- 11 Aug, 2017 19 commits
-
-
Annie Cherkaev authored
commit 9f5af546 upstream. This fixes a potential buffer overflow in isdn_net.c caused by an unbounded strcpy. [ ISDN seems to be effectively unmaintained, and the I4L driver in particular is long deprecated, but in case somebody uses this.. - Linus ] Signed-off-by:
Jiten Thakkar <jitenmt@gmail.com> Signed-off-by:
Annie Cherkaev <annie.cherk@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Metcalf authored
commit 990486c8 upstream. It's possible that the destination can be shadowed in userspace (as, for example, the perf buffers are now). So we should take care not to leak data that could be inspected by userspace. Signed-off-by:
Chris Metcalf <cmetcalf@ezchip.com> Signed-off-by:
-
Chris Metcalf authored
commit 30035e45 upstream. The strscpy() API is intended to be used instead of strlcpy(), and instead of most uses of strncpy(). - Unlike strlcpy(), it doesn't read from memory beyond (src + size). - Unlike strlcpy() or strncpy(), the API provides an easy way to check for destination buffer overflow: an -E2BIG error return value. - The provided implementation is robust in the face of the source buffer being asynchronously changed during the copy, unlike the current implementation of strlcpy(). - Unlike strncpy(), the destination buffer will be NUL-terminated if the string in the source buffer is too long. - Also unlike strncpy(), the destination buffer will not be updated beyond the NUL termination, avoiding strncpy's behavior of zeroing the entire tail end of the destination buffer. (A memset() after the strscpy() can be used if this behavior is desired.) - The implementation should be reasonably performant on all platforms since it uses the asm/word-at-a-time.h API rather than simple byte copy. Kernel-to-kernel string copy is not considered to be performance critical in any case. Signed-off-by:
-
Jia-Ju Bai authored
commit e8f4ae85 upstream. The driver may sleep under a spin lock, the function call path is: isdn_ppp_mp_receive (acquire the lock) isdn_ppp_mp_reassembly isdn_ppp_push_higher isdn_ppp_decompress isdn_ppp_ccp_reset_trans isdn_ppp_ccp_reset_alloc_state kzalloc(GFP_KERNEL) --> may sleep To fixed it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Florian Fainelli authored
commit 0878fff1 upstream. The Generic PHY driver is a catch-all PHY driver and it should preserve whatever prior initialization has been done by boot loader or firmware agents. For specific PHY device configuration it is expected that a specialized PHY driver would take over that role. Resetting the generic PHY was a bad idea that has lead to several complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore the behavior prior to 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()"). Reported-by:
Felix Fietkau <nbd@nbd.name> Fixes: 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Al Viro authored
commit 96c26653 upstream. ... rather than relying on ciptool(8) never passing it anything else. Give it e.g. an AF_UNIX connected socket (from socketpair(2)) and it'll oops, trying to evaluate &l2cap_pi(sock->sk)->chan->dst... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hedberg authored
commit 88d9077c upstream. The bnep_get_device function may be triggered by an ioctl just after a connection has gone down. In such a case the respective L2CAP chan->conn pointer will get set to NULL (by l2cap_chan_del). This patch adds a missing NULL check for this case in the bnep_get_device() function. Reported-by:
Patrik Flykt <patrik.flykt@linux.intel.com> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Al Viro authored
commit 71bb99a0 upstream. same story as cmtp Signed-off-by:
-
Cheah Kok Cheong authored
commit bf279ece upstream. Move comedi_proc_init to the end to avoid orphaned proc entry if module loading failed. Signed-off-by:
Cheah Kok Cheong <thrust73@gmail.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 138bb148 which is commit ba4a648f upstream. Michal Hocko writes: JFYI. We have encountered a regression after applying this patch on a large ppc machine. While the patch is the right thing to do it doesn't work well with the current vmalloc area size on ppc and large machines where NUMA nodes are very far from each other. Just for the reference the boot fails on such a machine with bunch of warning preceeding it. See http://lkml.kernel.org/r/20170724134240.GL25221@dhcp22.suse.cz It seems the right thing to do is to enlarge the vmalloc space on ppc but this is not the case in the upstream kernel yet AFAIK. It is also questionable whether that is a stable material but I will decision on you here. We have reverted this patch from our 4.4 based kernel. Newer kernels do not have enlarged vmalloc space yet AFAIK so they won't work properly eiter. This bug is quite rare though because you need a specific HW configuration to trigger the issue - namely NUMA nodes have to be far away from each other in the physical memory space. Cc: Michal Hocko <mhocko@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Paul Mackerras authored
commit 7ceaa6dc upstream. At present, HV KVM on POWER8 and POWER9 machines loses any instruction or data breakpoint set in the host whenever a guest is run. Instruction breakpoints are currently only used by xmon, but ptrace and the perf_event subsystem can set data breakpoints as well as xmon. To fix this, we save the host values of the debug registers (CIABR, DAWR and DAWRX) before entering the guest and restore them on exit. To provide space to save them in the stack frame, we expand the stack frame allocated by kvmppc_hv_entry() from 112 to 144 bytes. [paulus@ozlabs.org - Adjusted stack offsets since we aren't saving POWER9-specific registers.] Fixes: b005255e ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Paul Mackerras authored
Commit 46a704f8 ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly", 2017-06-15) added code which assumes that the kernel is able to handle a TM (transactional memory) unavailable interrupt from userspace by reloading the TM-related registers and enabling TM for the process. That ability was added in the 4.9 kernel; earlier kernel versions simply panic on getting the TM unavailable interrupt. Since commit 46a704f8 has been backported to the 3.18 stable tree as commit 0b423dab, 3.18.59 and subsequent versions are vulnerable to a userspace-triggerable panic. This patch fixes the problem by explicitly reloading the TM-related registers before returning to userspace, rather than disabling TM for the process. Commit 46a704f8 also failed to enable TM for the kernel, leading to a TM unavailable interrupt in the kernel, causing an oops. This fixes that problem too, by enabling TM before accessing the TM registers. That problem is fixed upstream by the patch "KVM: PPC: Book3S HV: Enable TM before accessing TM registers". Fixes: 0b423dab ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly") Signed-off-by:
-
Paul Mackerras authored
commit 4c3bb4cc upstream. This restores several special-purpose registers (SPRs) to sane values on guest exit that were missed before. TAR and VRSAVE are readable and writable by userspace, and we need to save and restore them to prevent the guest from potentially affecting userspace execution (not that TAR or VRSAVE are used by any known program that run uses the KVM_RUN ioctl). We save/restore these in kvmppc_vcpu_run_hv() rather than on every guest entry/exit. FSCR affects userspace execution in that it can prohibit access to certain facilities by userspace. We restore it to the normal value for the task on exit from the KVM_RUN ioctl. IAMR is normally 0, and is restored to 0 on guest exit. However, with a radix host on POWER9, it is set to a value that prevents the kernel from executing user-accessible memory. On POWER9, we save IAMR on guest entry and restore it on guest exit to the saved value rather than 0. On POWER8 we continue to set it to 0 on guest exit. PSPB is normally 0. We restore it to 0 on guest exit to prevent userspace taking advantage of the guest having set it non-zero (which would allow userspace to set its SMT priority to high). UAMOR is normally 0. We restore it to 0 on guest exit to prevent the AMR from being used as a covert channel between userspace processes, since the AMR is not context-switched at present. [paulus@ozlabs.org - removed IAMR bits that are only needed on POWER9; adjusted FSCR save/restore for lack of fscr field in thread_struct.] Fixes: b005255e ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Cc: stable@vger.kernel.org # v3.14+ Signed-off-by:
-
Sinclair Yeh authored
commit fcfffdd8 upstream. The current code does not look correct, and the reason for it is probably lost. Since this now generates a compiler warning, fix it to what makes sense. Reported-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
-
Ofer Heifetz authored
commit 7e96d559 upstream. Since thread_group worker and raid5d kthread are not in sync, if worker writes stripe before raid5d then requests will be waiting for issue_pendig. Issue observed when building raid5 with ext4, in some build runs jbd2 would get hung and requests were waiting in the HW engine waiting to be issued. Fix this by adding a call to async_tx_issue_pending_all in the raid5_do_work. Signed-off-by:
Ofer Heifetz <oferh@marvell.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Laurent Vivier authored
commit 4fd1bd44 upstream. As for commit 68baf692 ("powerpc/pseries: Fix of_node_put() underflow during DLPAR remove"), the call to of_node_put() must be removed from pSeries_reconfig_remove_node(). dlpar_detach_node() and pSeries_reconfig_remove_node() both call of_detach_node(), and thus the node should not be released in both cases. Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes") Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Eric Dumazet authored
commit b2504a5d upstream. Dmitry reported warnings occurring in __skb_gso_segment() [1] All SKB_GSO_DODGY producers can allow user space to feed packets that trigger the current check. We could prevent them from doing so, rejecting packets, but this might add regressions to existing programs. It turns out our SKB_GSO_DODGY handlers properly set up checksum information that is needed anyway when packets needs to be segmented. By checking again skb_needs_check() after skb_mac_gso_segment(), we should remove these pesky warnings, at a very minor cost. With help from Willem de Bruijn [1] WARNING: CPU: 1 PID: 6768 at net/core/dev.c:2439 skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 lo: caps=(0x000000a2803b7c69, 0x0000000000000000) len=138 data_len=0 gso_size=15883 gso_type=4 ip_summed=0 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 6768 Comm: syz-executor1 Not tainted 4.9.0 #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ffff8801c063ecd8 ffffffff82346bdf ffffffff00000001 1ffff100380c7d2e ffffed00380c7d26 0000000041b58ab3 ffffffff84b37e38 ffffffff823468f1 ffffffff84820740 ffffffff84f289c0 dffffc0000000000 ffff8801c063ee20 Call Trace: [<ffffffff82346bdf>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff82346bdf>] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 [<ffffffff81827e34>] panic+0x1fb/0x412 kernel/panic.c:179 [<ffffffff8141f704>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff8141f7e5>] warn_slowpath_fmt+0xc5/0x100 kernel/panic.c:565 [<ffffffff8356cbaf>] skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 [<ffffffff83585cd2>] __skb_gso_segment+0x482/0x780 net/core/dev.c:2706 [<ffffffff83586f19>] skb_gso_segment include/linux/netdevice.h:3985 [inline] [<ffffffff83586f19>] validate_xmit_skb+0x5c9/0xc20 net/core/dev.c:2969 [<ffffffff835892bb>] __dev_queue_xmit+0xe6b/0x1e70 net/core/dev.c:3383 [<ffffffff8358a2d7>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3424 [<ffffffff83ad161d>] packet_snd net/packet/af_packet.c:2930 [inline] [<ffffffff83ad161d>] packet_sendmsg+0x32ed/0x4d30 net/packet/af_packet.c:2955 [<ffffffff834f0aaa>] sock_sendmsg_nosec net/socket.c:621 [inline] [<ffffffff834f0aaa>] sock_sendmsg+0xca/0x110 net/socket.c:631 [<ffffffff834f329a>] ___sys_sendmsg+0x8fa/0x9f0 net/socket.c:1954 [<ffffffff834f5e58>] __sys_sendmsg+0x138/0x300 net/socket.c:1988 [<ffffffff834f604d>] SYSC_sendmsg net/socket.c:1999 [inline] [<ffffffff834f604d>] SyS_sendmsg+0x2d/0x50 net/socket.c:1995 [<ffffffff84371941>] entry_SYSCALL_64_fastpath+0x1f/0xc2 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Joel Fernandes authored
commit 10970449 upstream. Currently pstore has a global spinlock for all zones. Since the zones are independent and modify different areas of memory, there's no need to have a global lock, so we should use a per-zone lock as introduced here. Also, when ramoops's ftrace use-case has a FTRACE_PER_CPU flag introduced later, which splits the ftrace memory area into a single zone per CPU, it will eliminate the need for locking. In preparation for this, make the locking optional. Signed-off-by:
Joel Fernandes <joelaf@google.com> [kees: updated commit message] Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Leo Yan <leo.yan@linaro.org> Signed-off-by:
-
Yuejie Shi authored
commit 89e357d8 upstream. A dump may come in the middle of another dump, modifying its dump structure members. This race condition will result in NULL pointer dereference in kernel. So add a lock to prevent that race. Fixes: 83321d6b ("[AF_KEY]: Dump SA/SP entries non-atomically") Signed-off-by:
Yuejie Shi <syjcnss@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Signed-off-by:
-
- 27 Jul, 2017 21 commits
-
-
Greg Kroah-Hartman authored
-
Maciej W. Rozycki authored
commit 7b82c105 upstream. Fix commit e50c0a8f ("Support the MIPS32 / MIPS64 DSP ASE.") and send SIGILL rather than SIGBUS whenever an unimplemented BPOSGE32 DSP ASE instruction has been encountered in `__compute_return_epc_for_insn' as our Reserved Instruction exception handler would in response to an attempt to actually execute the instruction. Sending SIGBUS only makes sense for the unaligned PC case, since moved to `__compute_return_epc'. Adjust function documentation accordingly, correct formatting and use `pr_info' rather than `printk' as the other exit path already does. Fixes: e50c0a8f ("Support the MIPS32 / MIPS64 DSP ASE.") Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 2.6.14+ Patchwork: https://patchwork.linux-mips.org/patch/16396/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Greg Hackmann authored
Commit ff86bf0c ("alarmtimer: Rate limit periodic intervals") sets a minimum bound on the alarm timer interval. This minimum bound shouldn't be applied if the interval is 0. Otherwise, one-shot timers will be converted into periodic ones. Fixes: ff86bf0c ("alarmtimer: Rate limit periodic intervals") Reported-by:
Ben Fennema <fennema@google.com> Signed-off-by:
Greg Hackmann <ghackmann@google.com> Cc: stable@vger.kernel.org Cc: John Stultz <john.stultz@linaro.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Chunyu Hu authored
commit db9108e0 upstream. Hit the kmemleak when executing instance_rmdir, it forgot releasing mem of tracing_cpumask. With this fix, the warn does not appear any more. unreferenced object 0xffff93a8dfaa7c18 (size 8): comm "mkdir", pid 1436, jiffies 4294763622 (age 9134.308s) hex dump (first 8 bytes): ff ff ff ff ff ff ff ff ........ backtrace: [<ffffffff88b6567a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8861ea41>] __kmalloc_node+0xf1/0x280 [<ffffffff88b505d3>] alloc_cpumask_var_node+0x23/0x30 [<ffffffff88b5060e>] alloc_cpumask_var+0xe/0x10 [<ffffffff88571ab0>] instance_mkdir+0x90/0x240 [<ffffffff886e5100>] tracefs_syscall_mkdir+0x40/0x70 [<ffffffff886565c9>] vfs_mkdir+0x109/0x1b0 [<ffffffff8865b1d0>] SyS_mkdir+0xd0/0x100 [<ffffffff88403857>] do_syscall_64+0x67/0x150 [<ffffffff88b710e7>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/1500546969-12594-1-git-send-email-chuhu@redhat.com Fixes: ccfe9e42 ("tracing: Make tracing_cpumask available for all instances") Signed-off-by:
Chunyu Hu <chuhu@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Bjorn Andersson authored
commit d50daa2a upstream. Include the OF-based modalias in the uevent sent when registering SPMI devices, so that user space has a chance to autoload the kernel module for the device. Tested-by:
Rob Clark <robdclark@gmail.com> Reported-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Stephen Boyd authored
commit 7a3b7cd3 upstream. The ULPI bus can be built as a module, and it will soon be calling these functions when it supports probing devices from DT. Export them so they can be used by the ULPI module. Acked-by:
Rob Herring <robh@kernel.org> Cc: <devicetree@vger.kernel.org> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Paul Mackerras authored
commit ca8efa1d upstream. This adds code to save the values of three SPRs (special-purpose registers) used by userspace to control event-based branches (EBBs), which are essentially interrupts that get delivered directly to userspace. These registers are loaded up with guest values when entering the guest, and their values are saved when exiting the guest, but we were not saving the host values and restoring them before going back to userspace. On POWER8 this would only affect userspace programs which explicitly request the use of EBBs and also use the KVM_RUN ioctl, since the only source of EBBs on POWER8 is the PMU, and there is an explicit enable bit in the PMU registers (and those PMU registers do get properly context-switched between host and guest). On POWER9 there is provision for externally-generated EBBs, and these are not subject to the control in the PMU registers. Since these registers only affect userspace, we can save them when we first come in from userspace and restore them before returning to userspace, rather than saving/restoring the host values on every guest entry/exit. Similarly, we don't need to worry about their values on offline secondary threads since they execute in the context of the idle task, which never executes in userspace. Fixes: b005255e ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Signed-off-by:
-
Imre Deak authored
commit 636c4c3e upstream. Currently we may process up/down message transactions containing uninitialized data. This can happen if there was an error during the reception of any message in the transaction, but we happened to receive the last message correctly with the end-of-message flag set. To avoid this abort the reception of the transaction when the first error is detected, rejecting any messages until a message with the start-of-message flag is received (which will start a new transaction). This is also what the DP 1.4 spec 2.11.8.2 calls for in this case. In addtion this also prevents receiving bogus transactions without the first message with the the start-of-message flag set. v2: - unchanged v3: - git add the part that actually skips messages after an error in drm_dp_sideband_msg_build() Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lyude <lyude@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719134632.13366-1-imre.deak@intel.comSigned-off-by:
-
Imre Deak authored
commit 7f8b3987 upstream. In case of an unknown broadcast message is sent mstb will remain unset, so check for this. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Imre Deak authored
commit 448421b5 upstream. Handle any error due to partial reads, timeouts etc. to avoid parsing uninitialized data subsequently. Also bail out if the parsing itself fails. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Michael Gugino authored
commit 5a1d4c5d upstream. Add support for USB Device TP-Link TL-WN722N v2. VendorID: 0x2357, ProductID: 0x010c Signed-off-by:
Michael Gugino <michael.gugino.2@gmail.com> Signed-off-by:
-
Ingo Molnar authored
commit 6a8a75f3 upstream. This reverts commit cc1582c2. This commit introduced a regression that broke rr-project, which uses sampling events to receive a signal on overflow (but does not care about the contents of the sample). These signals are critical to the correct operation of rr. There's been some back and forth about how to fix it - but to not keep applications in limbo queue up a revert. Reported-by:
Kyle Huey <me@kylehuey.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20170628105600.GC5981@leverpostejSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jin Yao authored
commit 80f62589 upstream. When the jump instruction is displayed at the row 0 in annotate view, the arrow is broken. An example: 16.86 │ ┌──je 82 0.01 │ movsd (%rsp),%xmm0 │ movsd 0x8(%rsp),%xmm4 │ movsd 0x8(%rsp),%xmm1 │ movsd (%rsp),%xmm3 │ divsd %xmm4,%xmm0 │ divsd %xmm3,%xmm1 │ movsd (%rsp),%xmm2 │ addsd %xmm1,%xmm0 │ addsd %xmm2,%xmm0 │ movsd %xmm0,(%rsp) │82: sub $0x1,%ebx 83.03 │ ↑ jne 38 │ add $0x10,%rsp │ xor %eax,%eax │ pop %rbx │ ← retq The patch increments the row number before checking with 0. Signed-off-by:
Yao Jin <yao.jin@linux.intel.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 944e1abe ("perf ui browser: Add method to draw up/down arrow line") Link: http://lkml.kernel.org/r/1496901704-30275-1-git-send-email-yao.jin@linux.intel.comSigned-off-by:
-
Jiang Yi authored
commit 1d6ef276 upstream. This patch addresses a COMPARE_AND_WRITE se_device->caw_sem leak, that would be triggered during normal se_cmd shutdown or abort via __transport_wait_for_tasks(). This would occur because target_complete_cmd() would catch this early and do complete_all(&cmd->t_transport_stop_comp), but since target_complete_ok_work() or target_complete_failure_work() are never called to invoke se_cmd->transport_complete_callback(), the COMPARE_AND_WRITE specific callbacks never release caw_sem. To address this special case, go ahead and release caw_sem directly from target_complete_cmd(). (Remove '&& success' from check, to release caw_sem regardless of scsi_status - nab) Signed-off-by:
Jiang Yi <jiangyilism@gmail.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Jan Kara authored
commit f2e95355 upstream. udf_setsize() called truncate_setsize() with i_data_sem held. Thus truncate_pagecache() called from truncate_setsize() could lock a page under i_data_sem which can deadlock as page lock ranks below i_data_sem - e. g. writeback can hold page lock and try to acquire i_data_sem to map a block. Fix the problem by moving truncate_setsize() calls from under i_data_sem. It is safe for us to change i_size without holding i_data_sem as all the places that depend on i_size being stable already hold inode_lock. Fixes: 7e49b6f2Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
NeilBrown authored
commit cc89684c upstream. Since commit bafc9b75 ("vfs: More precise tests in d_invalidate") in v3.18, a return of '0' from ->d_revalidate() will cause the dentry to be invalidated even if it has filesystems mounted on or it or on a descendant. The mounted filesystem is unmounted. This means we need to be careful not to return 0 unless the directory referred to truly is invalid. So -ESTALE or -ENOENT should invalidate the directory. Other errors such a -EPERM or -ERESTARTSYS should be returned from ->d_revalidate() so they are propagated to the caller. A particular problem can be demonstrated by: 1/ mount an NFS filesystem using NFSv3 on /mnt 2/ mount any other filesystem on /mnt/foo 3/ ls /mnt/foo 4/ turn off network, or otherwise make the server unable to respond 5/ ls /mnt/foo & 6/ cat /proc/$!/stack # note that nfs_lookup_revalidate is in the call stack 7/ kill -9 $! # this results in -ERESTARTSYS being returned 8/ observe that /mnt/foo has been unmounted. This patch changes nfs_lookup_revalidate() to only treat -ESTALE from nfs_lookup_verify_inode() and -ESTALE or -ENOENT from ->lookup() as indicating an invalid inode. Other errors are returned. Also nfs_check_inode_attributes() is changed to return -ESTALE rather than -EIO. This is consistent with the error returned in similar circumstances from nfs_update_inode(). As this bug allows any user to unmount a filesystem mounted on an NFS filesystem, this fix is suitable for stable kernels. Fixes: bafc9b75 ("vfs: More precise tests in d_invalidate") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Chen Hong authored
commit 340d394a upstream. The driver checks port->exists twice in i8042_interrupt(), first when trying to assign temporary "serio" variable, and second time when deciding whether it should call serio_interrupt(). The value of port->exists may change between the 2 checks, and we may end up calling serio_interrupt() with a NULL pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: [<ffffffff8150feaf>] _spin_lock_irqsave+0x1f/0x40 PGD 0 Oops: 0002 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.32-358.el6.x86_64 #1 QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:[<ffffffff8150feaf>] [<ffffffff8150feaf>] _spin_lock_irqsave+0x1f/0x40 RSP: 0018:ffff880028203cc0 EFLAGS: 00010082 RAX: 0000000000010000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000282 RSI: 0000000000000098 RDI: 0000000000000050 RBP: ffff880028203cc0 R08: ffff88013e79c000 R09: ffff880028203ee0 R10: 0000000000000298 R11: 0000000000000282 R12: 0000000000000050 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000098 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000050 CR3: 0000000001a85000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88013e79c000, task ffff88013e79b500) Stack: ffff880028203d00 ffffffff813de186 ffffffffffffff02 0000000000000000 <d> 0000000000000000 0000000000000000 0000000000000000 0000000000000098 <d> ffff880028203d70 ffffffff813e0162 ffff880028203d20 ffffffff8103b8ac Call Trace: <IRQ> [<ffffffff813de186>] serio_interrupt+0x36/0xa0 [<ffffffff813e0162>] i8042_interrupt+0x132/0x3a0 [<ffffffff8103b8ac>] ? kvm_clock_read+0x1c/0x20 [<ffffffff8103b8b9>] ? kvm_clock_get_cycles+0x9/0x10 [<ffffffff810e1640>] handle_IRQ_event+0x60/0x170 [<ffffffff8103b154>] ? kvm_guest_apic_eoi_write+0x44/0x50 [<ffffffff810e3d8e>] handle_edge_irq+0xde/0x180 [<ffffffff8100de89>] handle_irq+0x49/0xa0 [<ffffffff81516c8c>] do_IRQ+0x6c/0xf0 [<ffffffff8100b9d3>] ret_from_intr+0x0/0x11 [<ffffffff81076f63>] ? __do_softirq+0x73/0x1e0 [<ffffffff8109b75b>] ? hrtimer_interrupt+0x14b/0x260 [<ffffffff8100c1cc>] ? call_softirq+0x1c/0x30 [<ffffffff8100de05>] ? do_softirq+0x65/0xa0 [<ffffffff81076d95>] ? irq_exit+0x85/0x90 [<ffffffff81516d80>] ? smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8100bb93>] ? apic_timer_interrupt+0x13/0x20 To avoid the issue let's change the second check to test whether serio is NULL or not. Also, let's take i8042_lock in i8042_start() and i8042_stop() instead of trying to be overly smart and using memory barriers. Signed-off-by:
Chen Hong <chenhong3@huawei.com> [dtor: take lock in i8042_start()/i8042_stop()] Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Maciej W. Rozycki authored
commit 13769eba upstream. Terminate FPU emulation immediately whenever an ISA mode switch has been observed. This is so that we do not interpret machine code in the wrong mode, for example when a regular MIPS FPU instruction has been placed in a delay slot of a jump that switches into the MIPS16 mode, as with the following code (taken from a GCC test suite case): 00400650 <set_fast_math>: 400650: 3c020100 lui v0,0x100 400654: 03e00008 jr ra 400658: 44c2f800 ctc1 v0,c1_fcsr 40065c: 00000000 nop [...] 004012d0 <__libc_csu_init>: 4012d0: f000 6a02 li v0,2 4012d4: f150 0b1c la v1,3f9430 <_DYNAMIC-0x6df0> 4012d8: f400 3240 sll v0,16 4012dc: e269 addu v0,v1 4012de: 659a move gp,v0 4012e0: f00c 64f6 save a0-a2,48,ra,s0-s1 4012e4: 673c move s1,gp 4012e6: f010 9978 lw v1,-32744(s1) 4012ea: d204 sw v0,16(sp) 4012ec: eb40 jalr v1 4012ee: 653b move t9,v1 4012f0: f010 997c lw v1,-32740(s1) 4012f4: f030 9920 lw s1,-32736(s1) 4012f8: e32f subu v1,s1 4012fa: 326b sra v0,v1,2 4012fc: d206 sw v0,24(sp) 4012fe: 220c beqz v0,401318 <__libc_csu_init+0x48> 401300: 6800 li s0,0 401302: 99e0 lw a3,0(s1) 401304: 4801 addiu s0,1 401306: 960e lw a2,56(sp) 401308: 4904 addiu s1,4 40130a: 950d lw a1,52(sp) 40130c: 940c lw a0,48(sp) 40130e: ef40 jalr a3 401310: 653f move t9,a3 401312: 9206 lw v0,24(sp) 401314: ea0a cmp v0,s0 401316: 61f5 btnez 401302 <__libc_csu_init+0x32> 401318: 6476 restore 48,ra,s0-s1 40131a: e8a0 jrc ra Here `set_fast_math' is called from `40130e' (`40130f' with the ISA bit) and emulation triggers for the CTC1 instruction. As it is in a jump delay slot emulation continues from `401312' (`401313' with the ISA bit). However we have no path to handle MIPS16 FPU code emulation, because there are no MIPS16 FPU instructions. So the default emulation path is taken, interpreting a 32-bit word fetched by `get_user' from `401313' as a regular MIPS instruction, which is: 401313: f5ea0a92 sdc1 $f10,2706(t7) This makes the FPU emulator proceed with the supposed SDC1 instruction and consequently makes the program considered here terminate with SIGSEGV. A similar although less severe issue exists with pure-microMIPS processors in the case where similarly an FPU instruction is emulated in a delay slot of a register jump that (incorrectly) switches into the regular MIPS mode. A subsequent instruction fetch from the jump's target is supposed to cause an Address Error exception, however instead we proceed with regular MIPS FPU emulation. For simplicity then, always terminate the emulation loop whenever a mode change is detected, denoted by an ISA mode bit flip. As from commit 377cb1b6 ("MIPS: Disable MIPS16/microMIPS crap for platforms not supporting these ASEs.") the result of `get_isa16_mode' can be hardcoded to 0, so we need to examine the ISA mode bit by hand. This complements commit 102cedc3 ("MIPS: microMIPS: Floating point support.") which added JALX decoding to FPU emulation. Fixes: 102cedc3 ("MIPS: microMIPS: Floating point support.") Signed-off-by:
-
Maciej W. Rozycki authored
commit 11a3799d upstream. Fix a regression introduced with commit fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") and defer to `__compute_return_epc' if the ISA bit is set in EPC with non-MIPS16, non-microMIPS hardware, which will then arrange for a SIGBUS due to an unaligned instruction reference. Returning EPC here is never correct as the API defines this function's result to be either a negative error code on failure or one of 0 and BRANCH_LIKELY_TAKEN on success. Fixes: fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") Signed-off-by:
-
Maciej W. Rozycki authored
commit a9db101b upstream. Complement commit fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") and actually decode the regular MIPS JALX major instruction opcode, the handling of which has been added with the said commit for EPC calculation in `__compute_return_epc_for_insn'. Fixes: fb6883e5 ("MIPS: microMIPS: Support handling of delay slots.") Signed-off-by:
-
James Hogan authored
commit 49955d84 upstream. The MIPS sysmips system call handler may return directly from the MIPS_ATOMIC_SET case (mips_atomic_set()) to syscall_exit. This path restores the static (callee saved) registers, however they won't have been saved on entry to the system call. Use the save_static_function() macro to create a __sys_sysmips wrapper function which saves the static registers before calling sys_sysmips, so that the correct static register state is restored by syscall_exit. Fixes: f1e39a4a ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16149/Signed-off-by:
-
