Pull remoteproc update from Ohad Ben-Cohen:

 - Remoteproc Recovery - by Fernando Guzman Lugo

   When a remote processor crash is detected, this mechanism will remove
   all virtio children devices, wait until their drivers let go, hard
   reset the remote processor and reload the firmware (resulting in the
   relevant virtio children devices re-added).  Essentially the entire
   software stack is reset, together with the relevant hardware, so
   users don't have to reset the entire phone.

 - STE Modem driver is added - by Sjur Brændeland

 - OMAP DSP boot address support is added - by Juan Gutierrez

 - A handful of fixes/cleanups - Sjur Brændeland, Dan Carpenter, Emil
   Goode

* tag 'remoteproc-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc: Fix use of format specifyer
  remoteproc: fix a potential NULL-dereference on cleanup
  remoteproc: select VIRTIO to avoid build breakage
  remoteproc: return -EFAULT on copy_from_user failure
  remoteproc: snprintf() can return more than was printed
  remoteproc: Add STE modem driver
  remtoteproc: maintain max notifyid
  remoteproc: create a 'recovery' debugfs entry
  remoteproc: add actual recovery implementation
  remoteproc: add rproc_report_crash function to notify rproc crashes
  remoteproc: Add dependency to HAS_DMA
  remoteproc/omap: set bootaddr support

Pull crypto update from Herbert Xu:
 - Optimised AES/SHA1 for ARM.
 - IPsec ESN support in talitos and caam.
 - x86_64/avx implementation of cast5/cast6.
 - Add/use multi-algorithm registration helpers where possible.
 - Added IBM Power7+ in-Nest support.
 - Misc fixes.

Fix up trivial conflicts in crypto/Kconfig due to the sparc64 crypto
config options being added next to the new ARM ones.

[ Side note: cut-and-paste duplicate help texts make those conflicts
  harder to read than necessary, thanks to git being smart about
  minimizing conflicts and maximizing the common parts... ]

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
  crypto: x86/glue_helper - fix storing of new IV in CBC encryption
  crypto: cast5/avx - fix storing of new IV in CBC encryption
  crypto: tcrypt - add missing tests for camellia and ghash
  crypto: testmgr - make test_aead also test 'dst != src' code paths
  crypto: testmgr - make test_skcipher also test 'dst != src' code paths
  crypto: testmgr - add test vectors for CTR mode IV increasement
  crypto: testmgr - add test vectors for partial ctr(cast5) and ctr(cast6)
  crypto: testmgr - allow non-multi page and multi page skcipher tests from same test template
  crypto: caam - increase TRNG clocks per sample
  crypto, tcrypt: remove local_bh_disable/enable() around local_irq_disable/enable()
  crypto: tegra-aes - fix error return code
  crypto: crypto4xx - fix error return code
  crypto: hifn_795x - fix error return code
  crypto: ux500 - fix error return code
  crypto: caam - fix error IDs for SEC v5.x RNG4
  hwrng: mxc-rnga - Access data via structure
  hwrng: mxc-rnga - Adapt clocks to new i.mx clock framework
  crypto: caam - add IPsec ESN support
  crypto: 842 - remove .cra_list initialization
  Revert "[CRYPTO] cast6: inline bloat--"
  ...

Glue_helper incorrectly XORs new IV over old IV at end of CBC encryption
function when it should store. This causes CBC encryption to give
incorrect output on multi-page encryption requests.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull drm merge (part 1) from Dave Airlie:
 "So first of all my tree and uapi stuff has a conflict mess, its my
  fault as the nouveau stuff didn't hit -next as were trying to rebase
  regressions out of it before we merged.

  Highlights:
   - SH mobile modesetting driver and associated helpers
   - some DRM core documentation
   - i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write
     combined pte writing, ilk rc6 support,
   - nouveau: major driver rework into a hw core driver, makes features
     like SLI a lot saner to implement,
   - psb: add eDP/DP support for Cedarview
   - radeon: 2 layer page tables, async VM pte updates, better PLL
     selection for > 2 screens, better ACPI interactions

  The rest is general grab bag of fixes.

  So why part 1? well I have the exynos pull req which came in a bit
  late but was waiting for me to do something they shouldn't have and it
  looks fairly safe, and David Howells has some more header cleanups
  he'd like me to pull, that seem like a good idea, but I'd like to get
  this merge out of the way so -next dosen't get blocked."

Tons of conflicts mostly due to silly include line changes, but mostly
mindless.  A few other small semantic conflicts too, noted from Dave's
pre-merged branch.

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits)
  drm/nv98/crypt: fix fuc build with latest envyas
  drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering
  drm/nv41/vm: fix and enable use of "real" pciegart
  drm/nv44/vm: fix and enable use of "real" pciegart
  drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie
  drm/nouveau: store supported dma mask in vmmgr
  drm/nvc0/ibus: initial implementation of subdev
  drm/nouveau/therm: add support for fan-control modes
  drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules
  drm/nouveau/therm: calculate the pwm divisor on nv50+
  drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster
  drm/nouveau/therm: move thermal-related functions to the therm subdev
  drm/nouveau/bios: parse the pwm divisor from the perf table
  drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices
  drm/nouveau/therm: rework thermal table parsing
  drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table
  drm/nouveau: fix pm initialization order
  drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it
  drm/nouveau: log channel debug/error messages from client object rather than drm client
  drm/nouveau: have drm debugging macros build on top of core macros
  ...

Pull user namespace compile fix from Eric W Biederman:
 "This tree contains a trivial build fix for one of the staging drivers
  when user namespace support is enabled"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  userns: Fix build of drivers/staging/dgrp

This is a first step in allowing people to by-pass udev for loading
device firmware.  Current versions of udev will deadlock (causing us to
block for the 30 second timeout) under some circumstances if the
firmware is loaded as part of the module initialization path, and this
is causing problems for media drivers in particular.

The current patch hardcodes the firmware path that udev uses by default,
and will fall back to the legacy udev mode if the firmware cannot be
found there.  We'd like to add support for both configuring the paths
and the fallback behaviour, but in the meantime this hopefully fixes the
immediate problem, while also giving us a way forward.

[ v2: Some VFS layer interface cleanups suggested by Al Viro ]
[ v3: use the default udev paths suggested by Kay Sievers ]
Suggested-by: Ivan Kalvachev <ikalvachev@gmail.com>
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Kay Sievers <kay@redhat.com>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull firewire updates from Stefan Richter:
  - feed GUIDs of FireWire nodes to the random pool
  - more complete quirk handling of a TI S400B phy
  - avoid holding a core lock while calling into highlevel drivers

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: addendum to address handler RCU conversion
  firewire: remove global lock around address handlers, convert to RCU
  firewire: ohci: get IR bit from TSB41BA3D phy
  firewire: core: feed /dev/random with devices' GUIDs

Pull preparatory patches for user API disintegration from David Howells:
 "The patches herein prepare for the extraction of the Userspace API
  bits from the various header files named in the Kbuild files.

  New subdirectories are created under either include/uapi/ or
  arch/x/include/uapi/ that correspond to the subdirectory containing
  that file under include/ or arch/x/include/.

  The new subdirs under the uapi/ directory are populated with Kbuild
  files that mostly do nothing at this time.  Further patches will
  disintegrate the headers in each original directory and fill in the
  Kbuild files as they do it.

  These patches also:

   (1) fix up #inclusions of "foo.h" rather than <foo.h>.

   (2) Remove some redundant #includes from the DRM code.

   (3) Make the kernel build infrastructure handle Kbuild files both in
       the old places and the new UAPI place that both specify headers
       to be exported.

   (4) Fix some kernel tools that #include kernel headers during their
       build.

  I have compile tested this with allyesconfig against x86_64,
  allmodconfig against i386 and a scattering of additional defconfigs of
  other arches.  Prepared for main script
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
  Acked-by: H. Peter Anvin <hpa@zytor.com>"

* tag 'uapi-prep-20121002' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: Plumb the UAPI Kbuilds into the user header installation and checking
  UAPI: x86: Differentiate the generated UAPI and internal headers
  UAPI: Remove the objhdr-y export list
  UAPI: Move linux/version.h
  UAPI: Set up uapi/asm/Kbuild.asm
  UAPI: x86: Fix insn_sanity build failure after UAPI split
  UAPI: x86: Fix the test_get_len tool
  UAPI: (Scripted) Set up UAPI Kbuild files
  UAPI: Partition the header include path sets and add uapi/ header directories
  UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers
  UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/
  UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/.
  UAPI: Refer to the DRM UAPI headers with <...> and from certain headers only

Explicitly test for GLOBAL_ROOT_UID and GLOBAL_ROOT_GID
instead of using 0, allowing dgrp to compile and work
properly when user namespace support is enabled.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull devicetree updates from Rob Herring:
 - Import of latest upstream device tree compiler (dtc)
 - New function of_get_child_by_name
 - Support for #size-cells of 0 and #addr-cells of >2
 - Couple of DT binding documentation updates

Fix up trivial conflicts due to of_get_child_by_name() having been added
next to the new of_get_next_available_child().

* tag 'dt-for-3.7' of git://sources.calxeda.com/kernel/linux:
  MAINTAINERS: add scripts/dtc under Devicetree maintainers
  dtc: import latest upstream dtc
  dt: Document general interrupt controller bindings
  dt/s3c64xx/spi: Use of_get_child_by_name to get a named child
  dt: introduce of_get_child_by_name to get child node by name
  of: i2c: add support for wakeup-source property
  of/address: Handle #address-cells > 2 specially
  DT: export of_irq_to_resource_table()
  devicetree: serial: Add documentation for imx serial
  devicetree: pwm: mxs-pwm.txt: Fix reg field annotation
  of: Allow busses with #size-cells=0

Pull JFS update from Dave Kleikamp:
 "JFS TRIM support and some minor fixes"

* tag 'jfs-3.7' of git://github.com/kleikamp/linux-shaggy:
  jfs: Fix do_div precision in commit b40c2e66
  JFS: use list_move instead of list_del/list_add
  jfs: Remove obsolete email address
  fs/jfs: TRIM support for JFS Filesystem

We're starting to need a channel through which we can funnel EFI
patches to make sure they get merged in a timely fashion. Matthew and
Peter seem happy enough for me to take that bullet.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull CRIS changes from Jesper Nilsson:
 "Removal of some unused code from the CRIS port"

* tag 'cris-for-linus-3.7' of git://jni.nu/cris:
  CRIS: Remove VCS simulator specific code
  cris/PCI: remove pcibios_assign_resources()

Pull sparc fixes from David Miller:
 "Some quick fixes after today's merge-window pull"

 1) Add missing dependency on Sparc DES driver, oops.  From Dave Jones.

 2) Tell GCC that prom_printf() is printf-like and fix the few
    resultiing warnings.  From Akinobu Mita.

 3) Niagara-2 memcpy doesn't provide it's return value correctly in some
    circumstances.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: fix format string argument for prom_printf()
  crypto: Build SPARC DES algorithms on SPARC only.
  sparc64: Fix return value of Niagara-2 memcpy.

The VCS simulator was a tool used in the development of the chip
and is no longer used or necessary.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

There's no caller of pcibios_assign_resources() in the tree.  It is
exported, so an out-of-tree module *could* call it, but no other arch
exports pcibios_assign_resources(), so it would have to be a CRIS-specific
module.  I doubt such a caller exists.

CC: Mikael Starvik <starvik@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Merge tag 'stable/for-linus-3.7-x86-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen update from Konrad Rzeszutek Wilk:
 "Features:
   - When hotplugging PCI devices in a PV guest we can allocate
     Xen-SWIOTLB later.
   - Cleanup Xen SWIOTLB.
   - Support pages out grants from HVM domains in the backends.
   - Support wild cards in xen-pciback.hide=(BDF) arguments.
   - Update grant status updates with upstream hypervisor.
   - Boot PV guests with more than 128GB.
   - Cleanup Xen MMU code/add comments.
   - Obtain XENVERS using a preferred method.
   - Lay out generic changes to support Xen ARM.
   - Allow privcmd ioctl for HVM (used to do only PV).
   - Do v2 of mmap_batch for privcmd ioctls.
   - If hypervisor saves the LED keyboard light - we will now instruct
     the kernel about its state.
  Fixes:
   - More fixes to Xen PCI backend for various calls/FLR/etc.
   - With more than 4GB in a 64-bit PV guest disable native SWIOTLB.
   - Fix up smatch warnings.
   - Fix up various return values in privmcmd and mm."

* tag 'stable/for-linus-3.7-x86-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (48 commits)
  xen/pciback: Restore the PCI config space after an FLR.
  xen-pciback: properly clean up after calling pcistub_device_find()
  xen/vga: add the xen EFI video mode support
  xen/x86: retrieve keyboard shift status flags from hypervisor.
  xen/gndev: Xen backend support for paged out grant targets V4.
  xen-pciback: support wild cards in slot specifications
  xen/swiotlb: Fix compile warnings when using plain integer instead of NULL pointer.
  xen/swiotlb: Remove functions not needed anymore.
  xen/pcifront: Use Xen-SWIOTLB when initting if required.
  xen/swiotlb: For early initialization, return zero on success.
  xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used.
  xen/swiotlb: Move the error strings to its own function.
  xen/swiotlb: Move the nr_tbl determination in its own function.
  xen/arm: compile and run xenbus
  xen: resynchronise grant table status codes with upstream
  xen/privcmd: return -EFAULT on error
  xen/privcmd: Fix mmap batch ioctl error status copy back.
  xen/privcmd: add PRIVCMD_MMAPBATCH_V2 ioctl
  xen/mm: return more precise error from xen_remap_domain_range()
  xen/mmu: If the revector fails, don't attempt to revector anything else.
  ...

Pull frontswap update from Konrad Rzeszutek Wilk:
 "Features:
   - Support exlusive get if backend is capable.
  Bug-fixes:
   - Fix compile warnings
   - Add comments/cleanup doc
   - Fix wrong if condition"

* tag 'stable/for-linus-3.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm:
  frontswap: support exclusive gets if tmem backend is capable
  mm: frontswap: fix a wrong if condition in frontswap_shrink
  mm/frontswap: fix uninit'ed variable warning
  mm/frontswap: cleanup doc and comment error
  mm: frontswap: remove unneeded headers

Pull security subsystem updates from James Morris:
 "Highlights:

   - Integrity: add local fs integrity verification to detect offline
     attacks
   - Integrity: add digital signature verification
   - Simple stacking of Yama with other LSMs (per LSS discussions)
   - IBM vTPM support on ppc64
   - Add new driver for Infineon I2C TIS TPM
   - Smack: add rule revocation for subject labels"

Fixed conflicts with the user namespace support in kernel/auditsc.c and
security/integrity/ima/ima_policy.c.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (39 commits)
  Documentation: Update git repository URL for Smack userland tools
  ima: change flags container data type
  Smack: setprocattr memory leak fix
  Smack: implement revoking all rules for a subject label
  Smack: remove task_wait() hook.
  ima: audit log hashes
  ima: generic IMA action flag handling
  ima: rename ima_must_appraise_or_measure
  audit: export audit_log_task_info
  tpm: fix tpm_acpi sparse warning on different address spaces
  samples/seccomp: fix 31 bit build on s390
  ima: digital signature verification support
  ima: add support for different security.ima data types
  ima: add ima_inode_setxattr/removexattr function and calls
  ima: add inode_post_setattr call
  ima: replace iint spinblock with rwlock/read_lock
  ima: allocating iint improvements
  ima: add appraise action keywords and default rules
  ima: integrity appraisal extension
  vfs: move ima_file_free before releasing the file
  ...

Pull UBI changes from Artem Bityutskiy:
 "The main change is the way we reserve eraseblocks for bad blocks
  handling.  We used to reserve 2% of the partition, but now we are more
  aggressive and we reserve 2% of the entire chip, which is what
  actually manufacturers specify in data sheets.  We introduced an
  option to users to override the default, though.

  There are a couple of fixes as well, and a number of cleanups."

* tag 'upstream-3.7-rc1' of git://git.infradead.org/linux-ubi: (24 commits)
  UBI: fix trivial typo 'it' => 'is'
  UBI: load after mtd device drivers
  UBI: print less
  UBI: use pr_ helper instead of printk
  UBI: comply with coding style
  UBI: erase free PEB with bitflip in EC header
  UBI: fix autoresize handling in R/O mode
  UBI: add max_beb_per1024 to attach ioctl
  UBI: allow specifying bad PEBs limit using module parameter
  UBI: check max_beb_per1024 value in ubi_attach_mtd_dev
  UBI: prepare for max_beb_per1024 module parameter addition
  UBI: introduce MTD_PARAM_MAX_COUNT
  UBI: separate bad_peb_limit in a function
  arm: sam9_l9260_defconfig: correct CONFIG_MTD_UBI_BEB_LIMIT
  UBI: use the whole MTD device size to get bad_peb_limit
  mtd: mtdparts: introduce mtd_get_device_size
  mtd: mark mtd_is_partition argument as constant
  arm: sam9_l9260_defconfig: remove non-existing config option
  UBI: kill CONFIG_MTD_UBI_BEB_RESERVE
  UBI: limit amount of reserved eraseblocks for bad PEB handling
  ...

Pull ubifs changes from Artem Bityutskiy:
 "No big changes for 3.7 in UBIFS:
   - Error reporting and debug printing improvements
   - Power cut emulation fixes
   - Minor cleanups"

Fix trivial conflict in fs/ubifs/debug.c due to the user namespace
changes.

* tag 'upstream-3.7-rc1' of git://git.infradead.org/linux-ubifs:
  UBIFS: print less
  UBIFS: use pr_ helper instead of printk
  UBIFS: comply with coding style
  UBIFS: use __aligned() attribute
  UBIFS: remove __DATE__ and __TIME__
  UBIFS: fix power cut emulation for mtdram
  UBIFS: improve scanning debug output
  UBIFS: always print full error reports
  UBIFS: print PID in debug messages

Pull xfs update from Ben Myers:
 "Several enhancements and cleanups:

   - make inode32 and inode64 remountable options
   - SEEK_HOLE/SEEK_DATA enhancements
   - cleanup struct declarations in xfs_mount.h"

* tag 'for-linus-v3.7-rc1' of git://oss.sgi.com/xfs/xfs:
  xfs: Make inode32 a remountable option
  xfs: add inode64->inode32 transition into xfs_set_inode32()
  xfs: Fix mp->m_maxagi update during inode64 remount
  xfs: reduce code duplication handling inode32/64 options
  xfs: make inode64 as the default allocation mode
  xfs: Fix m_agirotor reset during AG selection
  Make inode64 a remountable option
  xfs: stop the sync worker before xfs_unmountfs
  xfs: xfs_seek_hole() refinement with hole searching from page cache for unwritten extents
  xfs: xfs_seek_data() refinement with unwritten extents check up from page cache
  xfs: Introduce a helper routine to probe data or hole offset from page cache
  xfs: Remove type argument from xfs_seek_data()/xfs_seek_hole()
  xfs: fix race while discarding buffers [V4]
  xfs: check for possible overflow in xfs_ioc_trim
  xfs: unlock the AGI buffer when looping in xfs_dialloc
  xfs: kill struct declarations in xfs_mount.h
  xfs: fix uninitialised variable in xfs_rtbuf_get()

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next

This is a major rework of the nouveau driver core, to reflect more closely
how the hw is used and to make it easier to implement newer features now
that the GPUs are more clearly understood than when nouveau started.

It also contains a few other bits:
thermal patches
nv41/44 pcie gart fixes
i2c unregistering fixes.

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (191 commits)
  drm/nv98/crypt: fix fuc build with latest envyas
  drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering
  drm/nv41/vm: fix and enable use of "real" pciegart
  drm/nv44/vm: fix and enable use of "real" pciegart
  drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie
  drm/nouveau: store supported dma mask in vmmgr
  drm/nvc0/ibus: initial implementation of subdev
  drm/nouveau/therm: add support for fan-control modes
  drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules
  drm/nouveau/therm: calculate the pwm divisor on nv50+
  drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster
  drm/nouveau/therm: move thermal-related functions to the therm subdev
  drm/nouveau/bios: parse the pwm divisor from the perf table
  drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices
  drm/nouveau/therm: rework thermal table parsing
  drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table
  drm/nouveau: fix pm initialization order
  drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it
  drm/nouveau: log channel debug/error messages from client object rather than drm client
  drm/nouveau: have drm debugging macros build on top of core macros
  ...

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_dp.c

Pull vfs update from Al Viro:

 - big one - consolidation of descriptor-related logics; almost all of
   that is moved to fs/file.c

   (BTW, I'm seriously tempted to rename the result to fd.c.  As it is,
   we have a situation when file_table.c is about handling of struct
   file and file.c is about handling of descriptor tables; the reasons
   are historical - file_table.c used to be about a static array of
   struct file we used to have way back).

   A lot of stray ends got cleaned up and converted to saner primitives,
   disgusting mess in android/binder.c is still disgusting, but at least
   doesn't poke so much in descriptor table guts anymore.  A bunch of
   relatively minor races got fixed in process, plus an ext4 struct file
   leak.

 - related thing - fget_light() partially unuglified; see fdget() in
   there (and yes, it generates the code as good as we used to have).

 - also related - bits of Cyrill's procfs stuff that got entangled into
   that work; _not_ all of it, just the initial move to fs/proc/fd.c and
   switch of fdinfo to seq_file.

 - Alex's fs/coredump.c spiltoff - the same story, had been easier to
   take that commit than mess with conflicts.  The rest is a separate
   pile, this was just a mechanical code movement.

 - a few misc patches all over the place.  Not all for this cycle,
   there'll be more (and quite a few currently sit in akpm's tree)."

Fix up trivial conflicts in the android binder driver, and some fairly
simple conflicts due to two different changes to the sock_alloc_file()
interface ("take descriptor handling from sock_alloc_file() to callers"
vs "net: Providing protocol type via system.sockprotoname xattr of
/proc/PID/fd entries" adding a dentry name to the socket)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits)
  MAX_LFS_FILESIZE should be a loff_t
  compat: fs: Generic compat_sys_sendfile implementation
  fs: push rcu_barrier() from deactivate_locked_super() to filesystems
  btrfs: reada_extent doesn't need kref for refcount
  coredump: move core dump functionality into its own file
  coredump: prevent double-free on an error path in core dumper
  usb/gadget: fix misannotations
  fcntl: fix misannotations
  ceph: don't abuse d_delete() on failure exits
  hypfs: ->d_parent is never NULL or negative
  vfs: delete surplus inode NULL check
  switch simple cases of fget_light to fdget
  new helpers: fdget()/fdput()
  switch o2hb_region_dev_write() to fget_light()
  proc_map_files_readdir(): don't bother with grabbing files
  make get_file() return its argument
  vhost_set_vring(): turn pollstart/pollstop into bool
  switch prctl_set_mm_exe_file() to fget_light()
  switch xfs_find_handle() to fget_light()
  switch xfs_swapext() to fget_light()
  ...

prom_printf() takes printf style arguments.  Specifing GCC's format
attribute reveals that there are several wrong usages of prom_printf().

This fixes those wrong format strings and arguments, and also leaves
format attributes in order to detect similar mistakes at compile time.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Details of the problem, and solution, are in comments in the commit
proper.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Hopefully fixed the tlb flush timeout issue.  Was able to observe this
condition occur occasionally, and it appears the binary driver doesn't
wait on the old condition either..

Should give 39-bit DMA addressing on the relevant chipsets.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Something seems to be missing in regards to flushing specific ranges of
the TLB.  For the moment, flushing the entire thing seems to make it
work alright.

Should give 39-bit DMA addressing on the relevant chipsets.

v2: allocate contig 16KiB for dummy pages, reported by mwk on irc
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We don't need to pull the page address out of the page tables on nv4x
chips that have a real GART.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

For now, only 2 control modes are available:
- NONE: The fan is never touched (default)
- MANUAL: The fan is set to the user-defined fan speed (pwm1)

This patch introduces a distinction between ptherm internal fan management
and external fan management. The latter is bound to respect the fan mode
while the first can still select the speed it wants unless the NONE mode
is selected. This is important for automatic fan management.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This was reported by tizbac on IRC.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

v2: Martin Peres <martin.peres@labri.fr>
- fixed unintentional use of floating point
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The previous driver waited for 250ms to accumulate data. This version times a
complete fan rotation and extrapolates to RPM.

The fan rotational speed should now be read in less than 250ms (worst case)
and usually in less 50ms.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

It looks scary because of the size, but I tried to keep the differences minimal.
Further patches will fix the actual "driver" code and add new features.

v2: change filenames, split to submodules

v3: add a missing include

v4: Ben Skeggs <bskeggs@redhat.com>
- fixed set_defaults() to allow min_duty < 30 (thermal table will
  override this if it's actually necessary)
- fixed set_defaults() to not provide pwm_freq so nv4x (which only has
  pwm_div) can actually work.  the boards using pwm_freq will have a
  thermal table entry to provide us the value.
- removed unused files
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

v2: perf_table now is more in line with the other functions
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This commit also adds a static list of all known devices and their possible
i2c addresses.

v2: use the common table parsing technique as suggested by darktama
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

As an accident, it should also fix temperature reading on nv4x.

v2: introduce nvbios_therm_entry as advised by darktama
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>