- 06 Dec, 2020 1 commit
-
-
Takashi Iwai authored
The snd_seq_queue struct contains various flags in the bit fields. Those are categorized to two different use cases, both of which are protected by different spinlocks. That implies that there are still potential risks of the bad operations for bit fields by concurrent accesses. For addressing the problem, this patch rearranges those flags to be a standard bool instead of a bit field. Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 30 Nov, 2020 1 commit
-
-
Takashi Iwai authored
Yet another quirk for Pioneer DJ DDJ-SR2, which is quite similar like other DJ DDJ models but with slightly different EPs or channels. Reported-by:
Geraldo <geraldogabriel@gmail.com> Link: https://lore.kernel.org/r/20201130083714.10640-1-tiwai@suse.deSigned-off-by:
-
- 28 Nov, 2020 5 commits
-
-
Tom Rix authored
The macro use will already have a semicolon. Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201127192312.2861127-1-trix@redhat.comSigned-off-by:
-
Leonard Goehrs authored
The check for the FW_FEATURE_PS3_LV1 firmware feature is already performed in ps3_system_bus_init() before registering the driver. So if the probe function is actually used, this feature is already known to be available. The check for the match id is also superfluous; the condition is always true because the bus' match function (ps3_system_bus_match()) only considers this driver for devices having: dev->match_id == snd_ps3_bus_driver_info.match_id. Suggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Leonard Goehrs <l.goehrs@pengutronix.de> Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by:
Geoff Levand <geoff@infradead.org> Link: https://lore.kernel.org/r/20201127152259.1470079-1-l.goehrs@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The remove callback is only called for devices that were probed successfully before. As the matching probe function cannot complete without error if dev->match_id != PS3_MATCH_ID_SOUND, we don't have to check this here. Signed-off-by:
-
Daniel Martin authored
This patch allows the Pioneer DJ DDJ-RR to be seen as a USB audio device under Linux and therefore usable in such applications as Mixxx. Tested Master Audio out, headphones (both output jacks) and microphone input. All work perfectly. Signed-off-by:
Daniel Martin <dmanlfc@gmail.com> Link: https://lore.kernel.org/r/20201128084035.2958-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The setup of unsolicited event callbacks should be done only once at the parser phase, not in the init phase that is called multiple times at each resume. This patch moves the unsol setup code in ca0132 codec driver to the more appropriate place. Reported-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200930113008.9307-1-tiwai@suse.deSigned-off-by:
-
- 27 Nov, 2020 1 commit
-
-
Gyeongtaek Lee authored
With a stream with low bitrate, user can't pause or resume the stream near the end of the stream because current ALSA doesn't allow it. If the stream has very low bitrate enough to store whole stream into the buffer, user can't do anything except stop the stream and then restart it from the first because most of applications call draining after sending last frame to the kernel. If pause, resume are allowed during draining, user experience can be enhanced. To prevent malfunction in HW drivers which don't support pause during draining, pause during draining will only work if HW driver enable this feature explicitly by calling snd_compr_use_pause_in_draining(). Signed-off-by:
Gyeongtaek Lee <gt82.lee@samsung.com> Acked-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/000101d6c3f0$89b312b0$9d193810$@samsung.comSigned-off-by:
-
- 24 Nov, 2020 1 commit
-
-
Takashi Iwai authored
Pull the USB audio improvement Signed-off-by:
-
- 23 Nov, 2020 31 commits
-
-
Dylan Robinson authored
Now that the usb audio driver correctly finds implicit feedback endpoints, the implicit feedback quirk for the MOTU M-Series is no longer required. This also removes some unnecessary vendor specific messages from the MOTU M-Series boot quirk. The removed vendor specific messages turned on vendor specific interrupts to the host every 32 samples. The only thing the boot quirk needs to do is wait for 2 seconds. Tested-by:
Dylan Robinson <dylan_robinson@motu.com> Signed-off-by:
-
Takashi Iwai authored
A few other BOSS devices (BR-80, GT-100v2, Katana) seem requiring the same quirk as BOSS GT-001, i.e. no implicit feedback for playback but tying with capture. Add and correct the corresponding quirk table entries for them. Reported-and-tested-by:
Keith Milner <kamilner@superlative.org> Link: https://lore.kernel.org/r/20201123085347.19667-41-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
A new module option, implicit_fb, is added to specify the driver looking for the implicit feedback sync. This can be useful for a device that could be working better in the implicit feed back mode and user wants to test it quickly. When this works, we can add the quirk entry easily. Tested-by:
-
Takashi Iwai authored
This patch extends the implicit feedback mode parser code to check the description more generically, so that the quirk entries can be added without the explicit EP and interface numbers. The search is done for the next and the previous interface of the given altset, and if both entries are ASYNC mode and the direction matches, it just takes as the sync endpoint. The generic parser is applicable only for the playback stream. As of now, only a few M-Audio devices have been converted to use this mode. Tested-by:
-
Takashi Iwai authored
The code dealing with the implicit feedback mode grew recently, and it's becoming messy. As we receive more and more devices that need the similar handling, it's better to be processed through a table instead of the open code. This patch moves the code that is relevant with parsing the implicit feedback mode and some helpers into another file, implicit.c. The detection and the setup of the implicit feedback sync EPs are rewritten to use the ID/class matching table instead. There should be no functional changes. Tested-by:
-
Takashi Iwai authored
The capture stream of BOSS GT-001 seems always requiring to be tied with the playback stream. OTOH, the playback stream of this device doesn't seem working in the implicit fb mode, per se, since the playback must be running before the capture stream. This patch tries to address the points above: - Avoid the implicit fb mode for the playback - Set up a fake sync EP for the capture stream with the hard-coded playback stream using the implicit fb mode Reported-by:
-
Takashi Iwai authored
Now the sync endpoints have been parsed at the beginning and won't be changed dynamically, let's show them in the proc outputs for helping debugging. Tested-by:
-
Takashi Iwai authored
Just for consistency, use unsigned char for iface and altsetting in allover places. Also rearrange the field positions of snd_usb_endpiont and tidy up with some comments. Tested-by:
-
Takashi Iwai authored
Follow the inclusive terminology, just replace sync_master/sync_slave with sync_source/sync_sink. It's also a bit clearer from its meaning, too. Tested-by:
-
Takashi Iwai authored
There are multiple places in format.c performing the similar code for setting the rate_min, rate_max and rates fields. This patch unifies those in a helper function and calls it at the end of the parser phase so that all rate_table entries have been already determined. No functional changes, just a minor code refactoring. Tested-by:
-
Takashi Iwai authored
There are two places calculating the next packet size for the playback stream in the exactly same way. Provide the single helper for this purpose and use it from both places gracefully. Tested-by:
-
Takashi Iwai authored
Some fields like interface and alt_idx in snd_usb_substream are mostly useless now as they can be referred via either cur_audiofmt or data_endpoint assigned to the substream. Drop those, and also assure the concurrency about the access of cur_audiofmt field. Tested-by:
-
Takashi Iwai authored
Minor code refactoring to consolidate the URB deactivation code in endpoint.c. A slight behavior change is that the error handling in snd_usb_endpoint_start() leaves EP_FLAG_STOPPING now. This should be synced with the later PCM sync_stop callback. Tested-by:
-
Takashi Iwai authored
The endpoint objects may be started/stopped concurrently by different substreams in the case of implicit feedback mode, while the current code handles the reference counter without any protection. This patch changes the refcount to atomic_t for avoiding the inconsistency. We need no reference_t here as the refcount goes only up to 2. Also the name "use_count" is renamed to "running" since this is about actually the running status, not the open refcount. Tested-by:
-
Takashi Iwai authored
The audioformat is referred in many places but most of usages are read-only. Let's add const prefix in the possible places. Tested-by:
-
Takashi Iwai authored
The implicit feedback mode uses a ring buffer for storing the received packet sizes from the feedback source, and the code has a slight flaw; when a playback stream stalls by some reason and the URBs aren't processed, the next_packet FIFO might become empty, but the driver can't distinguish whether it's empty or full because it's managed with read_poss and write_pos. This patch addresses those by changing the next_packet array management. Instead of keeping read and write positions, now the head position and the queued amount are kept. It's easier to understand about the emptiness. Also, the URB active flag is now cleared before calling queue_pending_output_urbs() for avoiding (theoretically) possible inconsistency. Tested-by:
-
Takashi Iwai authored
This is an intensive surgery for the endpoint and stream management for achieving more robust and clean code. The goals of this patch are: - More clear endpoint resource changes - The interface altsetting control in a single place Below are brief description of the whole changes. First off, most of the endpoint operations are moved into endpoint.c, so that the snd_usb_endpoint object is only referred in other places. The endpoint object is acquired and released via the new functions snd_usb_endpoint_open() and snd_usb_endpoint_close() that are called at PCM hw_params and hw_free callbacks, respectively. Those are ref-counted and EPs can manage the multiple opens. The open callback receives the audioformat and hw_params arguments, and those are used for initializing the EP parameters; especially the endpoint, interface and altset numbers are read from there, as well as the PCM parameters like the format, rate and channels. Those are stored in snd_usb_endpoint object. If it's the secondary open, the function checks whether the given parameters are compatible with the already opened EP setup, too. The coupling with a sync EP (including an implicit feedback sync) is done by the sole snd_usb_endpoint_set_sync() call. The configuration of each endpoint is done in a single shot via snd_usb_endpoint_configure() call. This is the place where most of PCM configurations are done. A few flags and special handling in the snd_usb_substream are dropped along with this change. A significant difference wrt the configuration from the previous code is the order of USB host interface setups. Now the interface is always disabled at beginning and (re-)enabled at the last step of snd_usb_endpoint_configure(), in order to be compliant with the standard UAC2/3. For UAC1, the interface is set before the parameter setups since there seem devices that require it (e.g. Yamaha THR10), just like how it was done in the previous driver code. The start/stop are almost same as before, also single-shots. The URB callbacks need to be set via snd_usb_endpoint_set_callback() like the previous code at the trigger phase, too. Finally, the flag for the re-setup is set at the device suspend through the full EP list, instead of PCM trigger. This catches the overlooked cases where the PCM hasn't been running yet but the device needs the full setup after resume. Tested-by:
-
Takashi Iwai authored
The function to evaluate the match of the parameters with an EP assumes only the discrete rate tables and doesn't handle the continuous rates properly. This patch fixes match_endpoint_audioformats() to handle the continuous rates. Also the almost useless debug prints there are dropped. Tested-by:
-
Takashi Iwai authored
The commit 92adc96f ("ALSA: usb-audio: set the interface format after resume on Dell WD19") introduced the workaround for the broken setup after the resume specifically on a Dell dock model. However, the full setup should have been performed after the resume on all devices, as we can't guarantee the same state. So this patch removes the conditional check and applies the workaround always. Tested-by:
-
Takashi Iwai authored
The prepare_data_urb and retire_data_urb fields of the endpoint object are set dynamically at PCM trigger start/stop. Those are evaluated in the endpoint handler, but there can be a race, especially if two different PCM substreams are handling the same endpoint for the implicit feedback case. Also, the data_subs field of the endpoint is set and accessed dynamically, too, which has the same risk. As a slight improvement for the concurrency, this patch introduces the function to set the callbacks and the data in a shot with the memory barrier. In the reader side, it's also fetched with the memory barrier. There is still a room of race if prepare and retire callbacks are set during executing the URB completion. But such an inconsistency may happen only for the implicit fb source, i.e. it's only about the capture stream. And luckily, the capture stream never sets the prepare callback, hence the problem doesn't happen practically. Tested-by:
-
Takashi Iwai authored
start_endpoints() may leave the data endpoint running if an error happens at starting the sync endpoint. We should stop both streams properly, instead. While we're at it, move the debug prints into the endpoint.c that is a more suitable place. Tested-by:
-
Takashi Iwai authored
A preliminary change for the later big changes. This is a minor code refactoring to drop the unnecessary arguments that can be retrieved in a different way. Tested-by:
-
Takashi Iwai authored
A preliminary change for the later big changes. This is a minor code refactoring to drop the unnecessary arguments that can be retrieved in a different way. Tested-by:
-
Takashi Iwai authored
A preliminary patch for the later big change. Just a minor code refactoring. Tested-by:
-
Takashi Iwai authored
Setting the active altsetting at changing sample rate seems unrecommended. The host should deselect the altsetting at first before that, then select it again. Tested-by:
-
Takashi Iwai authored
Add a helper function to retrieve the usb_host_interface object from the given interface and altsetting number pair, which is a commonly used procedure in the driver code. No functional changes, just minor code refactoring. Tested-by:
-
Takashi Iwai authored
This behavior turned out to be invalid from the USB spec POV and shouldn't be applied. As it's an optional flag that is set only via an card control element that must be hardly used, let's drop it again. Tested-by:
-
Takashi Iwai authored
Currently snd_usb_endpoint objects are created at first when the substream is opened and tries to assign the endpoints corresponding to the matching audioformat. But since basically the all endpoints have been already parsed and the information have been obtained, we may create the endpoint objects statically at the init phase. It's easier to manage for the implicit fb case, for example. This patch changes the endpoint object management and lets the parser to create the all endpoint objects. This change shouldn't bring any functional changes. Tested-by:
-
Takashi Iwai authored
The implicit feedback mode initializes both the main data stream and the sync data stream. When a sync stream was already opened, this would result in the doubly initialization and might screw up things. Add the check of already opened sync streams and skip the unnecessary initialization. Tested-by:
-
Takashi Iwai authored
The file debug.h contains a simple macro for debug prints, and it's used only in two places, the format parser and the hw_params rules. The former actually should print a more informative message instead, so the only users are the hw_parmas rules. This patch moves the contents of debug.h into the hw_params rules local code and remove the unneeded includes. Also, the debug print in the format parser is replaced with the information print with more useful information, and the raw printk() call is replaced with pr_debug(). Tested-by:
-
Takashi Iwai authored
Several hw_params functions narrows the interval via min/max rule in the very similar way, so factor out those into a helper function and use commonly. No functional changes, just minor code refactoring. Tested-by:
-
