- 21 Oct, 2017 40 commits
-
-
Greg Kroah-Hartman authored
-
Manu Gautam authored
commit 40d829fb upstream. The PIDs for Isochronous data transfers are incorrect for high bandwidth IN endpoints when the request length is less than EP wMaxPacketSize. As per spec correct PIDs for ISOC data transfers are: 1) For request length <= maxpacket - DATA0, 2) For maxpacket < length <= (2 * maxpacket) - DATA1, DATA0 3) For (2 * maxpacket) < length <= (3 * maxpacket) - DATA2, DATA1, DATA0. But driver always sets PCM fields based on wMaxPacketSize due to which DATA2 happens even for small requests. Fix this by setting the PCM field of trb->size depending on request length rather than fixing it to the value depending on wMaxPacketSize. Ideally it shouldn't give any issues as dwc3 will send 0-length packet for next IN token if host sends (even after receiving a short packet). Windows seems to ignore this but with MacOS frame loss observed when using f_uvc. Signed-off-by:
Manu Gautam <mgautam@codeaurora.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> [b-liu@ti.com added following change for v4.9.] - unsigned int maxp = usb_endpoint_maxp(ep->desc); + unsigned int maxp; + maxp = usb_endpoint_maxp(ep->desc) & 0x07ff; Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
[ Upstream commit a578884f ] Without the Kconfig dependency, we can get this warning: warning: ACPI_CPPC_CPUFREQ selects ACPI_CPPC_LIB which has unmet direct dependencies (ACPI && ACPI_PROCESSOR) Fixes: 5477fb3b (ACPI / CPPC: Add a CPUFreq driver for use with CPPC) Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Yazen Ghannam authored
[ Upstream commit 75bf2f64 ] Currently, the IPID and Syndrome are printed on the same line as the Address. There are cases when we can have a valid Syndrome but not a valid Address. For example, the MCA_SYND register can be used to hold more detailed error info that the hardware folks can use. It's not just DRAM ECC syndromes. There are some error types that aren't related to memory that may have valid syndromes, like some errors related to links in the Data Fabric, etc. In these cases, the IPID and Syndrome are not printed at the same log level as the rest of the stanza, so users won't see them on the console. Console: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Dmesg: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b , Syndrome: 0x000000010b404000, IPID: 0x0001002e00000002 [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Print the IPID first and on a new line. The IPID should always be printed on SMCA systems. The Syndrome will then be printed with the IPID and at the same log level when valid: [Hardware Error]: CPU:16 (17:1:0) MC22_STATUS[Over|CE|MiscV|-|-|-|-|SyndV|-]: 0xd82000000002080b [Hardware Error]: IPID: 0x0001002e00000002, Syndrome: 0x000000010b404000 [Hardware Error]: Power, Interrupts, etc. Extended Error Code: 2 Signed-off-by:
Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1487192182-2474-1-git-send-email-Yazen.Ghannam@amd.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Jeffy Chen authored
[ Upstream commit 9af02d86 ] It's much the same as what we did for mwifiex in: b9da4d22 mwifiex: avoid double-disable_irq() race "We have a race where the wakeup IRQ might be in flight while we're calling mwifiex_disable_wake() from resume(). This can leave us disabling the IRQ twice. Let's disable the IRQ and enable it in case if we have double-disabled it." Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Javier Martinez Canillas authored
[ Upstream commit 3827b64d ] After commit 66d228a2 ("regulator: core: Don't use regulators as supplies until the parent is bound"), input supplies aren't resolved if the input supplies parent device has not been bound. This prevent regulators to hold an invalid reference if its supply parent device driver probe is deferred. But this causes issues on some boards where a PMIC's regulator use as input supply a regulator from another PMIC whose driver is registered after the driver for the former. In this case the regulators for the first PMIC will fail to resolve input supplies on regulators registration (since the other PMIC wasn't probed yet). And when the core attempts to resolve again latter when the other PMIC registers its own regulators, it will fail again since the parent device isn't bound yet. This will cause some parent supplies to never be resolved and wrongly be disabled on boot due taking them as unused. To solve this problem, also attempt to resolve the pending regulators input supplies before disabling the unused regulators. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit 1894054d ] Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Madhavan Srinivasan authored
[ Upstream commit 8d911904 ] PMC5 on POWER9 DD1 may not provide right counts in all sampling scenarios, hence use PM_INST_DISP event instead in PMC2 or PMC3 in preference. Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Kinglong Mee authored
[ Upstream commit f7d1ddbe ] The rpccred gotten from rpc_lookup_machine_cred() should be put when state is shutdown. Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 336a9cde ] commit 82e88ff1 ("hrtimer: Revert CLOCK_MONOTONIC_RAW support") removed unfortunately a sanity check in the hrtimer code which was part of that MONOTONIC_RAW patch series. It would have caught the bogus usage of CLOCK_MONOTONIC_RAW in the wireless code. So bring it back. It is way too easy to take any random clockid and feed it to the hrtimer subsystem. At best, it gets mapped to a monotonic base, but it would be better to just catch illegal values as early as possible. Detect invalid clockids, map them to CLOCK_MONOTONIC and emit a warning. [ tglx: Replaced the BUG by a WARN and gracefully map to CLOCK_MONOTONIC ] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Link: http://lkml.kernel.org/r/1452879670-16133-3-git-send-email-marc.zyngier@arm.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Varun Prakash authored
[ Upstream commit 4d65491c ] In case of unsolicited data for the first sequence seq_end_offset must be set to minimum of total data length and FirstBurstLength, so do not add cmd->write_data_done to the min of total data length and FirstBurstLength. This patch avoids that with ImmediateData=Yes, InitialR2T=No, MaxXmitDataSegmentLength < FirstBurstLength that a WRITE command with IO size above FirstBurstLength triggers sequence error messages, for example Set following parameters on target (linux-4.8.12) ImmediateData = Yes InitialR2T = No MaxXmitDataSegmentLength = 8k FirstBurstLength = 64k Log in from Open iSCSI initiator and execute dd if=/dev/zero of=/dev/sdb bs=128k count=1 oflag=direct Error messages on target Command ITT: 0x00000035 with Offset: 65536, Length: 8192 outside of Sequence 73728:131072 while DataSequenceInOrder=Yes. Command ITT: 0x00000035, received DataSN: 0x00000001 higher than expected 0x00000000. Unable to perform within-command recovery while ERL=0. Signed-off-by:
Varun Prakash <varun@chelsio.com> [ bvanassche: Use min() instead of open-coding it / edited patch description ] Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Sebastian Sanchez authored
[ Upstream commit b448bf9a ] There are some memory allocation calls in hfi1_create_ctxtdata() that do not use the numa function parameter. This can cause cache lines to be filled over QPI. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Easwar Hariharan authored
[ Upstream commit 39e2afa8 ] After extended testing, it was found that the previous PCIe Gen 3 recipe, which used adaptive CTLE with Preset 4, could cause an NMI/Surprise Link Down in about 1 in 100 to 1 in 1000 power cycles on some platforms. New EV data combined with extensive empirical data indicates that the new recipe should use static CTLE with Preset 6 for all integrated silicon SKUs. Fixes: c3f8de0b ("IB/hfi1: Add static PCIe Gen3 CTLE tuning") Reviewed-by:
Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit 72aa107d ] Include <linux/in6.h> to fix the following linux/mroute6.h userspace compilation errors: /usr/include/linux/mroute6.h:80:22: error: field 'mf6cc_origin' has incomplete type struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */ /usr/include/linux/mroute6.h:81:22: error: field 'mf6cc_mcastgrp' has incomplete type struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */ /usr/include/linux/mroute6.h:91:22: error: field 'src' has incomplete type struct sockaddr_in6 src; /usr/include/linux/mroute6.h:92:22: error: field 'grp' has incomplete type struct sockaddr_in6 grp; /usr/include/linux/mroute6.h:132:18: error: field 'im6_src' has incomplete type struct in6_addr im6_src, im6_dst; /usr/include/linux/mroute6.h:132:27: error: field 'im6_dst' has incomplete type struct in6_addr im6_src, im6_dst; Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit feb0869d ] Consistently use types from linux/types.h to fix the following linux/rds.h userspace compilation errors: /usr/include/linux/rds.h:106:2: error: unknown type name 'uint8_t' uint8_t name[32]; /usr/include/linux/rds.h:107:2: error: unknown type name 'uint64_t' uint64_t value; /usr/include/linux/rds.h:117:2: error: unknown type name 'uint64_t' uint64_t next_tx_seq; /usr/include/linux/rds.h:118:2: error: unknown type name 'uint64_t' uint64_t next_rx_seq; /usr/include/linux/rds.h:121:2: error: unknown type name 'uint8_t' uint8_t transport[TRANSNAMSIZ]; /* null term ascii */ /usr/include/linux/rds.h:122:2: error: unknown type name 'uint8_t' uint8_t flags; /usr/include/linux/rds.h:129:2: error: unknown type name 'uint64_t' uint64_t seq; /usr/include/linux/rds.h:130:2: error: unknown type name 'uint32_t' uint32_t len; /usr/include/linux/rds.h:135:2: error: unknown type name 'uint8_t' uint8_t flags; /usr/include/linux/rds.h:139:2: error: unknown type name 'uint32_t' uint32_t sndbuf; /usr/include/linux/rds.h:144:2: error: unknown type name 'uint32_t' uint32_t rcvbuf; /usr/include/linux/rds.h:145:2: error: unknown type name 'uint64_t' uint64_t inum; /usr/include/linux/rds.h:153:2: error: unknown type name 'uint64_t' uint64_t hdr_rem; /usr/include/linux/rds.h:154:2: error: unknown type name 'uint64_t' uint64_t data_rem; /usr/include/linux/rds.h:155:2: error: unknown type name 'uint32_t' uint32_t last_sent_nxt; /usr/include/linux/rds.h:156:2: error: unknown type name 'uint32_t' uint32_t last_expected_una; /usr/include/linux/rds.h:157:2: error: unknown type name 'uint32_t' uint32_t last_seen_una; /usr/include/linux/rds.h:164:2: error: unknown type name 'uint8_t' uint8_t src_gid[RDS_IB_GID_LEN]; /usr/include/linux/rds.h:165:2: error: unknown type name 'uint8_t' uint8_t dst_gid[RDS_IB_GID_LEN]; /usr/include/linux/rds.h:167:2: error: unknown type name 'uint32_t' uint32_t max_send_wr; /usr/include/linux/rds.h:168:2: error: unknown type name 'uint32_t' uint32_t max_recv_wr; /usr/include/linux/rds.h:169:2: error: unknown type name 'uint32_t' uint32_t max_send_sge; /usr/include/linux/rds.h:170:2: error: unknown type name 'uint32_t' uint32_t rdma_mr_max; /usr/include/linux/rds.h:171:2: error: unknown type name 'uint32_t' uint32_t rdma_mr_size; /usr/include/linux/rds.h:212:9: error: unknown type name 'uint64_t' typedef uint64_t rds_rdma_cookie_t; /usr/include/linux/rds.h:215:2: error: unknown type name 'uint64_t' uint64_t addr; /usr/include/linux/rds.h:216:2: error: unknown type name 'uint64_t' uint64_t bytes; /usr/include/linux/rds.h:221:2: error: unknown type name 'uint64_t' uint64_t cookie_addr; /usr/include/linux/rds.h:222:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:228:2: error: unknown type name 'uint64_t' uint64_t cookie_addr; /usr/include/linux/rds.h:229:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:234:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:240:2: error: unknown type name 'uint64_t' uint64_t local_vec_addr; /usr/include/linux/rds.h:241:2: error: unknown type name 'uint64_t' uint64_t nr_local; /usr/include/linux/rds.h:242:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:243:2: error: unknown type name 'uint64_t' uint64_t user_token; /usr/include/linux/rds.h:248:2: error: unknown type name 'uint64_t' uint64_t local_addr; /usr/include/linux/rds.h:249:2: error: unknown type name 'uint64_t' uint64_t remote_addr; /usr/include/linux/rds.h:252:4: error: unknown type name 'uint64_t' uint64_t compare; /usr/include/linux/rds.h:253:4: error: unknown type name 'uint64_t' uint64_t swap; /usr/include/linux/rds.h:256:4: error: unknown type name 'uint64_t' uint64_t add; /usr/include/linux/rds.h:259:4: error: unknown type name 'uint64_t' uint64_t compare; /usr/include/linux/rds.h:260:4: error: unknown type name 'uint64_t' uint64_t swap; /usr/include/linux/rds.h:261:4: error: unknown type name 'uint64_t' uint64_t compare_mask; /usr/include/linux/rds.h:262:4: error: unknown type name 'uint64_t' uint64_t swap_mask; /usr/include/linux/rds.h:265:4: error: unknown type name 'uint64_t' uint64_t add; /usr/include/linux/rds.h:266:4: error: unknown type name 'uint64_t' uint64_t nocarry_mask; /usr/include/linux/rds.h:269:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:270:2: error: unknown type name 'uint64_t' uint64_t user_token; /usr/include/linux/rds.h:274:2: error: unknown type name 'uint64_t' uint64_t user_token; /usr/include/linux/rds.h:275:2: error: unknown type name 'int32_t' int32_t status; Signed-off-by:
-
Jeff Layton authored
[ Upstream commit c6b0b656 ] While we hold a reference to the dentry when build_dentry_path is called, we could end up racing with a rename that changes d_parent. Handle that situation correctly, by using the rcu_read_lock to ensure that the parent dentry and inode stick around long enough to safely check ceph_snap and ceph_ino. Link: http://tracker.ceph.com/issues/18148Signed-off-by:
Jeff Layton <jlayton@redhat.com> Reviewed-by:
Yan, Zheng <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Jeff Layton authored
[ Upstream commit 24c149ad ] sparse says: fs/ceph/ioctl.c:100:28: warning: cast to restricted __le64 preferred_osd is a __s64 so we don't need to do any conversion. Also, just remove the cast in ceph_ioctl_get_layout as it's not needed. Signed-off-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Jeff Layton authored
[ Upstream commit 80d025ff ] This if block updates the dentry lease even in the case where the MDS didn't grant one. Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit e3ccc921 ] When going to suspend, the I2C registers may be lost because the power to VDDcore is cut. Restore them when resuming. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit c5212b94 ] Currently the state is read only after the buffers are relesed. Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit c2dedf87 ] Reserving doorbell BAR space according to the currently active CPUs may result in a bug if disabled CPUs are later enabled but no doorbell space was reserved for them. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit afe981d6 ] Driver currently utilizes the same loop variable in two nested loops. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit 36fb7435 ] The mvpp2_txq_bufs_free() function is called upon TX completion to DMA unmap TX buffers, and free the corresponding SKBs. It gets the references to the SKB to free and the DMA buffer to unmap from a per-CPU txq_pcpu data structure. However, the code currently increments the pointer to the next entry before doing the DMA unmap and freeing the SKB. It does not cause any visible problem because for a given SKB the TX completion is guaranteed to take place on the CPU where the TX was started. However, it is much more logical to increment the pointer to the next entry once the current entry has been completely unmapped/released. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Nicolai Hähnle authored
[ Upstream commit 4694335d ] When the fast blit path fails while attempting to move a buffer from RAM to VRAM, we fall back to a CPU-based memcpy that cannot handle split VRAM buffers. Instead of crashing, simply fail the buffer move. Ideally, we would teach TTM about split buffers so that the fallback still works in this case, but that is quite involved. So for now, apply the simplest possible fix. Fixes: 40361bb1704b ("drm/amdgpu: add VRAM manager v2") Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 72cedf59 ] We should not select drivers that depend on I2C when that is disabled, as it results in a build error: warning: (SND_SOC_MT2701_CS42448) selects SND_SOC_CS42XX8_I2C which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC && I2C) sound/soc/codecs/cs42xx8-i2c.c:60:1: warning: data definition has no type or storage class module_i2c_driver(cs42xx8_i2c_driver); sound/soc/codecs/cs42xx8-i2c.c:60:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] Fixes: 1f458d53 ("ASoC: mediatek: Add mt2701-cs42448 driver and config option.") Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 4d7d39a1 ] We accidentally return an uninitialized variable on success. Fixes: b6ff1b14 ("[SCSI] scsi_dh: Update EMC handler") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Grygorii Maistrenko authored
[ Upstream commit c6e28895 ] In case CONFIG_SLUB_DEBUG_ON=n, find_mergeable() gets debug features from commandline but never checks if there are features from the SLAB_NEVER_MERGE set. As a result selected by slub_debug caches are always mergeable if they have been created without a custom constructor set or without one of the SLAB_* debug features on. This moves the SLAB_NEVER_MERGE check below the flags update from commandline to make sure it won't merge the slab cache if one of the debug features is on. Link: http://lkml.kernel.org/r/20170101124451.GA4740@lp-laptop-dSigned-off-by:
Grygorii Maistrenko <grygoriimkd@gmail.com> Reviewed-by:
Pekka Enberg <penberg@kernel.org> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Ren authored
[ Upstream commit 439a36b8 ] We are in the situation that we have to avoid recursive cluster locking, but there is no way to check if a cluster lock has been taken by a precess already. Mostly, we can avoid recursive locking by writing code carefully. However, we found that it's very hard to handle the routines that are invoked directly by vfs code. For instance: const struct inode_operations ocfs2_file_iops = { .permission = ocfs2_permission, .get_acl = ocfs2_iop_get_acl, .set_acl = ocfs2_iop_set_acl, }; Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR): do_sys_open may_open inode_permission ocfs2_permission ocfs2_inode_lock() <=== first time generic_permission get_acl ocfs2_iop_get_acl ocfs2_inode_lock() <=== recursive one A deadlock will occur if a remote EX request comes in between two of ocfs2_inode_lock(). Briefly describe how the deadlock is formed: On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in BAST(ocfs2_generic_handle_bast) when downconvert is started on behalf of the remote EX lock request. Another hand, the recursive cluster lock (the second one) will be blocked in in __ocfs2_cluster_lock() because of OCFS2_LOCK_BLOCKED. But, the downconvert never complete, why? because there is no chance for the first cluster lock on this node to be unlocked - we block ourselves in the code path. The idea to fix this issue is mostly taken from gfs2 code. 1. introduce a new field: struct ocfs2_lock_res.l_holders, to keep track of the processes' pid who has taken the cluster lock of this lock resource; 2. introduce a new flag for ocfs2_inode_lock_full: OCFS2_META_LOCK_GETBH; it means just getting back disk inode bh for us if we've got cluster lock. 3. export a helper: ocfs2_is_locked_by_me() is used to check if we have got the cluster lock in the upper code path. The tracking logic should be used by some of the ocfs2 vfs's callbacks, to solve the recursive locking issue cuased by the fact that vfs routines can call into each other. The performance penalty of processing the holder list should only be seen at a few cases where the tracking logic is used, such as get/set acl. You may ask what if the first time we got a PR lock, and the second time we want a EX lock? fortunately, this case never happens in the real world, as far as I can see, including permission check, (get|set)_(acl|attr), and the gfs2 code also do so. [sfr@canb.auug.org.au remove some inlines] Link: http://lkml.kernel.org/r/20170117100948.11657-2-zren@suse.comSigned-off-by:
Eric Ren <zren@suse.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Yasuaki Ishimatsu authored
[ Upstream commit ddffe98d ] To identify that pages of page table are allocated from bootmem allocator, magic number sets to page->lru.next. But page->lru list is initialized in reserve_bootmem_region(). So when calling free_pagetable(), the function cannot find the magic number of pages. And free_pagetable() frees the pages by free_reserved_page() not put_page_bootmem(). But if the pages are allocated from bootmem allocator and used as page table, the pages have private flag. So before freeing the pages, we should clear the private flag by put_page_bootmem(). Before applying the commit 7bfec6f4 ("mm, page_alloc: check multiple page fields with a single branch"), we could find the following visible issue: BUG: Bad page state in process kworker/u1024:1 page:ffffea103cfd8040 count:0 mapcount:0 mappi flags: 0x6fffff80000800(private) page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x800(private) <snip> Call Trace: [...] dump_stack+0x63/0x87 [...] bad_page+0x114/0x130 [...] free_pages_prepare+0x299/0x2d0 [...] free_hot_cold_page+0x31/0x150 [...] __free_pages+0x25/0x30 [...] free_pagetable+0x6f/0xb4 [...] remove_pagetable+0x379/0x7ff [...] vmemmap_free+0x10/0x20 [...] sparse_remove_one_section+0x149/0x180 [...] __remove_pages+0x2e9/0x4f0 [...] arch_remove_memory+0x63/0xc0 [...] remove_memory+0x8c/0xc0 [...] acpi_memory_device_remove+0x79/0xa5 [...] acpi_bus_trim+0x5a/0x8d [...] acpi_bus_trim+0x38/0x8d [...] acpi_device_hotplug+0x1b7/0x418 [...] acpi_hotplug_work_fn+0x1e/0x29 [...] process_one_work+0x152/0x400 [...] worker_thread+0x125/0x4b0 [...] kthread+0xd8/0xf0 [...] ret_from_fork+0x22/0x40 And the issue still silently occurs. Until freeing the pages of page table allocated from bootmem allocator, the page->freelist is never used. So the patch sets magic number to page->freelist instead of page->lru.next. [isimatu.yasuaki@jp.fujitsu.com: fix merge issue] Link: http://lkml.kernel.org/r/722b1cc4-93ac-dd8b-2be2-7a7e313b3b0b@gmail.com Link: http://lkml.kernel.org/r/2c29bd9f-5b67-02d0-18a3-8828e78bbb6f@gmail.comSigned-off-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by:
-
Milan Broz authored
[ Upstream commit 12cb3a1c ] Since the commit f1c131b4 crypto: xts - Convert to skcipher the XTS mode is based on ECB, so the mode must select ECB otherwise it can fail to initialize. Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Majd Dibbiny authored
[ Upstream commit 95f1ba9a ] In the VF driver, module parameter mlx4_log_num_mgm_entry_size was mistakenly overwritten -- and in a manner which overrode the device-managed flow steering option encoded in the parameter. log_num_mgm_entry_size is a global module parameter which affects all ConnectX-3 PFs installed on that host. If a VF changes log_num_mgm_entry_size, this will affect all PFs which are probed subsequent to the change (by disabling DMFS for those PFs). Fixes: 3c439b55 ("mlx4_core: Allow choosing flow steering mode") Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Reviewed-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Vijay Kumar authored
[ Upstream commit 7dd4fcf5 ] On panic, all other CPUs are stopped except the one which had hit panic. To keep console alive, we need to migrate hvcons irq to panicked CPU. Signed-off-by:
Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by:
-
Shaohua Li authored
[ Upstream commit d939cdfd ] Commit 03a9e24e(md linear: fix a race between linear_add() and linear_congested()) introduces the warnning. Acked-by:
Coly Li <colyli@suse.de> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Jaegeuk Kim authored
[ Upstream commit 86d54795 ] Otherwise we can get livelock like below. [79880.428136] dbench D 0 18405 18404 0x00000000 [79880.428139] Call Trace: [79880.428142] __schedule+0x219/0x6b0 [79880.428144] schedule+0x36/0x80 [79880.428147] schedule_timeout+0x243/0x2e0 [79880.428152] ? update_sd_lb_stats+0x16b/0x5f0 [79880.428155] ? ktime_get+0x3c/0xb0 [79880.428157] io_schedule_timeout+0xa6/0x110 [79880.428161] __lock_page+0xf7/0x130 [79880.428164] ? unlock_page+0x30/0x30 [79880.428167] pagecache_get_page+0x16b/0x250 [79880.428171] grab_cache_page_write_begin+0x20/0x40 [79880.428182] f2fs_write_begin+0xa2/0xdb0 [f2fs] [79880.428192] ? f2fs_mark_inode_dirty_sync+0x16/0x30 [f2fs] [79880.428197] ? kmem_cache_free+0x79/0x200 [79880.428203] ? __mark_inode_dirty+0x17f/0x360 [79880.428206] generic_perform_write+0xbb/0x190 [79880.428213] ? file_update_time+0xa4/0xf0 [79880.428217] __generic_file_write_iter+0x19b/0x1e0 [79880.428226] f2fs_file_write_iter+0x9c/0x180 [f2fs] [79880.428231] __vfs_write+0xc5/0x140 [79880.428235] vfs_write+0xb2/0x1b0 [79880.428238] SyS_write+0x46/0xa0 [79880.428242] entry_SYSCALL_64_fastpath+0x1e/0xad Fixes: cae96a5c8ab6 ("f2fs: check io submission more precisely") Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Robbie Ko authored
[ Upstream commit 4dd9920d ] Under certain situations, an incremental send operation can fail due to a premature attempt to create a new top level inode (a direct child of the subvolume/snapshot root) whose name collides with another inode that was removed from the send snapshot. Consider the following example scenario. Parent snapshot: . (ino 256, gen 8) |---- a1/ (ino 257, gen 9) |---- a2/ (ino 258, gen 9) Send snapshot: . (ino 256, gen 3) |---- a2/ (ino 257, gen 7) In this scenario, when receiving the incremental send stream, the btrfs receive command fails like this (ran in verbose mode, -vv argument): rmdir a1 mkfile o257-7-0 rename o257-7-0 -> a2 ERROR: rename o257-7-0 -> a2 failed: Is a directory What happens when computing the incremental send stream is: 1) An operation to remove the directory with inode number 257 and generation 9 is issued. 2) An operation to create the inode with number 257 and generation 7 is issued. This creates the inode with an orphanized name of "o257-7-0". 3) An operation rename the new inode 257 to its final name, "a2", is issued. This is incorrect because inode 258, which has the same name and it's a child of the same parent (root inode 256), was not yet processed and therefore no rmdir operation for it was yet issued. The rename operation is issued because we fail to detect that the name of the new inode 257 collides with inode 258, because their parent, a subvolume/snapshot root (inode 256) has a different generation in both snapshots. So fix this by ignoring the generation value of a parent directory that matches a root inode (number 256) when we are checking if the name of the inode currently being processed collides with the name of some other inode that was not yet processed. We can achieve this scenario of different inodes with the same number but different generation values either by mounting a filesystem with the inode cache option (-o inode_cache) or by creating and sending snapshots across different filesystems, like in the following example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/a1 $ mkdir /mnt/a2 $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/1.snap $ umount /mnt $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ touch /mnt/a2 $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs receive /mnt -f /tmp/1.snap # Take note that once the filesystem is created, its current # generation has value 7 so the inode from the second snapshot has # a generation value of 7. And after receiving the first snapshot # the filesystem is at a generation value of 10, because the call to # create the second snapshot bumps the generation to 8 (the snapshot # creation ioctl does a transaction commit), the receive command calls # the snapshot creation ioctl to create the first snapshot, which bumps # the filesystem's generation to 9, and finally when the receive # operation finishes it calls an ioctl to transition the first snapshot # (snap1) from RW mode to RO mode, which does another transaction commit # and bumps the filesystem's generation to 10. $ rm -f /tmp/1.snap $ btrfs send /mnt/snap1 -f /tmp/1.snap $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap $ umount /mnt $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ btrfs receive /mnt /tmp/1.snap # Receive of snapshot snap2 used to fail. $ btrfs receive /mnt /tmp/2.snap Signed-off-by:
Robbie Ko <robbieko@synology.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> [Rewrote changelog to be more precise and clear] Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit a499c3ea ] This is triggered during boot when CONFIG_SCHED_DEBUG is enabled: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 81 at kernel/sched/sched.h:812 set_next_entity+0x11d/0x380 rq->clock_update_flags < RQCF_ACT_SKIP CPU: 6 PID: 81 Comm: torture_shuffle Not tainted 4.10.0+ #1 Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016 Call Trace: dump_stack+0x85/0xc2 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 set_next_entity+0x11d/0x380 set_curr_task_fair+0x2b/0x60 do_set_cpus_allowed+0x139/0x180 __set_cpus_allowed_ptr+0x113/0x260 set_cpus_allowed_ptr+0x10/0x20 torture_shuffle+0xfd/0x180 kthread+0x10f/0x150 ? torture_shutdown_init+0x60/0x60 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x31/0x40 ---[ end trace dd94d92344cea9c6 ]--- The task is running && !queued, so there is no rq clock update before calling set_curr_task(). This patch fixes it by updating rq clock after holding rq->lock/pi_lock just as what other dequeue + put_prev + enqueue + set_curr story does. Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1487749975-5994-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Yunlong Song authored
[ Upstream commit 035e97ad ] In allocate_segment_by_default(), need_SSR() already detected it's time to do SSR. So, let's try to find victims for data segments more aggressively in time. Signed-off-by:
Yunlong Song <yunlong.song@huawei.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit ca1c39ef ] Reorder error handling labels in order to match the way resources have been allocated. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Jarno Rajahalme authored
[ Upstream commit 4b86c459 ] Commit 4dee62b1 ("netfilter: nf_ct_expect: nf_ct_expect_insert() returns void") inadvertently changed the successful return value of nf_ct_expect_related_report() from 0 to 1 due to __nf_ct_expect_check() returning 1 on success. Prevent this regression in the future by changing the return value of __nf_ct_expect_check() to 0 on success. Signed-off-by:
Jarno Rajahalme <jarno@ovn.org> Acked-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Michael Zoran authored
[ Upstream commit 6cf1bf63 ] The original github source allowed for the cache-line-size property to be missing. Since recent firmwares also require this property, it makes sense to always require it in the driver as well. If the cache-line-size property is missing, then the driver probe should fail as no dev since the kernel and dt may be out of sync. The fix is to add a check for the return value of of_property_read_u32. Changes V2: 1. Add error message if cache-line-size is missing. 2. Simple check for non-zero return value from of_property_read_u32. Signed-off-by:
Michael Zoran <mzoran@crowfest.net> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
