This driver has been implicitly relying on kmalloc alignment
to be sufficient for DMA.  This may no longer be the case with
upcoming arm64 changes.

This patch changes it to explicitly request DMA alignment from
the Crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds helpers to access the kpp context structure and
request context structure with an added alignment for DMA access.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds helpers to access the akcipher context structure and
request context structure with an added alignment for DMA access.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Previously we limited the maximum alignment mask to 63.  This
is mostly due to stack usage for shash.  This patch introduces
a separate limit for shash algorithms and increases the general
limit to 127 which is the value that we need for DMA allocations
on arm64.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds helpers to access the skcipher context structure and
request context structure with an added alignment for DMA access.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds helpers to access the ahash context structure and
request context structure with an added alignment for DMA access.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds helpers to access the aead context structure and
request context structure with an added alignment for DMA access.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds the helpers crypto_tfm_ctx_aligned and
crypto_tfm_ctx_dma.  The first aligns the tfm context to the
value cra_alignmask.  The second sets the alignment according
to dma_cache_get_alignment();

This patch also moves crypto_tfm_ctx into algapi.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The helper crypto_tfm_ctx is only used by the Crypto API algorithm
code and should really be in algapi.h.  However, for historical
reasons many files relied on it to be in crypto.h.  This patch
changes those files to use algapi.h instead in prepartion for a
move.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

omap_sham_probe() calls pm_runtime_get_sync() and calls
pm_runtime_put_sync() latter to put usage_counter. However,
pm_runtime_get_sync() will increment usage_counter even it failed. Fix
it by replacing it with pm_runtime_resume_and_get() to keep usage
counter balanced.

Fixes: b359f034 ("crypto: omap-sham - Convert to use pm_runtime API")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

curve25519-x86_64.c fails to build when CONFIG_GCOV_KERNEL is enabled.
The error is "inline assembly requires more registers than available"
thrown from the `fsqr()` function. Therefore, excluding this file from
GCOV profiling until this issue is resolved. Thereby allowing
CONFIG_GCOV_PROFILE_ALL to be enabled for x86.
Signed-off-by: Joe Fradley <joefradley@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There is no real point in allocating dedicated memory for the irqs array.
MAXFLOW is only 2, so it is easier to allocated the needed space
directly within the 'meson_dev' structure.

This saves some memory allocation and avoids an indirection when using the
irqs array.

Fixes: 48fe583f ("crypto: amlogic - Add crypto accelerator...")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize cannot be determined in case of fallbacks.
Therefore it must be stored in the tfm and not the alg object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize cannot be determined in case of fallbacks.
Therefore it must be stored in the tfm and not the alg object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize should only be changed through a helper.
To do so we need to first add a helper for this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

release_firmware() checks whether firmware pointer is NULL. Remove the redundant NULL check in release_tar_archive().
Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of reqsize must only be changed through the helper.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If CAAM is not in "trusted" or "secure" state, a fixed non-volatile key
is used instead of the unique device key. This is the default mode of
operation without secure boot (HAB). In this scenario, CAAM encrypted
blobs should be used only for testing but not in a production
environment, so issue a warning.
Signed-off-by: Nikolaus Voss <nikolaus.voss@haag-streit.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix to return a negative error code -EINVAL instead of 0.

Fixes: 0cec19c7 ("crypto: qat - add support for compression for 4xxx")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The U2F zero apparently has a real TRNG in it with maximum quality, not
one with quality of "1", which was likely a misinterpretation of the
field as a boolean. So remove the assignment entirely, so that we get
the default quality setting.

In the u2f-zero firmware, the 0x21 RNG command used by this driver is
handled as such [1]:

  case U2F_CUSTOM_GET_RNG:
    if (atecc_send_recv(ATECC_CMD_RNG,ATECC_RNG_P1,ATECC_RNG_P2,
      NULL, 0,
      appdata.tmp,
      sizeof(appdata.tmp), &res) == 0 )
    {
      memmove(msg->pkt.init.payload, res.buf, 32);
      U2FHID_SET_LEN(msg, 32);
      usb_write((uint8_t*)msg, 64);
    }
    else
    {
      U2FHID_SET_LEN(msg, 0);
      usb_write((uint8_t*)msg, 64);
    }

This same call to `atecc_send_recv(ATECC_CMD_RNG,ATECC_RNG_P1,
ATECC_RNG_P2,...)` is then also used in the token's cryptographically
critical "u2f_new_keypair" function, as its rather straightforward
source of random bytes [2]:

  int8_t u2f_new_keypair(uint8_t * handle, uint8_t * appid, uint8_t * pubkey)
  {
    struct atecc_response res;
    uint8_t private_key[36];
    int i;

    watchdog();

    if (atecc_send_recv(ATECC_CMD_RNG,ATECC_RNG_P1,ATECC_RNG_P2,
      NULL, 0,
      appdata.tmp,
      sizeof(appdata.tmp), &res) != 0 )
    {
      return -1;
    }

So it seems rather plain that the ATECC RNG is considered to provide
good random numbers.

[1] https://github.com/conorpp/u2f-zero/blob/master/firmware/src/custom.c
[2] https://github.com/conorpp/u2f-zero/blob/master/firmware/src/u2f_atecc.c

Cc: Andrej Shadura <andrew.shadura@collabora.co.uk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In function 'hisi_qm_resume', if the device fails to be started,
directly returning error code will cause the device to be unavailable.
However, the failure may be caused by device error, which will be
reported to the driver, and driver can reset and restart device.
Therefore, check device status instead of returning error code
directly. Returns 0 if device error has occurred, otherwise returns
error code.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

'QM_XEQ_DEPTH_CAP' mask value is GENMASK(31, 0) instead of GENMASK(15, 0).
If the mask value is incorrect, will cause abnormal events cannot be
handled. So fix it.

Fixes: 129a9f34 ("crypto: hisilicon/qm - get qp num and depth from hardware registers")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This reverts commit 22ca9f4a because CFI
no longer breaks cross-module function address equality, so
crypto_shash_alg_has_setkey() can now be an inline function like before.

This commit should not be backported to kernels that don't have the new
CFI implementation.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The arm architecture doesn't support CFI yet, and even if it did, the
new CFI implementation supports indirect calls to assembly functions.
Therefore, there's no need to use a wrapper function for nh_neon().
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sm3_neon_transform() is called via indirect function calls.  Therefore
it needs to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause
its type hash to be emitted when the kernel is built with
CONFIG_CFI_CLANG=y.  Otherwise, the code crashes with a CFI failure (if
the compiler didn't happen to optimize out the indirect call).

Fixes: c50d3285 ("arm64: Add types to indirect called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since the CFI implementation now supports indirect calls to assembly
functions, take advantage of that rather than use a wrapper function.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sm4_aesni_avx_ctr_enc_blk8(), sm4_aesni_avx_cbc_dec_blk8(),
sm4_aesni_avx_cfb_dec_blk8(), sm4_aesni_avx2_ctr_enc_blk16(),
sm4_aesni_avx2_cbc_dec_blk16(), and sm4_aesni_avx2_cfb_dec_blk16() are
called via indirect function calls.  Therefore they need to use
SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause their type
hashes to be emitted when the kernel is built with CONFIG_CFI_CLANG=y.
Otherwise, the code crashes with a CFI failure.

(Or at least that should be the case.  For some reason the CFI checks in
sm4_avx_cbc_decrypt(), sm4_avx_cfb_decrypt(), and sm4_avx_ctr_crypt()
are not always being generated, using current tip-of-tree clang.
Anyway, this patch is a good idea anyway.)

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sm3_transform_avx() is called via indirect function calls.  Therefore it
needs to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause its
type hash to be emitted when the kernel is built with
CONFIG_CFI_CLANG=y.  Otherwise, the code crashes with a CFI failure (if
the compiler didn't happen to optimize out the indirect call).

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sha512_transform_ssse3(), sha512_transform_avx(), and
sha512_transform_rorx() are called via indirect function calls.
Therefore they need to use SYM_TYPED_FUNC_START instead of
SYM_FUNC_START to cause their type hashes to be emitted when the kernel
is built with CONFIG_CFI_CLANG=y.  Otherwise, the code crashes with a
CFI failure (if the compiler didn't happen to optimize out the indirect
calls).

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sha256_transform_ssse3(), sha256_transform_avx(),
sha256_transform_rorx(), and sha256_ni_transform() are called via
indirect function calls.  Therefore they need to use
SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause their type
hashes to be emitted when the kernel is built with CONFIG_CFI_CLANG=y.
Otherwise, the code crashes with a CFI failure (if the compiler didn't
happen to optimize out the indirect calls).

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sha1_transform_ssse3(), sha1_transform_avx(), and sha1_ni_transform()
(but not sha1_transform_avx2()) are called via indirect function calls.
Therefore they need to use SYM_TYPED_FUNC_START instead of
SYM_FUNC_START to cause their type hashes to be emitted when the kernel
is built with CONFIG_CFI_CLANG=y.  Otherwise, the code crashes with a
CFI failure (if the compiler didn't happen to optimize out the indirect
calls).

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since the CFI implementation now supports indirect calls to assembly
functions, take advantage of that rather than use wrapper functions.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

aria_aesni_avx_encrypt_16way(), aria_aesni_avx_decrypt_16way(),
aria_aesni_avx_ctr_crypt_16way(), aria_aesni_avx_gfni_encrypt_16way(),
aria_aesni_avx_gfni_decrypt_16way(), and
aria_aesni_avx_gfni_ctr_crypt_16way() are called via indirect function
calls.  Therefore they need to use SYM_TYPED_FUNC_START instead of
SYM_FUNC_START to cause their type hashes to be emitted when the kernel
is built with CONFIG_CFI_CLANG=y.  Otherwise, the code crashes with a
CFI failure.

Fixes: ccace936 ("x86: Add types to indirectly called assembly functions")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>