- 03 Jun, 2017 4 commits
-
-
Alexandre Belloni authored
ds1307->rtc->name is a copy of ds1307->name, use it instead. Signed-off-by:Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Alexandre Belloni authored
pcf8563->rtc->name is a copy of pcf8563_driver.driver.name, use it instead Signed-off-by: -
Alexandre Belloni authored
rtc->name is superfluous here because the rtc is already registered at that point and its name has already been printed. Signed-off-by: -
Alexandre Belloni authored
The name sysfs attribute is not useful in its current form because of all the drivers: - 3 are using the feature correctly - 2 are clearly misusing it - 60 are using driver.name, either directly or indirectly - 46 are using pdev->name - 8 are using client->name - 31 are using a variation of driver.name (addition or removal of rtc-, -rtc, _rtc, rtc_) Make it uniform and use the driver name and the device name. Signed-off-by:
-
- 31 May, 2017 8 commits
-
-
Mauro Carvalho Chehab authored
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - adjust identation of the titles; - mark a table as such; - don't capitalize chapter names. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Vaibhav Jain authored
In function __rtc_read_alarm() its possible for an alarm time-stamp to be invalid even after replacing missing components with current time-stamp. The condition 'alarm->time.tm_year < 70' will trigger this case and will cause the call to 'rtc_tm_to_time64(&alarm->time)' return a negative value for variable t_alm. While handling alarm rollover this negative t_alm (assumed to seconds offset from '1970-01-01 00:00:00') is converted back to rtc_time via rtc_time64_to_tm() which results in this error log with seemingly garbage values: "rtc rtc0: invalid alarm value: -2-1--1041528741 2005511117:71582844:32" This error was generated when the rtc driver (rtc-opal in this case) returned an alarm time-stamp of '00-00-00 00:00:00' to indicate that the alarm is disabled. Though I have submitted a separate fix for the rtc-opal driver, this issue may potentially impact other existing/future rtc drivers. To fix this issue the patch validates the alarm time-stamp just after filling up the missing datetime components and if rtc_valid_tm() still reports it to be invalid then bails out of the function without handling the rollover. Reported-by:
Steve Best <sbest@redhat.com> Signed-off-by:
Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by:
-
Vaibhav Jain authored
On PowerNV platform when Timed-Power-On(TPO) is disabled, read of stored TPO yields value with all date components set to '0' inside opal_get_tpo_time(). The function opal_to_tm() then converts it to an offset from year 1900 yielding alarm-time == "1900-00-01 00:00:00". This causes problems with __rtc_read_alarm() that expecting an offset from "1970-00-01 00:00:00" and returned alarm-time results in a -ve value for time64_t. Which ultimately results in this error reported in kernel logs with a seemingly garbage value: "rtc rtc0: invalid alarm value: -2-1--1041528741 2005511117:71582844:32" We fix this by explicitly handling the case of all alarm date-time components being '0' inside opal_get_tpo_time() and returning -ENOENT in such a case. This signals generic rtc that no alarm is set and it bails out from the alarm initialization flow without reporting the above error. Signed-off-by:
-
Gary Bisson authored
Some devices supported by the m41t80 driver have a programmable square-wave output signal (see M41T80_FEATURE_SQ). This enables to use this feature as a clock provider of common clock framework. Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by:
-
Gary Bisson authored
In order to use the proper clock framework to control this feature. Signed-off-by:
-
Gary Bisson authored
This patch is only relevant for RTC with the SQ_ALT feature which means the clock output frequency divider is stored in the weekday register. Current implementation discards the previous dividers value and clear them as soon as the time is set. Signed-off-by:
-
Gary Bisson authored
Currently setting an alarm clears the SQWE bit which means that the clock output is disabled no matter its previous state. Signed-off-by:
-
David Lowe authored
This patch extends the fixes for ds1337, ds1339, ds3231 in commit 8bc2a407 ("rtc: ds1307: add support for the DT property 'wakeup-source'") to mcp794xx devices, so that those parts can similarly be used as a wakeup source without an IRQ to the processor. Tested on Raspberry Pi ZeroW with MCP79400. Signed-off-by:
David Lowe <dave-lowe@ntlworld.com> Signed-off-by:
-
- 26 May, 2017 1 commit
-
-
Heiner Kallweit authored
This patch converts the ds1307 driver to using regmap. It's a rather big patch and I can test with DS3231 only. With this chip it's working fine. I'd appreciate if people with other supported hardware could test as well. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
- 13 May, 2017 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull some more input subsystem updates from Dmitry Torokhov: "An updated xpad driver with a few more recognized device IDs, and a new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads via SPI bus" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cros_ec_keyb - remove extraneous 'const' Input: add support for PlayStation 1/2 joypads connected via SPI Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth Input: xpad - sync supported devices with xboxdrv Input: xpad - sort supported devices by USB ID
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI/UBIFS updates from Richard Weinberger: - new config option CONFIG_UBIFS_FS_SECURITY - minor improvements - random fixes * tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs: ubi: Add debugfs file for tracking PEB state ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl ubifs: Remove unnecessary assignment ubifs: Fix cut and paste error on sb type comparisons ubi: fastmap: Fix slab corruption ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels ubi: Make mtd parameter readable ubi: Fix section mismatch
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML fixes from Richard Weinberger: "No new stuff, just fixes" * 'for-linus-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Add missing NR_CPUS include um: Fix to call read_initrd after init_bootmem um: Include kbuild.h instead of duplicating its macros um: Fix PTRACE_POKEUSER on x86_64 um: Set number of CPUs um: Fix _print_addr()
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, docs: update memory.stat description with workingset* entries mm: vmscan: scan until it finds eligible pages mm, thp: copying user pages must schedule on collapse dax: fix PMD data corruption when fault races with write dax: fix data corruption when fault races with write ext4: return to starting transaction in ext4_dax_huge_fault() mm: fix data corruption due to stale mmap reads dax: prevent invalidation of mapped DAX entries Tigran has moved mm, vmalloc: fix vmalloc users tracking properly mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin gcov: support GCC 7.1 mm, vmstat: Remove spurious WARN() during zoneinfo print time: delete current_fs_time() hwpoison, memcg: forcibly uncharge LRU pages
-
- 12 May, 2017 22 commits
-
-
Roman Gushchin authored
Commit 4b4cea91691d ("mm: vmscan: fix IO/refault regression in cache workingset transition") introduced three new entries in memory stat file: - workingset_refault - workingset_activate - workingset_nodereclaim This commit adds a corresponding description to the cgroup v2 docs. Link: http://lkml.kernel.org/r/1494530293-31236-1-git-send-email-guro@fb.comSigned-off-by:Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Minchan Kim authored
Although there are a ton of free swap and anonymous LRU page in elgible zones, OOM happened. balloon invoked oom-killer: gfp_mask=0x17080c0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOTRACK), nodemask=(null), order=0, oom_score_adj=0 CPU: 7 PID: 1138 Comm: balloon Not tainted 4.11.0-rc6-mm1-zram-00289-ge228d67e9677-dirty #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: oom_kill_process+0x21d/0x3f0 out_of_memory+0xd8/0x390 __alloc_pages_slowpath+0xbc1/0xc50 __alloc_pages_nodemask+0x1a5/0x1c0 pte_alloc_one+0x20/0x50 __pte_alloc+0x1e/0x110 __handle_mm_fault+0x919/0x960 handle_mm_fault+0x77/0x120 __do_page_fault+0x27a/0x550 trace_do_page_fault+0x43/0x150 do_async_page_fault+0x2c/0x90 async_page_fault+0x28/0x30 Mem-Info: active_anon:424716 inactive_anon:65314 isolated_anon:0 active_file:52 inactive_file:46 isolated_file:0 unevictable:0 dirty:27 writeback:0 unstable:0 slab_reclaimable:3967 slab_unreclaimable:4125 mapped:133 shmem:43 pagetables:1674 bounce:0 free:4637 free_pcp:225 free_cma:0 Node 0 active_anon:1698864kB inactive_anon:261256kB active_file:208kB inactive_file:184kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:532kB dirty:108kB writeback:0kB shmem:172kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no DMA free:7316kB min:32kB low:44kB high:56kB active_anon:8064kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15908kB mlocked:0kB slab_reclaimable:464kB slab_unreclaimable:40kB kernel_stack:0kB pagetables:24kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 992 992 1952 DMA32 free:9088kB min:2048kB low:3064kB high:4080kB active_anon:952176kB inactive_anon:0kB active_file:36kB inactive_file:0kB unevictable:0kB writepending:88kB present:1032192kB managed:1019388kB mlocked:0kB slab_reclaimable:13532kB slab_unreclaimable:16460kB kernel_stack:3552kB pagetables:6672kB bounce:0kB free_pcp:56kB local_pcp:24kB free_cma:0kB lowmem_reserve[]: 0 0 0 959 Movable free:3644kB min:1980kB low:2960kB high:3940kB active_anon:738560kB inactive_anon:261340kB active_file:188kB inactive_file:640kB unevictable:0kB writepending:20kB present:1048444kB managed:1010816kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:832kB local_pcp:60kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 1*4kB (E) 0*8kB 18*16kB (E) 10*32kB (E) 10*64kB (E) 9*128kB (ME) 8*256kB (E) 2*512kB (E) 2*1024kB (E) 0*2048kB 0*4096kB = 7524kB DMA32: 417*4kB (UMEH) 181*8kB (UMEH) 68*16kB (UMEH) 48*32kB (UMEH) 14*64kB (MH) 3*128kB (M) 1*256kB (H) 1*512kB (M) 2*1024kB (M) 0*2048kB 0*4096kB = 9836kB Movable: 1*4kB (M) 1*8kB (M) 1*16kB (M) 1*32kB (M) 0*64kB 1*128kB (M) 2*256kB (M) 4*512kB (M) 1*1024kB (M) 0*2048kB 0*4096kB = 3772kB 378 total pagecache pages 17 pages in swap cache Swap cache stats: add 17325, delete 17302, find 0/27 Free swap = 978940kB Total swap = 1048572kB 524157 pages RAM 0 pages HighMem/MovableOnly 12629 pages reserved 0 pages cma reserved 0 pages hwpoisoned [ pid ] uid tgid total_vm rss nr_ptes nr_pmds swapents oom_score_adj name [ 433] 0 433 4904 5 14 3 82 0 upstart-udev-br [ 438] 0 438 12371 5 27 3 191 -1000 systemd-udevd With investigation, skipping page of isolate_lru_pages makes reclaim void because it returns zero nr_taken easily so LRU shrinking is effectively nothing and just increases priority aggressively. Finally, OOM happens. The problem is that get_scan_count determines nr_to_scan with eligible zones so although priority drops to zero, it couldn't reclaim any pages if the LRU contains mostly ineligible pages. get_scan_count: size = lruvec_lru_size(lruvec, lru, sc->reclaim_idx); size = size >> sc->priority; Assumes sc->priority is 0 and LRU list is as follows. N-N-N-N-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H (Ie, small eligible pages are in the head of LRU but others are almost ineligible pages) In that case, size becomes 4 so VM want to scan 4 pages but 4 pages from tail of the LRU are not eligible pages. If get_scan_count counts skipped pages, it doesn't reclaim any pages remained after scanning 4 pages so it ends up OOM happening. This patch makes isolate_lru_pages try to scan pages until it encounters eligible zones's pages. [akpm@linux-foundation.org: clean up mind-bending `for' statement. Tweak comment text] Fixes: 3db65812 ("Revert "mm, vmscan: account for skipped pages as a partial scan"") Link: http://lkml.kernel.org/r/1494457232-27401-1-git-send-email-minchan@kernel.orgSigned-off-by:Minchan Kim <minchan@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
David Rientjes authored
We have encountered need_resched warnings in __collapse_huge_page_copy() while doing {clear,copy}_user_highpage() over HPAGE_PMD_NR source pages. mm->mmap_sem is held for write, but the iteration is well bounded. Reschedule as needed. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1705101426380.109808@chino.kir.corp.google.comSigned-off-by:David Rientjes <rientjes@google.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Ross Zwisler authored
This is based on a patch from Jan Kara that fixed the equivalent race in the DAX PTE fault path. Currently DAX PMD read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pmd_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add huge zero page to the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6e ("dax: Call ->iomap_begin without entry lock during dax fault") Link: http://lkml.kernel.org/r/20170510172700.18991-1-ross.zwisler@linux.intel.comSigned-off-by:Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jan Kara authored
Currently DAX read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pte_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add zero page in the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6e Link: http://lkml.kernel.org/r/20170510085419.27601-5-jack@suse.czSigned-off-by: -
Jan Kara authored
DAX will return to locking exceptional entry before mapping blocks for a page fault to fix possible races with concurrent writes. To avoid lock inversion between exceptional entry lock and transaction start, start the transaction already in ext4_dax_huge_fault(). Fixes: 9f141d6e Link: http://lkml.kernel.org/r/20170510085419.27601-4-jack@suse.czSigned-off-by:
-
Jan Kara authored
Currently, we didn't invalidate page tables during invalidate_inode_pages2() for DAX. That could result in e.g. 2MiB zero page being mapped into page tables while there were already underlying blocks allocated and thus data seen through mmap were different from data seen by read(2). The following sequence reproduces the problem: - open an mmap over a 2MiB hole - read from a 2MiB hole, faulting in a 2MiB zero page - write to the hole with write(3p). The write succeeds but we incorrectly leave the 2MiB zero page mapping intact. - via the mmap, read the data that was just written. Since the zero page mapping is still intact we read back zeroes instead of the new data. Fix the problem by unconditionally calling invalidate_inode_pages2_range() in dax_iomap_actor() for new block allocations and by properly invalidating page tables in invalidate_inode_pages2_range() for DAX mappings. Fixes: c6dcf52c Link: http://lkml.kernel.org/r/20170510085419.27601-3-jack@suse.czSigned-off-by:
-
Ross Zwisler authored
Patch series "mm,dax: Fix data corruption due to mmap inconsistency", v4. This series fixes data corruption that can happen for DAX mounts when page faults race with write(2) and as a result page tables get out of sync with block mappings in the filesystem and thus data seen through mmap is different from data seen through read(2). The series passes testing with t_mmap_stale test program from Ross and also other mmap related tests on DAX filesystem. This patch (of 4): dax_invalidate_mapping_entry() currently removes DAX exceptional entries only if they are clean and unlocked. This is done via: invalidate_mapping_pages() invalidate_exceptional_entry() dax_invalidate_mapping_entry() However, for page cache pages removed in invalidate_mapping_pages() there is an additional criteria which is that the page must not be mapped. This is noted in the comments above invalidate_mapping_pages() and is checked in invalidate_inode_page(). For DAX entries this means that we can can end up in a situation where a DAX exceptional entry, either a huge zero page or a regular DAX entry, could end up mapped but without an associated radix tree entry. This is inconsistent with the rest of the DAX code and with what happens in the page cache case. We aren't able to unmap the DAX exceptional entry because according to its comments invalidate_mapping_pages() isn't allowed to block, and unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem. Since we essentially never have unmapped DAX entries to evict from the radix tree, just remove dax_invalidate_mapping_entry(). Fixes: c6dcf52c ("mm: Invalidate DAX radix tree entries only if appropriate") Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.czSigned-off-by: -
Andrew Morton authored
Cc: Tigran Aivazian <aivazian.tigran@gmail.com> Signed-off-by:
-
Michal Hocko authored
Commit 1f5307b1 ("mm, vmalloc: properly track vmalloc users") has pulled asm/pgtable.h include dependency to linux/vmalloc.h and that turned out to be a bad idea for some architectures. E.g. m68k fails with In file included from arch/m68k/include/asm/pgtable_mm.h:145:0, from arch/m68k/include/asm/pgtable.h:4, from include/linux/vmalloc.h:9, from arch/m68k/kernel/module.c:9: arch/m68k/include/asm/mcf_pgtable.h: In function 'nocache_page': >> arch/m68k/include/asm/mcf_pgtable.h:339:43: error: 'init_mm' undeclared (first use in this function) #define pgd_offset_k(address) pgd_offset(&init_mm, address) as spotted by kernel build bot. nios2 fails for other reason In file included from include/asm-generic/io.h:767:0, from arch/nios2/include/asm/io.h:61, from include/linux/io.h:25, from arch/nios2/include/asm/pgtable.h:18, from include/linux/mm.h:70, from include/linux/pid_namespace.h:6, from include/linux/ptrace.h:9, from arch/nios2/include/uapi/asm/elf.h:23, from arch/nios2/include/asm/elf.h:22, from include/linux/elf.h:4, from include/linux/module.h:15, from init/main.c:16: include/linux/vmalloc.h: In function '__vmalloc_node_flags': include/linux/vmalloc.h:99:40: error: 'PAGE_KERNEL' undeclared (first use in this function); did you mean 'GFP_KERNEL'? which is due to the newly added #include <asm/pgtable.h>, which on nios2 includes <linux/io.h> and thus <asm/io.h> and <asm-generic/io.h> which again includes <linux/vmalloc.h>. Tweaking that around just turns out a bigger headache than necessary. This patch reverts 1f5307b1 and reimplements the original fix in a different way. __vmalloc_node_flags can stay static inline which will cover vmalloc* functions. We only have one external user (kvmalloc_node) and we can export __vmalloc_node_flags_caller and provide the caller directly. This is much simpler and it doesn't really need any games with header files. [akpm@linux-foundation.org: coding-style fixes] [mhocko@kernel.org: revert old comment] Link: http://lkml.kernel.org/r/20170509211054.GB16325@dhcp22.suse.cz Fixes: 1f5307b1 ("mm, vmalloc: properly track vmalloc users") Link: http://lkml.kernel.org/r/20170509153702.GR6481@dhcp22.suse.czSigned-off-by:
-
SeongJae Park authored
One return case of `__collapse_huge_page_swapin()` does not invoke tracepoint while every other return case does. This commit adds a tracepoint invocation for the case. Link: http://lkml.kernel.org/r/20170507101813.30187-1-sj38.park@gmail.comSigned-off-by:
SeongJae Park <sj38.park@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Martin Liska authored
Starting from GCC 7.1, __gcov_exit is a new symbol expected to be implemented in a profiling runtime. [akpm@linux-foundation.org: coding-style fixes] [mliska@suse.cz: v2] Link: http://lkml.kernel.org/r/e63a3c59-0149-c97e-4084-20ca8f146b26@suse.cz Link: http://lkml.kernel.org/r/8c4084fa-3885-29fe-5fc4-0d4ca199c785@suse.czSigned-off-by:
Martin Liska <mliska@suse.cz> Acked-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
-
Reza Arbab authored
After commit e2ecc8a7 ("mm, vmstat: print non-populated zones in zoneinfo"), /proc/zoneinfo will show unpopulated zones. A memoryless node, having no populated zones at all, was previously ignored, but will now trigger the WARN() in is_zone_first_populated(). Remove this warning, as its only purpose was to warn of a situation that has since been enabled. Aside: The "per-node stats" are still printed under the first populated zone, but that's not necessarily the first stanza any more. I'm not sure which criteria is more important with regard to not breaking parsers, but it looks a little weird to the eye. Fixes: e2ecc8a7 ("mm, vmstat: print node-based stats in zoneinfo file") Link: http://lkml.kernel.org/r/1493854905-10918-1-git-send-email-arbab@linux.vnet.ibm.comSigned-off-by:
Reza Arbab <arbab@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Deepa Dinamani authored
All uses of the current_fs_time() function have been replaced by other time interfaces. And, its use cases can be fulfilled by current_time() or ktime_get_* variants. Link: http://lkml.kernel.org/r/1491613030-11599-13-git-send-email-deepa.kernel@gmail.comSigned-off-by:
Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Michal Hocko authored
Laurent Dufour has noticed that hwpoinsoned pages are kept charged. In his particular case he has hit a bad_page("page still charged to cgroup") when onlining a hwpoison page. While this looks like something that shouldn't happen in the first place because onlining hwpages and returning them to the page allocator makes only little sense it shows a real problem. hwpoison pages do not get freed usually so we do not uncharge them (at least not since commit 0a31bc97 ("mm: memcontrol: rewrite uncharge API")). Each charge pins memcg (since e8ea14cc ("mm: memcontrol: take a css reference for each charged page")) as well and so the mem_cgroup and the associated state will never go away. Fix this leak by forcibly uncharging a LRU hwpoisoned page in delete_from_lru_cache(). We also have to tweak uncharge_list because it cannot rely on zero ref count for these pages. [akpm@linux-foundation.org: coding-style fixes] Fixes: 0a31bc97 ("mm: memcontrol: rewrite uncharge API") Link: http://lkml.kernel.org/r/20170502185507.GB19165@dhcp22.suse.czSigned-off-by:Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by:
Balbir Singh <bsingharora@gmail.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "Incremental fixes and a small feature addition on top of the main libnvdimm 4.12 pull request: - Geert noticed that tinyconfig was bloated by BLOCK selecting DAX. The size regression is fixed by moving all dax helpers into the dax-core and only specifying "select DAX" for FS_DAX and dax-capable drivers. He also asked for clarification of the NR_DEV_DAX config option which, on closer look, does not need to be a config option at all. Mike also throws in a DEV_DAX_PMEM fixup for good measure. - Ben's attention to detail on -stable patch submissions caught a case where the recent fixes to arch_copy_from_iter_pmem() missed a condition where we strand dirty data in the cache. This is tagged for -stable and will also be included in the rework of the pmem api to a proposed {memcpy,copy_user}_flushcache() interface for 4.13. - Vishal adds a feature that missed the initial pull due to pending review feedback. It allows the kernel to clear media errors when initializing a BTT (atomic sector update driver) instance on a pmem namespace. - Ross noticed that the dax_device + dax_operations conversion broke __dax_zero_page_range(). The nvdimm unit tests fail to check this path, but xfstests immediately trips over it. No excuse for missing this before submitting the 4.12 pull request. These all pass the nvdimm unit tests and an xfstests spot check. The set has received a build success notification from the kbuild robot" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: filesystem-dax: fix broken __dax_zero_page_range() conversion libnvdimm, btt: ensure that initializing metadata clears poison libnvdimm: add an atomic vs process context flag to rw_bytes x86, pmem: Fix cache flushing for iovec write < 8 bytes device-dax: kill NR_DEV_DAX block, dax: move "select DAX" from BLOCK to FS_DAX device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAX -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This contains a one-liner change that has a significant impact: disabling the build of OSS. It's been unmaintained for long time, and we'd like to drop the stuff. Finally, as the first step, stop the build. Let's see whether it works without much complaints. Other than that, there are two small fixes for HD-audio" * tag 'sound-fix-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: sound: Disable the build of OSS drivers ALSA: hda: Fix cpu lockup when stopping the cmd dmas ALSA: hda - Add mute led support for HP EliteBook 840 G3
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull more power-supply updates from Sebastian Reichel: "The power-supply subsystem has a few more changes for the v4.12 merge window: - New battery driver for AXP20X and AXP22X PMICs - Improve max17042_battery for usage on x86 - Misc small cleanups & fixes" * tag 'for-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (34 commits) power: supply: cpcap-charger: Keep trickle charger bits disabled power: supply: cpcap-charger: Fix enable for 3.8V charge setting power: supply: cpcap-charger: Fix charge voltage configuration power: supply: cpcap-charger: Fix charger name power: supply: twl4030-charger: make twl4030_bci_property_is_writeable static power: supply: sbs-battery: Add alert callback mailmap: add Sebastian Reichel power: supply: avoid unused twl4030-madc.h power: supply: sbs-battery: Correct supply status with current draw power: supply: sbs-battery: Don't ignore the first external power change power: supply: pda_power: move from timer to delayed_work power: supply: max17042_battery: Add support for the SCOPE property power: supply: max17042_battery: Add support for the CHARGE_NOW property power: supply: max17042_battery: Add support for the CHARGE_FULL_DESIGN property power: supply: max17042_battery: mAh readings depend on r_sns value power: supply: max17042_battery: Add support for the VOLT_MIN property power: supply: max17042_battery: Add support for the TECHNOLOGY attribute power: supply: max17042_battery: Add external_power_changed callback power: supply: max17042_battery: Add support for the STATUS property power: supply: max17042_battery: Add default platform_data fallback data ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management updates from Zhang Rui: - Fix a problem where orderly_shutdown() is called for multiple times due to multiple critical overheating events raised in a short period by platform thermal driver. (Keerthy) - Introduce a backup thermal shutdown mechanism, which invokes kernel_power_off()/emergency_restart() directly, after orderly_shutdown() being issued for certain amount of time(specified via Kconfig). This is useful in certain conditions that userspace may be unable to power off the system in a clean manner and leaves the system in a critical state, like in the middle of driver probing phase. (Keerthy) - Introduce a new interface in thermal devfreq_cooling code so that the driver can provide more precise data regarding actual power to the thermal governor every time the power budget is calculated. (Lukasz Luba) - Introduce BCM 2835 soc thermal driver and northstar thermal driver, within a new sub-folder. (Rafał Miłecki) - Introduce DA9062/61 thermal driver. (Steve Twiss) - Remove non-DT booting on TI-SoC driver. Also add support to fetching coefficients from DT. (Keerthy) - Refactorf RCAR Gen3 thermal driver. (Niklas Söderlund) - Small fix on MTK and intel-soc-dts thermal driver. (Dawei Chien, Brian Bian) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) thermal: core: Add a back up thermal shutdown mechanism thermal: core: Allow orderly_poweroff to be called only once Thermal: Intel SoC DTS: Change interrupt request behavior trace: thermal: add another parameter 'power' to the tracing function thermal: devfreq_cooling: add new interface for direct power read thermal: devfreq_cooling: refactor code and add get_voltage function thermal: mt8173: minor mtk_thermal.c cleanups thermal: bcm2835: move to the broadcom subdirectory thermal: broadcom: ns: specify myself as MODULE_AUTHOR thermal: da9062/61: Thermal junction temperature monitoring driver Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding thermal: broadcom: add Northstar thermal driver dt-bindings: thermal: add support for Broadcom's Northstar thermal thermal: bcm2835: add thermal driver for bcm2835 SoC dt-bindings: Add thermal zone to bcm2835-thermal example thermal: rcar_gen3_thermal: add suspend and resume support thermal: rcar_gen3_thermal: store device match data in private structure thermal: rcar_gen3_thermal: enable hardware interrupts for trip points thermal: rcar_gen3_thermal: record and check number of TSCs found thermal: rcar_gen3_thermal: check that TSC exists before memory allocation ...
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "AMD, nouveau, one i915, and one EDID fix for v4.12-rc1 Some fixes that it would be good to have in rc1. It contains the i915 quiet fix that you reported. It also has an amdgpu fixes pull, with lots of ongoing work on Vega10 which is new in this kernel and is preliminary support so may have a fair bit of movement. Otherwise a few non-Vega10 AMD fixes, one EDID fix and some nouveau regression fixers" * tag 'drm-fixes-for-v4.12-rc1' of git://people.freedesktop.org/~airlied/linux: (144 commits) drm/i915: Make vblank evade warnings optional drm/nouveau/therm: remove ineffective workarounds for alarm bugs drm/nouveau/tmr: avoid processing completed alarms when adding a new one drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm drm/nouveau/tmr: handle races with hw when updating the next alarm time drm/nouveau/tmr: ack interrupt before processing alarms drm/nouveau/core: fix static checker warning drm/nouveau/fb/ram/gf100-: remove 0x10f200 read drm/nouveau/kms/nv50: skip core channel cursor update on position-only changes drm/nouveau/kms/nv50: fix source-rect-only plane updates drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire() drm/amd/powerplay: refine pwm1_enable callback functions for CI. drm/amd/powerplay: refine pwm1_enable callback functions for vi. drm/amd/powerplay: refine pwm1_enable callback functions for Vega10. drm/amdgpu: refine amdgpu pwm1_enable sysfs interface. drm/amdgpu: add amd fan ctrl mode enums. drm/amd/powerplay: add more smu message on Vega10. drm/amdgpu: fix dependency issue drm/amd: fix init order of sched job drm/amdgpu: add some additional vega10 pci ids ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "Things were a lot more calm than previously expected. It's primarily fixes in various areas, with most of the new functionality centering around TCMU backend driver work that Xiubo Li has been driving. Here's the summary on the feature side: - Make T10-PI verify configurable for emulated (FILEIO + RD) backends (Dmitry Monakhov) - Allow target-core/TCMU pass-through to use in-kernel SPC-PR logic (Bryant Ly + MNC) - Add TCMU support for growing ring buffer size (Xiubo Li + MNC) - Add TCMU support for global block data pool (Xiubo Li + MNC) and on the bug-fix side: - Fix COMPARE_AND_WRITE non GOOD status handling for READ phase failures (Gary Guo + nab) - Fix iscsi-target hang with explicitly changing per NodeACL CmdSN number depth with concurrent login driven session reinstatement. (Gary Guo + nab) - Fix ibmvscsis fabric driver ABORT task handling (Bryant Ly) - Fix target-core/FILEIO zero length handling (Bart Van Assche) Also, there was an OOPs introduced with the WRITE_VERIFY changes that I ended up reverting at the last minute, because as not unusual Bart and I could not agree on the fix in time for -rc1. Since it's specific to a conformance test, it's been reverted for now. There is a separate patch in the queue to address the underlying control CDB write overflow regression in >= v4.3 separate from the WRITE_VERIFY revert here, that will be pushed post -rc1" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (30 commits) Revert "target: Fix VERIFY and WRITE VERIFY command parsing" IB/srpt: Avoid that aborting a command triggers a kernel warning IB/srpt: Fix abort handling target/fileio: Fix zero-length READ and WRITE handling ibmvscsis: Do not send aborted task response tcmu: fix module removal due to stuck thread target: Don't force session reset if queue_depth does not change iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement target: Fix compare_and_write_callback handling for non GOOD status tcmu: Recalculate the tcmu_cmd size to save cmd area memories tcmu: Add global data block pool support tcmu: Add dynamic growing data area feature support target: fixup error message in target_tg_pt_gp_tg_pt_gp_id_store() target: fixup error message in target_tg_pt_gp_alua_access_type_store() target/user: PGR Support target: Add WRITE_VERIFY_16 Documentation/target: add an example script to configure an iSCSI target target: Use kmalloc_array() in transport_kmap_data_sg() target: Use kmalloc_array() in compare_and_write_callback() target: Improve size determinations in two functions ... -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc vfs updates from Al Viro: "Making sure that something like a referral point won't end up as pwd or root. The main part is the last commit (fixing mntns_install()); that one fixes a hard-to-hit race. The fchdir() commit is making fchdir(2) a bit more robust - it should be impossible to get opened files (even O_PATH ones) for referral points in the first place, so the existing checks are OK, but checking the same thing as in chdir(2) is just as cheap. The path_init() commit removes a redundant check that shouldn't have been there in the first place" * 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: make sure that mntns_install() doesn't end up with referral for root path_init(): don't bother with checking MAY_EXEC for LOOKUP_ROOT make sure that fchdir() won't accept referral points, etc.
-
