- 27 Jan, 2023 2 commits
-
-
Tom Lendacky authored
Add a new MODULE_FIRMWARE() entry for 4th generation EPYC processors. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tom Lendacky authored
Add comments next to the version data MMIO register values to identify the register name being used. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 20 Jan, 2023 14 commits
-
-
Taehee Yoo authored
The minimum version of binutils for kernel build is currently 2.23 and it doesn't support GFNI. So, it fails to build the aria-avx512 if the old binutils is used. aria-avx512 requires GFNI, so it should not be allowed to build if the old binutils is used. The AS_AVX512 and AS_GFNI are added to the Kconfig to disable build aria-avx512 if the old binutils is used. Fixes: c970d420 ("crypto: x86/aria - implement aria-avx512") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Taehee Yoo authored
The minimum version of binutils for kernel build is currently 2.23 and it doesn't support GFNI. So, it fails to build the aria-avx2 if the old binutils is used. The code using GFNI is an optional part of aria-avx2. So, it disables GFNI part in it when the old binutils is used. Fixes: 37d8d3ae ("crypto: x86/aria - implement aria-avx2") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Taehee Yoo authored
The minimum version of binutils for kernel build is currently 2.23 and it doesn't support GFNI. So, it fails to build the aria-avx if the old binutils is used. The code using GFNI is an optional part of aria-avx. So, it disables GFNI part in it when the old binutils is used. In order to check whether the using binutils is supporting GFNI or not, AS_GFNI is added. Fixes: ba3579e6 ("crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
As it is seqiv only handles the special return value of EINPROGERSS, which means that in all other cases it will free data related to the request. However, as the caller of seqiv may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free. Fixes: 0a270321 ("[CRYPTO] seqiv: Add Sequence Number IV Generator") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
As it is essiv only handles the special return value of EINPROGERSS, which means that in all other cases it will free data related to the request. However, as the caller of essiv may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free. Fixes: be1eb7f7 ("crypto: essiv - create wrapper template...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Lukas Bulwahn authored
Defines prefixed with "CONFIG" should be limited to proper Kconfig options, that are introduced in a Kconfig file. Here, a definition for the driver's configuration zone is named CONFIG_ZONE. Rename this local definition to CONFIGURATION_ZONE to avoid defines prefixed with "CONFIG". No functional change. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Meadhbh Fitzpatrick authored
Fix spelling mistakes from 'bufer' to 'buffer' in qat_common. Also fix indentation issue caused by the spelling change. Signed-off-by: Meadhbh Fitzpatrick <meadhbh.fitzpatrick@intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Lukas Bulwahn authored
While reviewing dependencies in some Kconfig files, I noticed the redundant dependency "depends on PCI && PCI_MSI". The config PCI_MSI has always, since its introduction, been dependent on the config PCI. So, it is sufficient to just depend on PCI_MSI, and know that the dependency on PCI is implicitly implied. Reduce the dependencies of configs CRYPTO_DEV_HISI_SEC2, CRYPTO_DEV_HISI_QM, CRYPTO_DEV_HISI_ZIP and CRYPTO_DEV_HISI_HPRE. No functional change and effective change of Kconfig dependendencies. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Linus Walleij authored
When reading or writing crypto buffers the inner loops can be replaced with readsl and writesl which will on ARM result in a tight assembly loop, speeding up encryption/decryption a little bit. This optimization was in the Ux500 driver so let's carry it over to the STM32 driver. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Lionel Debieve <lionel.debieve@foss.st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Gustavo A. R. Silva authored
Zero-length arrays are deprecated[1] and we are moving towards adopting C99 flexible-array members instead. So, replace zero-length array declaration in struct aspeed_sham_ctx with flex-array member. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [2]. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays [1] Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2] Link: https://github.com/KSPP/linux/issues/78Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Neal Liu <neal_liu@aspeedtech.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Koba Ko authored
The following warning appears during the CCP module re-initialization: [ 140.965403] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:07.1/0000:03:00.2/dma/dma0chan0' [ 140.975736] CPU: 0 PID: 388 Comm: kworker/0:2 Kdump: loaded Not tainted 6.2.0-0.rc2.18.eln124.x86_64 #1 [ 140.985185] Hardware name: HPE ProLiant DL325 Gen10/ProLiant DL325 Gen10, BIOS A41 07/17/2020 [ 140.993761] Workqueue: events work_for_cpu_fn [ 140.998151] Call Trace: [ 141.000613] <TASK> [ 141.002726] dump_stack_lvl+0x33/0x46 [ 141.006415] sysfs_warn_dup.cold+0x17/0x23 [ 141.010542] sysfs_create_dir_ns+0xba/0xd0 [ 141.014670] kobject_add_internal+0xba/0x260 [ 141.018970] kobject_add+0x81/0xb0 [ 141.022395] device_add+0xdc/0x7e0 [ 141.025822] ? complete_all+0x20/0x90 [ 141.029510] __dma_async_device_channel_register+0xc9/0x130 [ 141.035119] dma_async_device_register+0x19e/0x3b0 [ 141.039943] ccp_dmaengine_register+0x334/0x3f0 [ccp] [ 141.045042] ccp5_init+0x662/0x6a0 [ccp] [ 141.049000] ? devm_kmalloc+0x40/0xd0 [ 141.052688] ccp_dev_init+0xbb/0xf0 [ccp] [ 141.056732] ? __pci_set_master+0x56/0xd0 [ 141.060768] sp_init+0x70/0x90 [ccp] [ 141.064377] sp_pci_probe+0x186/0x1b0 [ccp] [ 141.068596] local_pci_probe+0x41/0x80 [ 141.072374] work_for_cpu_fn+0x16/0x20 [ 141.076145] process_one_work+0x1c8/0x380 [ 141.080181] worker_thread+0x1ab/0x380 [ 141.083953] ? __pfx_worker_thread+0x10/0x10 [ 141.088250] kthread+0xda/0x100 [ 141.091413] ? __pfx_kthread+0x10/0x10 [ 141.095185] ret_from_fork+0x2c/0x50 [ 141.098788] </TASK> [ 141.100996] kobject_add_internal failed for dma0chan0 with -EEXIST, don't try to register things with the same name in the same directory. [ 141.113703] ccp 0000:03:00.2: ccp initialization failed The /dma/dma0chan0 sysfs file is not removed since dma_chan object has been released in ccp_dma_release() before releasing dma device. A correct procedure would be: release dma channels first => unregister dma device => release ccp dma object. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216888 Fixes: 68dbe80f ("crypto: ccp - Release dma channels before dmaengine unrgister") Tested-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Koba Ko <koba.ko@canonical.com> Reviewed-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
The AEAD documentation conflates associated data and authentication tags: the former (along with the ciphertext) is authenticated by the latter. Fix the doc accordingly. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
RFC4106 wraps AES in GCM mode, and can be used with larger key sizes than 128/160 bits, just like AES itself. So add these to the tcrypt recipe so they will be benchmarked as well. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
Add support for RFC4106 ESP encapsulation to the accelerated GCM implementation. This results in a ~10% speedup for IPsec frames of typical size (~1420 bytes) on Cortex-A53. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 18 Jan, 2023 1 commit
-
-
Herbert Xu authored
Revert the changes that added p10-aes-gcm: 0781bbd7 ("crypto: p10-aes-gcm - A perl script to process PowerPC assembler source") 41a6437a ("crypto: p10-aes-gcm - Supporting functions for ghash") 3b47ecca ("crypto: p10-aes-gcm - Supporting functions for AES") ca68a96c ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation") cc40379b ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation") 3c657e86 ("crypto: p10-aes-gcm - Update Kconfig and Makefile") These changes fail to build in many configurations and are not ready for prime time. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 13 Jan, 2023 13 commits
-
-
Samuel Holland authored
At least the D1 variant requires a separate clock for the TRNG. Without this clock enabled, reading from /dev/hwrng reports: sun8i-ce 3040000.crypto: DMA timeout for TRNG (tm=96) on flow 3 Experimentation shows that the necessary clock is the SoC's internal RC oscillator. This makes sense, as noise from the oscillator can be used as a source of entropy. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Samuel Holland authored
D1 has a crypto engine similar to the one in other Allwinner SoCs. Like H6, it has a separate MBUS clock gate. It also requires the internal RC oscillator to be enabled for the TRNG to return data, presumably because noise from the oscillator is used as an entropy source. This is likely the case for earlier variants as well, but it really only matters for H616 and newer SoCs, as H6 provides no way to disable the internal oscillator. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Neal Liu authored
Add device tree binding documentation for the Aspeed Advanced High-Performance Bus (AHB) Controller. Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Neal Liu authored
Add device tree binding documentation for the Aspeed ECDSA/RSA ACRY Engines Controller. Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Neal Liu authored
Add acry & ahbc node to device tree for AST2600. Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Neal Liu authored
ACRY Engine is designed to accelerate the throughput of ECDSA/RSA signature and verification. This patch aims to add ACRY RSA engine driver for hardware acceleration. Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
The skcipher walk API implementation avoids scatterwalk_map() for mapping the source and destination buffers, and invokes kmap_atomic() directly if the buffer in question is not in low memory (which can only happen on 32-bit architectures). This avoids some overhead on 64-bit architectures, and most notably, permits the skcipher code to run with preemption enabled. Now that scatterwalk_map() has been updated to use kmap_local(), none of this is needed, so we can simply use scatterwalk_map/unmap instead. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Danny Tsen authored
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Danny Tsen authored
This perl code is taken from the OpenSSL project and added gcm_init_htable function used in the p10-aes-gcm-glue.c code to initialize hash table. gcm_hash_p8 is used to hash encrypted data blocks. Signed-off-by: Danny Tsen <dtsen@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Danny Tsen authored
This code is taken from CRYPTOGAMs[1]. The following functions are used, aes_p8_set_encrypt_key is used to generate AES round keys and aes_p8_encrypt is used to encrypt single block. Signed-off-by: Danny Tsen <dtsen@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Danny Tsen authored
Improve overall performance of AES/GCM encrypt and decrypt operations for Power10+ CPU. Signed-off-by: Danny Tsen <dtsen@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Danny Tsen authored
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Danny Tsen authored
Defined CRYPTO_P10_AES_GCM in Kconfig to support AES/GCM stitched implementation for Power10+ CPU. Added a new module driver p10-aes-gcm-crypto. Signed-off-by: Danny Tsen <dtsen@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 06 Jan, 2023 10 commits
-
-
Taehee Yoo authored
aria-avx512 implementation uses AVX512 and GFNI. It supports 64way parallel processing. So, byteslicing code is changed to support 64way parallel. And it exports some aria-avx2 functions such as encrypt() and decrypt(). AVX and AVX2 have 16 registers. They should use memory to store/load state because of lack of registers. But AVX512 supports 32 registers. So, it doesn't require store/load in the s-box layer. It means that it can reduce overhead of store/load in the s-box layer. Also code become much simpler. Benchmark with modprobe tcrypt mode=610 num_mb=8192, i3-12100: ARIA-AVX512(128bit and 256bit) testing speed of multibuffer ecb(aria) (ecb-aria-avx512) encryption tcrypt: 1 operation in 1504 cycles (1024 bytes) tcrypt: 1 operation in 4595 cycles (4096 bytes) tcrypt: 1 operation in 1763 cycles (1024 bytes) tcrypt: 1 operation in 5540 cycles (4096 bytes) testing speed of multibuffer ecb(aria) (ecb-aria-avx512) decryption tcrypt: 1 operation in 1502 cycles (1024 bytes) tcrypt: 1 operation in 4615 cycles (4096 bytes) tcrypt: 1 operation in 1759 cycles (1024 bytes) tcrypt: 1 operation in 5554 cycles (4096 bytes) ARIA-AVX2 with GFNI(128bit and 256bit) testing speed of multibuffer ecb(aria) (ecb-aria-avx2) encryption tcrypt: 1 operation in 2003 cycles (1024 bytes) tcrypt: 1 operation in 5867 cycles (4096 bytes) tcrypt: 1 operation in 2358 cycles (1024 bytes) tcrypt: 1 operation in 7295 cycles (4096 bytes) testing speed of multibuffer ecb(aria) (ecb-aria-avx2) decryption tcrypt: 1 operation in 2004 cycles (1024 bytes) tcrypt: 1 operation in 5956 cycles (4096 bytes) tcrypt: 1 operation in 2409 cycles (1024 bytes) tcrypt: 1 operation in 7564 cycles (4096 bytes) Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Taehee Yoo authored
aria-avx2 implementation uses AVX2, AES-NI, and GFNI. It supports 32way parallel processing. So, byteslicing code is changed to support 32way parallel. And it exports some aria-avx functions such as encrypt() and decrypt(). There are two main logics, s-box layer and diffusion layer. These codes are the same as aria-avx implementation. But some instruction are exchanged because they don't support 256bit registers. Also, AES-NI doesn't support 256bit register. So, aesenclast and aesdeclast are used twice like below: vextracti128 $1, ymm0, xmm6; vaesenclast xmm7, xmm0, xmm0; vaesenclast xmm7, xmm6, xmm6; vinserti128 $1, xmm6, ymm0, ymm0; Benchmark with modprobe tcrypt mode=610 num_mb=8192, i3-12100: ARIA-AVX2 with GFNI(128bit and 256bit) testing speed of multibuffer ecb(aria) (ecb-aria-avx2) encryption tcrypt: 1 operation in 2003 cycles (1024 bytes) tcrypt: 1 operation in 5867 cycles (4096 bytes) tcrypt: 1 operation in 2358 cycles (1024 bytes) tcrypt: 1 operation in 7295 cycles (4096 bytes) testing speed of multibuffer ecb(aria) (ecb-aria-avx2) decryption tcrypt: 1 operation in 2004 cycles (1024 bytes) tcrypt: 1 operation in 5956 cycles (4096 bytes) tcrypt: 1 operation in 2409 cycles (1024 bytes) tcrypt: 1 operation in 7564 cycles (4096 bytes) ARIA-AVX with GFNI(128bit and 256bit) testing speed of multibuffer ecb(aria) (ecb-aria-avx) encryption tcrypt: 1 operation in 2761 cycles (1024 bytes) tcrypt: 1 operation in 9390 cycles (4096 bytes) tcrypt: 1 operation in 3401 cycles (1024 bytes) tcrypt: 1 operation in 11876 cycles (4096 bytes) testing speed of multibuffer ecb(aria) (ecb-aria-avx) decryption tcrypt: 1 operation in 2735 cycles (1024 bytes) tcrypt: 1 operation in 9424 cycles (4096 bytes) tcrypt: 1 operation in 3369 cycles (1024 bytes) tcrypt: 1 operation in 11954 cycles (4096 bytes) Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Taehee Yoo authored
aria-avx assembly code accesses members of aria_ctx with magic number offset. If the shape of struct aria_ctx is changed carelessly, aria-avx will not work. So, we need to ensure accessing members of aria_ctx with correct offset values, not with magic numbers. It adds ARIA_CTX_enc_key, ARIA_CTX_dec_key, and ARIA_CTX_rounds in the asm-offsets.c So, correct offset definitions will be generated. aria-avx assembly code can access members of aria_ctx safely with these definitions. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Taehee Yoo authored
avx accelerated aria module used local keystream array. But, keystream array size is too big. So, it puts the keystream array into request ctx. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
David Rientjes authored
For SEV_GET_ID2, the user provided length does not have a specified limitation because the length of the ID may change in the future. The kernel memory allocation, however, is implicitly limited to 4MB on x86 by the page allocator, otherwise the kzalloc() will fail. When this happens, it is best not to spam the kernel log with the warning. Simply fail the allocation and return ENOMEM to the user. Fixes: d6112ea0 ("crypto: ccp - introduce SEV_GET_ID2 command") Reported-by: Andy Nguyen <theflow@google.com> Reported-by: Peter Gonda <pgonda@google.com> Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
GFP_DMA does not guarantee that the returned memory is aligned for DMA. It should be removed where it is superfluous. However, kmalloc may start returning DMA-unaligned memory in future so fix this by adding the alignment by hand. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
GFP_DMA does not guarantee that the returned memory is aligned for DMA. It should be removed where it is superfluous. However, kmalloc may start returning DMA-unaligned memory in future so fix this by adding the alignment by hand. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Nicolai Stange authored
The kernel provides implementations of the NIST ECDSA signature verification primitives. For key sizes of 256 and 384 bits respectively they are approved and can be enabled in FIPS mode. Do so. Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Nicolai Stange authored
ghash may be used only as part of the gcm(aes) construction in FIPS mode. Since commit d6097b8d ("crypto: api - allow algs only in specific constructions in FIPS mode") there's support for using spawns which by itself are marked as non-approved from approved template instantiations. So simply mark plain ghash as non-approved in testmgr to block any attempts of direct instantiations in FIPS mode. Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Nicolai Stange authored
cbcmac(aes) may be used only as part of the ccm(aes) construction in FIPS mode. Since commit d6097b8d ("crypto: api - allow algs only in specific constructions in FIPS mode") there's support for using spawns which by itself are marked as non-approved from approved template instantiations. So simply mark plain cbcmac(aes) as non-approved in testmgr to block any attempts of direct instantiations in FIPS mode. Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-