- 08 Dec, 2009 1 commit
-
-
Justin P. Mattock authored
This is an updated patch for the Apple iMac 9,1 model to add sound. Original patch posted here: http://article.gmane.org/gmane.linux.alsa.devel/61361/match= I have been using this patch for a while now and have to say it works vary well, except for a few minor things: With the iMac 24-inch 3.06GHz Intel Core 2 Duo everything seems to be working as it should, although I have not looked into the microphone (never really use one, nor have any apps to test, my guess is it doesn't work, or I never figured out how to get it to work). With the iMac 24-inch 2.66GHz Intel Core 2 Duo everything is the same as with the above machine except I'm hearing a light scratchy/distortion noise come out of the speakers when using headphones(above machine does not do this). Other than that the sound level is great(especially with good Dj headphones). Signed-off-by:
Justin P. Mattock <justinmattock@gmail.com> Tested-by:
Takashi Iwai <tiwai@suse.de>
-
- 03 Dec, 2009 2 commits
-
-
Takashi Iwai authored
The previous hack for replacing the codec name give memory leaks at error paths. This patch fixes them. Signed-off-by: -
Kailang Yang authored
Fixed List: 1. Add alc_read_coef_idx function 2. Add ALC661 ALC259 3. Add ALC892 ALC888VD Signed-off-by:
Kailang Yang <kailang@realtek.com.tw> Signed-off-by:
-
- 01 Dec, 2009 4 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Takashi Iwai authored
HP dv3 requires position_fix=1. Reference: Novell bnc#555935 https://bugzilla.novell.com/show_bug.cgi?id=555935Signed-off-by:
-
Takashi Iwai authored
FSC Amilo Pi 1505 has a buggy BIOS and doesn't set up the HP and speaker pins properly. Add the pinfix entry for that. Reference: Novell bnc#557403 https://bugzilla.novell.com/show_bug.cgi?id=557403Signed-off-by:
-
- 30 Nov, 2009 2 commits
-
-
Takashi Iwai authored
The NID 0x1a of Conexant 5047 chip is a mic boost volume only with the output amp unlike 5045 chip. Signed-off-by: -
Takashi Iwai authored
MSI Wind U115 seems to require position_fix=1 explicitly. Otherwise it screws up PulseAudio. Signed-off-by:
-
- 27 Nov, 2009 1 commit
-
-
Takashi Iwai authored
STAC/IDT codecs seem to behave weird when SET_PIN_SENSE verb is issued before reading the jack-detection although the TRIG_REQ pin capability is given by the hardware. Since snd_hda_jack_detect() issues the SET_PIN_SENSE verb simply judging from the pincap, we have to revert the change in the commit d56757ab ALSA: hda - Replace the rest of jack-detections with snd_hda_jack_detect() to plain GET_PIN_SENSE verb without triggering. Reported-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
- 26 Nov, 2009 1 commit
-
-
Daniel T Chen authored
BugLink: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4792 Cristian reported that these models have really bad sound above 6 dB and proposed the original patch. I've updated the comment to reflect this change. Signed-off-by:
Daniel T Chen <crimsun@ubuntu.com> Reported-by: Cristian Klein Signed-off-by:
-
- 24 Nov, 2009 2 commits
-
-
Einar Rünkaru authored
Dell Vostro 1015n uses Conexant CX20583-10Z (0x14f1:5067). Patch is based on "olpc-xo-1_5" branch. Dell uses digital mic. Signed-off-by:
Einar Rünkaru <einarry@smail.ee> Signed-off-by:
-
Takashi Iwai authored
This reverts commit f2624791. Łukasz Wojniłowicz reported that the change causes both internal and external mics not working any more. The headphone jacking issue was fixed by his previous patch, it's better to revert to acer-aspire-4930g model. Reported-by:
Łukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com> Signed-off-by:
-
- 21 Nov, 2009 1 commit
-
-
Takashi Iwai authored
CONFIG_SND_JACK needs to be selected explicitly only when INPUT=y or INPUT_SND. The current way, INPUT=SND_HDA_INTEL isn't strict enough. Reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
- 20 Nov, 2009 1 commit
-
-
Łukasz Wojniłowicz authored
Fixes first issue from comment 0021423 in bug 0004317 for Acer Aspire 5930g Signed-off-by:
-
- 19 Nov, 2009 1 commit
-
-
Takashi Iwai authored
Change the quirk for Acer Aspire 5930G from model=acer-aspire-4930g to model=acer-aspre-6530g. The tuba bass gets muted along with the other built-in speakers upon headphones insertion, the internal mic works perfectly etc. Reported-by:
Claudio Viano <claudio.viano@gmail.com> Signed-off-by:
-
- 18 Nov, 2009 13 commits
-
-
Takashi Iwai authored
The mute-LED isn't synchronized with the actual mute state on some HP laptops with IDT 92HD83xxx codecs. A similar hack using check_power_status callback is added for this codec, too. Signed-off-by: -
Takashi Iwai authored
The dual-headphone mode with STAC/IDT codecs is useful only for machines that have two (or more) built-in headphones. But, some HP laptops give multiple headphone pin configs, one for the built-in and another for the separate (likely a docking station) one. This results in a missing speaker volume control. This patch adds more check for the dual-headphone mode to avoid this problem. Signed-off-by: -
Takashi Iwai authored
Signed-off-by: -
Wu Fengguang authored
Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Wu Fengguang authored
Don't change channel count if not necessary. Signed-off-by:
-
Wu Fengguang authored
We tracked down the first-0.5s-hdmi-audio-samples-lost problem to the AC_VERB_SET_CHANNEL_STREAMID command. It is suspected that many HDMI sinks need some time to adapt to the new state. The workaround is to avoid changing stream id/format whenever possible. Proposed by David. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
Wu Fengguang authored
Remember the active infoframe, so as to avoid stop/restart infoframe transmission when switching between audio clips of the same format. Proposed by Shang and David. CC: Shane W <shane-alsa@csy.ca> CC: David Härdeman <david@hardeman.nu> Signed-off-by:
-
Wu Fengguang authored
And make it right when called for more than one times. Signed-off-by:
-
Wu Fengguang authored
This avoids lost of presence info on module reloading. The presence info used to be only updated at the (rare) hotplug events. Proposed by David, thanks! CC: David Härdeman <david@hardeman.nu> Signed-off-by:
-
Wu Fengguang authored
This helps merge duplicate code. v2: add snd_hda_jack_detect() and comments recommended by Takashi. Signed-off-by:
-
Wu Fengguang authored
Signed-off-by:
-
Wu Fengguang authored
Signed-off-by:
-
Wu Fengguang authored
Reported-by:
-
- 17 Nov, 2009 3 commits
-
-
Takashi Iwai authored
The ALC262 has a quirk entry matching with all Sony Vaio laptops to use model=sony-assamd as default. But, model=auto works much better for new models in the recent driver versions, thus it's safer to disable that default quirk entry. Signed-off-by: -
Takashi Iwai authored
-
Takashi Iwai authored
Vaio type G laptop doesn't work with the current quirk setup. After some tests, it turned out that it should be model=auto as default. Reported-by:
Mattia Dongili <malattia@linux.it> Signed-off-by:
-
- 16 Nov, 2009 8 commits
-
-
Takashi Iwai authored
Disable beep-related codes when CONFIG_SND_HDA_INPUT_BEEP isn't set. Signed-off-by: -
Takashi Iwai authored
The beep_mode option value was wrongly defined: it must be 0 = off and 1 = on. Also, evaluate the beep_mode value at snd_hda_attach_beep_device() properly so that no device is created when beep_mode=0 is given. Signed-off-by: -
Takashi Iwai authored
Signed-off-by: -
Jaroslav Kysela authored
The snd_hda_pcm_type_name array is local only. Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
-
Takashi Iwai authored
Signed-off-by: -
Takashi Iwai authored
Define a proper const for a magic 31bit flag for subdev / NID setup with a brief comment. Signed-off-by: -
Jaroslav Kysela authored
This patch adds support for dynamically created controls to proc codec file (Control: lines). Signed-off-by:
-
Jaroslav Kysela authored
This is an initial patch to show universal control<->NID assigment in proc codec file. The change helps to debug codec related problems. Signed-off-by:
-
