This patch fixes the problem of mapping contigous and non contigous dma buffers.

Currently page struct is calculated from the buf->dma_addr which is not the
physical address. It is replaced by buf->pages which points to the page struct
of the first page of contigous memory chunk. This gives the correct page frame
number for mapping.

Non-contigous dma buffers are described using SG table and SG lists. Each
valid SG List is pointing to a single page or group of pages which are
physically contigous. Current implementation just maps the first page of each
SG List and leave the other pages unmapped, leading to a crash. Given solution
finds the page struct for the faulting page through parsing SG table and map it.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

With iommu support, non-continuous buffer also is supported so
this patch removes these checking from exynos_drm_gem_get/put_dma_addr
funciton.

This patch is based on the below patch set, "drm/exynos: add
iommu support for -next".
	http://www.spinics.net/lists/dri-devel/msg29041.htmlSigned-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Chagelog v2:
removed unnecessary structure, struct g2d_gem_node.

Chagelog v1:
This patch adds iommu support for g2d driver. For this, it
adds subdrv_probe/remove callback to enable or disable
g2d iommu. And with this patch, in case of using g2d iommu,
we can get or put device address to a gem handle from user
through exynos_drm_gem_get/put_dma_addr(). Actually, these
functions take a reference to a gem handle so that the gem
object used by g2d dma is released properly.

And runqueue_node has a pointer to drm_file object of current
process to manage gem handles to owner.

This patch is based on the below patch set, "drm/exynos: add
iommu support for -next".
     http://www.spinics.net/lists/dri-devel/msg29041.htmlSigned-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Changelog v2:
move iommu support feature to mixer side.
And below is Prathyush's comment.

According to the new IOMMU framework for exynos sysmmus,
the owner of the sysmmu-tv is mixer (which is the actual
device that does DMA) and not hdmi.
The mmu-master in sysmmu-tv node is set as below in exynos5250.dtsi
	sysmmu-tv {
		-
		mmu-master = <&mixer>;
	};

Changelog v1:
The iommu will be enabled when hdmi sub driver is probed and
will be disabled when removed.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

The iommu will be enabled when fimd sub driver is probed and
will be disabled when removed.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Changelog v4:
- fix condition to drm_iommu_detach_device funtion.

Changelog v3:
- add dma_parms->max_segment_size setting of drm_device->dev.
- use devm_kzalloc instead of kzalloc.

Changelog v2:
- fix iommu attach condition.
  . check archdata.dma_ops of drm device instead of
    subdrv device's one.
- code clean to exynos_drm_iommu.c file.
  . remove '#ifdef CONFIG_ARM_DMA_USE_IOMMU' from exynos_drm_iommu.c
    and add it to driver/gpu/drm/exynos/Kconfig.

Changelog v1:
This patch adds iommu support for exynos drm framework with dma mapping
api. In this patch, we used dma mapping api to allocate physical memory
and maps it with iommu table and removed some existing codes and added
new some codes for iommu support.

GEM allocation requires one device object to use dma mapping api so
this patch uses one iommu mapping for all sub drivers. In other words,
all sub drivers have same iommu mapping.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

This patch adds support for DMA_ATTR_FORCE_CONTIGUOUS attribute for
dma_alloc_attrs() in IOMMU-aware implementation. For allocating physically
contiguous buffers Contiguous Memory Allocator is used.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

This patch adds DMA_ATTR_FORCE_CONTIGUOUS attribute to the DMA-mapping
subsystem.

By default DMA-mapping subsystem is allowed to assemble the buffer
allocated by dma_alloc_attrs() function from individual pages if it can
be mapped as contiguous chunk into device dma address space. By
specifing this attribute the allocated buffer is forced to be contiguous
also in physical memory.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Currently the only users of drm_vblank_off() are i915 and gma500,
neither of which holds the event_lock when calling this function.
Fix this by holding the event_lock while traversing the list.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Currently the exynos driver calls drm_vblank_off() with the event_lock
held, while drm_vblank_off() will lock vbl_time and vblank_time_lock.
This lock dependency chain conflicts with the one in drm_handle_vblank()
where we first lock vblank_time_lock and then the event_lock.

Fix this by removing the above drm_vblank_off() calls which are in fact
never executed: drm_dev->vblank_disable_allowed is only ever non-zero
during driver init, until it's set in {fimd,vidi}_subdrv_probe. Both the
driver init and open code is protected by drm_global_mutex, so the
earliest page flip ioctl can happen only after vblank_disable_allowed is
set to 1. Thus {fimd,vidi}_finish_pageflip - with pending flip events -
will always get called with vblank_disable_allowed being 1.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

It's guaranteed that for each event on pageflip_event_list we have
called drm_vblank_get() - see exynos_drm_crtc_page_flip() - so checking
for this is redundant.

Also we need to call drm_vblank_put() for each event on the list, not
only once, otherwise we'd leak vblank references if there are multiple
events on the list.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Check overlay_ops is not NULL as checked in the previous 'if' condition.
Fixes the following smatch error:
drivers/gpu/drm/exynos/exynos_drm_encoder.c:509 exynos_drm_encoder_plane_disable()
error: we previously assumed 'overlay_ops' could be null (see line 499)
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Fixes the following sparse warnings:
drivers/gpu/drm/exynos/exynos_drm_fimd.c:65:25: warning:
symbol 'exynos4_fimd_driver_data' was not declared. Should it be static?
drivers/gpu/drm/exynos/exynos_drm_fimd.c:69:25: warning:
symbol 'exynos5_fimd_driver_data' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Chagelog v2:
Move encoder's dpms updating into exynos_drm_encoder_commit
function because when crtc's dpms is updated, encoder's dpms
is updated also. This would induce the issue that encoder
isn't disabled after crtc is disabled.

Changelog v1:
This patch fixes a issue that overlay data aren't applied
to real hardware when dpms off goes to on after setcrtc
was requested like below,
    dpms off -> setcrtc -> dpms off -> dpms on

For this, it makes encoder's dpms to be updated when
setcrtc is requested.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

plane->fb will be set to new fb after update_plane callback is called
by drm_mode_set_plane()
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

With iommu, buffer->dma_addr has device addres so this patch
fixes for physical address to be set to fix.smem_start always.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Daniel writes:
Besides the big item of lifting the "preliminary hw support" tag from the
 Haswell code, just small bits&pieces all over:
 - Leftover Haswell patches and some fixes from Paulo
 - LyncPoint PCH support (for hsw)
 - OOM handling improvements from Chris Wilson
 - connector property and send_vblank_event refactorings from Rob Clark
 - random pile of small fixes

 Note that the send_vblank refactorings will cause some locking WARNs to
 show up. Imre has fixed that up, but since all the driver changes outside
 of the drm core have been for exonys, those four patches are merged
 through the exonys-next tree.

Meh, I've forgotten to cherry-pick an important fix from Ben for a
regression in the 3.8 gen6+ gtt code. New pull request below. While I'm at
it, the hdmi VIC patch for the drm edid code is still in my queue, I'll
send you that in the next 3.8-fixes pull.

* 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel: (33 commits)
  drm/i915: Fix pte updates in ggtt clear range
  drm/i915: promote Haswell to full support
  drm/i915: Report the origin of the LVDS fixed panel mode
  drm/i915: LVDS fallback to fixed-mode if EDID not present
  drm/i915/sdvo: kfree the intel_sdvo_connector, not drm_connector, on destroy
  drm/i915: drm_connector_property -> drm_object_property
  drm/i915: use drm_send_vblank_event() helper
  drm/i915: Use pci_resource functions for BARs.
  drm/i915: Borrow our struct_mutex for the direct reclaim
  drm/i915: Defer assignment of obj->gtt_space until after all possible mallocs
  drm/i915: Apply the IBX transcoder A w/a for HDMI to SDVO as well
  drm/i915: implement WaMbcDriverBootEnable on Haswell
  drm/i915: fix intel_ddi_get_cdclk_freq for ULT machines
  drm/i915: make the panel fitter work on pipes B and C on Haswell
  drm/i915: make the panel fitter work on pipes B and C on IVB
  drm/i915: don't intel_crt_init if DDI A has 4 lanes
  drm/i915: make DP work on LPT-LP machines
  drm/i915: fix false positive "Unclaimed write" messages
  drm/i915: use cpu/pch transcoder on intel_enable_pipe
  drm/i915: don't limit Haswell CRT encoder to pipe A
  ...

This bug was introduced by me:
commit e76e9aeb
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Sun Nov 4 09:21:27 2012 -0800

    drm/i915: Stop using AGP layer for GEN6+

The existing code uses memset_io which follows memset semantics in only
guaranteeing a write of individual bytes. Since a PTE entry is 4 bytes,
this can only be correct if the scratch page address is 0.

This caused unsightly errors when we clear the range at load time,
though I'm not really sure what the heck is referencing that memory
anyway. I caught this is because I believe we have some other bug where
the display is doing reads of memory we feel should be cleared (or we
are relying on scratch pages to be a specific value).
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Add myself as the maintainer of the NVIDIA Tegra DRM driver.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fixed build warning as below:

drivers/gpu/drm/drm_pci.c: In function 'drm_pcie_get_speed_cap_mask':
drivers/gpu/drm/drm_pci.c:496:9: warning: 'lnkcap' may be used uninitialized in this function [-Wuninitialized]
drivers/gpu/drm/drm_pci.c:497:10: warning: 'lnkcap2' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

core/device.h was included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

nouveau_ttm.h was included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Fixes a PCE0 page fault noticed on NVD9 during module unload.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

On 3.7-rc6, add missing newline to to prevent the following kernel log
line getting appended to the current one after switching the integrated
GPU and suspending the discrete GPU.
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

These objects leak VRAM - but only on module unload.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Fixes GART leak (as accounted by nouveau_drm.gem.gart_available).
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Copy/pasted from nouveau_gem_new.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

It fixes a bug that would have been introduced when adding more
sudevs/engines.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

NVIDIA also appear to use the same class on Fermi/Kepler for PPP.

Will allow use of the engine if firmware (nvXX_fuc086) provided.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Will allow use of the engine if firmware (nvXX_fuc086) provided.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Will allow use of the engine if firmware (nvXX_fuc085) provided.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Will allow use of the engine if firmware (nvXX_fuc084) provided.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Later chipsets use falcon anyway, and I can't currently see a good need
for a shared base class.

PPP will get the same treatment once Maarten's patches are merged.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

No support for the class yet, but will be pulled in with Maarten's Fermi
vdec patches.  The Kepler PPP class is identical.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Will allow use of the engine if firmware (nvXX_fuc085) provided.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Will allow use of the engine if firmware (nvXX_fuc084) provided.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Previously, if either vram/gart handles were specified as ~0, the ioctl
call would fail.  In order to hack engine selection into the ioctl for
kepler, we now define (fb_ctxdma_handle == ~0) to mean "engine mask is
in tt_ctxdma_handle".

This approach also allows new userspace to detect lack of support for
non-PGRAPH channels on older kernels.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>