- 02 Aug, 2018 2 commits
-
-
Andy Shevchenko authored
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Bring in bitmap API improvements.
-
- 01 Aug, 2018 3 commits
-
-
Andy Shevchenko authored
A lot of code become ugly because of open coding allocations for bitmaps. Introduce three helpers to allow users be more clear of intention and keep their code neat. Note, due to multiple circular dependencies we may not provide the helpers as inliners. For now we keep them exported and, perhaps, at some point in the future we will sort out header inclusion and inheritance. Signed-off-by:
-
Andy Shevchenko authored
bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by:
Shaohua Li <shli@kernel.org> Signed-off-by:
-
Andy Shevchenko authored
bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand DM bitmap API is special case. Adding 'dm' prefix to it to avoid potential name space collision. No functional changes intended. Suggested-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
- 31 Jul, 2018 2 commits
-
-
Vinod Koul authored
Since handling is abstracted in this driver, we need to add resin entry in id table along with pwrkey_data. Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Vinod Koul authored
In order to support resin thru the pwrkey driver (they are very similar in nature) we need to abstract the handling in this driver. First we abstract pull_up_bit and status_bit along in driver data. The event code sent for key events is quiried from DT. Since the device can be child of pon lookup regmap and reg from parent if lookup fails (we are child). Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 27 Jul, 2018 19 commits
-
-
Tim Schumacher authored
* btn_avb_pegasus and btn_avb_tw are the same. Unify them into btn_joystick_avb. * btn_wheel is an exact copy of btn_joystick, so remove it. Rename btn_avb_wheel into btn_wheel since it is the only sane configuration for a wheel. * Assign the (new) btn_wheel configuration to the "AVB Top Shot Force Feedback Racing Wheel", because the previous configuration was meant for a joystick. Signed-off-by:
Tim Schumacher <timschumi@gmx.de> Signed-off-by:
-
Nick Dyer authored
Signed-off-by:
Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by:
-
Nick Dyer authored
If T9.CTRL DISAMP is set, then pressure is reported as zero. This means some app layers (eg tslib) will ignore the contact. Signed-off-by:
-
Nick Dyer authored
We use sscanf to parse the configuration file, so it's necessary to zero terminate the configuration otherwise a truncated file can cause the parser to run off into uninitialised memory. Signed-off-by:
-
Nick Dyer authored
Signed-off-by:
-
Nick Dyer authored
On devices with the T71 object, the config CRC will start there, rather than at T7. Signed-off-by:
-
Nick Dyer authored
Signed-off-by:
-
Nick Dyer authored
Signed-off-by:
-
Nick Dyer authored
Signed-off-by:
-
Nick Dyer authored
The driver only registers one input device, which uses the screen parameters from the first T9 instance. The first T63 instance also uses those parameters. It is incorrect to send input reports from the second instances of these objects if they are enabled: the input scaling will be wrong and the positions will be mashed together. This also causes problems on Android if the number of slots exceeds 32. In the future, this could be handled by looking for enabled touch object instances and creating an input device for each one. Signed-off-by:
Benson Leung <bleung@chromium.org> Acked-by:
Yufeng Shen <miletus@chromium.org> Signed-off-by:
-
Jia-Ju Bai authored
aiptek_probe() is never called in atomic context. It calls usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
atp_open(), atp_recover() and atp_resume() are never called in atomic context. They call usb_submit_urb() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
usb_probe() is never called in atomic context. It calls usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
powermate_alloc_buffers() is never called in atomic context. It calls usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
keyspan_probe() is never called in atomic context. It calls usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Jia-Ju Bai authored
wdt87xx_resume() is never called in atomic context. It calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by:
-
Tim Schumacher authored
Move BTN_DEAD into the arrays with the specific button sets instead of assigning it for every iforce device. BTN_DEAD represents an optical sensor which detects if the user is interacting with the device. On devices without that optical sensor BTN_DEAD is repeatedly causing false inputs on every status update of the joystick. Signed-off-by:
-
Tim Schumacher authored
Previously, packets that have been dumped are shown in the kernel log like this: drivers/input/joystick/iforce/iforce-packets.c: info cmd = ff04, data = 56 02 04 00 Use dev_dbg to dump the packages only when requested and to list the parent device as well. Use printf logic to generate the hexdump instead of looping through every char that needs to be printed (which in turn fixes the unnecessary newlines and looks more clean in general). The resulting package dump output does now look like this: usb 2-8: iforce_dump_packet info cmd = ff04, data = 56 02 04 00 Signed-off-by:
-
Dmitry Torokhov authored
I do not think Vojtech wants snail mail these days (and he mentioned that nobody has ever sent him snail mail), and the address is not even valid anymore, so let's remove snail-mail instructions from the sources. Acked-by:
Vojtech Pavlik <vojtech@suse.cz> Signed-off-by:
-
- 25 Jul, 2018 5 commits
-
-
Dmitry Torokhov authored
Instead of splitting probe code into separate USB and input setup, flatten it. This allows for easier inspection of order of set up steps, since the probe code is reasonably small. Move input-related initialization (phys) from USB block to input block. Reviewed-by:
Marcus Folkesson <marcus.folkesson@gmail.com> Tested-by:
-
Dmitry Torokhov authored
There is no need to store data buffer size, pointer to the buffer, or endpoint address in pxrc structure, as they are either only needed during setup, or are available from elsewhere. Reviewed-by:
-
Dmitry Torokhov authored
There is no need to have the device table first in the file. Reviewed-by:
-
Dmitry Torokhov authored
URB is the only resource that is not managed, and thus is destroyed too early, before we unregister input device and stop URB in pxrc_close(). To fix it let's install custom devm handler to free the URB at the right time in devm unwind sequence. Reviewed-by:
-
Marcus Folkesson authored
The USB device is only needed during setup, so put it back after initialization and do not store it in our private struct. Also, the USB device is a parent of USB interface so our driver model rules ensure that USB device should not disappear while interface device is still there; there is no need to take reference to the USB device. Reported-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
- 18 Jul, 2018 2 commits
-
-
Matti Vaittinen authored
gpio_keys.h uses 'bool' - type which is defined in linux/types.h. Include this header. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by:
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
- 04 Jul, 2018 7 commits
-
-
Sebastian Andrzej Siewior authored
iforce_get_id_packet() invokes wait_event_interruptible_timeout() which means it has to be in non-atomic context at that point, thus we can use GFP_KERNEL instead of GFP_ATOMIC. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Chen Zhong authored
This patch adds the device tree binding documentation for common keyboard. Acked-by:
Chen Zhong <chen.zhong@mediatek.com> Signed-off-by:
-
Colin Ian King authored
Variable num_cols is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable ‘num_cols’ set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Daniel Mack authored
Keep the documentation link up-to-date in case anybody need to dive into it again, and update email address while at it. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Daniel Mack authored
The only user of this driver in mainline does not make use of the module parameters, so let's remove them. All properties for this driver should be set through DT or pdata. Use touchscreen_parse_properties() to automatically set some of the common touchscreen properties and derive the axis inversion through that. And finally, use touchscreen_report_pos() to handle the DT properties automatically instead of doing the inversion ourselves. Signed-off-by:
-
Daniel Mack authored
Provide a match table so that the driver can be used in devicetree setups. More properties are added in a later patch. Signed-off-by:
-
Daniel Mack authored
Describe the bindings for EETI touchscreen controllers. Signed-off-by:
-
