- 25 Sep, 2013 17 commits
-
-
Roy Franz authored
warnings from gcc: warning: label 'free_pool' defined but not used [-Wunused-label] warning: value computed is not used [-Wunused-value] Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
EFI calls can made directly on ARM, so the function pointers are directly invoked. This allows types to be checked at compile time, so here we ensure that the parameters match the function signature. The wrappers used by x86 prevent any type checking. Correct the type of chunksize to be based on native width as specified by the EFI_FILE_PROTOCOL read() function. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
Rename variables to be not initrd specific, as now the function loads arbitrary files. This change is exclusively renames and comment changes to reflect the generalization. Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Mark Salter <msalter@redhat.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
The handle_cmdline_files now takes the option to handle as a string, and returns the loaded data through parameters, rather than taking an x86 specific setup_header structure. For ARM, this will be used to load a device tree blob in addition to initrd images. Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Mark Salter <msalter@redhat.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
Make efi_free() safely callable with size of 0, similar to free() being callable with NULL pointers, and do nothing in that case. Remove size checks that this makes redundant. This also avoids some size checks in the ARM EFI stub code that will be added as well. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
Replace the open-coded memory map getting with the efi_get_memory_map() that is now general enough to use. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
Add arguments for returning the descriptor version and also the memory map key. The key is required for calling exit_boot_services(). Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
Rename function in preparation for making it more flexible and sharing it. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
Move the open-coded conversion to a shared function for use by all architectures. Change the allocation to prefer a high address for ARM, as this is required to avoid conflicts with reserved regions in low memory. We don't know the specifics of these regions until after we process the command line and device tree. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
Rename relocate_kernel() to efi_relocate_kernel(), and take parameters rather than x86 specific structure. Add max_addr argument as for ARM we have some address constraints that we need to enforce when relocating the kernel. Add alloc_size parameter for use by ARM64 which uses an uncompressed kernel, and needs to allocate space for BSS. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
The relocate_kernel() function will be generalized and used by all architectures, as they all have similar requirements. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
The efi_high_alloc() and efi_low_alloc() functions use the EFI_ALLOCATE_ADDRESS option to the EFI function allocate_pages(), which requires a minimum of page alignment, and rejects all other requests. The existing code could fail to allocate depending on allocation size, as although repeated allocation attempts were made, none were guaranteed to be page aligned. Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Mark Salter <msalter@redhat.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
Rename them to be more similar, as low_free() could be used to free memory allocated by both high_alloc() and low_alloc(). high_alloc() -> efi_high_alloc() low_alloc() -> efi_low_alloc() low_free() -> efi_free() Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Mark Salter <msalter@redhat.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
Add system table pointer argument to shared EFI stub related functions so they no longer use a global system table pointer as they did when part of eboot.c. For the ARM EFI stub this allows us to avoid global variables completely and thereby not have to deal with GOT fixups. Not having the EFI stub fixup its GOT, which is shared with the decompressor, simplifies the relocating of the zImage to a bootable address. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
No code changes made, just moving functions and #define from x86 arch directory to common location. Code is shared using #include, similar to how decompression code is shared among architectures. Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Mark Salter <msalter@redhat.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
The x86/AMD64 EFI stubs must use a call wrapper to convert between the Linux and EFI ABIs, so void pointers are sufficient. For ARM, the ABIs are compatible, so we can directly invoke the function pointers. The functions that are used by the ARM stub are updated to match the EFI definitions. Also add some EFI types used by EFI functions. Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Mark Salter <msalter@redhat.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Roy Franz authored
Move efi-stub.txt out of x86 directory and into common directory in preparation for adding ARM EFI stub support. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
- 05 Sep, 2013 3 commits
-
-
Leif Lindholm authored
efi_lookup_mapped_addr() is a handy utility for other platforms than x86. Move it from arch/x86 to drivers/firmware. Add memmap pointer to global efi structure, and initialise it on x86. Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Leif Lindholm authored
Common to (U)EFI support on all platforms is the global "efi" data structure, and the code that parses the System Table to locate addresses to populate that structure with. This patch adds both of these to the global EFI driver code and removes the local definition of the global "efi" data structure from the x86 and ia64 code. Squashed into one big patch to avoid breaking bisection. Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
Leif Lindholm authored
early_ioremap() on IA64 chooses its mapping type based on the EFI memory map. This patch adds an alias "early_memremap()" to be used where the targeted location is memory rather than an i/o device. Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
- 02 Sep, 2013 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "This is a bug fix for the pm80xx driver. It turns out that when the new hardware support was added in 3.10 the IO command size was kept at the old hard coded value. This means that the driver attaches to some new cards and then simply hangs the system" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] pm80xx: fix Adaptec 71605H hang
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot fix from Peter Anvin: "A single very small boot fix for very large memory systems (> 0.5T)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix boot crash with DEBUG_PAGE_ALLOC=y and more than 512G RAM
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dma fix from Vinod Koul: "A fix for resolving TI_EDMA driver's build error in allmodconfig to have filter function built in"" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma/Kconfig: TI_EDMA needs to be boolean
-
- 31 Aug, 2013 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) There was a simplification in the ipv6 ndisc packet sending attempted here, which avoided using memory accounting on the per-netns ndisc socket for sending NDISC packets. It did fix some important issues, but it causes regressions so it gets reverted here too. Specifically, the problem with this change is that the IPV6 output path really depends upon there being a valid skb->sk attached. The reason we want to do this change in some form when we figure out how to do it right, is that if a device goes down the ndisc_sk socket send queue will fill up and block NDISC packets that we want to send to other devices too. That's really bad behavior. Hopefully Thomas can come up with a better version of this change. 2) Fix a severe TCP performance regression by reverting a change made to dev_pick_tx() quite some time ago. From Eric Dumazet. 3) TIPC returns wrongly signed error codes, fix from Erik Hugne. 4) Fix OOPS when doing IPSEC over ipv4 tunnels due to orphaning the skb->sk too early. Fix from Li Hongjun. 5) RAW ipv4 sockets can use the wrong routing key during lookup, from Chris Clark. 6) Similar to #1 revert an older change that tried to use plain alloc_skb() for SYN/ACK TCP packets, this broke the netfilter owner mark which needs to see the skb->sk for such frames. From Phil Oester. 7) BNX2x driver bug fixes from Ariel Elior and Yuval Mintz, specifically in the handling of virtual functions. 8) IPSEC path error propagations to sockets is not done properly when we have v4 in v6, and v6 in v4 type rules. Fix from Hannes Frederic Sowa. 9) Fix missing channel context release in mac80211, from Johannes Berg. 10) Fix network namespace handing wrt. SCM_RIGHTS, from Andy Lutomirski. 11) Fix usage of bogus NAPI weight in jme, netxen, and ps3_gelic drivers. From Michal Schmidt. 12) Hopefully a complete and correct fix for the genetlink dump locking and module reference counting. From Pravin B Shelar. 13) sk_busy_loop() must do a cpu_relax(), from Eliezer Tamir. 14) Fix handling of timestamp offset when restoring a snapshotted TCP socket. From Andrew Vagin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: fec: fix time stamping logic after napi conversion net: bridge: convert MLDv2 Query MRC into msecs_to_jiffies for max_delay mISDN: return -EINVAL on error in dsp_control_req() net: revert 8728c544 ("net: dev_pick_tx() fix") Revert "ipv6: Don't depend on per socket memory for neighbour discovery messages" ipv4 tunnels: fix an oops when using ipip/sit with IPsec tipc: set sk_err correctly when connection fails tcp: tcp_make_synack() should use sock_wmalloc bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 ones ipv6: Don't depend on per socket memory for neighbour discovery messages ipv4: sendto/hdrincl: don't use destination address found in header tcp: don't apply tsoffset if rcv_tsecr is zero tcp: initialize rcv_tstamp for restored sockets net: xilinx: fix memleak net: usb: Add HP hs2434 device to ZLP exception table net: add cpu_relax to busy poll loop net: stmmac: fixed the pbl setting with DT genl: Hold reference on correct module while netlink-dump. genl: Fix genl dumpit() locking. xfrm: Fix potential null pointer dereference in xdst_queue_output ...
-
Ian Campbell authored
Filtering capabilities on my work email are pretty much non-existent and this has turned out to be something of a firehose... Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Olof Johansson <olof@lixom.net> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This contains two Oops fixes (opti9xx and HD-audio) and a simple fixup for an Acer laptop. All marked as stable patches" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: opti9xx: Fix conflicting driver object name ALSA: hda - Fix NULL dereference with CONFIG_SND_DYNAMIC_MINORS=n ALSA: hda - Add inverted digital mic fixup for Acer Aspire One
-
- 30 Aug, 2013 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Two straggling fixes that I had missed as they were posted a couple of weeks ago, causing problems with interrupts (breaking them completely) on the CSR SiRF platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm: prima2: drop nr_irqs in mach as we moved to linear irqdomain irqchip: sirf: move from legacy mode to linear irqdomain
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Since we are getting to the pointy end, one i915 black screen on some machines, and one vmwgfx stop userspace ability to nuke the VM, There might be one or two ati or nouveau fixes trickle in before final, but I think this should pretty much be it" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Split GMR2_REMAP commands if they are to large drm/i915: ivb: fix edp voltage swing reg val
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input layer updates from Dmitry Torokhov: "Just a couple of new IDs in Wacom and xpad drivers, i8042 is now disabled on ARC, and data checks in Elantech driver that were overly relaxed by the previous patch are now tightened" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - disable the driver on ARC platforms Input: xpad - add signature for Razer Onza Classic Edition Input: elantech - fix packet check for v3 and v4 hardware Input: wacom - add support for 0x300 and 0x301
-
Richard Cochran authored
Commit dc975382 "net: fec: add napi support to improve proformance" converted the fec driver to the napi model. However, that commit forgot to remove the call to skb_defer_rx_timestamp which is only needed in non-napi drivers. (The function napi_gro_receive eventually calls netif_receive_skb, which in turn calls skb_defer_rx_timestamp.) This patch should also be applied to the 3.9 and 3.10 kernels. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
While looking into MLDv1/v2 code, I noticed that bridging code does not convert it's max delay into jiffies for MLDv2 messages as we do in core IPv6' multicast code. RFC3810, 5.1.3. Maximum Response Code says: The Maximum Response Code field specifies the maximum time allowed before sending a responding Report. The actual time allowed, called the Maximum Response Delay, is represented in units of milliseconds, and is derived from the Maximum Response Code as follows: [...] As we update timers that work with jiffies, we need to convert it. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Linus Lüssing <linus.luessing@web.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
If skb->len is too short then we should return an error. Otherwise we read beyond the end of skb->data for several bytes. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
commit 8728c544 ("net: dev_pick_tx() fix") and commit b6fe83e9 ("bonding: refine IFF_XMIT_DST_RELEASE capability") are quite incompatible : Queue selection is disabled because skb dst was dropped before entering bonding device. This causes major performance regression, mainly because TCP packets for a given flow can be sent to multiple queues. This is particularly visible when using the new FQ packet scheduler with MQ + FQ setup on the slaves. We can safely revert the first commit now that 416186fb ("net: Split core bits of netdev_pick_tx into __netdev_pick_tx") properly caps the queue_index. Reported-by: Xi Wang <xii@google.com> Diagnosed-by: Xi Wang <xii@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Denys Fedorysychenko <nuclearcat@nuclearcat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 1f324e38. It seems to cause regressions, and in particular the output path really depends upon there being a socket attached to skb->sk for checks such as sk_mc_loop(skb->sk) for example. See ip6_output_finish2(). Reported-by: Stephen Warren <swarren@wwwdotorg.org> Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li Hongjun authored
Since commit 3d7b46cd (ip_tunnel: push generic protocol handling to ip_tunnel module.), an Oops is triggered when an xfrm policy is configured on an IPv4 over IPv4 tunnel. xfrm4_policy_check() calls __xfrm_policy_check2(), which uses skb_dst(skb). But this field is NULL because iptunnel_pull_header() calls skb_dst_drop(skb). Signed-off-by: Li Hongjun <hongjun.li@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Erik Hugne authored
Should a connect fail, if the publication/server is unavailable or due to some other error, a positive value will be returned and errno is never set. If the application code checks for an explicit zero return from connect (success) or a negative return (failure), it will not catch the error and subsequent send() calls will fail as shown from the strace snippet below. socket(0x1e /* PF_??? */, SOCK_SEQPACKET, 0) = 3 connect(3, {sa_family=0x1e /* AF_??? */, sa_data="\2\1\322\4\0\0\322\4\0\0\0\0\0\0"}, 16) = 111 sendto(3, "test", 4, 0, NULL, 0) = -1 EPIPE (Broken pipe) The reason for this behaviour is that TIPC wrongly inverts error codes set in sk_err. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Phil Oester authored
In commit 90ba9b19 (tcp: tcp_make_synack() can use alloc_skb()), Eric changed the call to sock_wmalloc in tcp_make_synack to alloc_skb. In doing so, the netfilter owner match lost its ability to block the SYNACK packet on outbound listening sockets. Revert the change, restoring the owner match functionality. This closes netfilter bugzilla #847. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
Currently we would still potentially suffer multicast packet loss if there is just either an IGMP or an MLD querier: For the former case, we would possibly drop IPv6 multicast packets, for the latter IPv4 ones. This is because we are currently assuming that if either an IGMP or MLD querier is present that the other one is present, too. This patch makes the behaviour and fix added in "bridge: disable snooping if there is no querier" (b00589af) to also work if there is either just an IGMP or an MLD querier on the link: It refines the deactivation of the snooping to be protocol specific by using separate timers for the snooped IGMP and MLD queries as well as separate timers for our internal IGMP and MLD queriers. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fix from Tejun Heo: "During the percpu reference counting update which was merged during v3.11-rc1, the cgroup destruction path was updated so that a cgroup in the process of dying may linger on the children list, which was necessary as the cgroup should still be included in child/descendant iteration while percpu ref is being killed. Unfortunately, I forgot to update cgroup destruction path accordingly and cgroup destruction may fail spuriously with -EBUSY due to lingering dying children even when there's no live child left - e.g. "rmdir parent/child parent" will usually fail. This can be easily fixed by iterating through the children list to verify that there's no live child left. While this is very late in the release cycle, this bug is very visible to userland and I believe the fix is relatively safe. Thanks Hugh for spotting and providing fix for the issue" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix rmdir EBUSY regression in 3.11
-