- 17 Feb, 2016 9 commits
-
-
OGAWA Hirofumi authored
commit 928a4771 upstream. For the root directory, . and .. are faked (using dir_emit_dots()) and ctx->pos is reset from 2 to 0. A corrupted root directory could cause fat_get_entry() to fail, but ->iterate() (fat_readdir()) reports progress to the VFS (with ctx->pos rewound to 0), so any following calls to ->iterate() continue to return the same entries again and again. The result is that userspace will never see the end of the directory, causing e.g. 'ls' to hang in a getdents() loop. [hirofumi@mail.parknet.co.jp: cleanup and make sure to correct fake_offset] Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Richard Weinberger <richard.weinberger@gmail.com> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 92792e48 upstream. Recent gcc versions warn about reading from a negative offset of an on-stack array: drivers/remoteproc/remoteproc_debugfs.c: In function 'rproc_recovery_write': drivers/remoteproc/remoteproc_debugfs.c:167:9: warning: 'buf[4294967295u]' may be used uninitialized in this function [-Wmaybe-uninitialized] I don't see anything in sys_write() that prevents us from being called with a zero 'count' argument, so we should add an extra check in rproc_recovery_write() to prevent the access and avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 2e37abb8 ("remoteproc: create a 'recovery' debugfs entry") Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oleg Nesterov authored
commit 54708d28 upstream. The commit 96d0df79 ("proc: make proc_fd_permission() thread-friendly") fixed the access to /proc/self/fd from sub-threads, but introduced another problem: a sub-thread can't access /proc/<tid>/fd/ or /proc/thread-self/fd if generic_permission() fails. Change proc_fd_permission() to check same_thread_group(pid_task(), current). Fixes: 96d0df79 ("proc: make proc_fd_permission() thread-friendly") Reported-by: "Jin, Yihua" <yihua.jin@intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ioan-Adrian Ratiu authored
commit e470127e upstream. The critical section protected by usbhid->lock in hid_ctrl() is too big and because of this it causes a recursive deadlock. "Too big" means the case statement and the call to hid_input_report() do not need to be protected by the spinlock (no URB operations are done inside them). The deadlock happens because in certain rare cases drivers try to grab the lock while handling the ctrl irq which grabs the lock before them as described above. For example newer wacom tablets like 056a:033c try to reschedule proximity reads from wacom_intuos_schedule_prox_event() calling hid_hw_request() -> usbhid_request() -> usbhid_submit_report() which tries to grab the usbhid lock already held by hid_ctrl(). There are two ways to get out of this deadlock: 1. Make the drivers work "around" the ctrl critical region, in the wacom case for ex. by delaying the scheduling of the proximity read request itself to a workqueue. 2. Shrink the critical region so the usbhid lock protects only the instructions which modify usbhid state, calling hid_input_report() with the spinlock unlocked, allowing the device driver to grab the lock first, finish and then grab the lock afterwards in hid_ctrl(). This patch implements the 2nd solution. Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Seth Jennings authored
commit 26bbe7ef upstream. Commit bdee237c ("x86: mm: Use 2GB memory block size on large-memory x86-64 systems") and 982792c7 ("x86, mm: probe memory block size for generic x86 64bit") introduced large block sizes for x86. This made it possible to have multiple sections per memory block where previously, there was a only every one section per block. Since blocks consist of contiguous ranges of section, there can be holes in the blocks where sections are not present. If one attempts to offline such a block, a crash occurs since the code is not designed to deal with this. This patch is a quick fix to gaurd against the crash by not allowing blocks with non-present sections to be offlined. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=107781Signed-off-by: Seth Jennings <sjennings@variantweb.net> Reported-by: Andrew Banman <abanman@sgi.com> Cc: Daniel J Blueman <daniel@numascale.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Russ Anderson <rja@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Snitzer authored
commit 30ce6e1c upstream. The block allocated at the start of btree_split_sibling() is never released if later insert_at() fails. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Herbert Xu authored
commit 4afa5f96 upstream. The hash_accept call fails to work on sockets that have not received any data. For some algorithm implementations it may cause crashes. This patch fixes this by ensuring that we only export and import on sockets that have received data. Reported-by: Harsh Jain <harshjain.prof@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
libin authored
commit c84da8b9 upstream. In nop_mcount, shdr->sh_offset and welp->r_offset should handle endianness properly, otherwise it will trigger Segmentation fault if the recordmcount main and file.o have different endianness. Link: http://lkml.kernel.org/r/563806C7.7070606@huawei.comSigned-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
In the backport of 1eaf35e4, the call to usb_disabled() was too late, after we had already done some allocation. Move that call to the top of the function instead, making the logic match what is intended and is in the original patch. Reported-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 29 Jan, 2016 31 commits
-
-
Greg Kroah-Hartman authored
-
Yang Shi authored
commit 92e788b7 upstream. As previously reported, some userspace applications depend on bogomips showed by /proc/cpuinfo. Although there is much less legacy impact on aarch64 than arm, it does break libvirt. This patch reverts commit 326b16db ("arm64: delay: don't bother reporting bogomips in /proc/cpuinfo"), but with some tweak due to context change and without the pr_info(). Fixes: 326b16db ("arm64: delay: don't bother reporting bogomips in /proc/cpuinfo") Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> # 3.12+ Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
commit c86576ea upstream. mn10300 builds fail with fs/stat.c: In function 'cp_old_stat': fs/stat.c:163:2: error: 'old_uid_t' undeclared ipc/util.c: In function 'ipc64_perm_to_ipc_perm': ipc/util.c:540:2: error: 'old_uid_t' undeclared Select CONFIG_HAVE_UID16 and remove local definition of CONFIG_UID16 to fix the problem. Fixes: fbc416ff ("arm64: fix building without CONFIG_UID16") Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Morton authored
commit 04ea1e91 upstream. openrisc-allnoconfig: kernel/uid16.c: In function 'SYSC_setgroups16': kernel/uid16.c:184:2: error: implicit declaration of function 'groups_alloc' kernel/uid16.c:184:13: warning: assignment makes pointer from integer without a cast openrisc shouldn't be setting CONFIG_UID16 when CONFIG_MULTIUSER=n. Fixes: 2813893f ("kernel: conditionally support non-root users, groups and capabilities") Reported-by: Fengguang Wu <fengguang.wu@gmail.com> Cc: Iulia Manda <iulia.manda21@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Purdie authored
commit 79b568b9 upstream. hid_connect adds various strings to the buffer but they're all conditional. You can find circumstances where nothing would be written to it but the kernel will still print the supposedly empty buffer with printk. This leads to corruption on the console/in the logs. Ensure buf is initialized to an empty string. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> [dvhart: Initialize string to "" rather than assign buf[0] = NULL;] Cc: Jiri Kosina <jikos@kernel.org> Cc: linux-input@vger.kernel.org Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit e46e31a3 upstream. When using the Promise TX2+ SATA controller on PA-RISC, the system often crashes with kernel panic, for example just writing data with the dd utility will make it crash. Kernel panic - not syncing: drivers/parisc/sba_iommu.c: I/O MMU @ 000000000000a000 is out of mapping resources CPU: 0 PID: 18442 Comm: mkspadfs Not tainted 4.4.0-rc2 #2 Backtrace: [<000000004021497c>] show_stack+0x14/0x20 [<0000000040410bf0>] dump_stack+0x88/0x100 [<000000004023978c>] panic+0x124/0x360 [<0000000040452c18>] sba_alloc_range+0x698/0x6a0 [<0000000040453150>] sba_map_sg+0x260/0x5b8 [<000000000c18dbb4>] ata_qc_issue+0x264/0x4a8 [libata] [<000000000c19535c>] ata_scsi_translate+0xe4/0x220 [libata] [<000000000c19a93c>] ata_scsi_queuecmd+0xbc/0x320 [libata] [<0000000040499bbc>] scsi_dispatch_cmd+0xfc/0x130 [<000000004049da34>] scsi_request_fn+0x6e4/0x970 [<00000000403e95a8>] __blk_run_queue+0x40/0x60 [<00000000403e9d8c>] blk_run_queue+0x3c/0x68 [<000000004049a534>] scsi_run_queue+0x2a4/0x360 [<000000004049be68>] scsi_end_request+0x1a8/0x238 [<000000004049de84>] scsi_io_completion+0xfc/0x688 [<0000000040493c74>] scsi_finish_command+0x17c/0x1d0 The cause of the crash is not exhaustion of the IOMMU space, there is plenty of free pages. The function sba_alloc_range is called with size 0x11000, thus the pages_needed variable is 0x11. The function sba_search_bitmap is called with bits_wanted 0x11 and boundary size is 0x10 (because dma_get_seg_boundary(dev) returns 0xffff). The function sba_search_bitmap attempts to allocate 17 pages that must not cross 16-page boundary - it can't satisfy this requirement (iommu_is_span_boundary always returns true) and fails even if there are many free entries in the IOMMU space. How did it happen that we try to allocate 17 pages that don't cross 16-page boundary? The cause is in the function iommu_coalesce_chunks. This function tries to coalesce adjacent entries in the scatterlist. The function does several checks if it may coalesce one entry with the next, one of those checks is this: if (startsg->length + dma_len > max_seg_size) break; When it finishes coalescing adjacent entries, it allocates the mapping: sg_dma_len(contig_sg) = dma_len; dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE); sg_dma_address(contig_sg) = PIDE_FLAG | (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT) | dma_offset; It is possible that (startsg->length + dma_len > max_seg_size) is false (we are just near the 0x10000 max_seg_size boundary), so the funcion decides to coalesce this entry with the next entry. When the coalescing succeeds, the function performs dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE); And now, because of non-zero dma_offset, dma_len is greater than 0x10000. iommu_alloc_range (a pointer to sba_alloc_range) is called and it attempts to allocate 17 pages for a device that must not cross 16-page boundary. To fix the bug, we must make sure that dma_len after addition of dma_offset and alignment doesn't cross the segment boundary. I.e. change if (startsg->length + dma_len > max_seg_size) break; to if (ALIGN(dma_len + dma_offset + startsg->length, IOVP_SIZE) > max_seg_size) break; This patch makes this change (it precalculates max_seg_boundary at the beginning of the function iommu_coalesce_chunks). I also added a check that the mapping length doesn't exceed dma_get_seg_boundary(dev) (it is not needed for Promise TX2+ SATA, but it may be needed for other devices that have dma_get_seg_boundary lower than dma_get_max_seg_size). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Will Deacon authored
commit 32d63978 upstream. In paging_init, we allocate the zero page, memset it to zero and then point TTBR0 to it in order to avoid speculative fetches through the identity mapping. In order to guarantee that the freshly zeroed page is indeed visible to the page table walker, we need to execute a dsb instruction prior to writing the TTBR. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Blackwood authored
commit 5db4fd8c upstream. Make sure to clear out any ptrace singlestep state when a ptrace(2) PTRACE_DETACH call is made on arm64 systems. Otherwise, the previously ptraced task will die off with a SIGTRAP signal if the debugger just previously singlestepped the ptraced task. Signed-off-by: John Blackwood <john.blackwood@ccur.com> [will: added comment to justify why this is in the arch code] Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit fbc416ff upstream. As reported by Michal Simek, building an ARM64 kernel with CONFIG_UID16 disabled currently fails because the system call table still needs to reference the individual function entry points that are provided by kernel/sys_ni.c in this case, and the declarations are hidden inside of #ifdef CONFIG_UID16: arch/arm64/include/asm/unistd32.h:57:8: error: 'sys_lchown16' undeclared here (not in a function) __SYSCALL(__NR_lchown, sys_lchown16) I believe this problem only exists on ARM64, because older architectures tend to not need declarations when their system call table is built in assembly code, while newer architectures tend to not need UID16 support. ARM64 only uses these system calls for compatibility with 32-bit ARM binaries. This changes the CONFIG_UID16 check into CONFIG_HAVE_UID16, which is set unconditionally on ARM64 with CONFIG_COMPAT, so we see the declarations whenever we need them, but otherwise the behavior is unchanged. Fixes: af1839eb ("Kconfig: clean up the long arch list for the UID16 config option") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Zyngier authored
commit c0f09634 upstream. When running a 32bit guest under a 64bit hypervisor, the ARMv8 architecture defines a mapping of the 32bit registers in the 64bit space. This includes banked registers that are being demultiplexed over the 64bit ones. On exceptions caused by an operation involving a 32bit register, the HW exposes the register number in the ESR_EL2 register. It was so far understood that SW had to distinguish between AArch32 and AArch64 accesses (based on the current AArch32 mode and register number). It turns out that I misinterpreted the ARM ARM, and the clue is in D1.20.1: "For some exceptions, the exception syndrome given in the ESR_ELx identifies one or more register numbers from the issued instruction that generated the exception. Where the exception is taken from an Exception level using AArch32 these register numbers give the AArch64 view of the register." Which means that the HW is already giving us the translated version, and that we shouldn't try to interpret it at all (for example, doing an MMIO operation from the IRQ mode using the LR register leads to very unexpected behaviours). The fix is thus not to perform a call to vcpu_reg32() at all from vcpu_reg(), and use whatever register number is supplied directly. The only case we need to find out about the mapping is when we actively generate a register access, which only occurs when injecting a fault in a guest. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ulrich Weigand authored
commit 2e50c4be upstream. If a text section starts out with a data blob before the first function start label, disassembly parsing doing in recordmcount.pl gets confused on powerpc, leading to creation of corrupted module objects. This was not a problem so far since the compiler would never create such text sections. However, this has changed with a recent change in GCC 6 to support distances of > 2GB between a function and its assoicated TOC in the ELFv2 ABI, exposing this problem. There is already code in recordmcount.pl to handle such data blobs on the sparc64 platform. This patch uses the same method to handle those on powerpc as well. Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boqun Feng authored
commit 81d7a329 upstream. According to memory-barriers.txt, xchg*, cmpxchg* and their atomic_ versions all need to be fully ordered, however they are now just RELEASE+ACQUIRE, which are not fully ordered. So also replace PPC_RELEASE_BARRIER and PPC_ACQUIRE_BARRIER with PPC_ATOMIC_ENTRY_BARRIER and PPC_ATOMIC_EXIT_BARRIER in __{cmp,}xchg_{u32,u64} respectively to guarantee fully ordered semantics of atomic{,64}_{cmp,}xchg() and {cmp,}xchg(), as a complement of commit b97021f8 ("powerpc: Fix atomic_xxx_return barrier semantics") This patch depends on patch "powerpc: Make value-returning atomics fully ordered" for PPC_ATOMIC_ENTRY_BARRIER definition. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boqun Feng authored
commit 49e9cf3f upstream. According to memory-barriers.txt: > Any atomic operation that modifies some state in memory and returns > information about the state (old or new) implies an SMP-conditional > general memory barrier (smp_mb()) on each side of the actual > operation ... Which mean these operations should be fully ordered. However on PPC, PPC_ATOMIC_ENTRY_BARRIER is the barrier before the actual operation, which is currently "lwsync" if SMP=y. The leading "lwsync" can not guarantee fully ordered atomics, according to Paul Mckenney: https://lkml.org/lkml/2015/10/14/970 To fix this, we define PPC_ATOMIC_ENTRY_BARRIER as "sync" to guarantee the fully-ordered semantics. This also makes futex atomics fully ordered, which can avoid possible memory ordering problems if userspace code relies on futex system call for fully ordered semantics. Fixes: b97021f8 ("powerpc: Fix atomic_xxx_return barrier semantics") Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Neuling authored
commit 7f821fc9 upstream. Currently we can hit a scenario where we'll tm_reclaim() twice. This results in a TM bad thing exception because the second reclaim occurs when not in suspend mode. The scenario in which this can happen is the following. We attempt to deliver a signal to userspace. To do this we need obtain the stack pointer to write the signal context. To get this stack pointer we must tm_reclaim() in case we need to use the checkpointed stack pointer (see get_tm_stackpointer()). Normally we'd then return directly to userspace to deliver the signal without going through __switch_to(). Unfortunatley, if at this point we get an error (such as a bad userspace stack pointer), we need to exit the process. The exit will result in a __switch_to(). __switch_to() will attempt to save the process state which results in another tm_reclaim(). This tm_reclaim() now causes a TM Bad Thing exception as this state has already been saved and the processor is no longer in TM suspend mode. Whee! This patch checks the state of the MSR to ensure we are TM suspended before we attempt the tm_reclaim(). If we've already saved the state away, we should no longer be in TM suspend mode. This has the additional advantage of checking for a potential TM Bad Thing exception. Found using syscall fuzzer. Fixes: fb09692e ("powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes") Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Neuling authored
commit d2b9d2a5 upstream. Currently we allow both the MSR T and S bits to be set by userspace on a signal return. Unfortunately this is a reserved configuration and will cause a TM Bad Thing exception if attempted (via rfid). This patch checks for this case in both the 32 and 64 bit signals code. If both T and S are set, we mark the context as invalid. Found using a syscall fuzzer. Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ido Schimmel authored
[ Upstream commit 60a6531b ] We can't be within an RCU read-side critical section when deleting VLANs, as underlying drivers might sleep during the hardware operation. Therefore, replace the RCU critical section with a mutex. This is consistent with team_vlan_rx_add_vid. Fixes: 3d249d4c ("net: introduce ethernet teaming device") Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Hutchings authored
[ Upstream commit 4ab42d78 ] Currently slhc_init() treats out-of-range values of rslots and tslots as equivalent to 0, except that if tslots is too large it will dereference a null pointer (CVE-2015-7799). Add a range-check at the top of the function and make it return an ERR_PTR() on error instead of NULL. Change the callers accordingly. Compile-tested only. Reported-by: 郭永刚 <guoyonggang@360.cn> References: http://article.gmane.org/gmane.comp.security.oss.general/17908Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Hutchings authored
[ Upstream commit 0baa57d8 ] Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 34ae6a1a ] When a tunnel decapsulates the outer header, it has to comply with RFC 6080 and eventually propagate CE mark into inner header. It turns out IP6_ECN_set_ce() does not correctly update skb->csum for CHECKSUM_COMPLETE packets, triggering infamous "hw csum failure" messages and stack traces. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 7aaed57c ] Ivaylo Dimitrov reported a regression caused by commit 7866a621 ("dev: add per net_device packet type chains"). skb->dev becomes NULL and we crash in __netif_receive_skb_core(). Before above commit, different kind of bugs or corruptions could happen without major crash. But the root cause is that phonet_rcv() can queue skb without checking if skb is shared or not. Many thanks to Ivaylo Dimitrov for his help, diagnosis and tests. Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Karl Heiss authored
[ Upstream commit 03d84a5f ] Commit 1f718f0f ("bonding: populate neighbour's private on enslave") undoes the fix provided by commit c2edacf8 ("bonding / ipv6: no addrconf for slaves separately from master") by effectively setting the slave flag after the slave has been opened. If the slave comes up quickly enough, it will go through the IPv6 addrconf before the slave flag has been set and will get a link local IPv6 address. In order to ensure that addrconf knows to ignore the slave devices on state change, set IFF_SLAVE before dev_open() during bonding enslavement. Fixes: 1f718f0f ("bonding: populate neighbour's private on enslave") Signed-off-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Neal Cardwell authored
[ Upstream commit 83d15e70 ] For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno and CUBIC, per RFC 5681 (equation 4). tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh value if the intended reduction is as big or bigger than the current cwnd. Congestion control modules should never return a zero or negative ssthresh. A zero ssthresh generally results in a zero cwnd, causing the connection to stall. A negative ssthresh value will be interpreted as a u32 and will set a target cwnd for PRR near 4 billion. Oleksandr Natalenko reported that a system using tcp_yeah with ECN could see a warning about a prior_cwnd of 0 in tcp_cwnd_reduction(). Testing verified that this was due to tcp_yeah_ssthresh() misbehaving in this way. Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sasha Levin authored
[ Upstream commit 320f1a4a ] proc_dostring() needs an initialized destination string, while the one provided in proc_sctp_do_hmac_alg() contains stack garbage. Thus, writing to cookie_hmac_alg would strlen() that garbage and end up accessing invalid memory. Fixes: 3c68198e ("sctp: Make hmac algorithm selection for cookie generation dynamic") Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Francesco Ruggeri authored
[ Upstream commit 07a5d384 ] dst_release should not access dst->flags after decrementing __refcnt to 0. The dst_entry may be in dst_busy_list and dst_gc_task may dst_destroy it before dst_release gets a chance to access dst->flags. Fixes: d69bbf88 ("net: fix a race in dst_release()") Fixes: 27b75c95 ("net: avoid RCU for NOCACHE dst") Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hannes Frederic Sowa authored
[ Upstream commit ff621985 ] [I stole this patch from Eric Biederman. He wrote:] > There is no defined mechanism to pass network namespace information > into /sbin/bridge-stp therefore don't even try to invoke it except > for bridge devices in the initial network namespace. > > It is possible for unprivileged users to cause /sbin/bridge-stp to be > invoked for any network device name which if /sbin/bridge-stp does not > guard against unreasonable arguments or being invoked twice on the > same network device could cause problems. [Hannes: changed patch using netns_eq] Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
willy tarreau authored
[ Upstream commit 712f4aad ] It is possible for a process to allocate and accumulate far more FDs than the process' limit by sending them over a unix socket then closing them to keep the process' fd count low. This change addresses this problem by keeping track of the number of FDs in flight per user and preventing non-privileged processes from having more FDs in flight than their configured FD limit. Reported-by: socketpair@gmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Mitigates: CVE-2013-4312 (Linux 2.0+) Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Westphal authored
[ Upstream commit 55285bf0 ] Dmitry reports memleak with syskaller program. Problem is that connector bumps skb usecount but might not invoke callback. So move skb_get to where we invoke the callback. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit 068d8bd3 ] In sctp_close, sctp_make_abort_user may return NULL because of memory allocation failure. If this happens, it will bypass any state change and never free the assoc. The assoc has no chance to be freed and it will be kept in memory with the state it had even after the socket is closed by sctp_close(). So if sctp_make_abort_user fails to allocate memory, we should abort the asoc via sctp_primitive_ABORT as well. Just like the annotation in sctp_sf_cookie_wait_prm_abort and sctp_sf_do_9_1_prm_abort said, "Even if we can't send the ABORT due to low memory delete the TCB. This is a departure from our typical NOMEM handling". But then the chunk is NULL (low memory) and the SCTP_CMD_REPLY cmd would dereference the chunk pointer, and system crash. So we should add SCTP_CMD_REPLY cmd only when the chunk is not NULL, just like other places where it adds SCTP_CMD_REPLY cmd. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Ryabinin authored
[ Upstream commit e459dfee ] ip6addrlbl_get() has never worked. If ip6addrlbl_hold() succeeded, ip6addrlbl_get() will exit with '-ESRCH'. If ip6addrlbl_hold() failed, ip6addrlbl_get() will use about to be free ip6addrlbl_entry pointer. Fix this by inverting ip6addrlbl_hold() check. Fixes: 2a8cc6c8 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Cong Wang <cwang@twopensource.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vijay Pandurangan authored
[ Upstream commit ce8c839b ] Packets that arrive from real hardware devices have ip_summed == CHECKSUM_UNNECESSARY if the hardware verified the checksums, or CHECKSUM_NONE if the packet is bad or it was unable to verify it. The current version of veth will replace CHECKSUM_NONE with CHECKSUM_UNNECESSARY, which causes corrupt packets routed from hardware to a veth device to be delivered to the application. This caused applications at Twitter to receive corrupt data when network hardware was corrupting packets. We believe this was added as an optimization to skip computing and verifying checksums for communication between containers. However, locally generated packets have ip_summed == CHECKSUM_PARTIAL, so the code as written does nothing for them. As far as we can tell, after removing this code, these packets are transmitted from one stack to another unmodified (tcpdump shows invalid checksums on both sides, as expected), and they are delivered correctly to applications. We didn’t test every possible network configuration, but we tried a few common ones such as bridging containers, using NAT between the host and a container, and routing from hardware devices to containers. We have effectively deployed this in production at Twitter (by disabling RX checksum offloading on veth devices). This code dates back to the first version of the driver, commit <e314dbdc> ("[NET]: Virtual ethernet device driver"), so I suspect this bug occurred mostly because the driver API has evolved significantly since then. Commit <0b796750> ("net/veth: Fix packet checksumming") (in December 2010) fixed this for packets that get created locally and sent to hardware devices, by not changing CHECKSUM_PARTIAL. However, the same issue still occurs for packets coming in from hardware devices. Co-authored-by: Evan Jones <ej@evanjones.ca> Signed-off-by: Evan Jones <ej@evanjones.ca> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vijay Pandurangan <vijayp@vijayp.ca> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit 1eaf35e4 upstream. The module should fail to load. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-