- 20 Nov, 2019 7 commits
-
-
Vikram Auradkar authored
For delays longer than 20ms [um]delay isn't recommended. pm80xx_chip_soft_rst starts off with a 500ms delay before it even gets around to checking for the results of the reset. As long as it's at least 500ms it doesn't matter what the scheduler is doing. The delay in the pm8001_exec_internal_task_abort does nothing, and theory is this is a delay to avoid a double-free. Link: https://lore.kernel.org/r/20191114100910.6153-5-deepak.ukey@microchip.comAcked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
Vikram Auradkar <auradkar@google.com> Signed-off-by:
Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by:
Viswas G <Viswas.G@microchip.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
John Sperbeck authored
In pm8001_task_exec(), if the PHY is down, then we return the current value of 'rc'. We need to make sure it's initialized. Link: https://lore.kernel.org/r/20191114100910.6153-4-deepak.ukey@microchip.comAcked-by:
John Sperbeck <jsperbeck@google.com> Signed-off-by:
-
peter chang authored
After the completing the mpi_phy_start_resp, make phy enable completion as NULL. Link: https://lore.kernel.org/r/20191114100910.6153-3-deepak.ukey@microchip.comAcked-by:
peter chang <dpf@google.com> Signed-off-by:
-
peter chang authored
Driver was missing complete() call in mpi_sata_completion which result in SATA abort error handling timing out. That causes the device to be left in the in_recovery state so subsequent commands sent to the device fail and the OS removes access to it. Link: https://lore.kernel.org/r/20191114100910.6153-2-deepak.ukey@microchip.comAcked-by:
-
Subhash Jadavani authored
During clock gating (ufshcd_gate_work()), we first put the link hibern8 by calling ufshcd_uic_hibern8_enter() and if ufshcd_uic_hibern8_enter() returns success (0) then we gate all the clocks. Now let’s zoom in to what ufshcd_uic_hibern8_enter() does internally: It calls __ufshcd_uic_hibern8_enter() and if failure is encountered, link recovery shall put the link back to the highest HS gear and returns success (0) to ufshcd_uic_hibern8_enter() which is the issue as link is still in active state due to recovery! Now ufshcd_uic_hibern8_enter() returns success to ufshcd_gate_work() and hence it goes ahead with gating the UFS clock while link is still in active state hence I believe controller would raise UIC error interrupts. But when we service the interrupt, clocks might have already been disabled! This change fixes for this by returning failure from __ufshcd_uic_hibern8_enter() if recovery succeeds as link is still not in hibern8, upon receiving the error ufshcd_hibern8_enter() would initiate retry to put the link state back into hibern8. Link: https://lore.kernel.org/r/1573798172-20534-8-git-send-email-cang@codeaurora.orgReviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
-
Asutosh Das authored
This change attempts to abort gating of clocks if a request to turn-on clocks is pending. This would in turn avoid turning OFF and back ON the clocks. Link: https://lore.kernel.org/r/1573798172-20534-7-git-send-email-cang@codeaurora.orgReviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
-
Venkat Gopalakrishnan authored
Return IRQ_HANDLED only if the irq is really handled, this will help in catching spurious interrupts that go unhandled. Link: https://lore.kernel.org/r/1573798172-20534-6-git-send-email-cang@codeaurora.orgReviewed-by:
Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by:
-
- 19 Nov, 2019 4 commits
-
-
Can Guo authored
ufshcd_print_host_regs() can be called by interrupt handler, but it may sleep due to ufshcd_dump_regs() allocates the dump buffer memory with flag GFP_KERNEL. Fix it by changing GFP_KERNEL to GFP_ATMOIC. Link: https://lore.kernel.org/r/1573798172-20534-5-git-send-email-cang@codeaurora.orgReviewed-by:
-
Can Guo authored
Fix up possible unclocked register access to auto hibern8 register in resume path and through sysfs entry. Meanwhile, enable auto hibern8 only after device is fully initialized in probe path. Link: https://lore.kernel.org/r/1573798172-20534-4-git-send-email-cang@codeaurora.orgReviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Can Guo authored
Add reset control for host controller so that host controller can be reset as required in its power up sequence. Link: https://lore.kernel.org/r/1573798172-20534-3-git-send-email-cang@codeaurora.orgReviewed-by:
-
Can Guo authored
In order to recover from hibern8 exit failure, perform a reset in link recovery path before issuing link start-up. Link: https://lore.kernel.org/r/1573798172-20534-2-git-send-email-cang@codeaurora.orgReviewed-by:
-
- 13 Nov, 2019 21 commits
-
-
Finn Thain authored
Remove SG_NONE and a related misleading comment. Update documentation. This patch does not affect behaviour as zero initialization is redundant. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Viresh Kumar <vireshk@kernel.org> Cc: Oliver Neukum <oneukum@suse.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: usb-storage@lists.one-eyed-alien.net Link: https://lore.kernel.org/r/b4779b7a6563f6bd8d259ee457871c1c463c420e.1572656814.git.fthain@telegraphics.com.auSigned-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Finn Thain authored
Since the scsi subsystem adopted the blk-mq API, a host with zero sg_tablesize crashes with a NULL pointer dereference. blk_queue_max_segments: set to minimum 1 scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:0: Beginning Domain Validation scsi target0:0:0: Domain Validation skipping write tests scsi target0:0:0: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:1: Beginning Domain Validation scsi target0:0:1: Domain Validation skipping write tests scsi target0:0:1: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5 scsi target0:0:2: Beginning Domain Validation scsi target0:0:2: Domain Validation skipping write tests scsi target0:0:2: Ending Domain Validation blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 sr 0:0:2:0: Power-on or device reset occurred sd 0:0:0:0: Power-on or device reset occurred sd 0:0:1:0: Power-on or device reset occurred sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<001cd874>] blk_mq_free_request+0x66/0xe2 SR: 2004 SP: (ptrval) a2: 00874520 d0: 00000000 d1: 00000000 d2: 009ba800 d3: 00000000 d4: 00000000 d5: 08000002 a0: 0087be68 a1: 009a81e0 Process kworker/u2:2 (pid: 15, task=(ptrval)) Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 0000007a 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 0087bd98: 00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4 0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c 00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68 00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000 009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74 00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000 Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14 [<0024d200>] __scsi_execute+0x124/0x174 [<0024d0dc>] __scsi_execute+0x0/0x174 [<00265d10>] sd_revalidate_disk+0xba/0x1f02 [<00265c56>] sd_revalidate_disk+0x0/0x1f02 [<0036ddf4>] strlen+0x0/0x22 [<00227ba0>] device_add+0x3da/0x604 [<0036ddf4>] strlen+0x0/0x22 [<00267e64>] sd_probe+0x30c/0x4b4 [<0002da44>] process_one_work+0x0/0x402 [<0022b978>] really_probe+0x226/0x354 [<0022bc34>] driver_probe_device+0xa4/0xf0 [<0002da44>] process_one_work+0x0/0x402 [<0022bcd0>] __driver_attach_async_helper+0x50/0x70 [<00035dae>] async_run_entry_fn+0x36/0x130 [<0002db88>] process_one_work+0x144/0x402 [<0002e1aa>] worker_thread+0x0/0x570 [<0002e29a>] worker_thread+0xf0/0x570 [<0002e1aa>] worker_thread+0x0/0x570 [<003768d8>] schedule+0x0/0xb8 [<0003f58c>] __init_waitqueue_head+0x0/0x12 [<00033e92>] kthread+0xc2/0xf6 [<000331e8>] kthread_parkme+0x0/0x4e [<003768d8>] schedule+0x0/0xb8 [<00033dd0>] kthread+0x0/0xf6 [<00002c10>] ret_from_kernel_thread+0xc/0x14 Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c Disabling lock debugging due to kernel taint Avoid this by setting sg_tablesize = 1. Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.auReported-and-tested-by:Michael Schmitz <schmitzmic@gmail.com> Reviewed-by:
-
Johan Hovold authored
For some reason this driver depends on !64BIT, but it can still be useful to allow compile-testing on 64-bit machines. Link: https://lore.kernel.org/r/20191105085609.2338-3-johan@kernel.orgSigned-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
The MODULE_LICENSE macro is unconditionally defined in module.h, no need to ifdef its use. Link: https://lore.kernel.org/r/20191105085609.2338-2-johan@kernel.orgSigned-off-by:
-
YueHaibing authored
platform_get_irq() will call dev_err() itself on failure, so there is no need for the driver to also do this. This is detected by coccinelle. Link: https://lore.kernel.org/r/20191101140058.23212-1-yuehaibing@huawei.comSigned-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Kars de Jong authored
When using this driver on a Blizzard 1260, there were failures whenever DMA transfers from the SCSI bus to memory of 65535 bytes were followed by a DMA transfer of 1 byte. This caused the byte at offset 65535 to be overwritten with 0xff. The Blizzard hardware can't handle single byte DMA transfers. Besides this issue, limiting the DMA length to something that is not a multiple of the page size is very inefficient on most file systems. It seems this limit was chosen because the DMA transfer counter of the ESP by default is 16 bits wide, thus limiting the length to 65535 bytes. However, the value 0 means 65536 bytes, which is handled by the ESP and the Blizzard just fine. It is also the default maximum used by esp_scsi when drivers don't provide their own dma_length_limit() function. The limit of 65536 bytes can be used by all boards except the Fastlane. The old driver used a limit of 65532 bytes (0xfffc), which is reintroduced in this patch. Fixes: b7ded0e8 ("scsi: zorro_esp: Limit DMA transfers to 65535 bytes") Link: https://lore.kernel.org/r/20191112175523.23145-1-jongk@linux-m68k.orgSigned-off-by:
Kars de Jong <jongk@linux-m68k.org> Reviewed-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/csiostor/csio_lnode.c: In function 'csio_ln_init': drivers/scsi/csiostor/csio_lnode.c:1995:21: warning: variable 'rln' set but not used [-Wunused-but-set-variable] It is never used since introduction, so remove it. Link: https://lore.kernel.org/r/20191029061530.98197-1-yuehaibing@huawei.comSigned-off-by:
-
Bean Huo authored
In function __ufshcd_query_descriptor(), in the event of an error happening, we directly goto out_unlock and forget to invaliate hba->dev_cmd.query.descriptor pointer. This results in this pointer still valid in ufshcd_copy_query_response() for other query requests which go through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and system hangs. Log as shown below: Unable to handle kernel paging request at virtual address ffff000012233c40 Mem abort info: ESR = 0x96000047 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c [ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003, pmd=00000000ba8b8003, pte=0000000000000000 Internal error: Oops: 96000047 [#2] PREEMPT SMP ... Call trace: __memcpy+0x74/0x180 ufshcd_issue_devman_upiu_cmd+0x250/0x3c0 ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8 ufs_bsg_request+0x178/0x3b0 bsg_queue_rq+0xc0/0x118 blk_mq_dispatch_rq_list+0xb0/0x538 blk_mq_sched_dispatch_requests+0x18c/0x1d8 __blk_mq_run_hw_queue+0xb4/0x118 blk_mq_run_work_fn+0x28/0x38 process_one_work+0x1ec/0x470 worker_thread+0x48/0x458 kthread+0x130/0x138 ret_from_fork+0x10/0x1c Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7) ---[ end trace 793e1eb5dff69f2d ]--- note: kworker/0:2H[2054] exited with preempt_count 1 This patch is to move "descriptor = NULL" down to below the label "out_unlock". Fixes: d44a5f98(ufs: query descriptor API) Link: https://lore.kernel.org/r/20191112223436.27449-3-huobean@gmail.comReviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bean Huo authored
Print out returned response size and buffer size, while the front one is bigger than the back one. Link: https://lore.kernel.org/r/20191112223436.27449-2-huobean@gmail.comReviewed-by:
-
John Garry authored
The !! operator on a bool is pointless, so remove an example in hisi_sas_rescan_topology(). Link: https://lore.kernel.org/r/1573551059-107873-5-git-send-email-john.garry@huawei.comSigned-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Xiang Chen authored
Currently we call function hisi_sas_debugfs_exit() to remove debugfs_dir before freeing interrupt irqs and destroying workqueue in the driver remove path. If a dump is triggered before function hisi_sas_debugfs_exit() but debugfs_work may be called after it, so it may refer to already removed debugfs_dir which will cause NULL pointer dereference. To avoid it, put function hisi_sas_debugfs_exit() after free_irqs and destroy workqueue when removing hisi_sas driver. Link: https://lore.kernel.org/r/1573551059-107873-4-git-send-email-john.garry@huawei.comSigned-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
Xiang Chen authored
Need to return directly if init hardware failed. Fixes: 73a4925d ("scsi: hisi_sas: Update all the registers after suspend and resume") Link: https://lore.kernel.org/r/1573551059-107873-3-git-send-email-john.garry@huawei.comSigned-off-by:
-
Xiang Chen authored
Need to check the structure sas_port before using it. Link: https://lore.kernel.org/r/1573551059-107873-2-git-send-email-john.garry@huawei.comSigned-off-by:
-
James Smart authored
Update lpfc version to 12.6.0.2 Link: https://lore.kernel.org/r/20191111230401.12958-7-jsmart2021@gmail.comReviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Driver is setting the initiator nvme template with a max hw queues value of the present cpu count which is odd. It should be registering the number of hdwq queues (queues created on the adapter). Change to set nvme tempate, in all cases, to the number of hardware queues. Link: https://lore.kernel.org/r/20191111230401.12958-6-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
Currently, cpu_map[cpu#]->hdwq is left to equal LPFC_VECTOR_MAP_EMPTY for not present CPUs. If a CPU is dynamically hot-added, it is possible we may crash due to not assigning an allocated hdwq. Correct by assigning a hdwq at initialization for all not-present CPUs. Fixes: dcaa2136 ("scsi: lpfc: Change default IRQ model on AMD architectures") Link: https://lore.kernel.org/r/20191111230401.12958-5-jsmart2021@gmail.comReviewed-by:
-
James Smart authored
Compilation can fail due to having an inline function reference where the function body is not present. Fix by removing the inline tag. Fixes: 93a4d6f4 ("scsi: lpfc: Add registration for CPU Offline/Online events") Link: https://lore.kernel.org/r/20191111230401.12958-4-jsmart2021@gmail.comReviewed-by:
-
James Smart authored
Coverity reported the following: *** CID 101747: Null pointer dereferences (FORWARD_NULL) /drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp() 4433 kfree(mp); 4434 } 4435 mempool_free(mbox, phba->mbox_mem_pool); 4436 } 4437 out: 4438 if (ndlp && NLP_CHK_NODE_ACT(ndlp)) { vvv CID 101747: Null pointer dereferences (FORWARD_NULL) vvv Dereferencing null pointer "shost". 4439 spin_lock_irq(shost->host_lock); 4440 ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI); 4441 spin_unlock_irq(shost->host_lock); 4442 4443 /* If the node is not being used by another discovery thread, 4444 * and we are sending a reject, we are done with it. Fix by adding a check for non-null shost in line 4438. The scenario when shost is set to null is when ndlp is null. As such, the ndlp check present was sufficient. But better safe than sorry so add the shost check. Reported-by:coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 101747 ("Null pointer dereferences") Fixes: 2e0fef85 ("[SCSI] lpfc: NPIV: split ports") CC: James Bottomley <James.Bottomley@SteelEye.com> CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com> CC: linux-next@vger.kernel.org Link: https://lore.kernel.org/r/20191111230401.12958-3-jsmart2021@gmail.comReviewed-by:
-
James Smart authored
Coverity reported the following: *** CID 1487391: Null pointer dereferences (FORWARD_NULL) /drivers/scsi/lpfc/lpfc_scsi.c: 614 in lpfc_get_scsi_buf_s3() 608 spin_unlock(&phba->scsi_buf_list_put_lock); 609 } 610 spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, iflag); 611 612 if (lpfc_ndlp_check_qdepth(phba, ndlp)) { 613 atomic_inc(&ndlp->cmd_pending); vvv CID 1487391: Null pointer dereferences (FORWARD_NULL) vvv Dereferencing null pointer "lpfc_cmd". 614 lpfc_cmd->flags |= LPFC_SBUF_BUMP_QDEPTH; 615 } 616 return lpfc_cmd; 617 } 618 /** 619 * lpfc_get_scsi_buf_s4 - Get a scsi buffer from io_buf_list of the HBA Fix by checking lpfc_cmd to be non-NULL as part of line 612 Reported-by: -
Vignesh Raghavendra authored
TI's J721e SoC has a Cadence UFS IP with a TI specific wrapper. This is a minimal driver to configure the wrapper. It releases the UFS slave device out of reset and sets up registers to indicate PHY reference clock input frequency before probing child Cadence UFS driver. Link: https://lore.kernel.org/r/20191108164857.11466-3-vigneshr@ti.comReviewed-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Vignesh Raghavendra authored
Add binding documentation of TI wrapper for Cadence UFS Controller. Link: https://lore.kernel.org/r/20191108164857.11466-2-vigneshr@ti.comReviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 09 Nov, 2019 8 commits
-
-
Damien Le Moal authored
Prevent recursion into the IO path under low memory conditions by using GFP_NOIO in place of GFP_KERNEL when allocating a new command with tcmu_alloc_cmd() and user ring space with tcmu_get_empty_block(). Link: https://lore.kernel.org/r/20191108082901.417950-1-damien.lemoal@wdc.comReported-by:
Masato Suzuki <masato.suzuki@wdc.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Acked-by:
Mike Christie <mchristi@redhat.com> Reviewed-by:
-
Damien Le Moal authored
struct scsi_cmnd cmd->req.resid_len which is returned and set respectively by the helper functions scsi_get_resid() and scsi_set_resid() is an unsigned int. Reflect this fact in the interface of these helper functions. Also fix compilation errors due to min() and max() type mismatch introduced by this change in scsi debug code, usb transport code and in the USB ENE card reader driver. Link: https://lore.kernel.org/r/20191030090847.25650-1-damien.lemoal@wdc.comSigned-off-by:
-
Bart Van Assche authored
Fix the following kernel warning: cpumask_of_node(-1): (unsigned)node >= nr_node_ids(1) Fixes: dcaa2136 ("scsi: lpfc: Change default IRQ model on AMD architectures") Link: https://lore.kernel.org/r/20191108225947.1395-1-jsmart2021@gmail.comSigned-off-by:
-
Bart Van Assche authored
Fix the following lockdep warning: ============================================ WARNING: possible recursive locking detected 5.4.0-rc6-dbg+ #2 Not tainted -------------------------------------------- systemd-udevd/130 is trying to acquire lock: ffffffff826b05d0 (cpu_hotplug_lock.rw_sem){++++}, at: irq_calc_affinity_vectors+0x63/0x90 but task is already holding lock: ffffffff826b05d0 (cpu_hotplug_lock.rw_sem){++++}, at: lpfc_sli4_enable_intr+0x422/0xd50 [lpfc] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(cpu_hotplug_lock.rw_sem); lock(cpu_hotplug_lock.rw_sem); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by systemd-udevd/130: #0: ffff8880d53fe210 (&dev->mutex){....}, at: __device_driver_lock+0x4a/0x70 #1: ffffffff826b05d0 (cpu_hotplug_lock.rw_sem){++++}, at: lpfc_sli4_enable_intr+0x422/0xd50 [lpfc] stack backtrace: CPU: 1 PID: 130 Comm: systemd-udevd Not tainted 5.4.0-rc6-dbg+ #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0xa5/0xe6 __lock_acquire.cold+0xf7/0x23a lock_acquire+0x106/0x240 cpus_read_lock+0x41/0xe0 irq_calc_affinity_vectors+0x63/0x90 __pci_enable_msix_range+0x10a/0x950 pci_alloc_irq_vectors_affinity+0x144/0x210 lpfc_sli4_enable_intr+0x4b2/0xd50 [lpfc] lpfc_pci_probe_one+0x1411/0x22b0 [lpfc] local_pci_probe+0x7c/0xc0 pci_device_probe+0x25d/0x390 really_probe+0x170/0x510 driver_probe_device+0x127/0x190 device_driver_attach+0x98/0xa0 __driver_attach+0xb6/0x1a0 bus_for_each_dev+0x100/0x150 driver_attach+0x31/0x40 bus_add_driver+0x246/0x300 driver_register+0xe0/0x170 __pci_register_driver+0xde/0xf0 lpfc_init+0x134/0x1000 [lpfc] do_one_initcall+0xda/0x47e do_init_module+0x10a/0x3b0 load_module+0x4318/0x47c0 __do_sys_finit_module+0x134/0x1d0 __x64_sys_finit_module+0x47/0x50 do_syscall_64+0x6f/0x2e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: dcaa2136 ("scsi: lpfc: Change default IRQ model on AMD architectures") Link: https://lore.kernel.org/r/20191107052158.25788-4-bvanassche@acm.orgSigned-off-by: -
Bart Van Assche authored
Fix the following kernel bug report: BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/954 Fixes: d79c9e9d ("scsi: lpfc: Support dynamic unbounded SGL lists on G7 hardware.") Link: https://lore.kernel.org/r/20191107052158.25788-2-bvanassche@acm.orgSigned-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Martin Wilck authored
Avoid an uninitialized value (0) for ha->fc4_type_priority being falsely interpreted as NVMe priority. Not strictly needed any more after the previous patch, but makes the fc4_type_priority handling more explicit. Link: https://lore.kernel.org/r/20191107224839.32417-3-martin.wilck@suse.comTested-by:
David Bond <dbond@suse.com> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Reviewed-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
Martin Wilck authored
ha->fc4_type_priority is currently initialized only in qla81xx_nvram_config(). That makes it default to NVMe for other adapters. Fix it. Fixes: 84ed362a ("scsi: qla2xxx: Dual FCP-NVMe target port support") Link: https://lore.kernel.org/r/20191107224839.32417-2-martin.wilck@suse.comTested-by:
-
Bart Van Assche authored
This patch fixes the following kernel warning: DMA-API: qla2xxx 0000:00:0a.0: device driver frees DMA memory with different size [device address=0x00000000c7b60000] [map size=4088 bytes] [unmap size=512 bytes] WARNING: CPU: 3 PID: 1122 at kernel/dma/debug.c:1021 check_unmap+0x4d0/0xbd0 CPU: 3 PID: 1122 Comm: rmmod Tainted: G O 5.4.0-rc1-dbg+ #1 RIP: 0010:check_unmap+0x4d0/0xbd0 Call Trace: debug_dma_free_coherent+0x123/0x173 dma_free_attrs+0x76/0xe0 qla2x00_mem_free+0x329/0xc40 [qla2xxx_scst] qla2x00_free_device+0x170/0x1c0 [qla2xxx_scst] qla2x00_remove_one+0x4f0/0x6d0 [qla2xxx_scst] pci_device_remove+0xd5/0x1f0 device_release_driver_internal+0x159/0x280 driver_detach+0x8b/0xf2 bus_remove_driver+0x9a/0x15a driver_unregister+0x51/0x70 pci_unregister_driver+0x2d/0x130 qla2x00_module_exit+0x1c/0xbc [qla2xxx_scst] __x64_sys_delete_module+0x22a/0x300 do_syscall_64+0x6f/0x2e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 3f006ac3 ("scsi: qla2xxx: Secure flash update support for ISP28XX") # v5.2-rc1~130^2~270. Cc: Michael Hernandez <mhernandez@marvell.com> Cc: Himanshu Madhani <hmadhani@marvell.com> Link: https://lore.kernel.org/r/20191106044226.5207-3-bvanassche@acm.orgReviewed-by:
-
