Add Linux device driver for TI single-channel CMOS
    8/10/12-bit analog-to-digital converter with a
    high-speed serial interface.
Signed-off-by: Milan Stevanovic <milan.o.stevanovic@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Drivers should not 'select' a subsystem. Instead they should depend
on it. If the subsystem is disabled, the user probably did that for
a purpose and one driver shouldn't be changing that.

This also makes all IIO drivers consistent w.r.t depending on SYSFS
instead of selecting it.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The X-Powers AXP813 PMIC is really close to what is already done for
AXP20X/AXP22X.

There are two pairs of bits to set the rate (one for Voltage and Current
measurements and one for TS/GPIO0 voltage measurements) instead of one.

The register to set the ADC rates is different from the one for
AXP20X/AXP22X.

GPIO0 can be used as an ADC (measuring Volts) unlike for AXP22X.

The scales to apply to the different inputs are unlike the ones from
AXP20X and AXP22X.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

To prepare for a future patch that will add a DT node for the ADC, make
axp20x_adc able to probe from DT and get the per-variant data from
of_device_id.data since platform_device_id.driver_data won't be set when
probing by DT.

Leave the ability to probe via platform for driver compatibility with
old DTs.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

X-Powers PMICs have several ADC channels that can be used for different
purposes, e.g. PMIC internal temperature, battery voltage or AC current.

This is the documentation for AXP209, AXP221/223 and AXP813 ADC
bindings.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

To prepare for a new comer that set a different register with different
values, move rate setting in a function that is specific to each AXP
variant.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The burnout currents can be enabled only if buffer is enabled
and CHOP is disabled.

So, if neither of these conditions are met, then
we should disable the burnout currents in the driver as well,
and warn the user.

This change doesn't fix anything.
The burnout currents simply won't work if CHOP is enabled
or buffer is disabled.
The intent is to provide the user with some feedback
instead of silently not working inside the chip.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Remove unneeded error handling on the result of a call
to platform_get_resource() when the value is passed to
devm_ioremap_resource().
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Remove unnecessary unaligned access routine in hts221_read_oneshot() and
the related include
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Introduce regmap API support to access to i2c/spi bus instead of
using a custom support.
Remove lock mutex since concurrency is already managed by regmap API
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Remove following sparse warnings in hts221_parse_temp_caldata() and in
hts221_parse_rh_caldata():
drivers/iio/humidity/hts221_core.c:302:19: warning: cast to
restricted __le16
drivers/iio/humidity/hts221_core.c:314:18: warning: cast to
restricted __le16
drivers/iio/humidity/hts221_core.c:320:18: warning: cast to
restricted __le16
drivers/iio/humidity/hts221_core.c:355:18: warning: cast to
restricted __le16
drivers/iio/humidity/hts221_core.c:361:18: warning: cast to
restricted __le16

Fixes: e4a70e3e ("iio: humidity: add support to hts221 rh/temp combo device")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

gcc-8 reports

drivers/iio/accel/st_accel_i2c.c: In function 'st_accel_i2c_probe':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 20 equals destination size [-Wstringop-truncation]

The compiler require that the length of the dest string is greater than
the length we want to copy to make sure the dest string is
nul-terminated. We can just use strlcpy() to avoid this warning.
Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This patch changes the indentation of the statements after case labels.
The linux coding guidelines do not explicitly mentiond this but pretty
much all existing code doesn't put any statements into the same line of
their belonging case labels. Therefore this adapts to the more usual style.

Please note that there is still a lot of > 80 character lines which will
cause checkpatch warnings. This patch does not intent to fix this
already existing issue.
Signed-off-by: Michael Panzlaff <michael.panzlaff@fau.de>
Signed-off-by: Tillmann Zipperer <tillmann.zipperer@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The trailing semicolon is an empty statement that does nothing.
Removing it since it has no purpose.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the checkpatch message:

    CHECK: Alignment should match open parenthesis
    #1380: FILE: drivers/staging/fbtft/fbtft-core.c:1380:
    +		dev_warn(dev,
    +			"no default functions for regwidth=%d and buswidth=%d\n",
Signed-off-by: Luis Gerhorst <linux-kernel@luisgerhorst.de>
Signed-off-by: Jonny Schaefer <schaefer.jonny@gmail.com>
Acked-by: Alexander Wuerstlein <arw@cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the misspelled constant to 'SWITCH_NO_ERR'.
Issue reported by checkpatch.pl
Signed-off-by: Sumit Pundir <pundirsumit11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Several staging directories have TODO files that indicate a
subsystem will be removed in the future.

Using a status entry of "S:	Obsolete" helps indicate the
subsystem files should not be modified unnecessarily.

checkpatch also tests this setting and emits a warning that
the matching subsystem files should not be modified.

This might help avoid receiving patches that will be dropped.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Casting a value returned by memory an allocation function is
not required and can be removed. Also add in a newline after before
the first statement. Code clean up as suggested by coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch warnings:

  CHECK: Alignment should match open parenthesis
Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dma mask var was defined as dma_addr_t but should be
u64. This showed as a sparse warning when building for 32 bit.
Fix it by changing type to u64 and drop the cast.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The debugfs interface defines stub function if debugfs is not
enabled, which were missing the 'static inline' qualifiers causing
sparse warnings.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the missing include of include file with function declarations.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove include files not needed for compilation.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ccree driver source files were using an inconsistent
naming convention stemming from what the company was called
when they were added.

Move to a single consistent naming convention for better
code readability.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LIBCFS_ALLOC
LIBCFS_ALLOC_ATOMIC
LIBCFS_ALLOC_POST
LIBCFS_CPT_ALLOC
LIBCFS_FREE

are no longer used, and so are removed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LIBCFS_APT_ALLOC() calls kvmalloc_node() with GFP_NOFS
which is not permitted.
Mostly, a kmalloc_node(GFP_NOFS) is appropriate, though occasionally
the allocation is large and GFP_KERNEL is acceptable, so
kvmalloc_node() can be used.

This patch introduces 4 alternatives to LIBCFS_CPT_ALLOC():
 kmalloc_cpt()
 kzalloc_cpt()
 kvmalloc_cpt()
 kvzalloc_cpt().

Each takes a size, gfp flags, and cpt number.

Almost every call to LIBCFS_CPT_ALLOC() passes lnet_cpt_table()
as the table.  This patch embeds that choice in the k*alloc_cpt()
macros, and opencode kzalloc_node(..., cfs_cpt_spread_node(..))
in the one case that lnet_cpt_table() isn't used.

When LIBCFS_CPT_ALLOC() is replaced, the matching LIBCFS_FREE()
is also replaced, with with kfree() or kvfree() as appropriate.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Just call kzalloc(GFP_ATOMIC) directly.
We don't need the warning on failure.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

this allocation is called from several places, but all are
during initialization, so GFP_NOFS is not needed.
So use kvmalloc and GFP_KERNEL.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The size of the data structure is primarily controlled
by the iovec size, which is limited to 256.
Entries in this vector are 12 bytes, so the whole
will always fit in a page.
So it is safe to use kmalloc (kvmalloc not needed).
So replace LIBCFS_ALLOC with kmalloc.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This allocation is reasonably small.
As the function is called "*_locked", it might not be safe
to perform a GFP_KERNEL allocation, so be safe and
use GFP_NOFS.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These are not called from filesystem context, so use
GFP_KERNEL, not LIBCFS_ALLOC().
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

None of these need GFP_NOFS so allocate directly.
Change matching LIBCFS_FREE() to kfree() or kvfree().
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

None of these need to be GFP_NOFS, so use GFP_KERNEL explicitly
with kmalloc(), kvmalloc(), or kvmalloc_array().
Change matching LIBCFS_FREE() to kfree() or kvfree()
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When an allocation happens from process context rather than
filesystem context, it is best to use GFP_KERNEL rather than
LIBCFS_ALLOC() which always uses GFP_NOFS.
This include initialization during, or prior to, mount,
and code run from separate worker threads.

So for some of these cases, switch to kmalloc, kvmalloc, or
kvmalloc_array() as appropriate.
In some cases we preserve __GFP_ZERO (via kzalloc/kvzalloc), but in
others it is clear that allocated memory is immediately initialized.

In each case, the matching LIBCFS_FREE() is converted to
kfree() or kvfree()

This is just a subset of locations that need changing.
As there are quite a lot, I've broken them up into several
ad-hoc sets to avoid review-fatigue.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The buffers allocated in router_proc are to temporarily
hold strings created for procfs files.
So they do not need to be zeroed and are safe to use
GFP_KERNEL.
So use kmalloc() directly except in two cases where it
isn't trivial to confirm that the size is always small.
In those cases, use kvmalloc().
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All of the "name" buffers here are at most LST_NAME_SIZE+1
bytes, so 33 bytes at most.
They are only used temporarily during the life of the function
that allocates them.
So it is much simpler to just allocate on the stack.
Worst case is lst_tet_add_ioct(), which allocates
3 for these which 99 bytes on the stack, instead of the 24 that would
have been allocated for 64-bit pointers.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

So that we can use the common cpumask allocation functions,
switch to cpumask_var_t.
We need to be careful not to free a cpumask_var_t until the
variable has been initialized, and it cannot be initialized
directly.
So we must be sure either that it is filled with zeros, or
that zalloc_cpumask_var() has been called on it.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>