- 26 Apr, 2019 25 commits
-
-
Julian Wiedmann authored
The QETH_MAX_BUFFER_ELEMENTS() macro effectively returns a constant value. To avoid some redundant pointer chasing and computations in the xmit hot path, cache this value in the queue struct. Take this as opportunity to shrink some of the queue struct's fields to their appropriate value range, slightly reducing its total size. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
On the first initialization of a queue, its Output Buffers are in a clean state with no attached resources. On every subsequent initialization, qeth_l?_stop_card() has previously put them in a clean state via qeth_drain_output_queues(). So the call to qeth_clear_output_buffer() is redundant and can be removed. While at it, move the initialization of the queue's card pointer into the queue allocation. It never changes afterwards. Signed-off-by:
-
Julian Wiedmann authored
We have helper macros for all possible device types, replace all remaining open-coded accesses to the type fields. Signed-off-by:
-
Julian Wiedmann authored
We don't keep track of Input Buffer states, so remove the comments that make it sound like the qeth_qdio_buffer_states enum applies to Input Buffers. Signed-off-by:
-
Julian Wiedmann authored
It's unclear what exact purpose this seqno may have served in the past. But it's certainly no longer used anymore, as the following napi_gro_receive() will straight away clear this part of the cb again. Suggested-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
clang produces a harmless warning for each use for the qeth_adp_supported macro: drivers/s390/net/qeth_l2_main.c:559:31: warning: implicit conversion from enumeration type 'enum qeth_ipa_setadp_cmd' to different enumeration type 'enum qeth_ipa_funcs' [-Wenum-conversion] if (qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE)) ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/net/qeth_core.h:179:41: note: expanded from macro 'qeth_adp_supported' qeth_is_ipa_supported(&c->options.adp, f) ~~~~~~~~~~~~~~~~~~~~~ ^ Add a version of this macro that uses the correct types, and remove the unused qeth_adp_enabled() macro that has the same problem. Reviewed-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== netdevsim: implement proper device model Currently the model of netdevsim is a bit odd in multiple ways. 1) devlink instance is not in any way related with actual netdevsim netdevices. Instead, it is created per-namespace. 2) multi-port netdevsim device is done using "link" attribute. 3) netdevsim bus is there only to have something to bind the netdev to, it really does not act as a bus. 4) netdevsim instances are created by "ip link add" which is great for soft devices with no hw backend. The rtnl core allocates netdev and calls into driver holding rtnl mutex. For hw-backed devices, this flow is wrong as it breaks order in which things are done. This patchset adjust netdevsim to fix all above. In order to support proper devlink and devlink port instances and to be able to emulate real devices, there is need to implement bus probe and instantiate everything from there. User can specify device id and port count to be instantianted. For example: $ echo "10 4" > /sys/bus/netdevsim/new_device Then devlink shows this: $ devlink dev netdevsim/netdevsim10 $ devlink port netdevsim/netdevsim10/0: type eth netdev eni0np1 flavour physical netdevsim/netdevsim10/1: type eth netdev eni0np2 flavour physical netdevsim/netdevsim10/2: type eth netdev eni0np3 flavour physical netdevsim/netdevsim10/3: type eth netdev eni0np4 flavour physical There is possible to add and delete ports using their indexes during netdevsim device lifetime like this: Then devlink shows this: $ devlink port netdevsim/netdevsim10/1: type eth netdev eni10np2 flavour physical netdevsim/netdevsim10/2: type eth netdev eni10np3 flavour physical netdevsim/netdevsim10/3: type eth netdev eni10np4 flavour physical netdevsim/netdevsim10/43: type eth netdev eni10np44 flavour physical Debugfs topology is also adjusted a bit. The rest stays the same as before. Udev bits are merged un systemd upstream git: https://github.com/systemd/systemd/commit/eaa9d507d85509c8bf727356e3884ec54b0fc646 See individual patches for changelog. ==================== Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jiri Pirko authored
Implement ndo_get_devlink_port and allow switch_id and port_name to be handled by devlink. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by:
-
Jiri Pirko authored
In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by:
-
Jiri Pirko authored
Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by:
-
Jiri Pirko authored
With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by:
-
Jiri Pirko authored
Current implementation of parent_id/switch_id does not follow the original idea of being unique. The values are "0", "1", etc. Instead of that, generate 32 random bytes. Signed-off-by:
-
Jiri Pirko authored
As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by:
-
Jiri Pirko authored
These functions are going to be called from bus probe/release(), therefore make them independent on ns struct and rename accordingly. Signed-off-by:
-
Jiri Pirko authored
Add a way to add new netdevsim device on netdevsim bus and also to delete existing netdevsim device from the bus. Track the bus devices in using a list. Signed-off-by:
-
Jiri Pirko authored
Instead of increments of u32 value, use ida to manage bus device ids. Signed-off-by:
-
Jiri Pirko authored
In order to bus probing to work correctly, register a simple netdevsim driver implementation. Signed-off-by:
-
Jiri Pirko authored
Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by:
-
Jiri Pirko authored
As the code related to netdevsim bus is going to get bigger, move the existing code to a separate file. Signed-off-by:
-
Jiri Pirko authored
The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by:
-
Jiri Pirko authored
Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by:
-
Jiri Pirko authored
As a dependency of the subsequent patch, mode device registration to be done earlier, directly in nsim_newlink(). Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2019-04-25 Here's the main bluetooth-next pull request for the 5.2 kernel. - Added support for Mediatek SDIO controllers - Added support for Broadcom BCM2076B1 UART controller - Added support for Marvel SD8987 chipset - Fix buffer overflow bug in hidp protocol - Various other smaller fixes & improvements Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Two easy cases of overlapping changes. Signed-off-by:
-
- 25 Apr, 2019 1 commit
-
-
Marcel Holtmann authored
The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org
-
- 24 Apr, 2019 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Just the usual assortment of small'ish fixes: 1) Conntrack timeout is sometimes not initialized properly, from Alexander Potapenko. 2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid undefined behavior. From ZhangXiaoxu. 3) des1 field of descriptor in stmmac driver is initialized with the wrong variable. From Yue Haibing. 4) Increase mlxsw pci sw reset timeout a little bit more, from Ido Schimmel. 5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng. 6) Fallback refcount fix in TLS code, from Jakub Kicinski. 7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy. 8) Fix recursive locking in team driver, from Hangbin Liu. 9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski. 10) Don't use napi_alloc_frag() outside of softiq context of socionext driver, from Ilias Apalodimas. 11) MAC address increment overflow in ncsi, from Tao Ren. 12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun. 13) ipv4_link_failure has to validate the headers that are actually there because RAW sockets can pass in arbitrary garbage, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) ipv4: add sanity checks in ipv4_link_failure() net/rose: fix unbound loop in rose_loopback_timer() rxrpc: fix race condition in rxrpc_input_packet() net: rds: exchange of 8K and 1M pool net: vrf: Fix operation not supported when set vrf mac net/ncsi: handle overflow when incrementing mac address net: socionext: replace napi_alloc_frag with the netdev variant on init net: atheros: fix spelling mistake "underun" -> "underrun" spi: ST ST95HF NFC: declare missing of table spi: Micrel eth switch: declare missing of table net: stmmac: move stmmac_check_ether_addr() to driver probe netfilter: fix nf_l4proto_log_invalid to log invalid packets netfilter: never get/set skb->tstamp netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK dt-bindings: add an explanation for internal phy-mode net/tls: don't leak IV and record seq when offload fails net/tls: avoid potential deadlock in tls_set_device_offload_rx() selftests/net: correct the return value for run_afpackettests team: fix possible recursive locking when add slaves ... -
Linus Torvalds authored
Merge tag 'leds-for-5.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED update from Jacek Anaszewski: "A single change to MAINTAINERS: We announce a new LED reviewer - Dan Murphy" * tag 'leds-for-5.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: MAINTAINERS: LEDs: Add designated reviewer for LED subsystem
-
Eric Dumazet authored
Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by:Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Eric Dumazet authored
This patch adds a limit on the number of skbs that fuzzers can queue into loopback_queue. 1000 packets for rose loopback seems more than enough. Then, since we now have multiple cpus in most linux hosts, we also need to limit the number of skbs rose_loopback_timer() can dequeue at each round. rose_loopback_queue() can be drop-monitor friendly, calling consume_skb() or kfree_skb() appropriately. Finally, use mod_timer() instead of del_timer() + add_timer() syzbot report was : rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=536/1/0x4000000000000002 softirq=103291/103291 fqs=34 rcu: (t=10500 jiffies g=140321 q=323) rcu: rcu_preempt kthread starved for 10426 jiffies! g140321 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1 rcu: RCU grace-period kthread stack dump: rcu_preempt I29168 10 2 0x80000000 Call Trace: context_switch kernel/sched/core.c:2877 [inline] __schedule+0x813/0x1cc0 kernel/sched/core.c:3518 schedule+0x92/0x180 kernel/sched/core.c:3562 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803 rcu_gp_fqs_loop kernel/rcu/tree.c:1971 [inline] rcu_gp_kthread+0x962/0x17b0 kernel/rcu/tree.c:2128 kthread+0x357/0x430 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 NMI backtrace for cpu 0 CPU: 0 PID: 7632 Comm: kworker/0:4 Not tainted 5.1.0-rc5+ #172 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events iterate_cleanup_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1223 print_cpu_stall kernel/rcu/tree.c:1360 [inline] check_cpu_stall kernel/rcu/tree.c:1434 [inline] rcu_pending kernel/rcu/tree.c:3103 [inline] rcu_sched_clock_irq.cold+0x500/0xa4a kernel/rcu/tree.c:2544 update_process_times+0x32/0x80 kernel/time/timer.c:1635 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271 __run_hrtimer kernel/time/hrtimer.c:1389 [inline] __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline] smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x50 kernel/kcov.c:95 Code: 89 25 b4 6e ec 08 41 bc f4 ff ff ff e8 cd 5d ea ff 48 c7 05 9e 6e ec 08 00 00 00 00 e9 a4 e9 ff ff 90 90 90 90 90 90 90 90 90 <55> 48 89 e5 48 8b 75 08 65 48 8b 04 25 00 ee 01 00 65 8b 15 c8 60 RSP: 0018:ffff8880ae807ce0 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: ffff88806fd40640 RBX: dffffc0000000000 RCX: ffffffff863fbc56 RDX: 0000000000000100 RSI: ffffffff863fbc1d RDI: ffff88808cf94228 RBP: ffff8880ae807d10 R08: ffff88806fd40640 R09: ffffed1015d00f8b R10: ffffed1015d00f8a R11: 0000000000000003 R12: ffff88808cf941c0 R13: 00000000fffff034 R14: ffff8882166cd840 R15: 0000000000000000 rose_loopback_timer+0x30d/0x3f0 net/rose/rose_loopback.c:91 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
After commit 5271953c ("rxrpc: Use the UDP encap_rcv hook"), rxrpc_input_packet() is directly called from lockless UDP receive path, under rcu_read_lock() protection. It must therefore use RCU rules : - udp_sk->sk_user_data can be cleared at any point in this function. rcu_dereference_sk_user_data() is what we need here. - Also, since sk_user_data might have been set in rxrpc_open_socket() we must observe a proper RCU grace period before kfree(local) in rxrpc_lookup_local() v4: @local can be NULL in xrpc_lookup_local() as reported by kbuild test robot <lkp@intel.com> and Julia Lawall <julia.lawall@lip6.fr>, thanks ! v3,v2 : addressed David Howells feedback, thanks ! syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 19236 Comm: syz-executor703 Not tainted 5.1.0-rc6 #79 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xbef/0x3fb0 kernel/locking/lockdep.c:3573 Code: 00 0f 85 a5 1f 00 00 48 81 c4 10 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 21 00 00 49 81 7d 00 20 54 9c 89 0f 84 cf f4 RSP: 0018:ffff88809d7aef58 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000026 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88809d7af090 R08: 0000000000000001 R09: 0000000000000001 R10: ffffed1015d05bc7 R11: ffff888089428600 R12: 0000000000000000 R13: 0000000000000130 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f059044d700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b6040 CR3: 00000000955ca000 CR4: 00000000001406f0 Call Trace: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152 skb_queue_tail+0x26/0x150 net/core/skbuff.c:2972 rxrpc_reject_packet net/rxrpc/input.c:1126 [inline] rxrpc_input_packet+0x4a0/0x5536 net/rxrpc/input.c:1414 udp_queue_rcv_one_skb+0xaf2/0x1780 net/ipv4/udp.c:2011 udp_queue_rcv_skb+0x128/0x730 net/ipv4/udp.c:2085 udp_unicast_rcv_skb.isra.0+0xb9/0x360 net/ipv4/udp.c:2245 __udp4_lib_rcv+0x701/0x2ca0 net/ipv4/udp.c:2301 udp_rcv+0x22/0x30 net/ipv4/udp.c:2482 ip_protocol_deliver_rcu+0x60/0x8f0 net/ipv4/ip_input.c:208 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x1e1/0x300 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0x115/0x1a0 net/core/dev.c:4987 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5099 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5202 napi_frags_finish net/core/dev.c:5769 [inline] napi_gro_frags+0xade/0xd10 net/core/dev.c:5843 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:1866 [inline] do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681 do_iter_write fs/read_write.c:957 [inline] do_iter_write+0x184/0x610 fs/read_write.c:938 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002 do_writev+0x15e/0x370 fs/read_write.c:1037 __do_sys_writev fs/read_write.c:1110 [inline] __se_sys_writev fs/read_write.c:1107 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 5271953c ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Dan Murphy authored
Add a designated reviewer for the LED subsystem as there are already two maintainers assigned. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com>
-
Zhu Yanjun authored
Before the commit 490ea596 ("RDS: IB: move FMR code to its own file"), when the dirty_count is greater than 9/10 of max_items of 8K pool, 1M pool is used, Vice versa. After the commit 490ea596 ("RDS: IB: move FMR code to its own file"), the above is removed. When we make the following tests. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M The following will appear. " connecting to 1.1.1.16:4000 negotiated options, tasks will start in 2 seconds Starting up..header from 1.1.1.166:4001 to id 4001 bogus .. tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 ... " So this exchange between 8K and 1M pool is added back. Fixes: commit 490ea596 ("RDS: IB: move FMR code to its own file") Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Vlad Buslov authored
Recent changes that introduced unlocked flower did not properly account for case when reoffload is initiated concurrently with filter updates. To fix the issue, extend flower with 'hw_filters' list that is used to store filters that don't have 'skip_hw' flag set. Filter is added to the list when it is inserted to hardware and only removed from it after being unoffloaded from all drivers that parent block is attached to. This ensures that concurrent reoffload can still access filter that is being deleted and prevents race condition when driver callback can be removed when filter is no longer accessible trough idr, but is still present in hardware. Refactor fl_change() to respect new filter reference counter and to release filter reference with __fl_put() in case of error, instead of directly deallocating filter memory. This allows for concurrent access to filter from fl_reoffload() and protects it with reference counting. Refactor fl_reoffload() to iterate over hw_filters list instead of idr. Implement fl_get_next_hw_filter() helper function that is used to iterate over hw_filters list with reference counting and skips filters that are being concurrently deleted. Fixes: 92149190 ("net: sched: flower: set unlocked flag for flower proto ops") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Rosen Penev authored
It allows some of the code to be simplified. Tested on Turris Omnia. Signed-off-by:
Rosen Penev <rosenp@gmail.com> Signed-off-by:
-
Eric Dumazet authored
First thing tipc_udp_recv() does is to use rcu_dereference_sk_user_data(), and this is really hinting we already own rcu_read_lock() from the caller (UDP stack). No need to add another rcu_read_lock()/rcu_read_unlock() pair. Also use rcu_dereference() instead of rcu_dereference_rtnl() in the data path. Signed-off-by:
-
Miaohe Lin authored
Vrf device is not able to change mac address now because lack of ndo_set_mac_address. Complete this in case some apps need to do this. Reported-by:
Hui Wang <wanghui104@huawei.com> Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Balakrishna Godavarthi authored
When flag HCI_QUIRK_USE_BDADDR_PROPERTY is set, we will read the bluetooth address from dts. If the bluetooth address node is missing from the dts we will enable it controller UNCONFIGURED state. This patch enables the normal flow even if the BD address is missing from the dts tree. Signed-off-by:
Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by:
Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by:
-
David Ahern authored
arg.result is sometimes used as fib6_result and sometimes used to hold the rt6_info. Add rt6_info to fib6_result and make the use of arg.result consistent through ipv6 rules. The rt6 entry is filled in for lookups returning a dst_entry, but not for direct fib_lookups that just want a fib6_info. Fixes: effda4dd ("ipv6: Pass fib6_result to fib lookups") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
fib rule actions should return -EAGAIN for the rules to continue to the next one. A recent change overwrote err with the lookup always returning 0 (future change will make it more like IPv4) which means the rules stopped at the first (e.g., local table lookup only). Catch and reset err to -EAGAIN. Fixes: effda4dd ("ipv6: Pass fib6_result to fib lookups") Signed-off-by:
-
