to be compile tested.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230214103936.1061078-6-sergio.paracuellos@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Instead of using static global definitions in driver code, refactor code
introducing a new watchdog driver data structure and use it along the
code.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230214103936.1061078-5-sergio.paracuellos@gmail.com
[groeck: unsigned -> unsigned int]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

MT7621 SoC provides a system controller node for accessing to some registers.
Add a phandle in this node to avoid using MIPS related arch operations and
includes in watchdog driver code.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230214103936.1061078-2-sergio.paracuellos@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
	for (int i = 0; i < adev->vcn.num_vcn_inst; ++i) {
Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
More branch devices are able to support Freesync
over PCon so include them in the list of supporting devices.

[how]
Add more compatible PCon devices in the whitelist
for Freesync over Pcon.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 4f1b5e73.

[Why & How]
Original change causes a regression. Revert
until fix is available.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:

  shift exponent 4294966273 is too large for 32-bit type 'int'

[HOW]

In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Needs to set the default value of the LTTPR timeout after resume.

[How]
Set the default (3.2ms) timeout at resuming if the sink supports
LTTPR
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>