- 30 Oct, 2023 18 commits
-
-
Arnd Bergmann authored
With all the other PCMCIA WLAN adapters gone from the kernel, this is now the last remaining device with this interface, but as far as I can tell, all the actual libertas users were actually using either SDIO or USB. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@kernel.org>
-
Ping-Ke Shih authored
PHY status IEs is used to have more information about received packets, such as RSSI and EVM. For each PHY IE type, it has different predefined PHY IE length, and the length are changed, so add them for WiFi 7 chips accordingly. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
For WiFi 7 chips, some fields and predefined length are changed, so add them accordingly. The mac_id field is used to identify peer that send a packet, and we can use it to know RSSI and traffic from the peer. For WiFi 7 chips, RXWD.mac_id of PPDU status packet is not set by hardware. Instead, we should fill it by rxinfo_user[].mac_id of PPDU status content. Also, filter out invalid reports to prevent warning messages keep showing. Signed-off-by:
-
Zong-Zhe Yang authored
Different chip can support different max user in one PPDU report. So, we now configure it in chip info. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
The new chips change hardware design to shrink entry size of address CAM from 0x40 to 0x20, so make this change accordingly. Signed-off-by:
-
Justin Stitt authored
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. `extra` is clearly supposed to be NUL-terminated which is evident by the manual NUL-byte assignment as well as its immediate usage with strlen(). Moreover, let's NUL-pad since there is deliberate effort (48 instances) made elsewhere to zero-out buffers in these getters and setters: 6050 | memset(local->config.nodeName, 0, sizeof(local->config.nodeName)); 6130 | memset(local->config.rates, 0, 8); 6139 | memset(local->config.rates, 0, 8); 6414 | memset(key.key, 0, MAX_KEY_SIZE); 6497 | memset(extra, 0, 16); (to be clear, strncpy also NUL-padded -- we are matching that behavior) Considering the above, a suitable replacement is `strscpy_pad` due to the fact that it guarantees both NUL-termination and NUL-padding on the destination buffer. We can also replace the hard-coded size of "16" to IW_ESSID_MAX_SIZE because this function is a wext handler. In wext-core.c we have: static const struct iw_ioctl_description standard_ioctl[] = { ... [IW_IOCTL_IDX(SIOCGIWNICKN)] = { .header_type = IW_HEADER_TYPE_POINT, .token_size = 1, .max_tokens = IW_ESSID_MAX_SIZE, }, So the buffer size is (strangely) IW_ESSID_MAX_SIZE Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by:Justin Stitt <justinstitt@google.com> Reviewed-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by:
-
Dmitry Antipov authored
Ensure 'sdio_release_host()' is always issued on return from 'wilc_sdio_cmd53()'. Compile tested only. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Acked-by:
Ajay Singh <ajay.kathat@microchip.com> Signed-off-by:
-
Dmitry Antipov authored
For 'struct wilc_remain_ch', drop set but otherwise unused 'duration' field and adjust 'expired' callback assuming that the only data passed to it is 'struct wilc_vif *', thus making 'wilc_remain_on_channel()' a bit simpler as well. Compile tested only. Signed-off-by:
-
Ping-Ke Shih authored
The register to enable/disable PCI DMA IO has many variants, so define and use a field to control it accordingly. Signed-off-by:
-
Ping-Ke Shih authored
To make hardware efficient to determine if RX ring is full, introduce new design that checks if reading and writing indices are equal. Comparing to old design, initial indices of both reading and writing indices are 0 that means empty, and hardware checks full by "writing index + 1 == reading index". The "+1" has extra cost for hardware, so new design is to avoid this. Take ring size is 256 as an example, the initial reading and writing indices are 255 and 0 respectively; the initial values mean empty. If two indices are the same, for example 5 and 5, it means ring is full. wp rp used_cnt state 255 0 0 initial (ring is empty) 255 1 1 receive 1st packet 255 2 2 receive 2nd packet 0 2 1 driver read 1st packet 1 2 0 driver read 2nd packet (ring is empty) : 5 5 255 ring is full Note: 'rp' is hardware writing index Signed-off-by: -
Ping-Ke Shih authored
PCI rings are used to DMA TX/RX packets. The address of WiFi 7 chips are different from previous ones, so add them according to hardware design. Another difference is that driver doesn't need to configure BD (buffer descriptor) RAM table, which is used by hardware to fetch BD ahead before fetching whole TX data. A TX ring contains numbers of TX BD (e.g. 512): TX BD (buffer descriptor; continual memory) +---+---+---+---+ +---+ | | | | | ... | | +-|-+---+---+---+ +---+ | | point to TX WD (WiFi descriptor; metadata of a skb data) v +------+ | | | | +-|----+ | | point to a skb data v +------+ | | | | +------+ Signed-off-by: -
Ping-Ke Shih authored
8922AE is a PCIE 802.11be wireless adapter with PID 0x8922. We add basic configurations including PCI DMA mode, PCI parameters, register address to control TX/RX rings and etc. Signed-off-by:
-
Dmitry Antipov authored
Since 'rtw89_core_tx_kick_off_and_wait()' assumes timeout (actually RTW89_ROC_TX_TIMEOUT) in milliseconds, I suppose that RTW89_ROC_IDLE_TIMEOUT is in milliseconds as well. If so, 'msecs_to_jiffies()' should be used in a call to 'ieee80211_queue_delayed_work()' from 'rtw89_roc_end()'. Compile tested only. Signed-off-by:
-
Dmitry Antipov authored
For rtl8192ee, change 'rtl92ee_dm_dynamic_primary_cca_ckeck()' to 'rtl92ee_dm_dynamic_primary_cca_check()' and so adjust 'rtl92ee_dm_watchdog()' as well. Compile tested only. Signed-off-by:
-
Dmitry Antipov authored
Remove unused and read by otherwise unused 'h2c_box_num', 'rfpienable', 'reserve_0', 'reserve_1', 'iqk_in_progress', 'apk_done' and 'hw_rof_enable' fields of 'struct rtl_phy', adjust related code. Compile tested only. Signed-off-by:
-
Dmitry Antipov authored
Remove unused and set but otherwise unused 'bbrf_ready', 'external_pa', 'pa_mode', 'rx_tag', 'rts_en', 'wow_enable' and 'wow_enabled' fields of 'struct rtl_hal', adjust related code. Compile tested only. Signed-off-by:
-
Justin Stitt authored
Let's move away from using strncpy and instead use the more obvious interface for this context. For wlc->pub->srom_ccode, we're just copying two bytes from ccode into wlc->pub->srom_ccode with no expectation that srom_ccode be NUL-terminated: wlc->pub->srom_ccode is only used in regulatory_hint(): 1193 | if (wl->pub->srom_ccode[0] && 1194 | regulatory_hint(wl->wiphy, wl->pub->srom_ccode)) 1195 | wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__); We can see that only index 0 and index 1 are accessed. 3307 | int regulatory_hint(struct wiphy *wiphy, const char *alpha2) 3308 | { ... | ... 3322 | request->alpha2[0] = alpha2[0]; 3323 | request->alpha2[1] = alpha2[1]; ... | ... 3332 | } Since this is just a simple byte copy with correct lengths, let's use memcpy(). There should be no functional change. In a similar boat, both wlc->country_default and wlc->autocountry_default are just simple byte copies so let's use memcpy. However, FWICT they aren't used anywhere. (they should be used or removed -- not in scope of my patch, though). Signed-off-by:Kees Cook <keescook@chromium.org> Signed-off-by:
-
Justin Stitt authored
Let's move away from using strncpy and instead favor a less ambiguous and more robust interface. For ifp->ndev->name, we expect ifp->ndev->name to be NUL-terminated based on its use in format strings within core.c: 67 | char *brcmf_ifname(struct brcmf_if *ifp) 68 | { 69 | if (!ifp) 70 | return "<if_null>"; 71 | 72 | if (ifp->ndev) 73 | return ifp->ndev->name; 74 | 75 | return "<if_none>"; 76 | } ... 288 | static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, 289 | struct net_device *ndev) { ... 330 | brcmf_dbg(INFO, "%s: insufficient headroom (%d)\n", 331 | brcmf_ifname(ifp), head_delta); ... 336 | bphy_err(drvr, "%s: failed to expand headroom\n", 337 | brcmf_ifname(ifp)); For di->name, we expect di->name to be NUL-terminated based on its usage with format strings: | brcms_dbg_dma(di->core, | "%s: DMA64 tx doesn't have AE set\n", | di->name); Looking at its allocation we can see that it is already zero-allocated which means NUL-padding is not required: | di = kzalloc(sizeof(struct dma_info), GFP_ATOMIC); For wlc->modulecb[i].name, we expect each name in wlc->modulecb to be NUL-terminated based on their usage with strcmp(): | if (!strcmp(wlc->modulecb[i].name, name) && NUL-padding is not required as wlc is zero-allocated in: brcms_c_attach_malloc() -> | wlc = kzalloc(sizeof(struct brcms_c_info), GFP_ATOMIC); For all these cases, a suitable replacement is `strscpy` due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Signed-off-by:
-
- 27 Oct, 2023 14 commits
-
-
Bagas Sanjaya authored
Messages submitted to the ML bounce (address not found error). In fact, the ML was mistagged as person maintainer instead of mailing list. Remove the ML to keep Cc: lists a bit shorter and not to spam everyone's inbox with postmaster notifications. Signed-off-by:
Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231025130332.67995-2-bagasdotme@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jacob Keller says: ==================== Intel Wired LAN Driver Updates for 2023-10-25 (ice) This series extends the ice driver with basic support for the E830 device line. It does not include support for all device features, but enables basic functionality to load and pass traffic. Alice adds the 200G speed and PHY types supported by E830 hardware. Dan extends the DDP package logic to support the E830 package segment. Paul adds the basic registers and macros used by E830 hardware, and adds support for handling variable length link status information from firmware. Pawel removes some redundant zeroing of the PCI IDs list, and extends the list to include the E830 device IDs. ==================== Link: https://lore.kernel.org/r/20231025214157.1222758-1-jacob.e.keller@intel.comSigned-off-by:
-
Pawel Chmielewski authored
As the previous patches provide support for E830 hardware, add E830 specific IDs to the PCI device ID table, so these devices can now be probed by the kernel. Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by:
Paul Greenwalt <paul.greenwalt@intel.com> Tested-by:
Tony Brelinski <tony.brelinski@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-7-jacob.e.keller@intel.comSigned-off-by:
-
Pawel Chmielewski authored
Remove zeroing of the fields, as all the fields are in fact initialized with zeros automatically Reviewed-by:
-
Dan Nowlin authored
Add support for E830 DDP package segment. For the E830 package, signature buffers will not be included inline in the configuration buffers. Instead, the signature buffers will be located in a signature segment. Reviewed-by:
Dan Nowlin <dan.nowlin@intel.com> Co-developed-by:
-
Paul Greenwalt authored
The Get Link Status data length can vary with different versions of ice_aqc_get_link_status_data. Add ice_get_link_status_datalen() to return datalen for the specific ice_aqc_get_link_status_data version. Add new link partner fields to ice_aqc_get_link_status_data; PHY type, FEC, and flow control. Reviewed-by:
-
Alice Michael authored
Add the support for 200G phy speeds and the mapping for their advertisement in link. Add the new PHY type bits for AQ command, as needed for 200G E830 controllers. Signed-off-by:
Alice Michael <alice.michael@intel.com> Co-developed-by:
-
Paul Greenwalt authored
E830 is the 200G NIC family which uses the ice driver. Add specific E830 registers. Embed macros to use proper register based on (hw)->mac_type & name those macros to [ORIGINAL]_BY_MAC(hw). Registers only available on one of the macs will need to be explicitly referred to as E800_NAME instead of just NAME. PTP is not yet supported. Co-developed-by:
Milena Olech <milena.olech@intel.com> Signed-off-by:
Scott Taylor <scott.w.taylor@intel.com> Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2023-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.7 The third, and most likely the last, features pull request for v6.7. Fixes all over and only few small new features. Major changes: iwlwifi - more Multi-Link Operation (MLO) work ath12k - QCN9274: mesh support ath11k - firmware-2.bin container file format support * tag 'wireless-next-2023-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (155 commits) wifi: ray_cs: Remove unnecessary (void*) conversions Revert "wifi: ath11k: call ath11k_mac_fils_discovery() without condition" wifi: ath12k: Introduce and use ath12k_sta_to_arsta() wifi: ath12k: fix htt mlo-offset event locking wifi: ath12k: fix dfs-radar and temperature event locking wifi: ath11k: fix gtk offload status event locking wifi: ath11k: fix htt pktlog locking wifi: ath11k: fix dfs radar event locking wifi: ath11k: fix temperature event locking wifi: ath12k: rename the sc naming convention to ab wifi: ath12k: rename the wmi_sc naming convention to wmi_ab wifi: ath11k: add firmware-2.bin support wifi: ath11k: qmi: refactor ath11k_qmi_m3_load() wifi: rtw89: cleanup firmware elements parsing wifi: rt2x00: rework MT7620 PA/LNA RF calibration wifi: rt2x00: rework MT7620 channel config function wifi: rt2x00: improve MT7620 register initialization MAINTAINERS: wifi: rt2x00: drop Helmut Schaa wifi: wlcore: main: replace deprecated strncpy with strscpy wifi: wlcore: boot: replace deprecated strncpy with strscpy ... ==================== Link: https://lore.kernel.org/r/20231026090411.B2426C433CB@smtp.kernel.orgSigned-off-by:
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2023-10-26 We've added 51 non-merge commits during the last 10 day(s) which contain a total of 75 files changed, 5037 insertions(+), 200 deletions(-). The main changes are: 1) Add open-coded task, css_task and css iterator support. One of the use cases is customizable OOM victim selection via BPF, from Chuyi Zhou. 2) Fix BPF verifier's iterator convergence logic to use exact states comparison for convergence checks, from Eduard Zingerman, Andrii Nakryiko and Alexei Starovoitov. 3) Add BPF programmable net device where bpf_mprog defines the logic of its xmit routine. It can operate in L3 and L2 mode, from Daniel Borkmann and Nikolay Aleksandrov. 4) Batch of fixes for BPF per-CPU kptr and re-enable unit_size checking for global per-CPU allocator, from Hou Tao. 5) Fix libbpf which eagerly assumed that SHT_GNU_verdef ELF section was going to be present whenever a binary has SHT_GNU_versym section, from Andrii Nakryiko. 6) Fix BPF ringbuf correctness to fold smp_mb__before_atomic() into atomic_set_release(), from Paul E. McKenney. 7) Add a warning if NAPI callback missed xdp_do_flush() under CONFIG_DEBUG_NET which helps checking if drivers were missing the former, from Sebastian Andrzej Siewior. 8) Fix missed RCU read-lock in bpf_task_under_cgroup() which was throwing a warning under sleepable programs, from Yafang Shao. 9) Avoid unnecessary -EBUSY from htab_lock_bucket by disabling IRQ before checking map_locked, from Song Liu. 10) Make BPF CI linked_list failure test more robust, from Kumar Kartikeya Dwivedi. 11) Enable samples/bpf to be built as PIE in Fedora, from Viktor Malik. 12) Fix xsk starving when multiple xsk sockets were associated with a single xsk_buff_pool, from Albert Huang. 13) Clarify the signed modulo implementation for the BPF ISA standardization document that it uses truncated division, from Dave Thaler. 14) Improve BPF verifier's JEQ/JNE branch taken logic to also consider signed bounds knowledge, from Andrii Nakryiko. 15) Add an option to XDP selftests to use multi-buffer AF_XDP xdp_hw_metadata and mark used XDP programs as capable to use frags, from Larysa Zaremba. 16) Fix bpftool's BTF dumper wrt printing a pointer value and another one to fix struct_ops dump in an array, from Manu Bretelle. * tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (51 commits) netkit: Remove explicit active/peer ptr initialization selftests/bpf: Fix selftests broken by mitigations=off samples/bpf: Allow building with custom bpftool samples/bpf: Fix passing LDFLAGS to libbpf samples/bpf: Allow building with custom CFLAGS/LDFLAGS bpf: Add more WARN_ON_ONCE checks for mismatched alloc and free selftests/bpf: Add selftests for netkit selftests/bpf: Add netlink helper library bpftool: Extend net dump with netkit progs bpftool: Implement link show support for netkit libbpf: Add link-based API for netkit tools: Sync if_link uapi header netkit, bpf: Add bpf programmable net device bpf: Improve JEQ/JNE branch taken logic bpf: Fold smp_mb__before_atomic() into atomic_set_release() bpf: Fix unnecessary -EBUSY from htab_lock_bucket xsk: Avoid starving the xsk further down the list bpf: print full verifier states on infinite loop detection selftests/bpf: test if state loops are detected in a tricky case bpf: correct loop detection for iterators convergence ... ==================== Link: https://lore.kernel.org/r/20231026150509.2824-1-daniel@iogearbox.netSigned-off-by: -
Alexey Makhalov authored
Deep has decided to transfer the maintainership of the VMware virtual PTP clock driver (ptp_vmw) to Jeff. Update the MAINTAINERS file to reflect this change. Signed-off-by:
Alexey Makhalov <amakhalov@vmware.com> Acked-by:
Deep Shah <sdeep@vmware.com> Acked-by:
Jeff Sipek <jsipek@vmware.com> Link: https://lore.kernel.org/r/20231025231931.76842-1-amakhalov@vmware.comSigned-off-by:
-
Michael Chan authored
The recent firmware interface change has added 2 counters in struct rx_port_stats_ext. This caused 2 stray ethtool counters to be displayed. Since new counters are added from time to time, fix it so that the ethtool logic will only display up to the maximum known counters. These 2 counters are not used by production firmware yet. Fixes: 754fbf60 ("bnxt_en: Update firmware interface to 1.10.2.171") Reviewed-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231026013231.53271-1-michael.chan@broadcom.comSigned-off-by:
-
Jakub Kicinski authored
Davide reports that we look for the attr-cnt-name in the wrong object. We try to read it from the family, but the schema only allows for it to exist at attr-set level. Reported-by:
Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/all/CAKa-r6vCj+gPEUKpv7AsXqM77N6pB0evuh7myHq=585RA3oD5g@mail.gmail.com/Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231025182739.184706-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Page pool code is compiled conditionally, but the operations are part of the shared netlink family. We can handle this by reporting empty list of pools or -EOPNOTSUPP / -ENOSYS but the cleanest way seems to be removing the ops completely at compilation time. That way user can see that the page pool ops are not present using genetlink introspection. Same way they'd check if the kernel is "new enough" to support the ops. Extend the specs with the ability to specify the config condition under which op (and its policies, etc.) should be hidden. Reviewed-by:
-
- 26 Oct, 2023 8 commits
-
-
Jakub Kicinski authored
struct nla_policy is usually constant itself, but unless we make the ranges inside constant we won't be able to make range structs const. The ranges are not modified by the core. Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
David Ahern <dsahern@kernel.org> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
-
Przemek Kitszel authored
Avoid use of uninitialized state variable. In case of mlx5e_tx_reporter_build_diagnose_output_sq_common() it's better to still collect other data than bail out entirely. Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/netdev/8bd30131-c9f2-4075-a575-7fa2793a1760@moroto.mountain Fixes: d17f98bf ("net/mlx5: devlink health: use retained error fmsg API") Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://lore.kernel.org/r/20231025145050.36114-1-przemyslaw.kitszel@intel.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. Conflicts: net/mac80211/rx.c 91535613 ("wifi: mac80211: don't drop all unprotected public action frames") 6c02fab7 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value") Adjacent changes: drivers/net/ethernet/apm/xgene/xgene_enet_main.c 61471264 ("net: ethernet: apm: Convert to platform remove callback returning void") d2ca43f3 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF") net/vmw_vsock/virtio_transport.c 64c99d2d ("vsock/virtio: support to send non-linear skb") 53b08c49 ("vsock/virtio: initialize the_virtio_vsock before using VQs") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and netfilter. Most regressions addressed here come from quite old versions, with the exceptions of the iavf one and the WiFi fixes. No known outstanding reports or investigation. Fixes to fixes: - eth: iavf: in iavf_down, disable queues when removing the driver Previous releases - regressions: - sched: act_ct: additional checks for outdated flows - tcp: do not leave an empty skb in write queue - tcp: fix wrong RTO timeout when received SACK reneging - wifi: cfg80211: pass correct pointer to rdev_inform_bss() - eth: i40e: sync next_to_clean and next_to_process for programming status desc - eth: iavf: initialize waitqueues before starting watchdog_task Previous releases - always broken: - eth: r8169: fix data-races - eth: igb: fix potential memory leak in igb_add_ethtool_nfc_entry - eth: r8152: avoid writing garbage to the adapter's registers - eth: gtp: fix fragmentation needed check with gso" * tag 'net-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits) iavf: in iavf_down, disable queues when removing the driver vsock/virtio: initialize the_virtio_vsock before using VQs net: ipv6: fix typo in comments net: ipv4: fix typo in comments net/sched: act_ct: additional checks for outdated flows netfilter: flowtable: GC pushes back packets to classic path i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR gtp: fix fragmentation needed check with gso gtp: uapi: fix GTPA_MAX Fix NULL pointer dereference in cn_filter() sfc: cleanup and reduce netlink error messages net/handshake: fix file ref count in handshake_nl_accept_doit() wifi: mac80211: don't drop all unprotected public action frames wifi: cfg80211: fix assoc response warning on failed links wifi: cfg80211: pass correct pointer to rdev_inform_bss() isdn: mISDN: hfcsusb: Spelling fix in comment tcp: fix wrong RTO timeout when received SACK reneging r8152: Block future register access if register access fails r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en() ... -
Nikolay Aleksandrov authored
Remove the explicit NULLing of active/peer pointers and rely on the implicit one done at net device allocation. Suggested-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
-
Yafang Shao authored
When we configure the kernel command line with 'mitigations=off' and set the sysctl knob 'kernel.unprivileged_bpf_disabled' to 0, the commit bc5bc309 ("bpf: Inherit system settings for CPU security mitigations") causes issues in the execution of `test_progs -t verifier`. This is because 'mitigations=off' bypasses Spectre v1 and Spectre v4 protections. Currently, when a program requests to run in unprivileged mode (kernel.unprivileged_bpf_disabled = 0), the BPF verifier may prevent it from running due to the following conditions not being enabled: - bypass_spec_v1 - bypass_spec_v4 - allow_ptr_leaks - allow_uninit_stack While 'mitigations=off' enables the first two conditions, it does not enable the latter two. As a result, some test cases in 'test_progs -t verifier' that were expected to fail to run may run successfully, while others still fail but with different error messages. This makes it challenging to address them comprehensively. Moreover, in the future, we may introduce more fine-grained control over CPU mitigations, such as enabling only bypass_spec_v1 or bypass_spec_v4. Given the complexity of the situation, rather than fixing each broken test case individually, it's preferable to skip them when 'mitigations=off' is in effect and introduce specific test cases for the new 'mitigations=off' scenario. For instance, we can introduce new BTF declaration tags like '__failure__nospec', '__failure_nospecv1' and '__failure_nospecv4'. In this patch, the approach is to simply skip the broken test cases when 'mitigations=off' is enabled. The result of `test_progs -t verifier` as follows after this commit, Before this commit ================== - without 'mitigations=off' - kernel.unprivileged_bpf_disabled = 2 Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED - kernel.unprivileged_bpf_disabled = 0 Summary: 74/1336 PASSED, 0 SKIPPED, 0 FAILED <<<< - with 'mitigations=off' - kernel.unprivileged_bpf_disabled = 2 Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED - kernel.unprivileged_bpf_disabled = 0 Summary: 63/1276 PASSED, 0 SKIPPED, 11 FAILED <<<< 11 FAILED After this commit ================= - without 'mitigations=off' - kernel.unprivileged_bpf_disabled = 2 Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED - kernel.unprivileged_bpf_disabled = 0 Summary: 74/1336 PASSED, 0 SKIPPED, 0 FAILED <<<< - with this patch, with 'mitigations=off' - kernel.unprivileged_bpf_disabled = 2 Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED - kernel.unprivileged_bpf_disabled = 0 Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED <<<< SKIPPED Fixes: bc5bc309 ("bpf: Inherit system settings for CPU security mitigations") Reported-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
Yonghong Song <yonghong.song@linux.dev> Closes: https://lore.kernel.org/bpf/CAADnVQKUBJqg+hHtbLeeC2jhoJAWqnmRAzXW3hmUCNSV9kx4sQ@mail.gmail.com Link: https://lore.kernel.org/bpf/20231025031144.5508-1-laoar.shao@gmail.com
-
Viktor Malik authored
samples/bpf build its own bpftool boostrap to generate vmlinux.h as well as some BPF objects. This is a redundant step if bpftool has been already built, so update samples/bpf/Makefile such that it accepts a path to bpftool passed via the BPFTOOL variable. The approach is practically the same as tools/testing/selftests/bpf/Makefile uses. Signed-off-by:
Viktor Malik <vmalik@redhat.com> Signed-off-by:
-
Viktor Malik authored
samples/bpf/Makefile passes LDFLAGS=$(TPROGS_LDFLAGS) to libbpf build without surrounding quotes, which may cause compilation errors when passing custom TPROGS_USER_LDFLAGS. For example: $ make -C samples/bpf/ TPROGS_USER_LDFLAGS="-Wl,--as-needed -specs=/usr/lib/gcc/x86_64-redhat-linux/13/libsanitizer.spec" make: Entering directory './samples/bpf' make -C ../../ M=./samples/bpf BPF_SAMPLES_PATH=./samples/bpf make[1]: Entering directory '.' make -C ./samples/bpf/../../tools/lib/bpf RM='rm -rf' EXTRA_CFLAGS="-Wall -O2 -Wmissing-prototypes -Wstrict-prototypes -I./usr/include -I./tools/testing/selftests/bpf/ -I./samples/bpf/libbpf/include -I./tools/include -I./tools/perf -I./tools/lib -DHAVE_ATTR_TEST=0" \ LDFLAGS=-Wl,--as-needed -specs=/usr/lib/gcc/x86_64-redhat-linux/13/libsanitizer.spec srctree=./samples/bpf/../../ \ O= OUTPUT=./samples/bpf/libbpf/ DESTDIR=./samples/bpf/libbpf prefix= \ ./samples/bpf/libbpf/libbpf.a install_headers make: invalid option -- 'c' make: invalid option -- '=' make: invalid option -- '/' make: invalid option -- 'u' make: invalid option -- '/' [...] Fix the error by properly quoting $(TPROGS_LDFLAGS). Suggested-by:Donald Zickus <dzickus@redhat.com> Signed-off-by:
-
