The TUN can be used as vhost-net backend. E.g, the tun_net_xmit() is the
interface to forward the skb from TUN to vhost-net/virtio-net.

However, there are many "goto drop" in the TUN driver. Therefore, the
kfree_skb_reason() is involved at each "goto drop" to help userspace
ftrace/ebpf to track the reason for the loss of packets.

The below reasons are introduced:

- SKB_DROP_REASON_DEV_READY
- SKB_DROP_REASON_NOMEM
- SKB_DROP_REASON_HDR_TRUNC
- SKB_DROP_REASON_TAP_FILTER
- SKB_DROP_REASON_TAP_TXFILTER

Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No functional change.

Just to split the if statement into different conditions to use
kfree_skb_reason() to trace the reason later.

Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TAP can be used as vhost-net backend. E.g., the tap_handle_frame() is
the interface to forward the skb from TAP to vhost-net/virtio-net.

However, there are many "goto drop" in the TAP driver. Therefore, the
kfree_skb_reason() is involved at each "goto drop" to help userspace
ftrace/ebpf to track the reason for the loss of packets.

The below reasons are introduced:

- SKB_DROP_REASON_SKB_CSUM
- SKB_DROP_REASON_SKB_GSO_SEG
- SKB_DROP_REASON_SKB_UCOPY_FAULT
- SKB_DROP_REASON_DEV_HDR
- SKB_DROP_REASON_FULL_RING

Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit a505cce6.

Leon says:
  We already discussed that. SMC should be changed to use
  RDMA CQ pool API
  drivers/infiniband/core/cq.c.
  ib_poll_handler() has much better implementation (tracing,
  IRQ rescheduling, proper error handling) than this SMC variant.

Since we will switch to ib_poll_handler() in the future,
revert this patch.

Link: https://lore.kernel.org/netdev/20220301105332.GA9417@linux.alibaba.com/Suggested-by: Leon Romanovsky <leon@kernel.org>
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Updates.

This patch series contains mainly NVRAM related features.  More
NVRAM error checking and logging are added when installing firmware
packages.  A new devlink hw health report is now added to report
and diagnose NVRAM issues.  Other miscellaneous patches include
reporting correctly cards that don't support link pause, adding
an internal unknown link state, and avoiding unnecessary link
toggle during firmware reset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an NVM test function for devlink hw reporter.
In this function an NVM VPD area is read followed by
a write. Test result is cached and if it is successful then
the next test can be conducted only after HW_RETEST_MIN_TIME to
avoid frequent writes to the NVM.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reporter will report NVM errors which are non-fatal.
When we receive these NVM error events, we'll report it
through this new hw health reporter.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Health reporter state should be maintained over resets. Previously
reporters were destroyed if the device capabilities changed, but
since none of the reporters depend on capabilities anymore, this
logic should be removed.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the flow control settings have been changed, a subsequent FW reset
may cause the ethernet link to toggle unnecessarily.  This link toggle
will increase the down time by a few seconds.

The problem is caused by bnxt_update_phy_setting() detecting a false
mismatch in the flow control settings between the stored software
settings and the current FW settings after the FW reset.  This mismatch
is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an
inconsistent way in bnxt_set_pauseparam() in autoneg mode.  The AUTONEG
bit should not be added to link_info->req_flow_ctrl.
Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some cards are configured to never support link pause or PFC.  Discover
these cards and properly report no pause support to ethtool.  Disable
PFC settings from DCBNL if PFC is unsupported.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will force link state to always be logged for initial NIC open.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of always returning -ENOPKG, decode the firmware error
code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails.
Return a more suitable error code to userspace and log an error
in dmesg.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

FW returns error code "NVM_INSTALL_UPDATE_CMD_ERR_CODE_ANTI_ROLLBACK"
in the response to indicate that HWRM_NVM_INSTALL_UPDATE command has
failed due to Anti-rollback feature. Parse the error and return an
appropriate error code to the user.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is in anticipation of handling more "cmd_err" from FW in the next
patch.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Robert Hancock says:

====================
NAPI/GRO support for axienet driver

Add support for NAPI and GRO receive in the Xilinx AXI Ethernet driver,
and some other related cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the ability to configure the RX/TX coalesce timer with ethtool.
Change default setting to scale with the clock rate rather than being a
fixed number of clock cycles.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that NAPI has been implemented, the hardware interrupt mitigation
mechanism is not needed to avoid excessive interrupt load in most cases.
Reduce the default RX interrupt threshold to 1 to reduce introduced
latency. This can be increased with ethtool if desired if some applications
still want to reduce interrupts.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement NAPI and GRO receive. In addition to better performance, this
also avoids handling RX packets in hard IRQ context, which reduces the
IRQ latency impact to other devices.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the RX or TX coalesce count is set to 1, there's no point in
setting the delay timer value since an interrupt will already be raised
on every packet, and the delay interrupt just causes extra pointless
interrupts.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify the DMA error handling process, and remove some duplicated code
between the DMA error handling and the stop function.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using lp->ndev.parent to find the correct device to use for
DMA API calls, just use the dev attribute in the device structure.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a memory allocation error occurred during an attempt to refill a slot
in the RX ring after the packet was received, the hardware tail pointer
would still have been updated to point to or past the slot which remained
marked as previously completed. This would likely result in the DMA engine
raising an error when it eventually tried to use that slot again.

If a slot cannot be refilled, then just stop processing and do not move
the tail pointer past it. On the next attempt, we should skip receiving
the packet from the empty slot and just try to refill it again.

This failure mode has not actually been observed, but was found as part
of other driver updates.

Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Luiz Angelo Daros de Luca says:

====================
net: dsa: realtek: add rtl8_4t tag

This patch series adds support for rtl8_4t tag. It is a variant of
rtl8_4 tag, with identical values but placed at the end of the packet
(before CRC).

It forces checksum in software before adding the tag as those extra
bytes at the end of the packet would be summed together with the rest of
the payload. When the switch removes the tag before sending the packet
to the network, that checksum will not match.

It might be useful to diagnose or avoid checksum offload issues. With an
ethertype tag like rtl8_4, the cpu port ethernet driver must work with
cksum_start and chksum_offset to correctly calculate checksums. If not,
the checksum field will be broken (it will contain the fake ip header
sum).  In those cases, using 'rtl8_4t' might be an alternative way to
avoid checksum offload, either using runtime or device-tree property.

Regards,

Luiz

v4-v5)
- tags in alphabetical order in dsa_port.yaml
- remove ret var from rtl8365mb_change_tag_protocol
- Comment typos fixes

v3-v4)
- added rtl8_4 and rtl8_4t to dsa_port.yaml
- removed generic considerations about checksum problems with DSA tags.
  They belong to Documentation/networking/dsa/dsa.rst

v2-v3)
- updated tag documentation (file header)
- do not remove position and format from rtl8365mb_cpu
- reinstate cpu to rtl8365mb
- moved rtl8365mb_change_tag_protocol after rtl8365mb_cpu_config
- do not modify rtl8365mb_cpu_config() logic
- remove cpu arg from rtl8365mb_cpu_config(); get it from priv
- dropped tag_protocol from rtl8365mb. It is now derived from
  cpu->position.
- init cpu struct before dsa_register as default tag must be already
  defined before dsa_register()
- fix formatting issues

v1-v2)
- remove mention to tail tagger, use trailing tagger.
- use void* instead of char* for pointing to tag beginning
- use memcpy to avoid problems with unaligned tags
- calculate checksum if it still pending
- keep in-use tag protocol in memory instead of reading from switch
  register
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The trailing tag is also supported by this family. The default is still
rtl8_4 but now the switch supports changing the tag to rtl8_4t.

Reintroduce the dropped cpu in struct rtl8365mb (removed by 6147631c).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Realtek switches supports the same tag both before ethertype or between
payload and the CRC.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Realtek rtl8365mb DSA driver can use these two tag formats.

Cc: devicetree@vger.kernel.org
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Selftest refinements and a new test

Patches 1 and 11 improve the printed output of the mptcp_join.sh
selftest.

Patches 2-8 add a test for the MP_FASTCLOSE option, including
prerequisite changes like additional MPTCP MIBs.

Patches 9-10 add some groundwork for upcoming tests.
====================

Link: https://lore.kernel.org/r/20220304193636.219315-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch updated the output info of chk_rm_nr. Renamed 'sf' to 'rmsf',
which means 'remove subflow'. Added the display of whether the inverted
namespaces has been used to check the mib counters.

The new output looks like this:

 002 remove multiple subflows          syn[ ok ] - synack[ ok ] - ack[ ok ]
                                       rm [ ok ] - rmsf  [ ok ]
 003 remove single address             syn[ ok ] - synack[ ok ] - ack[ ok ]
                                       add[ ok ] - echo  [ ok ]
                                       rm [ ok ] - rmsf  [ ok ]   invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added five more arguments for chk_join_nr(). The default
values of them are all zero.

The first two, csum_ns1 and csum_ns1, are passed to chk_csum_nr(), to
check the mib counters of the checksum errors in ns1 and ns2. A '+'
can be added into this two arguments to represent that multiple
checksum errors are allowed when doing this check. For example,

        chk_csum_nr "" +2 +2

indicates that two or more checksum errors are allowed in both ns1 and
ns2.

The remaining two, fail_nr and rst_nr, are passed to chk_fail_nr() and
chk_rst_nr() respectively, to check the sending and receiving mib
counters of MP_FAIL and MP_RST.

Also did some cleanups in chk_fail_nr(), renamed two local variables
and updated the output message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added the invert bytes check for the output data in
check_transfer().

Instead of the file mismatch error:

  [ FAIL ] file received by server does not match (in, out):
  -rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.9xpM6Paivv
  Trailing bytes are:
  MPTCP_TEST_FILE_END_MARKER
  -rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.wnz1Yp4u7Z
  Trailing bytes are:
  MPTCP_TEST_FILE_END_MARKER

Print out the inverted bytes like this:

  file received by server has inverted byte at 7454789
  file received by server has inverted byte at 7454790
  file received by server has inverted byte at 7454791
  file received by server has inverted byte at 7454792
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added the self test for MP_FASTCLOSE. Reused the argument
addr_nr_ns2 of do_transfer() to pass the extra arguments '-I 2' to
mptcp_connect commands. Then mptcp_connect disconnected the
connections to trigger the MP_FASTCLOSE sending and receiving. Used
chk_fclose_nr to check the MP_FASTCLOSE mibs and used chk_rst_nr to
check the MP_RST mibs. This test used the test_linkfail value to make
1024KB test files.

The output looks like this:

Created /tmp/tmp.XB8sfv1hJ0 (size 1024 KB) containing data sent by client
Created /tmp/tmp.RtTDbzqrXI (size 1024 KB) containing data sent by server
001 fastclose test                syn[ ok ] - synack[ ok ] - ack[ ok ]
                                  ctx[ ok ] - fclzrx[ ok ]
                                  rtx[ ok ] - rstrx [ ok ]   invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch reused the test_linkfail values above 2 to make test files with
the given sizes (KB) for both the client side and the server side. It's
useful for the test cases using different file sizes.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of using a global variable mptcp_connect, this patch added
a new local variable extra_args in do_transfer() to store the extra
arguments passing to the mptcp_connect commands.

This patch also renamed the speed level 'least' to 'speed_*'. This
more flexible way can avoid the need to add new speed levels in the
future.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added a new function chk_rst_nr() to check the numbers
of the MP_RST sending and receiving mibs.

Showed in the output whether the inverted namespaces check order is used.
Since if we pass -Cz to mptcp_join.sh, the MP_RST information is showed
twice.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added two more mibs for MP_RST, MPTCP_MIB_MPRSTTX for
the MP_RST sending and MPTCP_MIB_MPRSTRX for the MP_RST receiving.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added a new function chk_fclose_nr() to check the numbers
of the MP_FASTCLOSE sending and receiving mibs.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch added two more mibs for MP_FASTCLOSE, MPTCP_MIB_MPFASTCLOSETX
for the MP_FASTCLOSE sending and MPTCP_MIB_MPFASTCLOSERX for receiving.

Also added a debug log for MP_FASTCLOSE receiving, printed out the recv_key
of MP_FASTCLOSE in mptcp_parse_option to show that MP_RST is received.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The number of self tests in mptcp_join.sh will soon be more than 100, the
output alignment is no longer OK. This patch adjusted it.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on
static allocation of IRQ resources in DT core code, this
causes an issue when using hierarchical interrupt domains
using "interrupts" property in the node as this bypassed
the hierarchical setup and messed up the irq chaining.

In preparation for removal of static setup of IRQ resource
from DT core code use platform_get_irq().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220303100815.25605-1-tangmeng@uniontech.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On the debug summary page, show the /dev/ttyS<port> mapping.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220304054615.1737-1-jonathan.lemon@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>