The normal read_seqcount_begin() function will wait for any current
writers to exit their critical region by looping until the sequence
count is even.

That "wait for sequence count to stabilize" is the right thing to do if
the read-locker will just retry the whole operation on contention: no
point in doing a potentially expensive reader sequence if we know at the
beginning that we'll just end up re-doing it all.

HOWEVER.  Some users don't actually retry the operation, but instead
will abort and do the operation with proper locking.  So the sequence
count case may be the optimistic quick case, but in the presense of
writers you may want to do full locking in order to guarantee forward
progress.  The prime example of this would be the RCU name lookup.

And in that case, you may well be better off without the "retry early",
and are in a rush to instead get to the failure handling.  Thus this
"raw" interface that just returns the sequence number without testing it
- it just forces the low bit to zero so that read_seqcount_retry() will
always fail such a "active concurrent writer" scenario.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We really need to use a ACCESS_ONCE() on the sequence value read in
__read_seqcount_begin(), because otherwise the compiler might end up
reloading the value in between the test and the return of it.  As a
result, it might end up returning an odd value (which means that a write
is in progress).

If the reader is then fast enough that that odd value is still the
current one when the read_seqcount_retry() is done, we might end up with
a "successful" read sequence, even despite the concurrent write being
active.

In practice this probably never really happens - there just isn't
anything else going on around the read of the sequence count, and the
common case is that we end up having a read barrier immediately
afterwards.

So the code sequence in which gcc might decide to reaload from memory is
small, and there's no reason to believe it would ever actually do the
reload.  But if the compiler ever were to decide to do so, it would be
incredibly annoying to debug.  Let's just make sure.

Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "Some minor fixes from Intel and a radeon fix.

  I have the nouveau fix for the i2c regression queued for next week,
  its mostly a revert and seems to work on the system it was originally
  introduced for thanks to some i2c core changes."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: clarify and extend wb setup on APUs and NI+ asics
  drm/i915: enable dip before writing data on gen4
  fixing dmi match for hp t5745 and hp st5747 thin client
  drm/i915: Only enable IPS polling for gen5
  drm/i915: Do not read non-existent DPLL registers on PCH hardware

Pull one small fix for md/bitmaps from NeilBrown:
 "This fixes a regression that was introduced in the merge window."

* tag 'md-3.4-fixes' of git://neil.brown.name/md:
  md/bitmap: fix calculation of 'chunks' - missing shift.

Jana Saout confirmed that this fixes the page faults he saw.

His problem was triggered by ocfs2 and autofs symlink lookups, where the
symlink allocation was at the end of a page.  But the deeper reason
seems to be the use of Xen-PV, which is what then causes him to have all
these unmapped pages, which is what then makes it a problem when the
unaligned word-at-a-time code fetches data past the end of a page.

* fix-unmapped-word-at-a-time:
  vfs: make word-at-a-time accesses handle a non-existing page

Use family rather than DCE check for clarity, also always use
wb on APUs, there will never be AGP variants.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

commit 61a0d80c "md/bitmap: discard CHUNK_BLOCK_SHIFT macro"
replaced CHUNK_BLOCK_RATIO() by the same text that was
replacing CHUNK_BLOCK_SHIFT() - which is clearly wrong.

The result is that 'chunks' is often too small by 1,
which can sometimes result in a crash (not sure how).

So use the correct replacement, and get rid of CHUNK_BLOCK_RATIO
which is no longe used.
Reported-by: Karl Newman <siliconfiend@gmail.com>
Tested-by: Karl Newman <siliconfiend@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>

Pull second set of MFD fixes from Samuel Ortiz:
 "This time we only have a one liner fixing an omap-usb build error."

* tag 'mfd-for-linus-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Fix build breakage in omap-usb-host.c

* efi-vars:
  efivars: Improve variable validation

Ben Hutchings pointed out that the validation in efivars was inadequate -
most obviously, an entry with size 0 would server as a DoS against the
kernel. Improve this based on his suggestions.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull libata fixes from Jeff Garzik:

1) Fix regression that could cause a misdiagnosis, which in turn could
   lead to an erroneous 3.0 Gbps -> 1.5 downshift, particularly when hotplug
   and suspend/resume is involved.

2) Fix a regression that led to ata%d controller ids being numbered one
   larger than in <= 3.4-rc3 (oh, the horror!).  Controller ids should now be
   as expected.

3) add some DT, PCI id's

4) ata/pata_arasan_cf: minor cpp fixing/cleaning

* tag 'tag/upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata: ahci_platform: Add synopsys ahci controller in DT's compatible list
  ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
  libata: init ata_print_id to 0
  ahci: Detect Marvell 88SE9172 SATA controller
  libata: skip old error history when counting probe trials

Pull i2c embedded fixes from Wolfram Sang:
 "Here are some typical i2c driver bugfixes for 3.4.  Missed clock
  handling, improper timeout fixes, hardware wrokarounds...  All
  patches have been in linux-next for a few days, too."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: mxs: disable QUEUE when sending is done
  i2c: mxs: handle spurious interrupt
  i2c-eg20t: Modify MODULE_AUTHOR's email address
  i2c-eg20t: change timeout value 50msec to 1000msec
  i2c: tegra: Add delay before resetting the controller after NACK
  i2c: pnx: Disable clk in suspend

Pull drm fixes from Dave Airlie:
 "Just some regression fixes from Ben along with a variable that gcc
  failed to spot is uninitialised."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  nouveau: initialise has_optimus variable.
  drm/nv10/gpio: fix thinko in mask for gpio lines 2-9
  nvc0/fb: shut up PMFB interrupt after the first occurrence
  drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvac
  drm/nouveau/bios: fix regression on some nv4x board

Pull networking fixes from David Miller:

 1) Transfer padding was wrong for full-speed USB in ASIX driver, fix
    from Ingo van Lil.

 2) Propagate the negative packet offset fix into the PowerPC BPF JIT.
    From Jan Seiffert.

 3) dl2k driver's private ioctls were letting unprivileged tasks make
    MII writes and other ugly bits like that.  Fix from Jeff Mahoney.

 4) Fix TX VLAN and RX packet drops in ucc_geth, from Joakim Tjernlund.

 5) OOPS and network namespace fixes in IPVS from Hans Schillstrom and
    Julian Anastasov.

 6) Fix races and sleeping in locked context bugs in drop_monitor, from
    Neil Horman.

 7) Fix link status indication in smsc95xx driver, from Paolo Pisati.

 8) Fix bridge netfilter OOPS, from Peter Huang.

 9) L2TP sendmsg can return on error conditions with the socket lock
    held, oops.  Fix from Sasha Levin.

10) udp_diag should return meaningful values for socket memory usage,
    from Shan Wei.

11) Eric Dumazet is so awesome he gets his own section:

       Socket memory cgroup code (I never should have applied those
       patches, grumble...) made erroneous changes to
       sk_sockets_allocated_read_positive().  It was changed to
       use percpu_counter_sum_positive (which requires BH disabling)
       instead of percpu_counter_read_positive (which does not).
       Revert back to avoid crashes and lockdep warnings.

       Adjust the default tcp_adv_win_scale and tcp_rmem[2] values
       to fix throughput regressions.  This is necessary as a result
       of our more precise skb->truesize tracking.

       Fix SKB leak in netem packet scheduler.

12) New device IDs for various bluetooth devices, from Manoj Iyer,
    AceLan Kao, and Steven Harms.

13) Fix command completion race in ipw2200, from Stanislav Yakovlev.

14) Fix rtlwifi oops on unload, from Larry Finger.

15) Fix hard_mtu when adjusting hard_header_len in smsc95xx driver.
    From Stephane Fillod.

16) ehea driver registers it's IRQ before all the necessary state is
    setup, resulting in crashes.  Fix from Thadeu Lima de Souza
    Cascardo.

17) Fix PHY connection failures in davinci_emac driver, from Anatolij
    Gustschin.

18) Missing break; in switch statement in bluetooth's
    hci_cmd_complete_evt().  Fix from Szymon Janc.

19) Fix queue programming in iwlwifi, from Johannes Berg.

20) Interrupt throttling defaults not being actually programmed into the
    hardware, fix from Jeff Kirsher and Ying Cai.

21) TLAN driver SKB encoding in descriptor busted on 64-bit, fix from
    Benjamin Poirier.

22) Fix blind status block RX producer pointer deref in TG3 driver, from
    Matt Carlson.

23) Promisc and multicast are busted on ehea, fixes from Thadeu Lima de
    Souza Cascardo.

24) Fix crashes in 6lowpan, from Alexander Smirnov.

25) tcp_complete_cwr() needs to be careful to not rewind the CWND to
    ssthresh if ssthresh has the "infinite" value.  Fix from Yuchung
    Cheng.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  sungem: Fix WakeOnLan
  tcp: change tcp_adv_win_scale and tcp_rmem[2]
  net: l2tp: unlock socket lock before returning from l2tp_ip_sendmsg
  drop_monitor: prevent init path from scheduling on the wrong cpu
  usbnet: fix failure handling in usbnet_probe
  usbnet: fix leak of transfer buffer of dev->interrupt
  ucc_geth: Add 16 bytes to max TX frame for VLANs
  net: ucc_geth, increase no. of HW RX descriptors
  netem: fix possible skb leak
  sky2: fix receive length error in mixed non-VLAN/VLAN traffic
  sky2: propogate rx hash when packet is copied
  net: fix two typos in skbuff.h
  cxgb3: Don't call cxgb_vlan_mode until q locks are initialized
  ixgbe: fix calling skb_put on nonlinear skb assertion bug
  ixgbe: Fix a memory leak in IEEE DCB
  igbvf: fix the bug when initializing the igbvf
  smsc75xx: enable mac to detect speed/duplex from phy
  smsc75xx: declare smsc75xx's MII as GMII capable
  smsc75xx: fix phy interrupt acknowledge
  smsc75xx: fix phy init reset loop
  ...

Pull hwmon fixes from Guenter Roeck:
 "Fix OOPS seen in coretemp driver if the CPU core ID is too large"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (coretemp) Increase CPU core limit
  hwmon: (coretemp) fix oops on cpu unplug

It turns out that there are more cases than CONFIG_DEBUG_PAGEALLOC that
can have holes in the kernel address space: it seems to happen easily
with Xen, and it looks like the AMD gart64 code will also punch holes
dynamically.

Actually hitting that case is still very unlikely, so just do the
access, and take an exception and fix it up for the very unlikely case
of it being a page-crosser with no next page.

And hey, this abstraction might even help other architectures that have
other issues with unaligned word accesses than the possible missing next
page.  IOW, this could do the byte order magic too.

Peter Anvin fixed a thinko in the shifting for the exception case.
Reported-and-tested-by: Jana Saout <jana@saout.de>
Cc:  Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares
ahci_platform driver with other controller versions.

This patch updates DT compatible list for ahci_platform. It also updates and
renames binding documentation to more generic name.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

#ifdef, #endif is not required in definition/usage of arasan_cf_pm_ops. So, move
this definition and its usage outside of them.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

When comparing the dmesg between 3.4-rc3 and 3.4-rc4 I found the
following differences:

 -ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47
 -ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47
 -ata3: DUMMY
 +ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47
 +ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47
  ata4: DUMMY
  ata5: DUMMY
 -ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47
 +ata6: DUMMY
 +ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47

The change of numbering comes from commit 85d6725b ("libata:
make ata_print_id atomic") that changed lines like

	ap->print_id = ata_print_id++;
		to
	ap->print_id = atomic_inc_return(&ata_print_id);

As the latter behaves like ++ata_print_id, we must initialize
it to zero to start the numbering from one.
Signed-off-by: Tero Roponen <tero.roponen@gmail.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The Marvell 88SE9172 SATA controller (PCI ID 1b4b 917a) already worked
once it was detected, but was missing an ahci_pci_tbl entry.

Boot tested on a Gigabyte Z68X-UD3H-B3 motherboard.
Signed-off-by: Matt Johnson <johnso87@illinois.edu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Commit d9027470("[libata] Add ATA transport class") introduced
ATA_EFLAG_OLD_ER to mark entries in the error ring as cleared.

But ata_count_probe_trials_cb() didn't check this flag and it still
counts the old error history. So wrong probe trials count is returned
and it causes problem, for example, SATA link speed is slowed down from
3.0Gbps to 1.5Gbps.

Fix it by checking ATA_EFLAG_OLD_ER in ata_count_probe_trials_cb().

Cc: stable <stable@vger.kernel.org> # 2.6.37+
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: enable dip before writing data on gen4
  fixing dmi match for hp t5745 and hp st5747 thin client
  drm/i915: Only enable IPS polling for gen5
  drm/i915: Do not read non-existent DPLL registers on PCH hardware

While testing with the intel_infoframes tool on gen4, I see that when
video DIP is disabled, what we write to the DATA memory is not exactly
what we read back later.

This regression has been introduce in

commit 64a8fc01
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Sep 22 11:16:00 2011 +0530

    drm/i915: fix ILK+ infoframe support

That commit was setting VIDEO_DIP_CTL to 0 when initializing, which
caused the problem.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43947
Cc: stable@kernel.org
Tested-by: Yang Guang <guang.a.yang@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: Pimped commit message by using the usual commit citation
layout.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We should initialise this to 0 really to avoid getting false positives.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

WakeOnLan was broken in this driver because gp->asleep_wol is a 1-bit
bitfield and it was being assigned WAKE_MAGIC, which is (1 << 5).
gp->asleep_wol remains 0 and the machine never wakes up.  Fixed by casting
gp->wake_on_lan to bool.  Tested on an iBook G4.
Signed-off-by: Gerard Lledo <gerard.lledo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_adv_win_scale default value is 2, meaning we expect a good citizen
skb to have skb->len / skb->truesize ratio of 75% (3/4)

In 2.6 kernels we (mis)accounted for typical MSS=1460 frame :
1536 + 64 + 256 = 1856 'estimated truesize', and 1856 * 3/4 = 1392.
So these skbs were considered as not bloated.

With recent truesize fixes, a typical MSS=1460 frame truesize is now the
more precise :
2048 + 256 = 2304. But 2304 * 3/4 = 1728.
So these skb are not good citizen anymore, because 1460 < 1728

(GRO can escape this problem because it build skbs with a too low
truesize.)

This also means tcp advertises a too optimistic window for a given
allocated rcvspace : When receiving frames, sk_rmem_alloc can hit
sk_rcvbuf limit and we call tcp_prune_queue()/tcp_collapse() too often,
especially when application is slow to drain its receive queue or in
case of losses (netperf is fast, scp is slow). This is a major latency
source.

We should adjust the len/truesize ratio to 50% instead of 75%

This patch :

1) changes tcp_adv_win_scale default to 1 instead of 2

2) increase tcp_rmem[2] limit from 4MB to 6MB to take into account
better truesize tracking and to allow autotuning tcp receive window to
reach same value than before. Note that same amount of kernel memory is
consumed compared to 2.6 kernels.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_ip_sendmsg could return without releasing socket lock, making it all the
way to userspace, and generating the following warning:

[  130.891594] ================================================
[  130.894569] [ BUG: lock held when returning to user space! ]
[  130.897257] 3.4.0-rc5-next-20120501-sasha #104 Tainted: G        W
[  130.900336] ------------------------------------------------
[  130.902996] trinity/8384 is leaving the kernel with locks still held!
[  130.906106] 1 lock held by trinity/8384:
[  130.907924]  #0:  (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff82b9503f>] l2tp_ip_sendmsg+0x2f/0x550

Introduced by commit 2f16270f ("l2tp: Fix locking in l2tp_ip.c").
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I just noticed after some recent updates, that the init path for the drop
monitor protocol has a minor error.  drop monitor maintains a per cpu structure,
that gets initalized from a single cpu.  Normally this is fine, as the protocol
isn't in use yet, but I recently made a change that causes a failed skb
allocation to reschedule itself .  Given the current code, the implication is
that this workqueue reschedule will take place on the wrong cpu.  If drop
monitor is used early during the boot process, its possible that two cpus will
access a single per-cpu structure in parallel, possibly leading to data
corruption.

This patch fixes the situation, by storing the cpu number that a given instance
of this per-cpu data should be accessed from.  In the case of a need for a
reschedule, the cpu stored in the struct is assigned the rescheule, rather than
the currently executing cpu

Tested successfully by myself.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

If register_netdev returns failure, the dev->interrupt and
its transfer buffer should be released, so just fix it.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The transfer buffer of dev->interrupt is allocated in .probe path,
but not freed in .disconnet path, so mark the interrupt URB as
URB_FREE_BUFFER to free the buffer when the URB is destroyed.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Creating a VLAN interface on top of ucc_geth adds 4 bytes
to the frame and the HW controller is not prepared to
TX a frame bigger than 1518 bytes which is 4 bytes too
small for a full VLAN frame. Add 16 bytes which will handle
the a simple VLAN and leaves 12 bytes for future expansion.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a busy network we see ucc_geth is dropping RX pkgs every now
and then. Increase the RX queues HW descriptors from
16 to 32 to deal with this.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull USB patches from Greg Kroah-Hartman:
 "Here are two EHCI Tegra driver patches for your tree.

  The first is a bit big, but the majority is just moving code around.
  It is needed due to the other EHCI core changes that went in way back
  in 3.4-rc1, so this driver will now properly handle suspend/resume, as
  it was broken.  The other one is a minor bugfix that resolves an
  warning that people have been seeing."

* tag 'usb-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: ehci-tegra: remove redundant gpio_set_value
  EHCI: update PM methods in ehci-tegra.c

Pull a TTY fix from Greg Kroah-Hartman:
 "This is a deadlock bugfix that was easy to hit, and that the vt layer
  lock rework got wrong, so it reverts the logic back to the way it was
  in 3.3 and earlier kernels to prevent problems."

* tag 'tty-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Fix deadlock on scroll-lock

Match the correct information which is DMI_PRODUCT_NAME instead of DMI_BOARD_NAME
See dmidecode information on launchpad for both thin client:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/911920
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/911916Signed-off-by: Marc Gariepy <mgariepy@ubuntu.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Pull NFS client bugfixes from Trond Myklebust:
 - Fixes for the NFSv4 security negotiation
 - Use the correct hostname when mounting from a private namespace
 - NFS net namespace bugfixes for the pipefs filesystem
 - NFSv4 GETACL bugfixes
 - IPv6 bugfix for NFSv4 referrals

* tag 'nfs-for-3.4-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4.1: Use the correct hostname in the client identifier string
  SUNRPC: RPC client must use the current utsname hostname string
  NFS: get module in idmap PipeFS notifier callback
  NFS: Remove unused function nfs_lookup_with_sec()
  NFS: Honor the authflavor set in the clone mount data
  NFS: Fix following referral mount points with different security
  NFS: Do secinfo as part of lookup
  NFS: Handle exceptions coming out of nfs4_proc_fs_locations()
  NFS: Fix SECINFO_NO_NAME
  SUNRPC: traverse clients tree on PipeFS event
  SUNRPC: set per-net PipeFS superblock before notification
  SUNRPC: skip clients with program without PipeFS entries
  SUNRPC: skip dead but not buried clients on PipeFS events
  Avoid beyond bounds copy while caching ACL
  Avoid reading past buffer when calling GETACL
  fix page number calculation bug for block layout decode buffer
  NFSv4.1 fix page number calculation bug for filelayout decode buffers
  pnfs-obj: Remove unused variable from objlayout_get_deviceinfo()
  nfs4: fix referrals on mounts that use IPv6 addrs

On SandyBridge IPS was entirely implemented in hardware and not reliant
on the driver monitoring power consumption and feeding back desired run
states, so the hardware is able to adapt quicker and more flexibly. Which
is a huge relief for us as we no longer have to carry empirically
derived magic algorithms.

Yet despite the advance in technology, the driver was still doing its
IPS polling on all machines. Restrict it to the only supported hardware,
Clarkdale/Arrandale.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Andrey Rahmatullin <wrar@wrar.name>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49025Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We only execute intel_decrease_pllclock for pre-PCH hardware, typically
gen4 mobiles. However, in the variable declaration we did read from the
non-PCH DPLL register, quite naughty and detected by SandyBridge.
Reported-and-tested-by: Andrey Rahmatullin <wrar@wrar.name>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49025Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Pull two bug fixes in ktest from Steven Rostedt.

* tag 'ktest-for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix reboot on success stopping all reboots
  ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP

Pull MIPS fixes from Ralf Baechle:
 "misc fixes some of which are also applicable to 3.3 and removal of an
  unused function.  This has been sitting in -next for ages with no
  complaints.  Also there are no known regressions due to these patches"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Remove get_current_pgd().
  MIPS: ath79: fix AR933X WMAC reset code
  MIPS: JZ4740: Fix the JZ4740_IRQ_DMA macro
  MIPS: Use set_current_blocked() and block_sigmask()