- 16 Jul, 2020 33 commits
-
-
Lorenzo Bianconi authored
As for DEVMAP, support SEC("xdp_cpumap/") as a short cut for loading the program with type BPF_PROG_TYPE_XDP and expected attach type BPF_XDP_CPUMAP. Signed-off-by:Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/33174c41993a6d860d9c7c1f280a2477ee39ed11.1594734381.git.lorenzo@kernel.org
-
Lorenzo Bianconi authored
Introduce XDP_REDIRECT support for eBPF programs attached to cpumap entries. This patch has been tested on Marvell ESPRESSObin using a modified version of xdp_redirect_cpu sample in order to attach a XDP program to CPUMAP entries to perform a redirect on the mvneta interface. In particular the following scenario has been tested: rq (cpu0) --> mvneta - XDP_REDIRECT (cpu0) --> CPUMAP - XDP_REDIRECT (cpu1) --> mvneta $./xdp_redirect_cpu -p xdp_cpu_map0 -d eth0 -c 1 -e xdp_redirect \ -f xdp_redirect_kern.o -m tx_port -r eth0 tx: 285.2 Kpps rx: 285.2 Kpps Attaching a simple XDP program on eth0 to perform XDP_TX gives comparable results: tx: 288.4 Kpps rx: 288.4 Kpps Co-developed-by:
-
Lorenzo Bianconi authored
Introduce the capability to attach an eBPF program to cpumap entries. The idea behind this feature is to add the possibility to define on which CPU run the eBPF program if the underlying hw does not support RSS. Current supported verdicts are XDP_DROP and XDP_PASS. This patch has been tested on Marvell ESPRESSObin using xdp_redirect_cpu sample available in the kernel tree to identify possible performance regressions. Results show there are no observable differences in packet-per-second: $./xdp_redirect_cpu --progname xdp_cpu_map0 --dev eth0 --cpu 1 rx: 354.8 Kpps rx: 356.0 Kpps rx: 356.8 Kpps rx: 356.3 Kpps rx: 356.6 Kpps rx: 356.6 Kpps rx: 356.7 Kpps rx: 355.8 Kpps rx: 356.8 Kpps rx: 356.8 Kpps Co-developed-by:
-
Lorenzo Bianconi authored
As it has been already done for devmap, introduce 'struct bpf_cpumap_val' to formalize the expected values that can be passed in for a CPUMAP. Update cpumap code to use the struct. Signed-off-by:
-
Lorenzo Bianconi authored
Do not update xdp_redirect_cpu maps running while option loop but defer it after all available options have been parsed. This is a preliminary patch to pass the program name we want to attach to the map entries as a user option Signed-off-by:
-
David Ahern authored
Move the guts of xdp_convert_buff_to_frame to a new helper, xdp_update_frame_from_buff so it can be reused removing code duplication Suggested-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Jesper Dangaard Brouer authored
Commit 77361825 ("bpf: cpumap use ptr_ring_consume_batched") changed away from using single frame ptr_ring dequeue (__ptr_ring_consume) to consume a batched, but it uses a locked version, which as the comment explain isn't needed. Change to use the non-locked version __ptr_ring_consume_batched. Fixes: 77361825 ("bpf: cpumap use ptr_ring_consume_batched") Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "by" in a comment. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Randy Dunlap authored
Drop doubled words in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "the" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "to" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words "or" and "the" in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "not" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words in two comments. Fix a spello/typo. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "the" in two comments. Signed-off-by:
-
Kieran Bingham authored
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptor -> descriptor Signed-off-by:Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: Offload tc police action This patch set adds support for tc police action in mlxsw. Patches #1-#2 add defines for policer bandwidth limits and resource identifiers (e.g., maximum number of policers). Patch #3 adds a common policer core in mlxsw. Currently it is only used by the policy engine, but future patch sets will use it for trap policers and storm control policers. The common core allows us to share common logic between all policer types and abstract certain details from the various users in mlxsw. Patch #4 exposes the maximum number of supported policers and their current usage to user space via devlink-resource. This provides better visibility and also used for selftests purposes. Patches #5-#7 gradually add support for tc police action in the policy engine by calling into previously mentioned policer core. Patch #8 adds a generic selftest for tc-police that can be used with veth pairs or physical loopbacks. Patches #9-#11 add mlxsw-specific selftests. ==================== Signed-off-by: -
Ido Schimmel authored
Test that policers shared by different tc filters are correctly reference counted by observing policers' occupancy via devlink-resource. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Query the maximum number of supported policers using devlink-resource and test that this number can be reached by configuring tc filters with police action. Test that an error is returned in case the maximum number is exceeded. Signed-off-by:
-
Ido Schimmel authored
Test that upper and lower limits on rate and burst size imposed by the device are rejected by the kernel. Signed-off-by:
-
Ido Schimmel authored
Test tc-police action in various scenarios such as Rx policing, Tx policing, shared policer and police piped to mirred. The test passes with both veth pairs and loopbacked ports. # ./tc_police.sh TEST: police on rx [ OK ] TEST: police on tx [ OK ] TEST: police with shared policer - rx [ OK ] TEST: police with shared policer - tx [ OK ] TEST: police rx and mirror [ OK ] TEST: police tx and mirror [ OK ] Signed-off-by:
-
Ido Schimmel authored
Offload action police when used with a flower classifier. The number of dropped packets is read from the policer and reported to tc. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
-
Ido Schimmel authored
Add core functionality required to support police action in the policy engine. The utilized hardware policers are stored in a hash table keyed by the flow action index. This allows to support policer sharing between multiple ACL rules. Signed-off-by:
-
Ido Schimmel authored
In the policy engine, each ACL rule points to an action block where the ACL actions are stored. Each action block consists of one or more action sets. Each action set holds one or more individual actions, up to a maximum queried from the device. For example: Action set #1 Action set #2 +----------+ +--------------+ +--------------+ | ACL rule +----------> Action #1 | +-----> Action #4 | +----------+ +--------------+ | +--------------+ | Action #2 | | | Action #5 | +--------------+ | +--------------+ | Action #3 +------+ | | +--------------+ +--------------+ <---------+ Action block +-----------------> The hardware has a limitation that prevents a policing action (MLXSW_AFA_POLCNT_CODE when used with a policer, not a counter) from being configured in the same action set with a trap action (i.e., MLXSW_AFA_TRAP_CODE or MLXSW_AFA_TRAPWU_CODE). Note that the latter used to implement multiple actions: 'trap', 'mirred', 'drop'. Work around this limitation by teaching mlxsw_afa_block_append_action() to create a new action set not only when there is no more room left in the current set, but also when there is a conflict between previously mentioned actions. Signed-off-by: -
Ido Schimmel authored
Expose via devlink-resource the maximum number of single-rate policers and their current occupancy. Example: $ devlink resource show pci/0000:01:00.0 ... name global_policers size 1000 unit entry dpipe_tables none resources: name single_rate_policers size 968 occ 0 unit entry dpipe_tables none Signed-off-by: -
Ido Schimmel authored
Add common code to handle all policer-related functionality in mlxsw. Currently, only policer for policy engines are supported, but it in the future more policer families will be added such as CPU (trap) policers and storm control policers. The API allows different modules to add / delete policers and read their drop counter. Signed-off-by:
-
Ido Schimmel authored
Add a resource identifier for maximum global policers so that it could be later used to query the information from firmware. Signed-off-by:
-
Ido Schimmel authored
Add policer bandwidth limits for both rate and burst size so that they could be enforced by a later patch. Signed-off-by:
-
Luo bin authored
add support to update firmware by the devlink flashing API Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Suraj Upadhyay authored
Remove the unnecessary label from dn_dev_ioctl() and make its error handling simpler to read. Signed-off-by:
Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
The concept of timestamping DSA switches / Ethernet PHYs is becoming more and more popular, however the Linux kernel timestamping code has evolved quite organically and there's layers upon layers of new and old code that need to work together for things to behave as expected. Add this chapter to explain what the overall goals are. Loosely based upon this email discussion plus some more info: https://lkml.org/lkml/2020/7/6/481Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
- 15 Jul, 2020 7 commits
-
-
YueHaibing authored
commit d565b0a1 ("net: Add Generic Receive Offload infrastructure") left behind this, remove it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YueHaibing authored
commit 263e1201 ("mptcp: consolidate synack processing.") left behind this, remove it. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
YueHaibing authored
It is not used since commit 09c75704 ("xfrm: remove flow cache") Signed-off-by:
-
YueHaibing authored
They are not used any more since commit b1edeb10 ("netlabel: Replace protocol/NetLabel linking with refrerence counts") Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== udp_tunnel: NIC RX port offload infrastructure This set of patches converts further drivers to use the new infrastructure to UDP tunnel port offload merged in commit 0ea46047 ("Merge branch 'udp_tunnel-add-NIC-RX-port-offload-infrastructure'"). v3: - fix a W=1 build warning in qede. v2: - fix a W=1 build warning in xgbe, - expand the size of tables for lio. ==================== Signed-off-by:
-
Jakub Kicinski authored
Straightforward conversion to new infra, 1 VxLAN port, handler may sleep. Signed-off-by:
-
Jakub Kicinski authored
Covert to new infra. Looks like this driver was not doing ref counting, and sleeping in the callback. Signed-off-by:
-
