- 14 Sep, 2015 5 commits
-
-
Jiri Olsa authored
Making tracing_path__strerror_open_tp message generic by mentioning both debugfs/tracefs words in error message plus the tracing_path instead of debugfs_mountpoint. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1441180605-24737-7-git-send-email-jolsa@kernel.org [ Add comment for the ENOENT case out of this patch discussion thread ] Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jan Stancek authored
Signed-off-by:
Jan Stancek <jstancek@redhat.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/d0f42f786bc0e965918e0f422df25617a12a4021.1441181335.git.jstancek@redhat.comSigned-off-by:
-
Jan Stancek authored
objdump output can span across multiple sections: Disassembly of section .text: 0000000000000008 <crc32c+0x8>: 8: 48 89 e5 mov %rsp,%rbp b: 53 push %rbx c: 8b 01 mov (%rcx),%eax <snip> 6b: 90 nop Disassembly of section .init.text: 0000000000000008 <init_module+0x8>: 8: 00 00 add %al,(%rax) a: 00 00 add %al,(%rax) c: 48 89 e5 Stop further reading if an address starts going backwards, assuming we crossed sections. Signed-off-by: -
Jan Stancek authored
Add -z parameter to avoid skipping zero blocks: ffffffff816704fe <sysret_check+0x4b>: ffffffff816704fe: 7b 34 jnp ffffffff81670534 <sysret_signal+0x1c> ... ffffffff81670501 <sysret_careful>: ffffffff81670501: 0f ba e2 03 bt $0x3,%edx ffffffff81670505: 73 11 jae ffffffff81670518 <sysret_signal> Signed-off-by: -
Jan Stancek authored
objdump output can contain repeated bytes. At the moment test reads all output sequentially, assuming each address is represented in output only once: ffffffff8164efb3 <retint_swapgs+0x9>: ffffffff8164efb3: c1 5d 00 eb rcrl $0xeb,0x0(%rbp) ffffffff8164efb7: 00 4c 8b 5c add %cl,0x5c(%rbx,%rcx,4) ffffffff8164efb8 <restore_c_regs_and_iret>: ffffffff8164efb8: 4c 8b 5c 24 30 mov 0x30(%rsp),%r11 ffffffff8164efbd: 4c 8b 54 24 38 mov 0x38(%rsp),%r10 Store objdump output to buffer according to offset calculated from address on each line. Signed-off-by:
-
- 13 Sep, 2015 20 commits
-
-
Sukadev Bhattiprolu authored
We currently use PERF_EVENT_TXN flag to determine if we are in the middle of a transaction. If in a transaction, we defer the schedulability checks from pmu->add() operation to the pmu->commit() operation. Now that we have "transaction types" (PERF_PMU_TXN_ADD, PERF_PMU_TXN_READ) we can use the type to determine if we are in a transaction and drop the PERF_EVENT_TXN flag. When PERF_EVENT_TXN is dropped, the cpuhw->group_flag on some architectures becomes unused, so drop that field as well. This is an extension of the Powerpc patch from Peter Zijlstra to s390, Sparc and x86 architectures. Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1441336073-22750-11-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Sukadev Bhattiprolu authored
The 24x7 counters in Powerpc allow monitoring a large number of counters simultaneously. They also allow reading several counters in a single HCALL so we can get a more consistent snapshot of the system. Use the PMU's transaction interface to monitor and read several event counters at once. The idea is that users can group several 24x7 events into a single group of events. We use the following logic to submit the group of events to the PMU and read the values: pmu->start_txn() // Initialize before first event for each event in group pmu->read(event); // Queue each event to be read pmu->commit_txn() // Read/update all queuedcounters The ->commit_txn() also updates the event counts in the respective perf_event objects. The perf subsystem can then directly get the event counts from the perf_event and can avoid submitting a new ->read() request to the PMU. Thanks to input from Peter Zijlstra. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1441336073-22750-10-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by:
-
Sukadev Bhattiprolu authored
Define a new PERF_PMU_TXN_READ interface to read a group of counters at once. pmu->start_txn() // Initialize before first event for each event in group pmu->read(event); // Queue each event to be read rc = pmu->commit_txn() // Read/update all queued counters Note that we use this interface with all PMUs. PMUs that implement this interface use the ->read() operation to _queue_ the counters to be read and use ->commit_txn() to actually read all the queued counters at once. PMUs that don't implement PERF_PMU_TXN_READ ignore ->start_txn() and ->commit_txn() and continue to read counters one at a time. Thanks to input from Peter Zijlstra. Signed-off-by: -
Sukadev Bhattiprolu authored
When we implement the ability to read several counters at once (using the PERF_PMU_TXN_READ transaction interface), perf_event_read() can fail when the 'group' parameter is true (eg: trying to read too many events at once). For now, have perf_event_read() return an integer. Ignore the return value when the 'group' parameter is false. Signed-off-by:
-
Peter Zijlstra authored
In order to enable the use of perf_event_read(.group = true), we need to invert the sibling-child loop nesting of perf_read_group(). Currently we iterate the child list for each sibling, this precludes using group reads. Flip things around so we iterate each group for each child. Signed-off-by:
-
Peter Zijlstra authored
Enable perf_event_read() to update entire groups at once, this will be useful for read transactions. Signed-off-by:
-
Peter Zijlstra (Intel) authored
In order to free up the perf_event_read_group() name: s/perf_event_read_\(one\|group\)/perf_read_\1/g s/perf_read_hw/__perf_read/g Signed-off-by:
-
Sukadev Bhattiprolu authored
perf_event_read() does two things: - call the PMU to read/update the counter value, and - compute the total count of the event and its children Not all callers need both. perf_event_reset() for instance needs the first piece but doesn't need the second. Similarly, when we implement the ability to read a group of events using the transaction interface, we would need the two pieces done independently. Break up perf_event_read() and have it just read/update the counter and have the callers compute the total count if necessary. Signed-off-by:
-
Sukadev Bhattiprolu authored
Currently, the PMU interface allows reading only one counter at a time. But some PMUs like the 24x7 counters in Power, support reading several counters at once. To leveage this functionality, extend the transaction interface to support a "transaction type". The first type, PERF_PMU_TXN_ADD, refers to the existing transactions, i.e. used to _schedule_ all the events on the PMU as a group. A second transaction type, PERF_PMU_TXN_READ, will be used in a follow-on patch, by the 24x7 counters to read several counters at once. Extend the transaction interfaces to the PMU to accept a 'txn_flags' parameter and use this parameter to ignore any transactions that are not of type PERF_PMU_TXN_ADD. Thanks to Peter Zijlstra for his input. Signed-off-by:
-
Sukadev Bhattiprolu authored
In ->commit_txn() 'cpuc' is already initialized when it is declared, so we can remove the duplicate assignment. Signed-off-by:
-
Peter Zijlstra authored
Signed-off-by:
-
Huaitong Han authored
If KVM does not support INTEL_PT, guest MSR_IA32_RTIT_CTL reading will produce host warning like "kvm [2469]: vcpu0 unhandled rdmsr: 0x570". Guest can determine whether the CPU supports Intel_PT according to CPUID, so test_cpu_cap function is added before rdmsr,and it is more in line with the code style. Signed-off-by:
Huaitong Han <huaitong.han@intel.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Link: http://lkml.kernel.org/r/1441009262-9792-1-git-send-email-huaitong.han@intel.comSigned-off-by:
-
Kirill Tkhai authored
cgroup_exit() is not called from copy_process() after commit: e8604cb4 ("cgroup: fix spurious lockdep warning in cgroup_exit()") from do_exit(). So this check is useless and the comment is obsolete. Signed-off-by:
Kirill Tkhai <ktkhai@odin.com> Signed-off-by:
-
Kan Liang authored
This patch fixes an issue which introduced by commit 1a78d937 ("perf/x86/intel: Streamline LBR MSR handling in PMI"). The old patch not only avoids writing LBR_SELECT MSR in PMI, but also avoids updating lbr_select variable. So in PMI, FREEZE_LBRS_ON_PMI bit is always mistakenly set for IA32_DEBUGCTLMSR MSR, which causes superfluous increase/decrease of LBR_TOS when collecting LBR callstack. Reported-by:
Milian Wolff <mail@milianw.de> Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Alexander Shishkin authored
BTS leaks kernel addresses even in userspace-only mode due to imprecise IP sampling, so sometimes syscall entry points or page fault handler addresses end up in a userspace trace. Now, intel_bts driver exports trace data zero-copy, it does not scan through it to filter out the kernel addresses and it's would be a O(n) job. To work around this situation, this patch forbids the use of intel_bts driver by unprivileged users on systems with the paranoid setting above the (kernel's) default "1", which still allows kernel profiling. In other words, using intel_bts driver implies kernel tracing, regardless of the "exclude_kernel" attribute setting. Signed-off-by:
-
Alexander Shishkin authored
BTS leaks kernel addresses even in userspace-only mode due to imprecise IP sampling, so sometimes syscall entry points or page fault handler addresses end up in a userspace trace. Since this driver uses a relatively small buffer for BTS records and it has to iterate through them anyway, it can also take on the additional job of filtering out the records that contain kernel addresses when kernel space tracing is not enabled. This patch changes the bts code to skip the offending records from perf output. In order to request the exact amount of space on the ring buffer, we need to do an extra pass through the records to know how many there are of the valid ones, but considering the small size of the buffer, this extra pass adds very little overhead to the nmi handler. This way we won't end up with awkward IP samples with zero IPs in the perf stream. Signed-off-by:
-
Adrian Hunter authored
When TSC is stable perf/sched clock is based on it. However the conversion from cycles to nanoseconds is not as accurate as it could be. Because CYC2NS_SCALE_FACTOR is 10, the accuracy is +/- 1/2048 The change is to calculate the maximum shift that results in a multiplier that is still a 32-bit number. For example all frequencies over 1 GHz will have a shift of 32, making the accuracy of the conversion +/- 1/(2^33). That is achieved by using the 'clocks_calc_mult_shift()' function. Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
Ingo Molnar authored
Signed-off-by: -
Peter Zijlstra authored
Sasha reported that we can get here with .idx==-1, and cpuc->event_constraints unallocated. Suggested-by:
Stephane Eranian <eranian@google.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
- 12 Sep, 2015 13 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/crisLinus Torvalds authored
Pull CRIS updates from Jesper Nilsson: "Mostly removal of old cruft of which we can use a generic version, or fixes for code not commonly run in the cris port, but also additions to enable some good debug" * tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits) CRISv10: delete unused lib/dmacopy.c CRISv10: delete unused lib/old_checksum.c CRIS: fix switch_mm() lockdep splat CRISv32: enable LOCKDEP_SUPPORT CRIS: add STACKTRACE_SUPPORT CRISv32: annotate irq enable in idle loop CRISv32: add support for irqflags tracing CRIS: UAPI: use generic types.h CRIS: UAPI: use generic shmbuf.h CRIS: UAPI: use generic msgbuf.h CRIS: UAPI: use generic socket.h CRIS: UAPI: use generic sembuf.h CRIS: UAPI: use generic sockios.h CRIS: UAPI: use generic auxvec.h CRIS: UAPI: use generic headers via Kbuild CRIS: UAPI: fix elf.h export CRIS: don't make asm/elf.h depend on asm/user.h CRIS: UAPI: fix ptrace.h CRISv32: Squash compile warnings for axisflashmap CRISv32: Add GPIO driver to the default configs ...
-
Linus Torvalds authored
rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not a boolean value. Now, admittedly the "!= 0" doesn't really change the value (0 stays as zero, 1 stays as one), but it's not only redundant, it confuses gcc, and causes gcc to warn about the construct switch (rq_data_dir(req)) { case READ: ... case WRITE: ... that we have in a few drivers. Now, the gcc warning is silly and stupid (it seems to warn not about the switch value having a different type from the case statements, but about _any_ boolean switch value), but in this case the code itself is silly and stupid too, so let's just change it, and get rid of warnings like this: drivers/block/hd.c: In function ‘hd_request’: drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool] switch (rq_data_dir(req)) { The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in commit 5953316d ("block: make rq->cmd_flags be 64-bit") and is presumably because the old code (that just did a logical 'and' with 1) would then end up making the type of rq_data_dir() be u64 too. But if we want to retain the old regular integer type, let's just cast the result to 'int' rather than use that rather odd '!= 0'. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Fix up the writeback plugging introduced in commit d353d758 ("writeback: plug writeback at a high level") that then caused problems due to the unplug happening with a spinlock held. * writeback-plugging: writeback: plug writeback in wb_writeback() and writeback_inodes_wb() Revert "writeback: plug writeback at a high level"
-
Linus Torvalds authored
We had to revert the pluggin in writeback_sb_inodes() because the wb->list_lock is held, but we could easily plug at a higher level before taking that lock, and unplug after releasing it. This does that. Chris will run performance numbers, just to verify that this approach is comparable to the alternative (we could just drop and re-take the lock around the blk_finish_plug() rather than these two commits. I'd have preferred waiting for actual performance numbers before picking one approach over the other, but I don't want to release rc1 with the known "sleeping function called from invalid context" issue, so I'll pick this cleanup version for now. But if the numbers show that we really want to plug just at the writeback_sb_inodes() level, and we should just play ugly games with the spinlock, we'll switch to that. Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: -
Linus Torvalds authored
I didn't notice this when merging the thermal code from Zhang, but his merge (commit 5a924a07: "Merge branches 'thermal-core' and 'thermal-intel' of .git into next") of the thermal-core and thermal-intel branches was wrong. In thermal-core, commit 17e8351a ("thermal: consistently use int for temperatures") converted the thermal layer to use "int" for temperatures. But in parallel, in the thermal-intel branch commit d0a12625 ("thermal: Add Intel PCH thermal driver") added support for the intel PCH thermal sensor using the old interfaces that used "unsigned long" pointers. This resulted in warnings like this: drivers/thermal/intel_pch_thermal.c:184:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_temp = pch_thermal_get_temp, ^ drivers/thermal/intel_pch_thermal.c:184:14: note: (near initialization for ‘tzd_ops.get_temp’) drivers/thermal/intel_pch_thermal.c:186:19: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_trip_temp = pch_get_trip_temp, ^ drivers/thermal/intel_pch_thermal.c:186:19: note: (near initialization for ‘tzd_ops.get_trip_temp’) This fixes it. Signed-off-by:
-
Linus Torvalds authored
Merge fourth patch-bomb from Andrew Morton: - sys_membarier syscall - seq_file interface changes - a few misc fixups * emailed patches from Andrew Morton <akpm@linux-foundation.org>: revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each" mm/early_ioremap: add explicit #include of asm/early_ioremap.h fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void selftests: enhance membarrier syscall test selftests: add membarrier syscall test sys_membarrier(): system-wide memory barrier (generic, x86) MODSIGN: fix a compilation warning in extract-cert
-
Vineet Gupta authored
Newer bitfiles needs the reduced clk even for SMP builds Cc: <stable@vger.kernel.org> #4.2 Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason: "NTB bug and documentation fixes, new device IDs, performance improvements, and adding a mailing list to MAINTAINERS for NTB" * tag 'ntb-4.3' of git://github.com/jonmason/ntb: NTB: Fix range check on memory window index NTB: Improve index handling in B2B MW workaround NTB: Fix documentation for ntb_peer_db_clear. NTB: Fix documentation for ntb_link_is_up NTB: Use unique DMA channels for TX and RX NTB: Remove dma_sync_wait from ntb_async_rx NTB: Clean up QP stats info NTB: Make the transport list in order of discovery NTB: Add PCI Device IDs for Broadwell Xeon NTB: Add flow control to the ntb_netdev NTB: Add list to MAINTAINERS
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull more input updates from Dmitry Torokhov: "Second round of updates for the input subsystem. This introduces two brand new touchscreen drivers (Colibri and imx6ul_tsc), some small driver fixes, and we are no longer report errors from evdev_flush() as users do not really have a way of handling errors, error codes that we were returning were not on the list of errors supposed to be returned by close(), and errors were causing issues with one of older versions of systemd" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: imx_keypad - remove obsolete comment Input: touchscreen - add imx6ul_tsc driver support Input: Add touchscreen support for Colibri VF50 Input: i8042 - lower log level for "no controller" message Input: evdev - do not report errors form flush() Input: elants_i2c - extend the calibration timeout to 12 seconds Input: sparcspkr - fix module autoload for OF platform drivers Input: regulator-haptic - fix module autoload for OF platform driver Input: pwm-beeper - fix module autoload for OF platform driver Input: ab8500-ponkey - Fix module autoload for OF platform driver Input: cyttsp - remove unnecessary MODULE_ALIAS() Input: elan_i2c - add ACPI ID "ELAN1000"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups on top of the previous PM+ACPI pull request (cpufreq core and drivers, cpuidle, generic power domains framework). Some of them didn't make to that pull request and some fix issues introduced by it. The only really new thing is the support for suspend frequency in the cpufreq-dt driver, but it is needed to fix an issue with Exynos platforms. Specifics: - build fix for the new Mediatek MT8173 cpufreq driver (Guenter Roeck). - generic power domains framework fixes (power on error code path, subdomain removal) and cleanup of a deprecated API user (Geert Uytterhoeven, Jon Hunter, Ulf Hansson). - cpufreq-dt driver fixes including two fixes for bugs related to the new Operating Performance Points Device Tree bindings introduced recently (Viresh Kumar). - suspend frequency support for the cpufreq-dt driver (Bartlomiej Zolnierkiewicz, Viresh Kumar). - cpufreq core cleanups (Viresh Kumar). - intel_pstate driver fixes (Chen Yu, Kristen Carlson Accardi). - additional sanity check in the cpuidle core (Xunlei Pang). - fix for a comment related to CPU power management (Lina Iyer)" * tag 'pm+acpi-4.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_pstate: fix PCT_TO_HWP macro intel_pstate: Fix user input of min/max to legal policy region PM / OPP: Return suspend_opp only if it is enabled cpufreq-dt: add suspend frequency support cpufreq: allow cpufreq_generic_suspend() to work without suspend frequency PM / OPP: add dev_pm_opp_get_suspend_opp() helper staging: board: Migrate away from __pm_genpd_name_add_device() cpufreq: Use __func__ to print function's name cpufreq: staticize cpufreq_cpu_get_raw() PM / Domains: Ensure subdomain is not in use before removing cpufreq: Add ARM_MT8173_CPUFREQ dependency on THERMAL cpuidle/coupled: Add sanity check for safe_state_index PM / Domains: Try power off masters in error path of __pm_genpd_poweron() cpufreq: dt: Tolerance applies on both sides of target voltage cpufreq: dt: Print error on failing to mark OPPs as shared cpufreq: dt: Check OPP count before marking them shared kernel/cpu_pm: fix cpu_cluster_pm_exit comment -
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "Here are the outstanding target-pending updates for v4.3-rc1. Mostly bug-fixes and minor changes this round. The fallout from the big v4.2-rc1 RCU conversion have (thus far) been minimal. The highlights this round include: - Move sense handling routines into scsi_common code (Sagi) - Return ABORTED_COMMAND sense key for PI errors (Sagi) - Add tpg_enabled_sendtargets attribute for disabled iscsi-target discovery (David) - Shrink target struct se_cmd by rearranging fields (Roland) - Drop iSCSI use of mutex around max_cmd_sn increment (Roland) - Replace iSCSI __kernel_sockaddr_storage with sockaddr_storage (Andy + Chris) - Honor fabric max_data_sg_nents I/O transfer limit (Arun + Himanshu + nab) - Fix EXTENDED_COPY >= v4.1 regression OOPsen (Alex + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (37 commits) target: use stringify.h instead of own definition target/user: Fix UFLAG_UNKNOWN_OP handling target: Remove no-op conditional target/user: Remove unused variable target: Fix max_cmd_sn increment w/o cmdsn mutex regressions target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess target/qla2xxx: Honor max_data_sg_nents I/O transfer limit target/iscsi: Replace __kernel_sockaddr_storage with sockaddr_storage target/iscsi: Replace conn->login_ip with login_sockaddr target/iscsi: Keep local_ip as the actual sockaddr target/iscsi: Fix np_ip bracket issue by removing np_ip target: Drop iSCSI use of mutex around max_cmd_sn increment qla2xxx: Update tcm_qla2xxx module description to 24xx+ iscsi-target: Add tpg_enabled_sendtargets for disabled discovery drivers: target: Drop unlikely before IS_ERR(_OR_NULL) target: check DPO/FUA usage for COMPARE AND WRITE target: Shrink struct se_cmd by rearranging fields target: Remove cmd->se_ordered_id (unused except debug log lines) target: add support for START_STOP_UNIT SCSI opcode target: improve unsupported opcode message ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull second round of SCSI updates from James Bottomley: "There's one late arriving patch here (added today), fixing a build issue which the scsi_dh patch set in here uncovered. Other than that, everything has been incubated in -next and the checkers for a week. The major pieces of this patch are a set patches facilitating better integration between scsi and scsi_dh (the device handling layer used by multi-path; all the dm parts are acked by Mike Snitzer). This also includes driver updates for mp3sas, scsi_debug and an assortment of bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (50 commits) scsi_dh: fix randconfig build error scsi: fix scsi_error_handler vs. scsi_host_dev_release race fcoe: Convert use of __constant_htons to htons mpt2sas: setpci reset kernel oops fix pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY lpfc: Fix possible use-after-free and double free in lpfc_mbx_cmpl_rdp_page_a2() bfa: Fix incorrect de-reference of pointer bfa: Fix indentation scsi_transport_sas: Remove check for SAS expander when querying bay/enclosure IDs. scsi_debug: resp_request: remove unused variable scsi_debug: fix REPORT LUNS Well Known LU scsi_debug: schedule_resp fix input variable check scsi_debug: make dump_sector static scsi_debug: vfree is null safe so drop the check scsi_debug: use SCSI_W_LUN_REPORT_LUNS instead of SAM2_WLUN_REPORT_LUNS; scsi_debug: define pr_fmt() for consistent logging mpt2sas: Refcount fw_events and fix unsafe list usage mpt2sas: Refcount sas_device objects and fix unsafe list usage scsi_dh: return SCSI_DH_NOTCONN in scsi_dh_activate() scsi_dh: don't allow to detach device handlers at runtime ...
-
- 11 Sep, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: "A series of patches that move part of the code used to allocate memory from the media subsystem to the mm subsystem" [ The mm parts have been acked by VM people, and the series was apparently in -mm for a while - Linus ] * tag 'media/v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames() [media] media: vb2: Remove unused functions [media] media: vb2: Convert vb2_dc_get_userptr() to use frame vector [media] media: vb2: Convert vb2_vmalloc_get_userptr() to use frame vector [media] media: vb2: Convert vb2_dma_sg_get_userptr() to use frame vector [media] vb2: Provide helpers for mapping virtual addresses [media] media: omap_vout: Convert omap_vout_uservirt_to_phys() to use get_vaddr_pfns() [media] mm: Provide new get_vaddr_frames() helper [media] vb2: Push mmap_sem down to memops
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edacLinus Torvalds authored
Pull edac updates from Mauro Carvalho Chehab: "Two EDAC fixes for Intel systems (Haswell and Ivy Bridge)" * tag 'edac/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: correctly fetch DIMM width on Ivy Bridge and Haswell sb_edac: look harder for DDRIO on Haswell systems
-
