- 16 Jun, 2017 6 commits
-
-
git://github.com/BayLibre/clk-mesonStephen Boyd authored
Pull Amlogic clk driver updates from Jerome Brunet: * Expose more clock gate on meson8 (SAR ADC, RNG, USB, SDIO, ETH) * Add new compatible to the meson8 clock controller for meson8b * Add missing parents to gxbb clk81 * tag 'meson-clk-for-4.13-2' of git://github.com/BayLibre/clk-meson: clk: meson: gxbb: add all clk81 parents clk: meson: meson8b: add compatibles for Meson8 and Meson8m2 clk: meson8b: export the ethernet gate clock clk: meson8b: export the USB clocks clk: meson8b: export the gate clock for the HW random number generator clk: meson8b: export the SDIO clock clk: meson8b: export the SAR ADC clocks
-
https://github.com/t-kristo/linux-pmStephen Boyd authored
* 'for-4.13-ti-clkctrl' of https://github.com/t-kristo/linux-pm: clk: ti: omap4: add clkctrl clock data dt-bindings: clk: add omap4 clkctrl definitions clk: ti: add support for clkctrl clocks Documentation: dt-bindings: Add binding documentation for TI clkctrl clocks
-
Stephen Boyd authored
It isn't used outside of this file right now. Signed-off-by:Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Merge tag 'sunxi-clk-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next Pull Allwinner clock patches from Maxime Ripard: Some new clock units are supported, for the display clocks unsed in the newer SoCs, and the A83T PRCM. There is also a bunch of minor fixes for clocks that are not used by anyone, and reworks needed by drivers that will land in 4.13. * tag 'sunxi-clk-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) clk: sunxi-ng: Move all clock types to a library clk: sunxi-ng: a83t: Add support for A83T's PRCM dt-bindings: clock: sunxi-ccu: Add compatible string for A83T PRCM clk: sunxi-ng: select SUNXI_CCU_MULT for sun8i-a83t clk: sunxi-ng: a83t: Fix audio PLL divider offset clk: sunxi-ng: a83t: Fix PLL lock status register offset clk: sunxi-ng: Add driver for A83T CCU clk: sunxi-ng: Support multiple variable pre-dividers dt-bindings: clock: sunxi-ccu: Add compatible string for A83T CCU clk: sunxi-ng: de2: fix wrong pointer passed to PTR_ERR() clk: sunxi-ng: sun5i: Export video PLLs clk: sunxi-ng: mux: Re-adjust parent rate clk: sunxi-ng: mux: Change pre-divider application function prototype clk: sunxi-ng: mux: split out the pre-divider computation code clk: sunxi-ng: mux: Don't just rely on the parent for CLK_SET_RATE_PARENT clk: sunxi-ng: div: Switch to divider_round_rate clk: sunxi-ng: Pass the parent and a pointer to the clocks round rate clk: divider: Make divider_round_rate take the parent clock clk: sunxi-ng: explicitly include linux/spinlock.h clk: sunxi-ng: add support for DE2 CCU ...
-
Jerome Brunet authored
Remove the FIXME on clk81 mux and add all the documented parents Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com>
-
Jerome Brunet authored
-
- 15 Jun, 2017 4 commits
-
-
Tero Kristo authored
Add data for omap4 clkctrl clocks, and register it within the clkctrl driver. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com>
-
Tero Kristo authored
Contains offsets for all omap4 clkctrl main and optional clocks. Signed-off-by:
-
Tero Kristo authored
Previously, hwmod core has been used for controlling the hwmod level clocks directly. This has certain drawbacks, like being unable to share the clocks for multiple users, missing usecounting and generally being totally incompatible with the common clock framework. This patch adds support for clkctrl clocks for addressing the above issues. These support the modulemode handling, which will replace the direct hwmod clkctrl linkage. Any optional clocks are also supported, gate, mux and divider. Signed-off-by:
-
Tony Lindgren authored
Texas Instruments omap variant SoCs starting with omap4 have a clkctrl clock controller instance for each interconnect target module. The clkctrl controls functional and interface clocks for the module. The clkctrl clocks are currently handled by arch/arm/mach-omap2 hwmod code. With this binding and a related clock device driver we can start moving the clkctrl clock handling to live in drivers/clk/ti. Note that this binding allows keeping the clockdomain related parts out of drivers/clock. The CLKCTCTRL and DYNAMICDEP registers can be handled by a separate driver in drivers/soc/ti and genpd. If the clockdomain driver needs to know it's clocks, we can just set the the clkctrl device instances to be children of the related clockdomain device. Each clkctrl clock can have multiple optional gate clocks, and multiple optional mux clocks. To represent this in device tree, it seems that it is best done using four clock cells #clock-cells = <2> property. The reasons for using #clock-cells = <2> are: 1. We need to specify the clkctrl offset from the instance base. Otherwise we end up with a large number of device tree nodes that need to be patched when new clocks are discovered in a clkctrl clock with minor hardware revision changes for example 2. On omap5 CM_L3INIT_USB_HOST_HS_CLKCTRL has ten OPTFCLKEN bits. So we need to use a separate cell for optional gate clocks to avoid address space conflicts There is probably no need to list input clocks for each clkctrl clock instance in the binding. If we want to add them, the standard clocks binding can be used for that. For hardware reference, see omap4430 TRM "Table 3-1312. L4PER_CM2 Registers Mapping Summary" for example. It shows one instance of a clkctrl clock controller with multiple clkctrl registers. Cc: Paul Walmsley <paul@pwsan.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 14 Jun, 2017 5 commits
-
-
Stephen Boyd authored
* clk-fixes: clk: sunxi-ng: a64: Export PLL_PERIPH0 clock for the PRCM clk: sunxi-ng: h3: Export PLL_PERIPH0 clock for the PRCM dt-bindings: clock: sunxi-ccu: Add pll-periph to PRCM's needed clocks clk: sunxi-ng: enable SUNXI_CCU_MP for PRCM clk: sunxi-ng: v3s: Fix usb otg device reset bit clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset
-
Stephen Boyd authored
Merge tag 'sunxi-clk-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Allwinner clock fixes for 4.12 Some fixes that fix some bindings that went in 4.12, fix a few reset and clock offsets and a build error fix * tag 'sunxi-clk-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: a64: Export PLL_PERIPH0 clock for the PRCM clk: sunxi-ng: h3: Export PLL_PERIPH0 clock for the PRCM dt-bindings: clock: sunxi-ccu: Add pll-periph to PRCM's needed clocks clk: sunxi-ng: enable SUNXI_CCU_MP for PRCM clk: sunxi-ng: v3s: Fix usb otg device reset bit clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset
-
Stephen Boyd authored
Merge tag 'clk-v4.13-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-next Pull samsung clk driver updates from Sylwester Nawrocki - conversion to the clk_hw API - definitions and fixes of exynos5420 SoC audio subsystem related clocks * tag 'clk-v4.13-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk: clk: samsung: exynos542x: Add EPLL rate table clk: samsung: Add missing exynos5420 audio related clocks clk: samsung: Add enable/disable operation for PLL36XX clocks clk: samsung: s5pv210-audss: Convert to the new clk_hw API clk: samsung: exynos-clkout: Convert to the new clk_hw API clk: samsung: exynos-audss: Convert to the new clk_hw API clk: samsung: Convert common drivers to the new clk_hw API clk: samsung: Add local variable to match its purpose clk: samsung: Remove dead code
-
Stephen Boyd authored
Merge tag 'v4.13-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next Pull rockchip clk driver updates from Heiko Stuebner: One new clock controller for the rk3128 soc, a fixup for the rk3228 cpuclk table and the usual bunch of some new clock-ids and some clocks marked as critical. * tag 'v4.13-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: mark some special clk as critical on rk3368 clk: rockchip: mark noc and some special clk as critical on rk3288 clk: rockchip: mark noc and some special clk as critical on rk3228 clk: rockchip: mark pclk_ddrupctl as critical_clock on rk3036 clk: rockchip: add clock controller for rk3128 dt-bindings: add bindings for rk3128 clock controller clk: rockchip: export more rk3228 clocks ids clk: rockchip: add ids for rk3399 testclks used for camera handling clk: rockchip: add dt-binding header for rk3128 clk: rockchip: fix up the RK3228 clk cpu setting table clk: rockchip: add clock-ids for more rk3228 clocks clk: rockchip: add ids for camera on rk3399
-
Tero Kristo authored
In K2G, the clock handling is done through firmware executing on a separate core. Linux kernel needs to communicate to the firmware through TI system control interface to access any power management related resources, including clocks. The keystone sci-clk driver does this, by communicating to the firmware through the TI SCI driver. The driver adds support for registering clocks through DT, and basic required clock operations like prepare/get_rate, etc. Signed-off-by:
-
- 13 Jun, 2017 1 commit
-
-
Tero Kristo authored
Add a clock implementation, TI SCI clock, that will hook to the common clock framework, and allow each clock to be controlled via TI SCI protocol. Signed-off-by:
-
- 12 Jun, 2017 6 commits
-
-
Martin Blumenstingl authored
The clock controller on Meson8, Meson8b and Meson8m2 is very similar based on the code from the Amlogic GPL kernel sources. Add separate compatibles for each SoC to make sure that we can easily implement all the small differences for each SoC later on. In general the Meson8 and Meson8m2 seem to be almost identical as they even share the same mach-meson8 directory in Amlogic's GPL kernel sources. The main clocks on Meson8, Meson8b and Meson8m2 are very similar, because they are all using the same PLL values, 90% of the clock gates are the same (the actual diffstat of the mach-meson8/clock.c and mach-meson8b/clock.c files is around 30 to 40 lines, when excluding all commented out code). The difference between the Meson8 and Meson8b clock gates seem to be: - Meson8 has AIU_PCLK, HDMI_RX, VCLK2_ENCT, VCLK2_ENCL, UART3, CSI_DIG_CLKIN gates which don't seem to be available on Meson8b - the gate on Meson8 for bit 7 seems to be named "_1200XXX" instead of "PERIPHS_TOP" (on Meson8b) - Meson8b has a SANA gate which doesn't seem to exist on Meson8 (or on Meson8 the same bit is used by the UART3 gate in Amlogic's GPL kernel sources) None of these gates is added for now, since it's unclear whether these definitions are actually correct (the VCLK2_ENCT gate for example is defined, but only used in some commented block). The main difference between all three SoCs seem to be the video (VPU) clocks. Apart from different supported clock rates (according to vpu.c in mach-meson8 and mach-meson8b from Amlogic's GPL kernel sources) the most notable difference is that Meson8m2 has a GP_PLL clock and a mux (probably the same as on the Meson GX SoCs) to support glitch-free (clock rate) switching. None of these VPU clocks are not supported by our mainline meson8b clock driver yet though. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Martin Blumenstingl authored
Export the ethernet gate clock to the dt-bindings. Signed-off-by:
-
Martin Blumenstingl authored
Export the USB related clocks (for the USB controller and the USB2 PHYs) so they can be used in the dt-bindings. Signed-off-by:
-
Martin Blumenstingl authored
This exports the clock so it can be used in the dt-bindings. Signed-off-by:
-
Martin Blumenstingl authored
Export the SDIO clock so it can be used in the dt-bindings. Signed-off-by:
-
Martin Blumenstingl authored
Export the clocks for the SAR ADC so they can be used in the dt-bindings. Signed-off-by:
-
- 09 Jun, 2017 6 commits
-
-
Sylwester Nawrocki authored
A specific clock rate table is added for EPLL so it is possible to set frequency of the EPLL output clock as multiple of various audio sampling rates. Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com>
-
Sylwester Nawrocki authored
This patch adds missing definitions of mux clocks required for using EPLL as the audio subsystem root clock on exynos5420/exynos5422 SoCs. Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Tested-by:
-
Sylwester Nawrocki authored
The existing enable/disable ops for PLL35XX are made more generic and used also for PLL36XX. This fixes issues in the kernel with PLL36XX PLLs when the PLL has not been already enabled by bootloader. Reviewed-by:
-
Marek Szyprowski authored
Clock providers should use the new struct clk_hw based API, so convert Samsung S5PV210 Audio Subsystem clock provider to the new approach. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
-
Marek Szyprowski authored
Clock providers should use the new struct clk_hw based API, so convert Exynos CLKOUT clock provider to the new approach. Signed-off-by:
-
Marek Szyprowski authored
Clock providers should use the new struct clk_hw based API, so convert Exynos Audio Subsystem clock provider to the new approach. Signed-off-by:
-
- 07 Jun, 2017 12 commits
-
-
Marek Szyprowski authored
Clock providers should use the new struct clk_hw based API, so convert Samsung clock providers and their helper functions to the new approach. Signed-off-by:
-
Marek Szyprowski authored
Add new variable to avoid using clk pointer for different purposes across the exynos_register_cpu_clock() function. This will help in future rewrite for the new clk_hw API. Signed-off-by:
-
Marek Szyprowski authored
samsung_clk_register_pll2550x() function is not used anymore, so remove its declaration. Signed-off-by:
-
Stephen Boyd authored
We've run into kconfig missing dependency errors in the sunxi-ng code a couple times now. Each time the fix is to find the missing select statement and add it to the Kconfig entry for a particular SoC driver. Given that all this code is builtin (non-modular) we don't need to do this complicated dependency tracking in Kconfig. Instead we can move all the "library"ish code to be compiled as lib-y instead of obj-y, let the linker throw away unused code in the resulting vmlinux, and drop all the Kconfig stuff we use to track clock types. Suggested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The A83T's PRCM has the same set of clocks and resets as the A64. However, a few dividers are different. And due to the lack of a low speed 32.768 kHz oscillator, a few of the clock parents are different. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Chen-Yu Tsai authored
The A83T's PRCM has the same set of clocks and resets as the A64. However, a few dividers are different. And due to the lack of a low speed 32.768 kHz oscillator, a few of the clock parents are different. The PRCM also has controls for various power domains. These are not supported yet. Signed-off-by:
-
Arnd Bergmann authored
We get a link error when CCU_MULT is not set with the newly added driver: drivers/clk/sunxi-ng/ccu-sun8i-a83t.o:(.data.__compound_literal.1+0x4): undefined reference to `ccu_mult_ops' drivers/clk/sunxi-ng/ccu-sun8i-a83t.o:(.data.__compound_literal.3+0x4): undefined reference to `ccu_mult_ops' Fixes: 46b492116666 ("clk: sunxi-ng: Add driver for A83T CCU") Signed-off-by: -
Chen-Yu Tsai authored
The divider of the audio PLL has an offset of 1. Fix this in the driver. Signed-off-by:
-
Chen-Yu Tsai authored
The offset for the PLL lock status register was incorrectly set to 0x208, which actually points to an unused register. The correct register offset is 0x20c. Signed-off-by:
-
Chen-Yu Tsai authored
The A83T clock control unit is a hybrid of some new style clock designs from the A80, and old style layout from the other Allwinner SoCs. Like the A80, the SoC does not have a low speed 32.768 kHz oscillator. Unlike the A80, there is no clock input either. The only low speed clock available is the internal oscillator which runs at around 16 MHz, divided by 512, yielding a low speed clock around 31.250 kHz. Also, the MMC2 module clock supports switching to a "new timing" mode. This mode divides the clock output by half, and disables the CCU based clock delays. The MMC controller must be configure to the same mode, and then use its internal clock delays. This driver does not support runtime switching of the timing modes. Instead, the new timing mode is enforced at probe time. Consumers can check which mode is active by trying to get the current phase delay of the MMC2 phase clocks, which will return -ENOTSUPP if the new timing mode is active. Signed-off-by:
-
Chen-Yu Tsai authored
On the A83T, the AHB1 clock has a shared pre-divider on the two PLL-PERIPH clock parents. To support such instances of shared pre-dividers, this patch extends the mux clock type to support multiple variable pre-dividers. As the pre-dividers are only used to calculate the rate, but do not participate in the factorization process, this is fairly straightforward. Signed-off-by:
-
Chen-Yu Tsai authored
The A83T clock control unit is a hybrid of some new style clock designs from the A80, and old style layout from the other Allwinner SoCs. Like the A80, the SoC does not have a low speed 32.768 kHz oscillator. Unlike the A80, there is no clock input either. The only low speed clock available is the internal oscillator which runs at around 16 MHz, divided by 512, yielding a low speed clock around 31.250 kHz. Signed-off-by:
-
