1. 02 Apr, 2014 13 commits
  2. 30 Mar, 2014 4 commits
  3. 29 Mar, 2014 3 commits
    • Linus Torvalds's avatar
      Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 981e893e
      Linus Torvalds authored
      Pull timer fix from Ingo Molnar:
       "A late breaking fix from John.  (The bug fixed has a hard lockup
        potential, but that was not observed, warnings were)"
      
      * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        time: Revert to calling clock_was_set_delayed() while in irq context
      981e893e
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client · 0f2776e6
      Linus Torvalds authored
      Pull Ceph fix from Sage Weil:
       "This drops a bad assert that a few users have been hitting but we've
        only recently been able to track down"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
        rbd: drop an unsafe assertion
      0f2776e6
    • Alex Elder's avatar
      rbd: drop an unsafe assertion · 638c323c
      Alex Elder authored
      Olivier Bonvalet reported having repeated crashes due to a failed
      assertion he was hitting in rbd_img_obj_callback():
      
          Assertion failure in rbd_img_obj_callback() at line 2165:
      	rbd_assert(which >= img_request->next_completion);
      
      With a lot of help from Olivier with reproducing the problem
      we were able to determine the object and image requests had
      already been completed (and often freed) at the point the
      assertion failed.
      
      There was a great deal of discussion on the ceph-devel mailing list
      about this.  The problem only arose when there were two (or more)
      object requests in an image request, and the problem was always
      seen when the second request was being completed.
      
      The problem is due to a race in the window between setting the
      "done" flag on an object request and checking the image request's
      next completion value.  When the first object request completes, it
      checks to see if its successor request is marked "done", and if
      so, that request is also completed.  In the process, the image
      request's next_completion value is updated to reflect that both
      the first and second requests are completed.  By the time the
      second request is able to check the next_completion value, it
      has been set to a value *greater* than its own "which" value,
      which caused an assertion to fail.
      
      Fix this problem by skipping over any completion processing
      unless the completing object request is the next one expected.
      Test only for inequality (not >=), and eliminate the bad
      assertion.
      Tested-by: default avatarOlivier Bonvalet <ob@daevel.fr>
      Signed-off-by: default avatarAlex Elder <elder@linaro.org>
      Reviewed-by: default avatarSage Weil <sage@inktank.com>
      Reviewed-by: default avatarIlya Dryomov <ilya.dryomov@inktank.com>
      638c323c
  4. 28 Mar, 2014 20 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 49d8137a
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) We've discovered a common error in several networking drivers, they
          put VLAN offload features into ->vlan_features, which would suggest
          that they support offloading 2 or more levels of VLAN encapsulation.
          Not only do these devices not do that, but we don't have the
          infrastructure yet to handle that at all.
      
          Fixes from Vlad Yasevich.
      
       2) Fix tcpdump crash with bridging and vlans, also from Vlad.
      
       3) Some MAINTAINERS updates for random32 and bonding.
      
       4) Fix late reseeds of prandom generator, from Sasha Levin.
      
       5) Bridge doesn't handle stacked vlans properly, fix from Toshiaki
          Makita.
      
       6) Fix deadlock in openvswitch, from Flavio Leitner.
      
       7) get_timewait4_sock() doesn't report delay times correctly, fix from
          Eric Dumazet.
      
       8) Duplicate address detection and addrconf verification need to run in
          contexts where RTNL can be obtained.  Move them to run from a
          workqueue.  From Hannes Frederic Sowa.
      
       9) Fix route refcount leaking in ip tunnels, from Pravin B Shelar.
      
      10) Don't return -EINTR from non-blocking recvmsg() on AF_UNIX sockets,
          from Eric Dumazet.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (28 commits)
        vlan: Warn the user if lowerdev has bad vlan features.
        veth: Turn off vlan rx acceleration in vlan_features
        ifb: Remove vlan acceleration from vlan_features
        qlge: Do not propaged vlan tag offloads to vlans
        bridge: Fix crash with vlan filtering and tcpdump
        net: Account for all vlan headers in skb_mac_gso_segment
        MAINTAINERS: bonding: change email address
        MAINTAINERS: bonding: change email address
        ipv6: move DAD and addrconf_verify processing to workqueue
        tcp: fix get_timewait4_sock() delay computation on 64bit
        openvswitch: fix a possible deadlock and lockdep warning
        bridge: Fix handling stacked vlan tags
        bridge: Fix inabillity to retrieve vlan tags when tx offload is disabled
        vhost: validate vhost_get_vq_desc return value
        vhost: fix total length when packets are too short
        random32: avoid attempt to late reseed if in the middle of seeding
        random32: assign to network folks in MAINTAINERS
        net/mlx4_core: pass pci_device_id.driver_data to __mlx4_init_one during reset
        core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors
        vlan: Set hard_header_len according to available acceleration
        ...
      49d8137a
    • David S. Miller's avatar
      Merge branch 'vlan_offloads' · 5f2feca2
      David S. Miller authored
      Vlad Yasevich says:
      
      ====================
      Audit all drivers for correct vlan_features.
      
      Some drivers set vlan acceleration features in vlan_features.  This causes
      issues with Q-in-Q/802.1ad configurations.
      
      Audit all the drivers for correct vlan_features.  Fix broken ones.
      Add a warning to vlan code to help catch future offenders.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5f2feca2
    • Vlad Yasevich's avatar
      vlan: Warn the user if lowerdev has bad vlan features. · 2adb956b
      Vlad Yasevich authored
      Some drivers incorrectly assign vlan acceleration features to
      vlan_features thus causing issues for Q-in-Q vlan configurations.
      Warn the user of such cases.
      Signed-off-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2adb956b
    • Vlad Yasevich's avatar
      veth: Turn off vlan rx acceleration in vlan_features · 3f8c707b
      Vlad Yasevich authored
      For completeness, turn off vlan rx acceleration in vlan_features so
      that it doesn't show up on q-in-q setups.
      Signed-off-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3f8c707b
    • Vlad Yasevich's avatar
      ifb: Remove vlan acceleration from vlan_features · 8dd6e147
      Vlad Yasevich authored
      Do not include vlan acceleration features in vlan_features as that
      precludes correct Q-in-Q operation.
      Signed-off-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8dd6e147
    • Vlad Yasevich's avatar
      qlge: Do not propaged vlan tag offloads to vlans · f6d1ac4b
      Vlad Yasevich authored
      qlge driver turns off NETIF_F_HW_CTAG_FILTER, but forgets to
      turn off HW_CTAG_TX and HW_CTAG_RX on vlan devices.  With the
      current settings, q-in-q will only generate a single vlan header.
      Remember to mask off CTAG_TX and CTAG_RX features in vlan_features.
      
      CC: Shahed Shaikh <shahed.shaikh@qlogic.com>
      CC: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
      CC: Ron Mercer <ron.mercer@qlogic.com>
      Signed-off-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Acked-by: default avatarJitendra Kalsaria <jitendra.kalsaria@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f6d1ac4b
    • Vlad Yasevich's avatar
      bridge: Fix crash with vlan filtering and tcpdump · fc92f745
      Vlad Yasevich authored
      When the vlan filtering is enabled on the bridge, but
      the filter is not configured on the bridge device itself,
      running tcpdump on the bridge device will result in a
      an Oops with NULL pointer dereference.  The reason
      is that br_pass_frame_up() will bypass the vlan
      check because promisc flag is set.  It will then try
      to get the table pointer and process the packet based
      on the table.  Since the table pointer is NULL, we oops.
      Catch this special condition in br_handle_vlan().
      Reported-by: default avatarToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      CC: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      Signed-off-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Acked-by: default avatarToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fc92f745
    • Vlad Yasevich's avatar
      net: Account for all vlan headers in skb_mac_gso_segment · 53d6471c
      Vlad Yasevich authored
      skb_network_protocol() already accounts for multiple vlan
      headers that may be present in the skb.  However, skb_mac_gso_segment()
      doesn't know anything about it and assumes that skb->mac_len
      is set correctly to skip all mac headers.  That may not
      always be the case.  If we are simply forwarding the packet (via
      bridge or macvtap), all vlan headers may not be accounted for.
      
      A simple solution is to allow skb_network_protocol to return
      the vlan depth it has calculated.  This way skb_mac_gso_segment
      will correctly skip all mac headers.
      Signed-off-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      53d6471c
    • Veaceslav Falico's avatar
      898602a0
    • Jay Vosburgh's avatar
      MAINTAINERS: bonding: change email address · 79b30750
      Jay Vosburgh authored
      Update my email address.
      Signed-off-by: default avatarJay Vosburgh <fubar@us.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      79b30750
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew Morton) · bc53267e
      Linus Torvalds authored
      Merge two fixes from Andrew Morton:
       "The x86 fix should come from x86 guys but they appear to be
        conferencing or otherwise distracted.
      
        The ocfs2 fix is a bit of a mess - the code runs into an immediate
        NULL deref and we're trying to work out how this got through test and
        review, but we haven't heard from Goldwyn in the past few days.
        Sasha's patch fixes the oops, but the feature as a whole is probably
        broken.  So this is a stopgap for 3.14 - I'll aim to get the real
        fixes into 3.14.x"
      
      * emailed patches from Andrew Morton akpm@linux-foundation.org>:
        x86: fix boot on uniprocessor systems
        ocfs2: check if cluster name exists before deref
      bc53267e
    • Artem Fetishev's avatar
      x86: fix boot on uniprocessor systems · 825600c0
      Artem Fetishev authored
      On x86 uniprocessor systems topology_physical_package_id() returns -1
      which causes rapl_cpu_prepare() to leave rapl_pmu variable uninitialized
      which leads to GPF in rapl_pmu_init().
      
      See arch/x86/kernel/cpu/perf_event_intel_rapl.c.
      
      It turns out that physical_package_id and core_id can actually be
      retreived for uniprocessor systems too.  Enabling them also fixes
      rapl_pmu code.
      Signed-off-by: default avatarArtem Fetishev <artem_fetishev@epam.com>
      Cc: Stephane Eranian <eranian@google.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      825600c0
    • Sasha Levin's avatar
      ocfs2: check if cluster name exists before deref · d9060742
      Sasha Levin authored
      Commit c74a3bdd ("ocfs2: add clustername to cluster connection") is
      trying to strlcpy a string which was explicitly passed as NULL in the
      very same patch, triggering a NULL ptr deref.
      
        BUG: unable to handle kernel NULL pointer dereference at           (null)
        IP: strlcpy (lib/string.c:388 lib/string.c:151)
        CPU: 19 PID: 19426 Comm: trinity-c19 Tainted: G        W     3.14.0-rc7-next-20140325-sasha-00014-g9476368-dirty #274
        RIP:  strlcpy (lib/string.c:388 lib/string.c:151)
        Call Trace:
         ocfs2_cluster_connect (fs/ocfs2/stackglue.c:350)
         ocfs2_cluster_connect_agnostic (fs/ocfs2/stackglue.c:396)
         user_dlm_register (fs/ocfs2/dlmfs/userdlm.c:679)
         dlmfs_mkdir (fs/ocfs2/dlmfs/dlmfs.c:503)
         vfs_mkdir (fs/namei.c:3467)
         SyS_mkdirat (fs/namei.c:3488 fs/namei.c:3472)
         tracesys (arch/x86/kernel/entry_64.S:749)
      
      akpm: this patch probably disables the feature.  A temporary thing to
      avoid triviel oopses.
      Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
      Cc: Mark Fasheh <mfasheh@suse.de>
      Cc: Joel Becker <jlbec@evilplan.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d9060742
    • Hannes Frederic Sowa's avatar
      ipv6: move DAD and addrconf_verify processing to workqueue · c15b1cca
      Hannes Frederic Sowa authored
      addrconf_join_solict and addrconf_join_anycast may cause actions which
      need rtnl locked, especially on first address creation.
      
      A new DAD state is introduced which defers processing of the initial
      DAD processing into a workqueue.
      
      To get rtnl lock we need to push the code paths which depend on those
      calls up to workqueues, specifically addrconf_verify and the DAD
      processing.
      
      (v2)
      addrconf_dad_failure needs to be queued up to the workqueue, too. This
      patch introduces a new DAD state and stop the DAD processing in the
      workqueue (this is because of the possible ipv6_del_addr processing
      which removes the solicited multicast address from the device).
      
      addrconf_verify_lock is removed, too. After the transition it is not
      needed any more.
      
      As we are not processing in bottom half anymore we need to be a bit more
      careful about disabling bottom half out when we lock spin_locks which are also
      used in bh.
      
      Relevant backtrace:
      [  541.030090] RTNL: assertion failed at net/core/dev.c (4496)
      [  541.031143] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O 3.10.33-1-amd64-vyatta #1
      [  541.031145] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
      [  541.031146]  ffffffff8148a9f0 000000000000002f ffffffff813c98c1 ffff88007c4451f8
      [  541.031148]  0000000000000000 0000000000000000 ffffffff813d3540 ffff88007fc03d18
      [  541.031150]  0000880000000006 ffff88007c445000 ffffffffa0194160 0000000000000000
      [  541.031152] Call Trace:
      [  541.031153]  <IRQ>  [<ffffffff8148a9f0>] ? dump_stack+0xd/0x17
      [  541.031180]  [<ffffffff813c98c1>] ? __dev_set_promiscuity+0x101/0x180
      [  541.031183]  [<ffffffff813d3540>] ? __hw_addr_create_ex+0x60/0xc0
      [  541.031185]  [<ffffffff813cfe1a>] ? __dev_set_rx_mode+0xaa/0xc0
      [  541.031189]  [<ffffffff813d3a81>] ? __dev_mc_add+0x61/0x90
      [  541.031198]  [<ffffffffa01dcf9c>] ? igmp6_group_added+0xfc/0x1a0 [ipv6]
      [  541.031208]  [<ffffffff8111237b>] ? kmem_cache_alloc+0xcb/0xd0
      [  541.031212]  [<ffffffffa01ddcd7>] ? ipv6_dev_mc_inc+0x267/0x300 [ipv6]
      [  541.031216]  [<ffffffffa01c2fae>] ? addrconf_join_solict+0x2e/0x40 [ipv6]
      [  541.031219]  [<ffffffffa01ba2e9>] ? ipv6_dev_ac_inc+0x159/0x1f0 [ipv6]
      [  541.031223]  [<ffffffffa01c0772>] ? addrconf_join_anycast+0x92/0xa0 [ipv6]
      [  541.031226]  [<ffffffffa01c311e>] ? __ipv6_ifa_notify+0x11e/0x1e0 [ipv6]
      [  541.031229]  [<ffffffffa01c3213>] ? ipv6_ifa_notify+0x33/0x50 [ipv6]
      [  541.031233]  [<ffffffffa01c36c8>] ? addrconf_dad_completed+0x28/0x100 [ipv6]
      [  541.031241]  [<ffffffff81075c1d>] ? task_cputime+0x2d/0x50
      [  541.031244]  [<ffffffffa01c38d6>] ? addrconf_dad_timer+0x136/0x150 [ipv6]
      [  541.031247]  [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6]
      [  541.031255]  [<ffffffff8105313a>] ? call_timer_fn.isra.22+0x2a/0x90
      [  541.031258]  [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6]
      
      Hunks and backtrace stolen from a patch by Stephen Hemminger.
      Reported-by: default avatarStephen Hemminger <stephen@networkplumber.org>
      Signed-off-by: default avatarStephen Hemminger <stephen@networkplumber.org>
      Signed-off-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c15b1cca
    • Eric Dumazet's avatar
      tcp: fix get_timewait4_sock() delay computation on 64bit · e2a1d3e4
      Eric Dumazet authored
      It seems I missed one change in get_timewait4_sock() to compute
      the remaining time before deletion of IPV4 timewait socket.
      
      This could result in wrong output in /proc/net/tcp for tm->when field.
      
      Fixes: 96f817fe ("tcp: shrink tcp6_timewait_sock by one cache line")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e2a1d3e4
    • Flavio Leitner's avatar
      openvswitch: fix a possible deadlock and lockdep warning · 4f647e0a
      Flavio Leitner authored
      There are two problematic situations.
      
      A deadlock can happen when is_percpu is false because it can get
      interrupted while holding the spinlock. Then it executes
      ovs_flow_stats_update() in softirq context which tries to get
      the same lock.
      
      The second sitation is that when is_percpu is true, the code
      correctly disables BH but only for the local CPU, so the
      following can happen when locking the remote CPU without
      disabling BH:
      
             CPU#0                            CPU#1
        ovs_flow_stats_get()
         stats_read()
       +->spin_lock remote CPU#1        ovs_flow_stats_get()
       |  <interrupted>                  stats_read()
       |  ...                       +-->  spin_lock remote CPU#0
       |                            |     <interrupted>
       |  ovs_flow_stats_update()   |     ...
       |   spin_lock local CPU#0 <--+     ovs_flow_stats_update()
       +---------------------------------- spin_lock local CPU#1
      
      This patch disables BH for both cases fixing the deadlocks.
      Acked-by: default avatarJesse Gross <jesse@nicira.com>
      
      =================================
      [ INFO: inconsistent lock state ]
      3.14.0-rc8-00007-g632b06aa #1 Tainted: G          I
      ---------------------------------
      inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
      swapper/0/0 [HC0[0]:SC1[5]:HE1:SE0] takes:
      (&(&cpu_stats->lock)->rlock){+.?...}, at: [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch]
      {SOFTIRQ-ON-W} state was registered at:
      [<ffffffff810f973f>] __lock_acquire+0x68f/0x1c40
      [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0
      [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80
      [<ffffffffa05dd9e4>] ovs_flow_stats_get+0xc4/0x1e0 [openvswitch]
      [<ffffffffa05da855>] ovs_flow_cmd_fill_info+0x185/0x360 [openvswitch]
      [<ffffffffa05daf05>] ovs_flow_cmd_build_info.constprop.27+0x55/0x90 [openvswitch]
      [<ffffffffa05db41d>] ovs_flow_cmd_new_or_set+0x4dd/0x570 [openvswitch]
      [<ffffffff816c245d>] genl_family_rcv_msg+0x1cd/0x3f0
      [<ffffffff816c270e>] genl_rcv_msg+0x8e/0xd0
      [<ffffffff816c0239>] netlink_rcv_skb+0xa9/0xc0
      [<ffffffff816c0798>] genl_rcv+0x28/0x40
      [<ffffffff816bf830>] netlink_unicast+0x100/0x1e0
      [<ffffffff816bfc57>] netlink_sendmsg+0x347/0x770
      [<ffffffff81668e9c>] sock_sendmsg+0x9c/0xe0
      [<ffffffff816692d9>] ___sys_sendmsg+0x3a9/0x3c0
      [<ffffffff8166a911>] __sys_sendmsg+0x51/0x90
      [<ffffffff8166a962>] SyS_sendmsg+0x12/0x20
      [<ffffffff817e3ce9>] system_call_fastpath+0x16/0x1b
      irq event stamp: 1740726
      hardirqs last  enabled at (1740726): [<ffffffff8175d5e0>] ip6_finish_output2+0x4f0/0x840
      hardirqs last disabled at (1740725): [<ffffffff8175d59b>] ip6_finish_output2+0x4ab/0x840
      softirqs last  enabled at (1740674): [<ffffffff8109be12>] _local_bh_enable+0x22/0x50
      softirqs last disabled at (1740675): [<ffffffff8109db05>] irq_exit+0xc5/0xd0
      
      other info that might help us debug this:
       Possible unsafe locking scenario:
      
             CPU0
             ----
        lock(&(&cpu_stats->lock)->rlock);
        <Interrupt>
          lock(&(&cpu_stats->lock)->rlock);
      
       *** DEADLOCK ***
      
      5 locks held by swapper/0/0:
       #0:  (((&ifa->dad_timer))){+.-...}, at: [<ffffffff810a7155>] call_timer_fn+0x5/0x320
       #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff81788a55>] mld_sendpack+0x5/0x4a0
       #2:  (rcu_read_lock_bh){.+....}, at: [<ffffffff8175d149>] ip6_finish_output2+0x59/0x840
       #3:  (rcu_read_lock_bh){.+....}, at: [<ffffffff8168ba75>] __dev_queue_xmit+0x5/0x9b0
       #4:  (rcu_read_lock){.+.+..}, at: [<ffffffffa05e41b5>] internal_dev_xmit+0x5/0x110 [openvswitch]
      
      stack backtrace:
      CPU: 0 PID: 0 Comm: swapper/0 Tainted: G          I  3.14.0-rc8-00007-g632b06aa #1
      Hardware name:                  /DX58SO, BIOS SOX5810J.86A.5599.2012.0529.2218 05/29/2012
       0000000000000000 0fcf20709903df0c ffff88042d603808 ffffffff817cfe3c
       ffffffff81c134c0 ffff88042d603858 ffffffff817cb6da 0000000000000005
       ffffffff00000001 ffff880400000000 0000000000000006 ffffffff81c134c0
      Call Trace:
       <IRQ>  [<ffffffff817cfe3c>] dump_stack+0x4d/0x66
       [<ffffffff817cb6da>] print_usage_bug+0x1f4/0x205
       [<ffffffff810f7f10>] ? check_usage_backwards+0x180/0x180
       [<ffffffff810f8963>] mark_lock+0x223/0x2b0
       [<ffffffff810f96d3>] __lock_acquire+0x623/0x1c40
       [<ffffffff810f5707>] ? __lock_is_held+0x57/0x80
       [<ffffffffa05e26c6>] ? masked_flow_lookup+0x236/0x250 [openvswitch]
       [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0
       [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch]
       [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80
       [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch]
       [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch]
       [<ffffffffa05dcc64>] ovs_dp_process_received_packet+0x84/0x120 [openvswitch]
       [<ffffffff810f93f7>] ? __lock_acquire+0x347/0x1c40
       [<ffffffffa05e3bea>] ovs_vport_receive+0x2a/0x30 [openvswitch]
       [<ffffffffa05e4218>] internal_dev_xmit+0x68/0x110 [openvswitch]
       [<ffffffffa05e41b5>] ? internal_dev_xmit+0x5/0x110 [openvswitch]
       [<ffffffff8168b4a6>] dev_hard_start_xmit+0x2e6/0x8b0
       [<ffffffff8168be87>] __dev_queue_xmit+0x417/0x9b0
       [<ffffffff8168ba75>] ? __dev_queue_xmit+0x5/0x9b0
       [<ffffffff8175d5e0>] ? ip6_finish_output2+0x4f0/0x840
       [<ffffffff8168c430>] dev_queue_xmit+0x10/0x20
       [<ffffffff8175d641>] ip6_finish_output2+0x551/0x840
       [<ffffffff8176128a>] ? ip6_finish_output+0x9a/0x220
       [<ffffffff8176128a>] ip6_finish_output+0x9a/0x220
       [<ffffffff8176145f>] ip6_output+0x4f/0x1f0
       [<ffffffff81788c29>] mld_sendpack+0x1d9/0x4a0
       [<ffffffff817895b8>] mld_send_initial_cr.part.32+0x88/0xa0
       [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
       [<ffffffff8178e301>] ipv6_mc_dad_complete+0x31/0x50
       [<ffffffff817690d7>] addrconf_dad_completed+0x147/0x220
       [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
       [<ffffffff8176934f>] addrconf_dad_timer+0x19f/0x1c0
       [<ffffffff810a71e9>] call_timer_fn+0x99/0x320
       [<ffffffff810a7155>] ? call_timer_fn+0x5/0x320
       [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
       [<ffffffff810a76c4>] run_timer_softirq+0x254/0x3b0
       [<ffffffff8109d47d>] __do_softirq+0x12d/0x480
      Signed-off-by: default avatarFlavio Leitner <fbl@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f647e0a
    • Toshiaki Makita's avatar
      bridge: Fix handling stacked vlan tags · 99b192da
      Toshiaki Makita authored
      If a bridge with vlan_filtering enabled receives frames with stacked
      vlan tags, i.e., they have two vlan tags, br_vlan_untag() strips not
      only the outer tag but also the inner tag.
      
      br_vlan_untag() is called only from br_handle_vlan(), and in this case,
      it is enough to set skb->vlan_tci to 0 here, because vlan_tci has already
      been set before calling br_handle_vlan().
      Signed-off-by: default avatarToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      Acked-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      99b192da
    • Toshiaki Makita's avatar
      bridge: Fix inabillity to retrieve vlan tags when tx offload is disabled · 12464bb8
      Toshiaki Makita authored
      Bridge vlan code (br_vlan_get_tag()) assumes that all frames have vlan_tci
      if they are tagged, but if vlan tx offload is manually disabled on bridge
      device and frames are sent from vlan device on the bridge device, the tags
      are embedded in skb->data and they break this assumption.
      Extract embedded vlan tags and move them to vlan_tci at ingress.
      Signed-off-by: default avatarToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      Acked-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      12464bb8
    • Michael S. Tsirkin's avatar
      vhost: validate vhost_get_vq_desc return value · a39ee449
      Michael S. Tsirkin authored
      vhost fails to validate negative error code
      from vhost_get_vq_desc causing
      a crash: we are using -EFAULT which is 0xfffffff2
      as vector size, which exceeds the allocated size.
      
      The code in question was introduced in commit
      8dd014ad
          vhost-net: mergeable buffers support
      
      CVE-2014-0055
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a39ee449
    • Michael S. Tsirkin's avatar
      vhost: fix total length when packets are too short · d8316f39
      Michael S. Tsirkin authored
      When mergeable buffers are disabled, and the
      incoming packet is too large for the rx buffer,
      get_rx_bufs returns success.
      
      This was intentional in order for make recvmsg
      truncate the packet and then handle_rx would
      detect err != sock_len and drop it.
      
      Unfortunately we pass the original sock_len to
      recvmsg - which means we use parts of iov not fully
      validated.
      
      Fix this up by detecting this overrun and doing packet drop
      immediately.
      
      CVE-2014-0077
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d8316f39