- 07 Mar, 2010 4 commits
-
-
Bjorn Helgaas authored
This adds separate I/O and memory specs, so we don't have to change the field width in a shared spec, which then lets us make all the specs const and static, since they never change. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Bjorn Helgaas authored
Add clues about what the SMALL and SPECIAL flags do. Signed-off-by:
-
Joe Perches authored
Reducing the size of struct printf_spec is a good thing because multiple instances are commonly passed on stack. It's possible for type to be u8 and field_width to be s8, but this is likely small enough for now. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Linus Torvalds authored
The caller of usbfs_conn_disc_event() in some cases (but not always) already holds usbfs_mutex, so trying to protect the event counter with that lock causes nasty deadlocks. The problem was introduced by commit 554f7696 ("USB: Remove BKL from poll()") when the BLK protection was turned into using the mutex instead. So fix this by using an atomic variable instead. And while we're at it, get rid of the atrocious naming of said variable and the waitqueue it is associated with. This also cleans up the unnecessary locking in the poll routine, since the whole point of how the pollwait table works is that you can just add yourself to the waiting list, and then check the condition you're waiting for afterwards - avoiding all races. It also gets rid of the unnecessary dynamic allocation of the device status that just contained a single word. We should use f_version for this, as Dmitry Torokhov points out. That simplifies everything further. Reported-and-tested-by:
Jeff Chua <jeff.chua.linux@gmail.com> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
- 06 Mar, 2010 36 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfsLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs: [LogFS] Change magic number [LogFS] Remove h_version field [LogFS] Check feature flags [LogFS] Only write journal if dirty [LogFS] Fix bdev erases [LogFS] Silence gcc [LogFS] Prevent 64bit divisions in hash_index [LogFS] Plug memory leak on error paths [LogFS] Add MAINTAINERS entry [LogFS] add new flash file system Fixed up trivial conflict in lib/Kconfig, and a semantic conflict in fs/logfs/inode.c introduced by write_inode() being changed to use writeback_control' by commit a9185b41 ("pass writeback_control to ->write_inode")
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm raid1: fix deadlock when suspending failed device dm: eliminate some holes data structures dm ioctl: introduce flag indicating uevent was generated dm: free dm_io before bio_endio not after dm table: remove unused dm_get_device range parameters dm ioctl: only issue uevent on resume if state changed dm raid1: always return error if all legs fail dm mpath: refactor pg_init dm mpath: wait for pg_init completion when suspending dm mpath: hold io until all pg_inits completed dm mpath: avoid storing private suspended state dm: document when snapshot has finished merging dm table: remove dm_get from dm_table_get_md dm mpath: skip activate_path for failed paths dm mpath: pass struct pgpath to pg init done
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits) hwmon: Remove the deprecated adt7473 driver hwmon: Fix off-by-one kind values hwmon: (tmp421) Fix temperature conversions hwmon: (tmp421) Restore missing inputs hwmon: Driver for Andigilog aSC7621 family monitoring chips hwmon: (adt7411) Improve locking hwmon: Add driver for ADT7411 voltage and temperature sensor hwmon: (w83793) Add watchdog functionality hwmon: (g760a) Make rpm_from_cnt static hwmon: (it87) Validate auto pwm settings hwmon: (it87) Add support for old automatic fan speed control hwmon: (it87) Drop dead web links in documentation hwmon: (it87) Add an entry in MAINTAINERS hwmon: (it87) Use strict_strtol instead of simple_strtol hwmon: (it87) Fix many checkpatch errors and warnings hwmon: (it87) Add support for beep on alarm hwmon: (it87) Create vid attributes by group hwmon: (it87) Refactor attributes creation and removal hwmon: (it87) Expose the PWM/temperature mappings hwmon: (it87) Display fan outputs in automatic mode as such ...
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (21 commits) xfs: return inode fork offset in bulkstat for fsr xfs: Increase the default size of the reserved blocks pool xfs: truncate delalloc extents when IO fails in writeback xfs: check for more work before sleeping in xfssyncd xfs: Fix a build warning in xfs_aops.c xfs: fix locking for inode cache radix tree tag updates xfs: remove xfs_ipin/xfs_iunpin xfs: cleanup xfs_iunpin_wait/xfs_iunpin_nowait xfs: kill xfs_lrw.h xfs: factor common xfs_trans_bjoin code xfs: stop passing opaque handles to xfs_log.c routines xfs: split xfs_bmap_btalloc xfs: fix xfs_fsblock_t tracing xfs: fix inode pincount check in fsync xfs: Non-blocking inode locking in IO completion xfs: implement optimized fdatasync xfs: remove wrapper for the fsync file operation xfs: remove wrappers for read/write file operations xfs: merge xfs_lrw.c into xfs_file.c xfs: fix dquota trace format ...
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: (22 commits) nfsd4: fix minor memory leak svcrpc: treat uid's as unsigned nfsd: ensure sockets are closed on error Revert "sunrpc: move the close processing after do recvfrom method" Revert "sunrpc: fix peername failed on closed listener" sunrpc: remove unnecessary svc_xprt_put NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN xfs_export_operations.commit_metadata commit_metadata export operation replacing nfsd_sync_dir lockd: don't clear sm_monitored on nsm_reboot_lookup lockd: release reference to nsm_handle in nlm_host_rebooted nfsd: Use vfs_fsync_range() in nfsd_commit NFSD: Create PF_INET6 listener in write_ports SUNRPC: NFS kernel APIs shouldn't return ENOENT for "transport not found" SUNRPC: Bury "#ifdef IPV6" in svc_create_xprt() NFSD: Support AF_INET6 in svc_addsock() function SUNRPC: Use rpc_pton() in ip_map_parse() nfsd: 4.1 has an rfc number nfsd41: Create the recovery entry for the NFSv4.1 client nfsd: use vfs_fsync for non-directories ...
-
git://git.infradead.org/ubi-2.6Linus Torvalds authored
* git://git.infradead.org/ubi-2.6: UBI: add write checking UBI: simplify debugging return codes UBI: fix attaching error path UBI: support attaching by MTD character device name UBI: mark few variables as __initdata
-
Denis Turischev authored
Signed-off-by:
Denis Turischev <denis@compulab.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ben Gardner authored
The cs5535-gpio driver's get() function was returning the output value. This means that the GPIO pins would never work as an input, even if configured as an input. The driver should return the READ_BACK value, which is the sensed line value. To make that work when the direction is 'output', INPUT_ENABLE needs to be set. In addition, the driver was not disabling OUTPUT_ENABLE when the direction is set to 'input'. That would cause the GPIO to continue to drive the pin if the direction was ever set to output. This issue was noticed when attempting to use the gpiolib driver to read an external input. I had previously been using the char/cs5535-gpio driver. Signed-off-by:
Ben Gardner <gardner.ben@gmail.com> Acked-by:
Andres Salomon <dilinger@collabora.co.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: <stable@kernel.org> [2.6.33.x] Signed-off-by:
-
Marc Zyngier authored
Most of the GPIO expanders controlled by the pca953x driver are able to report changes on the input pins through an *INT pin. This patch implements the irq_chip functionality (edge detection only). The driver has been tested on an Arcom Zeus. [akpm@linux-foundation.org: the compiler does inlining for us nowadays] Signed-off-by:
Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Nate Case <ncase@xes-inc.com> Signed-off-by:
-
Richard Röjfors authored
Introduce support for triggering interrupts on both rising and falling edge. This feature requires version 3 or newer of the IP, a version check is done when triggering on both edges is requested. Signed-off-by:
Richard Röjfors <richard.rojfors@pelagicore.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Eric Miao authored
gpio_request() without initial configuration of the GPIO is normally useless, introduce gpio_request_one() together with GPIOF_ flags for input/output direction and initial output level. gpio_{request,free}_array() for multiple GPIOs. Signed-off-by:Eric Miao <eric.y.miao@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Ben Nizette <bn@niasdigital.com> Signed-off-by:
-
Olof Johansson authored
linux/i2c/pca953x.h is a very bare include file. Fix check for multiple includes of linux/i2c/pca953x.h, and add dependent includes into the header file. Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Acked-by:
Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Wolfram Sang authored
Add the MAX7300-I2C variant of the MAX7301-SPI version. Both chips share the same core logic, so the generic part of the in-kernel SPI-driver is refactored into a generic part. The I2C and SPI specific funtions are then wrapped into seperate drivers picking up the generic part. Signed-off-by:
-
James Hogan authored
The else part of the if statement is indented but does not have braces around it. It clearly should since it uses clk_enable and clk_disable which are supposed to balance. Signed-off-by:
James Hogan <james@albanarts.com> Acked-by:
Linus Walleij <linus.walleij@stericsson.com> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Luotao Fu <l.fu@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
This is to protect from interrupt handlers using an unregistered rtc device. To assert that the reset irq is considered now before the rtc is registered the corresponding status is checked before. Signed-off-by:
-
Uwe Kleine-König authored
The driver for the mc13783 rtc needs to know if the TODA irq is pending. Instead of tracking in the rtc driver if the irq is enabled provide that information, too. Signed-off-by:
-
Uwe Kleine-König authored
mc13783_ackirq, mc13783_unmask and mc13783_mask are deprecated, use the drop in replacements with the nicer names. Signed-off-by:
-
Uwe Kleine-König authored
mc13783_ackirq is deprecated, use the drop in replacement mc13783_irq_ack. Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Cc: Luotao Fu <l.fu@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
In the source file group these functions together. The mc13783 header file provides fallback implementations for the old names to prevent build failures. When all users of the old names are fixed to use the new names these can go away. Signed-off-by:
-
Aaro Koskinen authored
The idr should be destroyed when the module is unloaded. Found with kmemleak. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: stable <stable@kernel.org> Signed-off-by:
-
Tobias Klauser authored
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Julia Lawall authored
Memset should be given the size of the structure, not the size of the pointer. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T *x; expression E; @@ memset(x, E, sizeof( + * x)) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Uwe Kleine-König authored
The function pcf2123_remove is used only wrapped by __devexit_p so define it using __devexit. Signed-off-by:
-
H Hartley Sweeten authored
Fix issue with rtc device not getting unregistered in probe error path. Use the devres managed resource functions in the probe routine to cleanup the error path. Use sysfs_{create/remove}_group to add/remove the sysfs files. Reduces the text size by 132 bytes, increases data by 12 bytes: text data bss dec hex filename - 937 124 0 1061 425 rtc-ep93xx.o + 805 136 0 941 3ad rtc-ep93xx.o Signed-off-by:H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by:
-
Alexander Beregalov authored
Free pdata before exit. Found by cppcheck. [yuasa@linux-mips.org: add missing iounmap()] Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Reviewed-by:
WANG Cong <xiyou.wangcong@gmail.com> Acked-by:
Daniel Mack <daniel@caiaq.de> Acked-by:
-
Randy Dunlap authored
Currently the xen support drivers are displayed in the main Device Drivers menu of the config tools instead of in their own sub-menu, so move them to their own sub-menu, like the rest of the driver world uses. This keeps the main Device Drivers menu from becoming messy. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by:
-
Thiago Farina authored
warning: symbol 'vgacon_text_mode_force' was not declared. Should it be static? Signed-off-by:
Thiago Farina <tfransosi@gmail.com> Acked-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Amerigo Wang authored
BuraphaLinux reported that we will trigger a mm warning when we CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=65536, this is because mm cann't allocate so many pages. We should limit the range of CONFIG_VGACON_SOFT_SCROLLBACK_SIZE, don't give a user any chance to trigger that. Reported-by:
BuraphaLinux Server <buraphalinuxserver@gmail.com> Tested-by:
WANG Cong <amwang@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Neil Horman authored
Modify uid check in do_coredump so as to not apply it in the case of pipes. This just got noticed in testing. The end of do_coredump validates the uid of the inode for the created file against the uid of the crashing process to ensure that no one can pre-create a core file with different ownership and grab the information contained in the core when they shouldn' tbe able to. This causes failures when using pipes for a core dumps if the crashing process is not root, which is the uid of the pipe when it is created. The fix is simple. Since the check for matching uid's isn't relevant for pipes (a process can't create a pipe that the uermodehelper code will open anyway), we can just just skip it in the event ispipe is non-zero Reverts a pipe-affecting change which was accidentally made in : commit c46f739d : Author: Ingo Molnar <mingo@elte.hu> : AuthorDate: Wed Nov 28 13:59:18 2007 +0100 : Commit: Linus Torvalds <torvalds@woody.linux-foundation.org> : CommitDate: Wed Nov 28 10:58:01 2007 -0800 : : vfs: coredumping fix Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Oleg Nesterov authored
User visible change. do_coredump() kills all threads which share the same ->mm but only the coredumping process gets the proper exit_code. Other tasks which share the same ->mm die "silently" and return status == 0 to parent. This is historical behaviour, not actually a bug. But I think Frank Heckenbach rightly dislikes the current behaviour. Simple test-case: #include <stdio.h> #include <unistd.h> #include <signal.h> #include <sys/wait.h> int main(void) { int stat; if (!fork()) { if (!vfork()) kill(getpid(), SIGQUIT); } wait(&stat); printf("stat=%x\n", stat); return 0; } Before this patch it prints "stat=0" despite the fact the child was killed by SIGQUIT. After this patch the output is "stat=3" which obviously makes more sense. Even with this patch, only the task which originates the coredumping gets "|= 0x80" if the core was actually dumped, but at least the coredumping signal is visible to do_wait/etc. Reported-by:Frank Heckenbach <f.heckenbach@fh-soft.de> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
-
Masami Hiramatsu authored
Pass mm->flags as a coredump parameter for consistency. --- 1787 if (mm->core_state || !get_dumpable(mm)) { <- (1) 1788 up_write(&mm->mmap_sem); 1789 put_cred(cred); 1790 goto fail; 1791 } 1792 [...] 1798 if (get_dumpable(mm) == 2) { /* Setuid core dump mode */ <-(2) 1799 flag = O_EXCL; /* Stop rewrite attacks */ 1800 cred->fsuid = 0; /* Dump root private */ 1801 } --- Since dumpable bits are not protected by lock, there is a chance to change these bits between (1) and (2). To solve this issue, this patch copies mm->flags to coredump_params.mm_flags at the beginning of do_coredump() and uses it instead of get_dumpable() while dumping core. This copy is also passed to binfmt->core_dump, since elf*_core_dump() uses dump_filter bits in mm->flags. [akpm@linux-foundation.org: fix merge] Signed-off-by:Masami Hiramatsu <mhiramat@redhat.com> Acked-by:
Roland McGrath <roland@redhat.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Daisuke HATAYAMA authored
The current ELF dumper implementation can produce broken corefiles if program headers exceed 65535. This number is determined by the number of vmas which the process have. In particular, some extreme programs may use more than 65535 vmas. (If you google max_map_count, you can find some users facing this problem.) This kind of program never be able to generate correct coredumps. This patch implements ``extended numbering'' that uses sh_info field of the first section header instead of e_phnum field in order to represent upto 4294967295 vmas. This is supported by AMD64-ABI(http://www.x86-64.org/documentation.html) and Solaris(http://docs.sun.com/app/docs/doc/817-1984/). Of course, we are preparing patches for gdb and binutils. Signed-off-by:
Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: David Howells <dhowells@redhat.com> Cc: Greg Ungerer <gerg@snapgear.com> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
Daisuke HATAYAMA authored
By the next patch, elf_core_dump() and elf_fdpic_core_dump() will support extended numbering and so will produce the corefiles with section header table in a special case. The problem is the process of writing a file header offset of the section header table into e_shoff field of the ELF header. ELF header is positioned at the beginning of the corefile, while section header at the end. So, we need to take which of the following ways: 1. Seek backward to retry writing operation for ELF header after writing process for a whole part 2. Make offset calculation process and writing process totally sequential The clause 1. is not always possible: one cannot assume that file system supports seek function. Consider the no_llseek case. Therefore, this patch adopts the clause 2. Signed-off-by: -
Daisuke HATAYAMA authored
elf_core_dump() and elf_fdpic_core_dump() use #ifdef and the corresponding macro for hiding _multiline_ logics in functions. This patch removes #ifdef and replaces ELF_CORE_EXTRA_* by corresponding functions. For architectures not implemeonting ELF_CORE_EXTRA_*, we use weak functions in order to reduce a range of modification. This cleanup is for my next patches, but I think this cleanup itself is worth doing regardless of my firnal purpose. Signed-off-by:
-
Daisuke HATAYAMA authored
My next patch will replace ELF_CORE_EXTRA_* macros by functions, putting them into other newly created *.c files. Then, each files will contain dump_write(), where each pair of binfmt_*.c and elfcore.c should be the same. So, this patch moves them into a header file with dump_seek(). Also, the patch deletes confusing DUMP_WRITE macros in each files. Signed-off-by:
-
