Rather than writing all bits of SPU_ADV_REG on modeset, only write
what we need to change, and initialise the register in the variant
initialisation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Update debug to use KMS level, and print the mode using the standard
format for mode lines, but print the adjusted CRTC parameters as
that's what we will be programming for.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

For atomic modeset, we need to set the sync signal polarities from the
CRTC state structure rather than the legacy mode structure stored in
CRTC.  In any case, we should update this from our mode_set_nofb()
method, rather than the commit() method.  Move it there, and ensure
that armada_drm_crtc_update() will not overwrite these bits.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Push the interlaced frame calculation down into armada_drm_plane_calc()
which needs to apply the same correction for both the overlay and
primary planes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Provide the framebuffer pitches from armada_drm_plane_calc_addrs() as
well as the base addresses for each plane.  Since this is now about
more than just addresses, rename to armada_drm_plane_calc().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

armada_drm_plane_calc_addrs() gets all its information from the plane
state, so it makes sense to pass the plane state pointer down into this
function, rather than extracting the information in identical ways,
sometimes a couple of layers up.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Move the armada_drm_mode_config_funcs to armada_drv.c, since this now
has less to do with FBs than it does with general mode configuration.
In doing so, we need to make armada_fb_create() visible to armada_drv.c,
which reveals a function name clash with armada_fbdev.c.  Rename the
version in armada_fbdev.c.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Use the DRM standard plane properties for specifying the YUV
colour encoding parameter.  Our colour range is fixed at limited
range.

Since we are transitioning to atomic modeset, we need to explicitly
add handling of these properties to our atomic_set_property() method,
but once the transition is complete, these will be removed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Remove the unused CRTC colourspace properties - userspace does not make
use of these.  In any case, these are not a property of the CRTC, since
they demonstrably only affect the video (overlay) plane, irrespective
of the format of the graphics (primary) plane.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Move the overlay plane colorkey properties into the plane state,
keeping the existing driver behaviour to avoid breaking userspace.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Move the contrast, brightness, and saturation properties to the overlay
plane state structure, and call our overlay commit function to update
the hardware via the planes atomic_update() method.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Only overlay makes use of these now, so move these to the overlay code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Split out the primary plane support; this is now entirely separate from
the CRTC support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Rather than tracking the register state, we can now check the previous
state and decide which registers need updating from that since the old
plane state indicates the previous state which was programmed into the
hardware.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Now that we have the CRTC using the atomic modeset transitional helper,
there is no need to build a temporary crtc state anymore - we can use
the CRTC atomic state directly.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The overlay plane support updates asynchronously to the request, but the
drm_plane_helper_update() transitional helper waits for a vblank event
before releasing the framebuffer.  Using the transitional helper would
make the call block, which would introduce a performance regression.

Convert the overlay plane update to use the atomic state structures and
methods for the plane, but implement our own legacy update method
rather than the transitional helper.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

page_flip requests happen asynchronously, so we can't wait on the
vblank event before returning to userspace, as the transitional plane
update helper would do.  Craft our own implementation that keeps the
asynchronous behaviour of this request, while making use of the atomic
infrastructure for the primary plane update.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Convert the primary plane as a whole to use its atomic state and the
transitional helpers.  The CRTC is also switched to use the transitional
helpers for mode_set() and mode_set_base().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Reset the atomic state of any converted components during driver
initialisation to ensure that we have the atomic state initialised for
any component converted to atomic modeset.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

armada_drm_gra_plane_regs() is now only ever called from within
armada_drm_primary_update_state(), so merge it into this function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Use the core of the update_plane method to configure the primary plane
within mode_set() rather than duplicating this code.  This moves us
closer to the same code structure that the atomic modeset transitional
helpers will use.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Move the mode set vblank handling and controller enable/disable to the
prepare() and commit() callbacks.  This will be needed when we move to
mode_set_nofb() as we should not enable the controller without the
plane coordinates and location having been properly updated.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Add helpers to convert rectangle width/height and x/y to register
values.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drm_mode_page_flip_ioctl() already takes care of checking the
framebuffer format, and also assigns primary->fb after a successful
call to this handler.  These are both redundant, and can be removed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Use new return type vm_fault_t for fault handler in struct
vm_operations_struct. For now, this is just documenting that the
function returns a VM_FAULT value rather than an errno. Once all
instances are converted, vm_fault_t will become a distinct type.

commit 1c8f4220 ("mm: change return type to vm_fault_t")

Previously vm_insert_pfn() returns err which driver mapped into
VM_FAULT_* type. The new function vmf_insert_pfn() will replace this
inefficiency by returning VM_FAULT_* type.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

rmk requested this for armada and I think we've had a few
conflicts build up.
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is amdkfd pull for 4.19. The major changes are:

- Add Raven support. Raven refers to Ryzen APUs with integrated GFXv9 GPU.
- Integrate GPU reset support

In addition, there are a couple of small fixes and improvements, such as:

- Better handling and reporting to user of VM faults
- Fix race upon context restore
- Allow the user to use specific Compute Units
- Basic power management
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180728122306.GA5235@ogabbay-vm

Pull ext4 fixes from Ted Ts'o:
 "Some miscellaneous ext4 fixes for 4.18; one fix is for a regression
  introduced in 4.18-rc4.

  Sorry for the late-breaking pull. I was originally going to wait for
  the next merge window, but Eric Whitney found a regression introduced
  in 4.18-rc4, so I decided to push out the regression plus the other
  fixes now. (The other commits have been baking in linux-next since
  early July)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix check to prevent initializing reserved inodes
  ext4: check for allocation block validity with block group locked
  ext4: fix inline data updates with checksums enabled
  ext4: clear mmp sequence number when remounting read-only
  ext4: fix false negatives *and* false positives in ext4_check_descriptors()

Anatoly Trosinenko reports that a corrupted squashfs image can cause a
kernel oops.  It turns out that squashfs can end up being confused about
negative fragment lengths.

The regular squashfs_read_data() does check for negative lengths, but
squashfs_read_metadata() did not, and the fragment size code just
blindly trusted the on-disk value.  Fix both the fragment parsing and
the metadata reading code.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 8844618d: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set.  Unfortunately, this is not correct,
since a freshly created file system has this flag cleared.  It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:

   mkfs.ext4 /dev/vdc
   mount -o ro /dev/vdc /vdc
   mount -o remount,rw /dev/vdc

Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.

This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.

Fixes: 8844618d ("ext4: only look at the bg_flags field if it is valid")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Pull random fixes from Ted Ts'o:
 "In reaction to the fixes to address CVE-2018-1108, some Linux
  distributions that have certain systemd versions in some cases
  combined with patches to libcrypt for FIPS/FEDRAMP compliance, have
  led to boot-time stalls for some hardware.

  The reaction by some distros and Linux sysadmins has been to install
  packages that try to do complicated things with the CPU and hope that
  leads to randomness.

  To mitigate this, if RDRAND is available, mix it into entropy provided
  by userspace. It won't hurt, and it will probably help"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: mix rdrand with entropy sent in from userspace

Pull GPIO fixes from Linus Walleij:
 "Just a smallish OF fix and a driver fix:

   - OF flag fix for special regulator flags

   - fix up the Uniphier IRQ callback"

* tag 'gpio-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: uniphier: set legitimate irq trigger type in .to_irq hook
  gpio: of: Handle fixed regulator flags properly

Pull MIPS fix from Paul Burton:
 "Here's one more MIPS fix, reverting an errata workaround that was
  merged for v4.18-rc2 but has since been found to cause system hangs on
  some BCM4718A1-based systems by the OpenWRT project"

* tag 'mips_fixes_4.18_5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"

Pull i2c fixes from Wolfram Sang:
 "Some driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: use open drain for recovery GPIO
  i2c: rcar: handle RXDMA HW behaviour on Gen3
  i2c: imx: Fix reinit_completion() use
  i2c: davinci: Avoid zero value of CLKH

Pull block fixes from Jens Axboe:
 "Bigger than usual at this time, mostly due to the O_DIRECT corruption
  issue and the fact that I was on vacation last week. This contains:

   - NVMe pull request with two fixes for the FC code, and two target
     fixes (Christoph)

   - a DIF bio reset iteration fix (Greg Edwards)

   - two nbd reply and requeue fixes (Josef)

   - SCSI timeout fixup (Keith)

   - a small series that fixes an issue with bio_iov_iter_get_pages(),
     which ended up causing corruption for larger sized O_DIRECT writes
     that ended up racing with buffered writes (Martin Wilck)"

* tag 'for-linus-20180727' of git://git.kernel.dk/linux-block:
  block: reset bi_iter.bi_done after splitting bio
  block: bio_iov_iter_get_pages: pin more pages for multi-segment IOs
  blkdev: __blkdev_direct_IO_simple: fix leak in error case
  block: bio_iov_iter_get_pages: fix size of last iovec
  nvmet: only check for filebacking on -ENOTBLK
  nvmet: fixup crash on NULL device path
  scsi: set timed out out mq requests to complete
  blk-mq: export setting request completion state
  nvme: if_ready checks to fail io to deleting controller
  nvmet-fc: fix target sgl list on large transfers
  nbd: handle unexpected replies better
  nbd: don't requeue the same request twice.

Merge misc fixes from Andrew Morton:
 "11 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kvm, mm: account shadow page tables to kmemcg
  zswap: re-check zswap_is_full() after do zswap_shrink()
  include/linux/eventfd.h: include linux/errno.h
  mm: fix vma_is_anonymous() false-positives
  mm: use vma_init() to initialize VMAs on stack and data segments
  mm: introduce vma_init()
  mm: fix exports that inadvertently make put_page() EXPORT_SYMBOL_GPL
  ipc/sem.c: prevent queue.status tearing in semop
  mm: disallow mappings that conflict for devm_memremap_pages()
  kasan: only select SLUB_DEBUG with SYSFS=y
  delayacct: fix crash in delayacct_blkio_end() after delayacct init failure

Pull PCI fix from Bjorn Helgaas:
 "Fix a use-after-free error in fatal error recovery (Thomas Tai)"

* tag 'pci-v4.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()

Pull arm64 fixes from Will Deacon:
 "Inevitably, after saying that I hoped we would be done on the fixes
  front, a couple of issues have cropped up over the last week. Next
  time I'll stay schtum.

  We've fixed an over-eager BUILD_BUG_ON() which Arnd ran into with
  arndconfig, as well as ensuring that KPTI really is disabled on
  Thunder-X1, where the cure is worse than the disease (this regressed
  when we reworked the heterogeneous CPU feature checking).

  Summary:

   - Fix disabling of kpti on Thunder-X machines

   - Fix premature BUILD_BUG_ON() found with randconfig"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix vmemmap BUILD_BUG_ON() triggering on !vmemmap setups
  arm64: Check for errata before evaluating cpu features